Error loading C:\Users\gelwix\AppData\local\temp\

How can I get rid of this message when I start?  Error loading C:\Users\gelwix\AppData\local\temp\

Hello

1. What is the version of the operating system installed on your computer?

2 have you made changes on the computer before this problem?

3. What is the exact full error message?

Then follow the mentioned methods:

Method 1:

Use a tool like autoruns to locate the reference and delete it.

Autoruns:http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

Method 2:

If you use windows XP follow this:

Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

How to configure Windows XP to start in a "clean boot" State

http://support.Microsoft.com/kb/310353

Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

 

If you are using Windows Vista or Windows 7 follow this:

Perform the clean boot and check.

 

To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

http://support.Microsoft.com/kb/929135


Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

 

 

I hope that the above information is useful!

Tags: Windows

Similar Questions

  • When I start my computer, I get an error message «Error loading C:\Users\jimhoss\AppData\Local\Temp\...» »

    When I start my computer, I get three error messages concerning three different files.  They all have the same path and they all say
    "Error loading C:\Users\jimhoss\AppData\Local\Temp\bsipi.dll".
    "Error loading C:\Users\jimhoss\AppData\Local\Temp\udilt.dll".
    "Error loading C:\Users\jimhoss\AppData\Local\Temp\mounINFO.dll".

    I have Malwarebytes and run it a couple of times and I remove all the files it detects as malicious, but I still receive these error messages when I start my computer.  I also have MS Vista.

    Hello

    They seem to be the remnants entered boot for malware.

    Malwarebytes is normally very good to remove things like that.

    The problem persists after scanning, take these startup entries:

    "How to use MSCONFIG in Windows Vista"

    http://www.netsquirrel.com/Msconfig/msconfig_vista.html

    You can also use this free program to do, too:

    "Autoruns for Windows V11.32"

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

    See you soon.

  • system starts with the following error: runDLL - error loading C:\Users\Hav\AppData\Local\Temp\hnszs0.exe

    Original title: runDLL Error Message

    When I start the computer I have an error: runDLL - error loading C:\Users\Hav\AppData\Local\Temp\hnszs0.exe - the specified module could not be found.  How can I fix it?

    Hello

    1. don't you make changes to the computer until the problem occurred?

    I suggest you to try the steps below and check if it helps.

     

    Method 1: Try to start your system in safe mode and check if the same problem occurs.

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

     

    Method 2 : If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

    By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

     

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

    Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

    In addition, please see the link below with a similar problem reported.

    Help with RunDLL error on startup

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/help-with-RUNDLL-error-on-startup/e929b39c-55d1-4EA4-A5A0-b38733286d84

    Hope this information is useful.

  • Error loading C:\Users\Richard\AppData\Local\Temp\cerdr.dll. The specified module could not be found

    The PC boot-to top every morning, I get this message. Can I please ask for some advice on how I can solve this problem, thank you.

    Hello LewBut,

    I'd say go throught he link below and try the suggestions of the SpiritX MS MVP.  How long have you encountered this message when you start your computer?

    Error loading C:\...".dll" the specified module is not found.
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/error-loading-CDLL-the-specified-module-could-not/c21f0647-98EA-4170-9fca-90b5fcc5273a

    In addition,

    DLL of enforcement, error loading

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/run-dll-error-loading/02dbc0c6-fed0-4B7E-97ab-1245e9f43939

    Thank you

    James

  • RUNDLL error loading C:\Users\Gail\AppData\Local\Temp\fontftp.dll the specified module could not be found

    This message appeared on start up after I installed my new printer. How can I get rid of him? Thank you

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hello

    This is the probably the result of malware then do a very thorough check and when the
    the system is clean see the following message to remove this error.

    If you need search malware here's my recommendations - they will allow you to
    scrutiny and the withdrawal without ending up with a load of spyware programs running
    resident who can cause as many questions as the malware and may be more difficult to detect as the
    cause.

    No one program cannot be used to detect and remove any malware. Added that often easy
    to detect malicious software often comes with a much harder to detect and remove the payload. Then
    its best to be thorough than paying the high price later now too. Check with them to one
    extreme overkill point and then run the cleaning only when you are sure that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
    the regular windows when you can.

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
    (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can
    Download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
    security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
    here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
    (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
    what you have done (such as antivirus, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    New Vista and Windows 7 version
    http://OneCare.live.com/site/en-us/Center/whatsnew.htm

    Original version
    http://OneCare.live.com/site/en-us/default.htm

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
    system files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Error loading C:\users\Brad\appdata\local\temp\cmmoiles.dll

    What is cmmoiles.dll

    I can't find anything about this file, see bing, google, drive c; nothing? I get this error:

    Hello

    Since its in a temporary area, you may have dodged a bullet. Better to delete the file, if it exists, then
    remove the error message.

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    Autoruns - free - see what programs are configured to startup automatically when your system boots and you
    opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
    start the settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Error loading C;\users\Toshiba\appData\Local\SMBDP.dll

    Can someone help me?
    Once I start, I get a message that says: error loading C;\users\Toshiba\appData\Local\SMBDP.dll, then the module is not found.
    I tried everything but can't get rid of it,

    I asked for help online, but he told me to buy a tune-up utilities, but I already have untilities tune-up and have run through completely but it always does'nt work.

    Help, please.

    Hello

    TO be honest, this file is unknown to me. I searched using Google, but I couldn't find anything :(

    You can try a system restore to an earlier point or what have you done since you got this error message?

  • Error loading C:\Users\Bo\AppData\Local\ukohixowe.dll is not a valid Win32 application

    Original title: ukohixowe.dll

    I have the following error message appears whenever I start Windows Vista:

    Error loading C:\Users\Bo\AppData\Local\ukohixowe.dll
    C:\Users\Bo\AppData\Local\ukohixowe.dll is not a valid Win32 application.
    In addition to the error message when my PC goes into mode 'sleep' & the monitor turns off, I am unable to wake up the screen saver.
    What is this error and how to fix it & the problem of monitor

    Hi Adrien,.

    According to the description, it seems that you are having problems with the startup error message and the computer doesn't wake up from its sleep.

    Follow the suggestions below for a possible solution:

    Method 1: I suggest you perform the clean boot and check if the problem persists.

    Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

     

    Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 3 of the article mentioned above.

    Method 2: Try the SFC (System File Checker) scan on the computer.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Method 3: For the question about the computer is not waking from sleep, you may read the following article and check.

    A Windows Vista-based computer resumes the mode not sleep if you move or click a USB mouse as the computer is switch to sleep mode

     

    http://support.Microsoft.com/kb/930091

    It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  • How can I fix this error?-"Error loading C:\Users\Owner\AppData\Local\ufohudusiboqudo.dll" the specified module could not be found

    How can I fix this error?-"Error loading C:\Users\Owner\AppData\Local\ufohudusiboqudo.dll" the specified module could not be found

    Hello

    Google has no informatrion on this (ufohudusiboqudo.dll), so it's probably the Malware that your Antivirus has deleted, but who left a start for her entry.

    Download, install, update and scan with the version FREE of Malwarebytes AntiMalware:

    http://www.Malwarebytes.org/products/malwarebytes_free

    If the error persists after scanning, use this FREE program to delete startup entries:

    This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

    See you soon.

  • Get error in Vista, error loading c:\Users\Marie\AppData\Local\usbcrtRpl\sysWebman.dl lthis specified module could not be found

    Recently received a message from RunDLL when I start.

    Error loading c:\Users\Marie\AppData\Local\usbcrtRpl\sysWebman.dl lthis specified module could not be found.

    Ive already scanned for malware using Malwarebytes found nothing.

    What should do? Help, please. Thank you in advance.

    * original title - how to get rid of the error message at startup upwards *.

    Hello

    Cannot find this file on Google so you probably dodged some software malware and you should do a
    very thorough control. Message on how to remove the error message if still it y
    After the audits of malware.

    If you need search malware here's my recommendations - they will allow you to
    scrutiny and the withdrawal without ending up with a load of spyware programs running
    resident who can cause as many questions as the malware and may be more difficult to detect as the
    cause.

    No one program cannot be used to detect and remove any malware. Added that often
    easy to detect malicious software often comes with a much harder to detect and remove the
    payload. So its best to be now too thorough than paying the high price later. Check
    with an extreme overdose point and then run the cleaning only when you are very
    that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap you start, however, you should
    also run in regular Windows when you can.

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
    (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/products/malwarebytes_free

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can
    Download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
    programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
    Use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
    (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
    what you have done (such as antivirus, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    -----------------------------------

    Original version is now replaced by the Microsoft Safety Scanner
    http://OneCare.live.com/site/en-us/default.htm

    Microsoft safety scanner
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    ----------------------------------

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
    files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
    turn it back on.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Error message: "error loading C:\Users\Sue\AppData\Local\WMPDBDL.dll the specified module is not found."

    I have an error message box that always appears at the start of my computer.  It says: "Error loading C:\Users\Sue\AppData\Local\WMPDBDL.dll the specified module is not found." I have a Dell Laptop Inspiron 1720 running Vista. I just 'X' it out and continue on but would like to get rid of it.  I don't know that it's touched something that needs correction.  Thank you

    Hello

    Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If the error persists after scanning use this program to out startup

    This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  • run dll error loading C:/users/mike/AppData/Local/uwamocin.dll module could not be found...

    I am running windows vista Home premium. When my screen, I get an error loading c:\Users[user-name]\Music\iTunes\iTunes/mike/AppData/Local/uwamocin.dll module could not be found. My internet explore continues to mess up and running slow, I had other problems too, I think it's related. Is there a way to obtain another dll to replace this lack?

    Hello

    A Google search has nothing on "uwamocin.dll", which suggests that it is associated with Malware.

    Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

    http://www.Malwarebytes.org/products/malwarebytes_free

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    If the problem persists after scanning, take these startup entries:

    "How to use MSCONFIG in Windows Vista"

    http://www.netsquirrel.com/Msconfig/msconfig_vista.html

    You can also use this free program to do, too:

    "Autoruns for Windows V11.32"

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

    See you soon.

  • Startup error message: "error loading C:\users\lounders\AppData\Local\rat3eP.dll".

    Original title: How can I fix this I did nothing... loadingC:\users\lounders\AppData\Local\rat3eP.dll .error

    whenever I turn on the computer this message arrives. to my knowledge, noone was key as my computer but this message still pops up.   error loadingC:\users\lounders\AppData\Local\rat3eP.dll

    http://www.google.com.au/search?hl=en&source=HP&q=rat3eP.dll&aq=f&aqi=&AQL=&OQ=&gs_rfai=

    There's an lck of info on it; It is probably Malware.

    You could have, or still are, infected by malware; and it could also be a starting top left him entry.

    Malware scan:

    http://www.Malwarebytes.org/MBAM.php

    Malwarebytes is as its name suggests, a Malware Remover!

    Download the free Version from the link above.

    Download, install, upgrade and scan once a fortnight...

     

    How to use Malwarebytes once it is installed and updated:

    1. open Malwarebytes > click the update tab at the top > get the latest updates.

    2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

    3 MBAM will now start to scan your computer for malware. This process can take some time.

    4. when the scan is complete, a message box will appear

    5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

    6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

    7. a screen showing all of the malware displayed the program that is

    8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

    9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

    10. you can now exit the MBAM program.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the error persists after scanning, use the program to out startup:

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

    This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

    See you soon.

    Mick Murphy - Microsoft partner

  • When starting my laptop I get message thefollowing: error loading C:\Users\Gerard\AppData\Local\madlot.dll and the statement 'the specified module could not be found' how can I fix it?

    The only thing I've done a bit before you make this mistake was to make a 'disk cleanup' and 'defragmentation' the day earlier.

    Hello

    Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If the error persists after scanning use this program to out startup

    This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  • Error loading C:\Users\kiebrea\AppData\Local\itavapupikepeqe.dll__The specified module could not be found.

    How can I reinstall the missing dll?

    ·                                You could have, or still are, infected by malware; and it could also be a starting top left him entry.

    Malware scan:

    http://www.Malwarebytes.org/MBAM.php

    Malwarebytes is as its name suggests, a Malware Remover!

    Download the free Version from the link above.

    Download, install, upgrade and scan once a fortnight...

     

    How to use Malwarebytes once it is installed and updated:

    1. open Malwarebytes > click the update tab at the top > get the latest updates.

    2. on the Scanner tab, make sure that thePerform quick scan option is selected and then click on theScan button to start scanning your computer

    3 MBAM will now start to scan your computer for malware. This process can take some time.

    4. when the scan is complete, a message box will appear

    5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

    6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

    7. a screen showing all of the malware displayed the program that is

    8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

    9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

    10. you can now exit the MBAM program.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the error persists after scanning, use the program to out startup:

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

    This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

    See you soon.

    Mick Murphy - Microsoft partner

Maybe you are looking for

  • iTunes Sync of Photo cannot read the Photos Album

    Hello... Recently I met a problem when you try to synchronize my iP7 with the album in my Photos app. I am running Mac Sierra with Photos app. My case is when I connect my iPhone to iTunes, click on the tab of the photo, she nows takes more than 2 mi

  • New double tactility of Libretto W100

    We just bought the new Libretto W100 with Panel double touch screen, but we do not think very well with the 'sensitivity' of the 'touch': sometimes we touch the screen and nothing happens, but if you touch slightly more strong that works like the 'do

  • read raw or gif files

    I have stored data in two different ways, either will do to get the data giff files must be: read - poster - written as 2d intensity data I also have raw files (I saved as a .csv otherwiese forums won't let me post) which contain the same data but I

  • How to add contacts on BBM BlackBerry Smartphones? If we do not know email address and pin code?

    BlackBerry 9220 curve

  • Align stroke will not work in Adobe CS 5 Illustator

    Hi, I am trying to align a line around an object that was created using the tool pen in Illustrator.  It is the version of Adobe Creative Suite CS5, using Windows XP on a Dell Inspiron.After opening an Illustrator, I created a new file / page of dega