IDT Audio system tray app has encountered a problem - sttray.exe and lack of Windows\system32\spool\drivers\w32x86\3\DLCJtime.dll entry: RUNDLLEntry at Windows startup.

Similar Questions

• Audio Board error, "IDT audio system tray application has encountered a problem and needs to close" at startup

  On startup, I get "IDT audio system tray application has encountered a problem and needs to close." How can I fix it?

  By replacing the file mixer...

  Right click on my computer > in the drop-down list on the left click on explore > in the menu bar, click Tools > File Options > see tab (or display) > 'Show Hidden files... ". "is ticked > stand c:\windows\system32\dllcache and right-click on the sndvol32.exe file and copy > paste here c:\windows\system32 and replace the existing file if requested > re - start.

  The error should disappear.

  If, for some reason, it does not disappear and you have no sound, download, then reinstall your audio drivers on the PC/Laptop manufacturers website.

  See you soon,.

  Jerry

• IDT audio system tray application has encountered a problem

  This error message appears whenever I connect. I installed the audio drivers for my Dell computer and its working but I get this error message that I can do to get rid of

  Try these:

  http://www.gottaknownews.com/idterror.html

  http://Forum.NotebookReview.com/Dell-Inspiron-Dell-Studio/475317-req-step-step-guide-remove-IDT-high-definition-audio-Windows-7-a.html

  John

• Why systems can not find c:windows\system32\spool\drivers\w32x86\3\LXCEtime.dll?

  I just started getting this error. Don't know why all of a sudden he went...

  Hi brozojl,

  1. Did you the latest changes on the computer?
  2. Exactly when you receive the error message?
  3. Do you have any printer connected to the computer?

  The LXCEtime.dll is a file associated with the Lexmark printer.

  If you still receive the error message, I would say that you uninstall and reinstall the drivers for the printer, check to see if it helps.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  If you have a Lexmark printer connected to the computer it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• How can I fix "IDT audio system tray application...". ' error message?

  At startup the following message; "IDT Audio system tray application has encountered a problem and needs to close. We are sorry for the inconvenience. "How can I fix it?

  Hi irvingmargulies,
   
  As this tray application is linked to the audio driver, I suggest you to uninstall and reinstall the audio driver and see if the problem is resolved.
   
  Step 1: Follow these steps to uninstall the audio driver:

  a. right click on my computerand click Manage, and then click Device Manager.

  (b) in Device Manager, expand the category ' audio, video and game controllers ".

  c. in the list of drivers, choose your audio driver.

  d. right click on the audio driver and click on uninstall. Follow the instructions in the wizard.

  Step 2: Install the latest audio driver download from the manufacturer's website.

  More information on the driver update is available at:

  How to manage devices in Windows XP

• C:\Windows 32\spool\DRIVERS\W32x86\3\DLCJtime system error message

  Hello

  I am running windows xp professional and just recently, I received this error message when I log: error in C:\Windows System 32\spool\DRIVERS\W32X86\3\DLCJtime.dll\Missing entry: RunDLLEntry. It doesn't seem to affect anything but what should I do to get rid of this?

  Thanks for any help

  Hello, please not that this is a support forum for questions about the browser firefox web. We are not qualified to solve errors appearing when you start Windows - instead, please visit a support like this forum: http://answers.microsoft.com/en-us/wi.../871601b5-9297-478e-b974-44790a5bb06b

• run a dll as an app has encountered a problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  • Ideas: when I change the theme of my computer, I get the message that executes a dll as an app has encountered a problem.
  • You have problems with programs
  • Error messages
  1. Recent changes to your computer
  • What you have already tried to solve the problem

  Solution to fix this dll error

  1. Click Start | Control Panel | Administrative Tools | Services.
  2. Right-click the System Restore Service, and then click Properties.
  3. In the drop-down list Startup Type, select disabled.
  4. Click OK.
  5. Close the tool of administration and Services Windows.
  6. Do right click my computer, click Properties and click the System Restore tab. The System Restore tab should now appear correctly; However, the system restore service will be disabled.
  7. Turn the system restore and click on apply.

• Spooler Subsystem App has encountered a problem and needs to close

  We cannot print anything on my computer. the message is that the Print Spooler Subsystem App has encountered a problem and needs to close. How to get the print spooler to run and work my printer start?

  Hi Saeed,

  1. were you able to use the printer before without any problem?

  2. did you of recent changes on the system?

  3. What is the brand and model of the printer?

  Method 1:

  You can try to start the Fixit from the following link and check if it helps.

  Problems printing and printing errors

  Method 2:

  You can also read the following article and check if it helps.

  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

• Spooler SubSystem App has encountered a problem and needs to close. We are sorry for the inconvenience.

  Spooler SubSystem App has encountered a problem and needs to close.  We are sorry for the inconvenience.

  Hello

  1. When you get this error message?

  2. that you get this error message when printing?

  3. What is the brand and model of the printer?

  4. don't you make changes to the computer before the show?

  Please provide us with more information on this issue to help you best.

  If you get this error when printing, follow the steps from the link below.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/810894

• Spooler subsystem app has encountered a problem.

  HP Laserjet 1020 printer does not work.  Have used this printer for years.  Last print job has stopped the printing process and give the spooler subsystem app has encountered a problem error message.

  Used Mr. Fixit.   Have the print spooler service manually restarted and the RPC service. When I try to print, Spooler Subsystem App Error message appears and printer spooler stops,

  OS is XP Home Edition Service Pack 3.

  Cannot remove hardware HP Laserjet 1020 and reload HP Laserjet 1020 download did not fix problem.

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Use of the special procedure for printers Lexmark described below and follow in its first Article.  If still no joy, use the alternative method that is linked below.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.

  A special procedure for computers that have or had a Lexmark or Dell-badged Lexmark printer.

  Open a command prompt window (start > run > cmd > OK)

  Type the following in the black command prompt window and press enter

  dependent on the spooler of sc config = RPCSS
  output

  Note that there is no space before the =

  If you want to use a Lexmark or Dell-badged Lexmark printer after having done the above, you will need to reinstall it.

  Alternative to the method of his first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

  Use of SuperAntiSpyWare found two serious problems.  Could cross printer of pending work.  Printer works fine.  Thanks for your reply and advice.

  Best regards

• Printing error: "Spooler subsystem APP has encountered a problem and needs to close."

  Original title: cannot print to the network printer.__I have a net wifi Windows XP, SP 3 and an IBM laptop.

  Printers seem to be installed (XP has the printer connected via USB) but when I try to print from IBM I get an error as follows:

  "Subsystem spooler APP has encountered a problem and needs to close."

  The printer is a HP Deskjet D2660 and the LAN is configured correctly by using the wizard.

  I also discovered that the print spooler is never started.

  In addition, even when I start the spooler it remains not said during the next time I start up.

  Can anyone help? I've been banging my head for two weeks.

  Salvation;

  Thanks for responding.

  My IBM ThinkPad running XP - Pro

  My computer is a DELL and running XP-Home Edition

  Printer installed on DELL

  I have a WIRELESS LAN installed by the installation wizard. The net works fine except for the printer.

  Every time I start the spooler does not work. If I set the spooler of runing the choice is never registered. the next time I start up, the spooler does not work.

  I finally asked some experts to solve the problem of no access to the network printer. It took them more than 4 hours (for a cost) to make it work. Everything was going well until the next day. The problem is back. My thought is that the register should be updated so it will retain the corrtions.

  I downloaded the MATS_RUN.printing.exe utility. It corrects everything except this message on the Spooler subsystem.

  Any advice you can give me would be greatly appreciated.

• Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 80070003))

  I had to uninstall iTunes a few months ago and successfully re-installed, but part of my music was missing.   At one point, following the instructions on a thread on the forums Apple or Microsoft, I saved my music library on the desktop. Since then, I do not have a library of music on the desktop file.  In my looooooong hours trying to fix things, I do not know if I deleted it or what.

  Now, I get the message:

  "Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 8007003)) "whenever I have backup my computer.

  As I understand it, that does not affect really any other files, they rely on the spot (I think), but

  HOW CAN I GET RID OF THIS MESSAGE? or what is the cause?  Of course, I could use help in simple English, step by step, as I'm not very techno...

  Thank you!!!

  Try to be...

  SereneJulie

  Hi serene,

  Thanks for posting your query on the Microsoft Community.

  As indicated by the error, this problem appears, when these files/libraries that are saved automatically are not present on your computer. I suggest you to follow the steps below and check, if it can help solve the problem.

  • Create missing files that are listed in the error message.
  • Exclude files from the files to backup in the backup settings and then include these files in their original location. To exclude folders in other communities and to include these files in the original location, follow these steps:
    1. In Control Panel, open backup and restore.
    2. In the section back up , click change settings.
    3. In the dialog box Configure the backup , click Next.
    4. In the dialog box that you want to save , click Let me choose, and then click Next.
    5. Expand data files, library, expand additional locations, and then click to clear the check boxes folder AppData, Contactsand Research .
    6. Expand computers, expand the element of your system drive (for example, expand Local disk (c)), expand users, , and then click to select the checkboxes AppData, Contactsand Research if they exist.
    7. Click Next, and then click Save settings and exit.
    8. Backup and restore, click back up now to perform a new backup. The backup operation must complete without errors.

  If the problem persists, I suggest you follow the steps in the following article for troubleshooting backup problems.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors

  http://support.Microsoft.com/kb/973455/en-us

  Come back and let us know the State of the question, we will be happy to help you. We, at tender Microsoft to excellence.

• Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Dropbox\Camera file will be mailed. Error: (System does not find the specified path. (0 x 80070003))

  This is the error message I get after several days of decline in dropbox, my Norton, saying that he was sure loading! I have read and re read most of what people have written, and I have no idea! I'm not a person irritable and can someone put in easy terms what should I do to solve this problem! I read try it who try and read that nothing works. Does anyone know if something works and can it tell me please. Also if someone from Microsoft is reading this why not have you solved this problem?

  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Dropbox\Camera file will be mailed. Error: (System does not find the specified path. (0 x 80070003))

  Hello

  You did changes to the computer before the show?

  These problems occur because the folders or libraries that you are trying to back up or restore include a reparse point. Analytical points are similar to shortcuts Windows or Unix symbolic links. A point of analysis can be used to point to a file that is moved temporarily to a different drive.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
  http://support.Microsoft.com/kb/973455/en-us

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\.config file. Error: (the system cannot find the specified file. (0 x 80070002))

  I received this notification from my last backup. Some files were not saved.

  "Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\.config file. Error: (the system cannot find the specified file. (0 x 80070002))

  Should I worry. My previous backup was cancelled and not by me.

  OT: Warning backup

  Hello

  I suggest you try the steps from the following link:

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7
  http://support.Microsoft.com/kb/979281

• C:\windows\system32\spool\DRIVERS\x64\3\LXCGtime.dll error at startup of the system

  Original title: Run DLL error?

  Lately I get this message at the beginning upward.

  Error in C:\windows\system32\spool\DRIVERS\x64\3\LXCGtime.dll

  Missing entry:_RUNDLLEntry@16

  What this means and how can I fix this :D

  Thanks a bunch

  Hi Christalligator,

  Try these steps and check the result.
  Step 1: If you have connected the printer, we recommend you to reinstall the printer driver and check the result.

  Step 2: Restore the computer to an earlier time
  see How to restore Windows XP to a previous state .
  b. check if the problem persists.

  Visit our Microsoft answers feedback Forum and let us know what you think.