DAC does not synchronize the tables of Informatica
Hello
I'm new to OBIEE although I experience Informatica. I created a mapping and the workflow. DAC, I created the new folder logical and physical. Creates a new task and provided the name of the task and logical record and other details. When I try to "Synchronize the tasks", I get a message of success with the names of the tables as expected. The DAC journal file is below.
-The Sync task has begun-
Requested workflow is exported to C:\DAC\dac\repository\taskSync\.
New source/target tables are inserted in the DAC metadata.
Exported xml files are removed from C:\DAC\dac\repository\taskSync.
-Sync task completed.
It is not question of DAC with Informatica repository communication or integration service as connection test results are ok.
In Windows command prompt, pmcmd and pmrep works fine.
Can you please help me out here, as I'm stuck here and not able to go further.
I checked the DAC server log. It shows a serious error. I copy the same thing here.
12 INFO Fri May 02 09:46:09 EDT 2014 reading repository properties
INFO 13 Fri May 02 09:46:09 EDT 2014 reading repository properties
14 INFO Fri May 02 09:46:10 EDT 2014 reading execution types
15 INFO executors of sync Fri May 02 09:46:10 EDT 2014
16 SEVERE Fri May 02 09:46:10 EDT 2014 audit the localhost with the values defined in the DAC repository!
INFO 17 Fri May 02 09:46:10 EDT 2014 add server name: localhost
INFO 18 Fri May 02 09:46:10 EDT 2014 adding replacing servername: unspecified
19 SEVERE Fri May 02 09:46:12 EDT 2014 Unknown host Unspecified. Error message: unspecified
Fri May 02 20 INFO 09:46:12 EDT 2014 bound to port 3141
INFO 21 Fri May 02 09:46:12 EDT 2014 creation ClientMessage dispatcher with 2 worker threads
INFO 22 Fri May 02 09:46:12 EDT 2014 no competition, only ETL can work both and it will run in the same process space.
NEWS 23 Fri May 02 09:46:12 EDT 2014 SERVER_NETWORK_MESSAGE: Created ClientMessage dispatcher with 2 worker threads
Fri may 02 24 INFO 09:46:12 EDT 2014 com.siebel.etl.net.ClientMessageDispatcher registered with HeartBeatManager
Thanks for your help,
Ananth
You can ignore any additional flat file as the source for the task in CAD.
Make sure what you do know about informatica
Pls don't change the original message! If you want to add anything, you can go to meet.
I think that you are ready to go to close
Tags: Business Intelligence
Similar Questions
-
Does not receive the table name in the list of schema objects creating EO
Hello
IAM does not have my name of the table custom in the list of schema objects during the creation of EO.
I created a custom table and I need to use this table looks for creation EO,
But while creating the EO, I'm not able to find the table in the schema object list.
in the connection database, these tables are present, but only in this window (window of creation of Eo) these tables do not come
can someone please help how to solve this problem.
Hello
I found the solution
in business components that there is another database link that I've changed now, it works fine now
-
Database will return no error, but does not delete the table
Hello
I'm developing an application that uses a database (SQLite). I would like to delete and re-create a table in the database (this table is the kind of a cache).
When I run the following code, I get no error but chrome / ripple-> resources-> "Web SQL", I still see the old structure of the table.
Do you have any idea what the problem might be or how I can solve it?
db.transaction( function (tx) { tx.executeSql('DROP TABLE IF EXISTS users',[],function (tx, res) {}, function (tx, err) {alert(err.message)}); tx.executeSql('CREATE TABLE users (firstname, lastname, phonenumber, emailadd, company)',[],function (tx, res) {}, function (tx, err) {alert(err.message)}); for (var i = 0; i < oPerson.length; i++) { tx.executeSql('INSERT INTO users (firstname, lastname, phonenumber, emailadd, company) VALUES ("' + oPerson[i].Firstname + '", "' + oPerson[i].Lastname + '", "' + oPerson[i].Phonenumber + '", "' + '", "' + oPerson[i].Emailadd + '", "' + oPerson[i].Company + '")'); iUsers = iUsers + 1; } } );
Thank you very much
Roberto.
Hello Roberto,
There was a problem with your INSERT INTO string where you have provided additional value which did not exist as a database column. Change
oPerson[i].Phonenumber + '", "' + '", "' + oPerson[i].Emailadd
TO
oPerson[i].Phonenumber + '", "' + oPerson[i].Emailadd
Here's a complete code that must run:
var db = openDatabase('mydb', '2.0', 'Test DB', 4 * 1024 * 1024); var iUsers = 0; var oPerson = [{Firstname: 'Joe', Lastname: 'Smith', Phonenumber: '1800CALLJOE', emailadd: '[email protected]', Company: 'Photojam'}, {Firstname: 'Jack', Lastname: 'Smith', Phonenumber: '1800JACK999', emailadd: '[email protected]', Company: 'Photojam'} ]; db.transaction( function (tx) { tx.executeSql('DROP TABLE IF EXISTS users',[],function (tx, res) {}, function (tx, err) {alert(err.message)}); tx.executeSql('CREATE TABLE users (firstname, lastname, phonenumber, emailadd, company)',[],function (tx, res) {}, function (tx, err) {alert(err.message)}); for (var i = 0; i < oPerson.length; i++) { tx.executeSql('INSERT INTO users (firstname, lastname, phonenumber, emailadd, company) VALUES ("' + oPerson[i].Firstname + '", "' + oPerson[i].Lastname + '", "' + oPerson[i].Phonenumber + '", "' + oPerson[i].Emailadd + '", "' + oPerson[i].Company + '")'); iUsers = iUsers + 1; } } );
Let me know if there are problems!
See you soon,.
James
-
JTable with custom column model and model table does not display the table header
Hello
I create a JTable with a custom table model and a custom column template. However the table header is not displayed (Yes, it's in a get). I have narrowed the problem down in one compilable example:
Thanks for your help.
Published by: 802416 on October 14, 2010 04:29import javax.swing.*; import javax.swing.table.*; public class Test1 extends JFrame { public static void main(String args[]) { JTable table; TableColumnModel colModel=createTestColumnModel(); TestTableModel tableModel=new TestTableModel(); Test1 frame=new Test1(); table=new JTable(tableModel, colModel); frame.getContentPane().add(new JScrollPane(table)); frame.setSize(200,200); frame.setVisible(true); } private static DefaultTableColumnModel createTestColumnModel() { DefaultTableColumnModel columnModel=new DefaultTableColumnModel(); columnModel.addColumn(new TableColumn(0)); return columnModel; } static class TestTableModel extends AbstractTableModel { public int getColumnCount() { return 1; } public Class<?> getColumnClass(int columnIndex) { return String.class; } public String getColumnName(int column) { return "col"; } public int getRowCount() { return 1; } public Object getValueAt(int row, int col) { return "test"; } public void setValueAt(Object aValue, int rowIndex, int columnIndex) { } } }
addedSee http://download.oracle.com/javase/6/docs/api/javax/swing/table/TableColumn.html#setHeaderValue (java.lang.Object)
When the TableColumn is created, the default headerValue is null
So the header ends up rendered empty label (probably of size 0 if the JTable calculates its size of header based on the size of the default rendering tool).It worked:
private static DefaultTableColumnModel createTestColumnModel() { DefaultTableColumnModel columnModel=new DefaultTableColumnModel(); TableColumn col = new TableColumn(0); col.setHeaderValue("Header Title"); columnModel.addColumn(col); return columnModel; }
Published by: jduprez on October 14, 2010 14:09
Beaten by a fraction of a second!Published by: jduprez on October 14, 2010 14:10
OK, by a split of 17 minutes, specifically: o) -
I use 11g on Redhat
After race run dbms_stats.gather_fixed_objects_stats not change date last_analyzed in DBA_TAB_STATISTICS for table X$ KTURDIn our database entry dba_tab_statistics to the fixed point of view shows only NULL values.
Any query that object exist in our databases show 'now, the selected lines.See you soon
FJFranken -
My TV picture is broken and does not synchronize
My Win 7 cpu is intel pentium G630 processor @2.7 GHz - 6 GB memory - 64 bit - purchased and installed Auvitek video and game controller
with the digital HDTV stick capture for TV watch and record.
Picture Pixelation much and does not synchronize the sounds. Indicator signal TV is about 50% according to the indicator of the software.
Please let me know what I need to fix the problem. Should I buy a better video card? The video card is certified by Microsoft as
According to the manufacturer specifications.
Thank you, John
E-mail address is removed from the privacy *.
You have downloaded and installed the latest driver for tv tuner card? If this isn't the case, visit the tv tuner card manufacturer's Web site to do the same.
What exact video card is there? Open Device Manager, expand display adapters to find what graphic card is there. -
DMZ-Link bandwidth does not change the routing table countin traffic
Hey guys
I'm INE laboratories dong and shoved a weird one that delivers.
I have configured the dmz-link bandwidtha nd the extended communities to send, I get the bandwidth in the BGP routes, however the routing table does not change the proportion of traffic according to the bandwidth available link.
Here is my configuration:
Rack1R6 (config) #do sh run | dry BGP
router bgp 100
no synchronization
The log-neighbor BGP-changes
BGP dmzlink-bw
155.1.146.0 netmask 255.255.255.0
aggregate-address 155.1.0.0 255.255.0.0 summary only
neighbour 54.1.1.254 distance-54
neighbor 54.1.1.254 dmzlink-bw
neighbour 155.1.67.7 distance-300
neighbour 155.1.146.1 distance-100
155.1.146.1 neighbor send-community times
No Auto-resume
Rack1R6 (config) #.
Rack1R6 (config) #do sh ip bgp neigh 155.1.146.1 opponents
Version of BGP table is 35, local router ID is 150.1.6.6
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* > 28.119.16.0/24 54.1.1.254 0 54 I
* > 28.119.17.0/24 54.1.1.254 0 54 I
* > 112.0.0.0 54.1.1.254 0 0 54 50 60 I
* > 113.0.0.0 54.1.1.254 0 0 54 50 60 I
* > 114.0.0.0 54.1.1.254 0 0 54 I
* > 115.0.0.0 54.1.1.254 0 0 54 I
* > 116.0.0.0 54.1.1.254 0 0 54 I
* > 117.0.0.0 54.1.1.254 0 0 54 I
* > 118.0.0.0 54.1.1.254 0 0 54 I
* > 119.0.0.0 54.1.1.254 0 0 54 I
r > 155.1.0.0 0.0.0.0 32768 I
Rack1R6 (config) #do sh ip bgp
Version of BGP table is 35, local router ID is 150.1.6.6
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* i28.119.16.0/24 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 54 i
* i28.119.17.0/24 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 54 i
* i112.0.0.0 204.12.1.254 0 100 0 54 50 60 I
* > 0 0 54 50 60 54.1.1.254 I
* i113.0.0.0 204.12.1.254 0 100 0 54 50 60 I
* > 0 0 54 50 60 54.1.1.254 I
* i114.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
* i115.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
* i116.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
* i117.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
* i118.0.0.0 204.12.1.254 0 100 0 54 I
Network Next Hop path metrics LocPrf weight
*> 54.1.1.254 0 0 54 i
* i119.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
r i155.1.0.0 155.1.146.4 0 100 0 I
r> 0.0.0.0 32768 i
s > 155.1.146.0/24 0.0.0.0 32768 0 I
* > i205.90.31.0 155.1.13.3 0 100 0 200 254?
* 155.1.67.7 0 300 200 254?
* > i220.20.3.0 155.1.13.3 0 100 0 200 254?
* 155.1.67.7 0 300 200 254?
* > i222.22.2.0 155.1.13.3 0 100 0 200 254?
* 155.1.67.7 0 300 200 254?
Rack1R6 (config) #.
# now R4 configuration
Rack1R4 (config) #do sh run | dry BGP
router bgp 100
no synchronization
The log-neighbor BGP-changes
BGP dmzlink-bw
155.1.146.0 netmask 255.255.255.0
aggregate-address 155.1.0.0 255.255.0.0 summary only
neighbour 155.1.45.5 distance-200
155.1.45.5 route-neighbour card GAME-54 on
neighbour 155.1.146.1 distance-100
155.1.146.1 neighbor send-community times
neighbour 204.12.1.254 distance-54
neighbor 204.12.1.254 dmzlink-bw
No Auto-resume
Rack1R4 (config) #.
Rack1R4 (config) #do sh ip bgp Synt.
Local router BGP 150.1.4.4 identifier UNDER number 100
BGP table version is 18, table 18 main routing version
15 entries for network using 1980 bytes of memory
18 entries for path using 936 bytes of memory
9/7 BGP path/bestpath attribute entered using 1512 bytes of memory
3 entries for BGP AS-path ACCESS using 72 bytes of memory
1 entries PMO community, using 24 bytes of memory
0 cache entries of BGP route-map with 0 bytes of memory
0 cache entries of filter-list BGP using 0 bytes of memory
Bit entries in the cache field: 3 courses (up to 5) with 96 bytes of memory
BGP using 4620 total number of bytes of memory
Activity 102/87 BGP prefixes, 243/225, scan interval to 60 seconds
Neighbor MsgRcvd MsgSent V AS TblVer InQ OutQ Up/Down State/PfxRcd
155.1.45.5 4 200 8615 8640 18 0 0 07:38:02 3
155.1.146.1 4 100 8761 8668 18 0 0 00:14:34 3
204.12.1.254 4 54 8724 8595 18 0 0 07:38:02 10
Rack1R4 (config) #do sh ip bgp
BGP table version is 18, local router ID is 150.1.4.4
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* > 28.119.16.0/24 204.12.1.254 0 0 54 I
* > 28.119.17.0/24 204.12.1.254 0 0 54 I
* > 112.0.0.0 204.12.1.254 0 54 50 60 I
* > 113.0.0.0 204.12.1.254 0 54 50 60 I
* > 114.0.0.0 204.12.1.254 0 54 I
* > 115.0.0.0 204.12.1.254 0 54 I
* > 116.0.0.0 204.12.1.254 0 54 I
* > 117.0.0.0 204.12.1.254 0 54 I
* > 118.0.0.0 204.12.1.254 0 54 I
* > 119.0.0.0 204.12.1.254 0 54 I
* > 155.1.0.0 0.0.0.0 32768 I
s > 155.1.146.0/24 0.0.0.0 32768 0 I
* i205.90.31.0 155.1.13.3 0 100 0 200 254?
*> 155.1.45.5 0 200 254 ?
* i220.20.3.0 155.1.13.3 0 100 0 200 254?
*> 155.1.45.5 0 200 254 ?
* i222.22.2.0 155.1.13.3 0 100 0 200 254?
Network Next Hop path metrics LocPrf weight
*> 155.1.45.5 0 200 254 ?
Rack1R4 (config) #do sh ip bgp neigh 155.1.146.1 opponents
Rack1R4 (config) #do sh ip bgp neigh 155.1.146.1 opponents
BGP table version is 18, local router ID is 150.1.4.4
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* > 28.119.16.0/24 204.12.1.254 0 0 54 I
* > 28.119.17.0/24 204.12.1.254 0 0 54 I
* > 112.0.0.0 204.12.1.254 0 54 50 60 I
* > 113.0.0.0 204.12.1.254 0 54 50 60 I
* > 114.0.0.0 204.12.1.254 0 54 I
* > 115.0.0.0 204.12.1.254 0 54 I
* > 116.0.0.0 204.12.1.254 0 54 I
* > 117.0.0.0 204.12.1.254 0 54 I
* > 118.0.0.0 204.12.1.254 0 54 I
* > 119.0.0.0 204.12.1.254 0 54 I
* > 155.1.0.0 0.0.0.0 32768 I
* > 205.90.31.0 155.1.45.5 0 200 254?
* > 220.20.3.0 155.1.45.5 0 200 254?
* > 222.22.2.0 155.1.45.5 0 200 254?
Total number of prefixes 14
Rack1R4 (config) #.
# and where is the real problem, R1
Rack1R1(config-Router) #do sh ip bgp
Version of BGP table is 15, local router ID is 150.1.1.1
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* i28.119.16.0/24 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i28.119.17.0/24 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i112.0.0.0 54.1.1.254 0 100 0 54 50 60 I
* > I 204.12.1.254 0 100 0 54 50 60 I
* i113.0.0.0 54.1.1.254 0 100 0 54 50 60 I
* > I 204.12.1.254 0 100 0 54 50 60 I
* i114.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i115.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i116.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i117.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i118.0.0.0 54.1.1.254 0 100 0 54 I
Network Next Hop path metrics LocPrf weight
* > I 204.12.1.254 0 100 0 54 I
* i119.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i155.1.0.0 155.1.146.6 0 100 0 I
* > I 155.1.146.4 0 100 0 I
* > 205.90.31.0 155.1.13.3 0 200 254?
* i 155.1.45.5 0 100 0 200 254?
* > 220.20.3.0 155.1.13.3 0 200 254?
* i 155.1.45.5 0 100 0 200 254?
* > 222.22.2.0 155.1.13.3 0 200 254?
* i 155.1.45.5 0 100 0 200 254?
Rack1R1 (config - Router) # do sh ip bgp 112.0.0.0
112.0.0.0/8, version 4 BGP routing table entry
Paths: (2 available, best #2, table by default-IP-Routing-Table)
MPIO: eBGP iBGP
Announced for the update-groups:
1 2
54 50 60, (from a customer-RR)
54.1.1.254 (metric 2560002816) of 155.1.146.6 (150.1.6.6)
Origin, IGP, 0, 100, valid, internal multipath localpref metric.
DMZ-Link Bw 250 KB
54 50 60, (from a customer-RR)
204.12.1.254 (metric 2560002816) of 155.1.146.4 (150.1.4.4)
Origin, IGP, metric 0, localpref 100, valid, internal, multipath, best
DMZ-Link Bw 12500 KB
Rack1R1(config-Router) #do sh ip route 112.0.0.0
Routing for 112.0.0.0/8 entry
Known through 'bgp 100', 200, 0 distance metric
54, internal type tag
Last update of 204.12.1.254 ago 00:15:30
Routing descriptor blocks:
204.12.1.254, 155.1.146.4, there is 00:15:30
Path metric is 0, number of shares of traffic 1
AS hop 3
Beacon road 54
* 54.1.1.254, 155.1.146.6, there is 00:15:30
Path metric is 0, number of shares of traffic 1
AS hop 3
Beacon road 54
Rack1R1 (config - Router) #.
as you can see, the BGP process in R1 receives the correct link DMZ bw but not indeed take...
can you please help me if I makeover anything in my setup?
Hello
Can you please make sure you have a value of bandwidth on ALL your BGP peering physical interfaces? And you can also include the running-config 'router bgp XXXX' out of R1 as you have not understood what we (others are). Just to make sure that you have "bgp dmzlink-bw' configured on all peerings and overall in the process - it will still show in the output of the same community if it does not work on it.
-
iCloud does not synchronize my MBP 2013 (OSX 10.9.5) end and my iPhone 5 (iOS 9.3.1) the same thing. Mail sent to me via my mail ID Apple gets to my iPhone, but not for my MBP.
Connection/window/mail doctor show what? If the server is red, select it and observe the box show details.
-
Look at the calendar entry does not synchronize
Watch ver 2.1 (S 13, 661), watch OS 2.1: when you enter the entrance of the calendar, with Siri, the watch does not synchronize with the Iphone 5 s worm 9.2 (13 c, 75). IOS 9.2.1.
Hello
Do not forget that Apple Watch shows the events you have planned or have been invited in for today and next week. Anything beyond that will not appear on your watch until closer to the time.
If not, please clarify what you mean by "does not synchronize.
-
Look at the calendar does not synchronize
Sun software is up to date. Watch couples with the IPhone. Look at the calendar does not synchronize.
HI - try the following steps:
On your iPhone, in the application of the watch, go to: Watch My > calendar > make sure you have selected your preferred settings (mirror my iPhone or Custom).
On your iPhone, in the application of the watch, go to: Watch My > General > reset > press reset sync data. Nothing appears to happen, but the process will be executed in the background - allow a minute or two.
It can also help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:
-To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;
-To switch on: press and hold the side button until you see the Apple logo.
-
E/s files does not save the items in the table
I can't save the items in the table. If I quit the program and restart it, the array starts at 0 again. I want it from the value at which it stopped.
Is this a flaw in the Subvi "Timer A1"?
Thanks for the help.
mhaque
Your feedback nodes are defined overall boot on the first call, as evidenced by the glyphs. If you are stop and start your program, must be configured to initialize worldwide on the compilation or the load, simply right-click and change the setting. This should give you the behavior you're looking for, but does not exclude the intrinsic problems with the code.
-
After trying to fix the error of time synchronization by typing net start w32time that receipt of the message in the title. In addition, type net stop w32time responded that the service was not working.
Original title: the executable that this service is configured to run does not implement the service
After checking the configuration in the registry and check or update if necessary from the link below:
Then the time errors that I got from the command prompt window:
Order--> net stop w32time & net start w32time
Response--> The Windows Time service is not started.Order--> net start w32time
Response--> system error 1083.
The executable program that this service is configured to run in does not implement the service.--> Command w32tm/Resync /rediscover
Response--> sending command to local computer resync...
The following error occurred: the RPC server is unavailbale. (0x800706BA)Hi Mitchell_G,
Thank you for keeping us posted.
The steps of items offered in the previous post?
We know if you need help. We will be happy to help you.
Thank you.
-
BlackBerry Smartphones BB does not synchronize with the Desktop Manager
Suddenly, my BB 8220 does not synchronize with my Desktop Manager. He tries to synchronize the calendar and then I get an error message: BlackBerry desktop has encountered a problem and needs to close. It should also synchronize my contacts and tasks, but does not get it until now. My DeskTop Manager is version 4.3. All solutions?
Hey ShelleyPringle,
Welcome to the community of BlackBerry Support Forums.
I suggest you upgrade your BlackBerry Desktop Software and then try to sync.
Go to www.blackberry.com/desktop to get the software and then try to perform the synchronization.
-
ADF table selected displayRow does not display the selected line
Hello
JDev 11.1.2.4
I have a table with selection enabled and displayRow property the value selected. In the workflow, I have an ExecuteWithParams activity, and then a method activity that restores the current iterator of the line. Finally the activity view that displays the table.
Restore the current line with key
Iterator DCIteratorBinding = ADFUtils.findIterator ("MyIterator");
iterator.setCurrentRowWithKey (currentKey); currentKey is a string
The question I have is that the current line is properly restored, but the table does not display the page of "range" of the current line while the displayRow is the selected value. My table has 500 rows, the table displays the top 25 while the current line is the 500th line. I expect the table to display the line 475 to 500 line.
What I am doing wrong?
Thank you
You can save the index lines before executing your method and then set the iterator to this index.
The technique is described in this blog https://tompeez.wordpress.com/2016/02/12/naviagting-an-aftable-in-pagination-mode-from-a-bean/
Timo
-
Muse file does not synchronize. I can't use the Cloud
Your Muse staff, asked me to put this issue on creative cloud, as the Muse file does not synchronize:
Could you please help me?
Hi Hanna,
I check with a member of the team of Muse to see if there is something else you can do.
Thank you
Preran
Maybe you are looking for
-
Dictionary by double clicking on a word in the text don't work at IOS 10
Since yesterday I installed IOS10 in my iPad Pro, when I read an e-book and I double click on a Word, there is no option. I closed the application and he straightened, closed the iPad and turned back on and the problem persists. In iBooks, the screen
-
Not loadable VI when inserting GetPropertyValue
Hello I created a simple dialog box in Labview that opens a window to insert a number that is returned in the form of output and TestStand defined on a StationGlobal. Now, the idea was to read the current value of this StaionGlobal and the preset dia
-
I started to do a program to monitor some measurement devices that measure permanently: flow, temperature and pressure of the water. There are many limits to the user set. For each meter (there are 3) the user can set soft limits for the 3 parameters
-
Cannot install service pack 1 for Vista
For almost 2 years, I try to install service pack 1. When installing to part 3 of 3 back changes and is not installed. I called the Vista support almost 10 times, they also helped me online. I've tried everything.What can I do?
-
I use Windows XP with Internet Explorer 8 and Outlook express 6. Until 10 days ago everything worked very well. Then everything changed. Now, Outlook Express starts to load up and "authorising officer" appears on the bottom of the screen, as if the m