Error() MediaPlayer does not?

Similar Questions

• Windows service pack 1 downloads 99.9% but still comes up with error and does not?

  Windows service pack 1 downloads 99.9% but still comes up with error and does not?

  jktjw,

  Please post with the information requested here: what to post in the Windows Update forum
  Start with the troubleshooting steps and post returns with the requested info and arises from the troubleshooting.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 31, Microsoft ISATAP adapter 3 error code does not work. Help!

  I made a report of diagnosis, and this error came.  Unit does not properly.  Windows cannot load the required device (Code 31) drivers > ROOT\ * ISATAP\0004.  I would appreciate help to correct this problem.

  Thank you very much

  Hello

  ·                         http://support.Microsoft.com/kb/932520

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message

  Windows cannot load driver (Code 31)

  You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

• Error: "printer does not" (105-100003)

  Original title: PRINTING from MY COMPUTER

  I INSTALLED A NEW KODAK PRINTER. HAD THEWIFI TO WORK, BUT IT WON'T PRINT FROM MY COMPUTER.

  I GET THE ERROR CODE:

  Error: "printer does not" (105-100003)

  WHAT I will DO, I DONOT UNDERSTAND DIRECTIONS

  Help me

  Kodak solution - error: "printer does not" (105-100003):
  http://support.en.kodak.co.UK/app/answers/detail/A_ID/37708/selected/true

  Try the printer Troubleshooter

  1. open the printer Troubleshooter by clicking the Start button

  2. then click on Control Panel

  3. in the find what box, type troubleshooting

  4. then click on troubleshooting

  5. under hardware and sound, click "use a printer.

  Solve printer problems in Windows:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• error: 'QGeoPositionInfo' does not designate a type

  Based on https://developer.blackberry.com/cascades/documentation/device_platform/location/index.html, I tried to build the following codes:

  /*
   * GPSinfo.h
   *
   *  Created on: Sep 18, 2012
   *      Author: CNTEXIE
   */
  //  To start receiving position information,
  //  create a default QGeoPositionInfoSource object,
  //  connect its positionUpdated() signal to a slot
  //  on your receiving object, configure the
  //  DefaultGeoPositionSource instance
  //  (setPreferredPositioningMethods(),
  //  setUpdateInterval())
  //  and then invoke startUpdates(). The
  //  slot on your receiving object will be
  //  invoked as close to the desired update
  //  interval as possible, and will be passed
  //  the position information in a GeoPosition instance.
  #ifndef GPSINFO_H_
  #define GPSINFO_H_
  
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  
  using namespace bb::cascades;
  using namespace std;
  
  class GPSinfo: public QObject {
  Q_OBJECT
  public:
      GPSinfo();
      virtual ~GPSinfo();
  private Q_SLOTS:
      void positionUpdated(const QGeoPositionInfo &info);
  };
  
  #endif /* GPSINFO_H_ */
  

  /*
   * GPSinfo.cpp
   *
   *  Created on: Sep 18, 2012
   *      Author: CNTEXIE
   */
  
  #include "GPSinfo.h"
  using namespace bb::cascades;
  
  GPSinfo::GPSinfo(QObject *parent = 0) :
          QObject(parent) {
      QGeoPositionInfoSource *source =
              QGeoPositionInfoSource::createDefaultSource(this);
      if (source) {
          connect(source, SIGNAL(positionUpdated(QGeoPositionInfo)), this,
                  SLOT(positionUpdated(QGeoPositionInfo)));
          source->setPreferredPositioningMethods(
                  PositioningMethod::SatellitePositioningMethods);
          source->setUpdateInterval(1000);
          source->setProperty("backgroundMode", true);
          source->startUpdates();
      }
  }
  void GPSinfo::positionUpdated(const QGeoPositionInfo &info) {
      // Here's where you can do something with the device's position
      qDebug() << "Position updated:" << info;
  }
  
  GPSinfo::~GPSinfo() {
      // TODO Auto-generated destructor stub
  }
  

  The results are:

  .. /SRC/GPSinfo.h:43:29: error: 'QGeoPositionInfo' does not designate a type
  .. /SRC/GPSinfo.h:43:47: error: ISO C++ forbidden 'info' with no type declaration [-fpermissive]
  CC: C:/bbndk/host_10_0_6_1/win32/x86/usr/lib/gcc/i486-pc-nto-qnx8.0.0/4.6.3/cc1plus caught signal 1
  make [2]: leaving directory 'C:/Users/CNTEXIE/ndk-10.0.6-workspace/xGPSmaster/x86 '.
  make [2]: * [o-g/.obj/app.o] error 1
  make [1]: leaving directory 'C:/Users/CNTEXIE/ndk-10.0.6-workspace/xGPSmaster/x86 '.
  make [1]: * [debug] error 2
  make: * [Simulator-Debug] error 2

  Can help?

  Add this line...

  using the QtMobilitySubset namespace;

  and have this added to your .pro file
  LIBS +=-lQtLocationSubset

• Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 80070003))

  I had to uninstall iTunes a few months ago and successfully re-installed, but part of my music was missing.   At one point, following the instructions on a thread on the forums Apple or Microsoft, I saved my music library on the desktop. Since then, I do not have a library of music on the desktop file.  In my looooooong hours trying to fix things, I do not know if I deleted it or what.

  Now, I get the message:

  "Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 8007003)) "whenever I have backup my computer.

  As I understand it, that does not affect really any other files, they rely on the spot (I think), but

  HOW CAN I GET RID OF THIS MESSAGE? or what is the cause?  Of course, I could use help in simple English, step by step, as I'm not very techno...

  Thank you!!!

  Try to be...

  SereneJulie

  Hi serene,

  Thanks for posting your query on the Microsoft Community.

  As indicated by the error, this problem appears, when these files/libraries that are saved automatically are not present on your computer. I suggest you to follow the steps below and check, if it can help solve the problem.

  • Create missing files that are listed in the error message.
  • Exclude files from the files to backup in the backup settings and then include these files in their original location. To exclude folders in other communities and to include these files in the original location, follow these steps:
    1. In Control Panel, open backup and restore.
    2. In the section back up , click change settings.
    3. In the dialog box Configure the backup , click Next.
    4. In the dialog box that you want to save , click Let me choose, and then click Next.
    5. Expand data files, library, expand additional locations, and then click to clear the check boxes folder AppData, Contactsand Research .
    6. Expand computers, expand the element of your system drive (for example, expand Local disk (c)), expand users, , and then click to select the checkboxes AppData, Contactsand Research if they exist.
    7. Click Next, and then click Save settings and exit.
    8. Backup and restore, click back up now to perform a new backup. The backup operation must complete without errors.

  If the problem persists, I suggest you follow the steps in the following article for troubleshooting backup problems.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors

  http://support.Microsoft.com/kb/973455/en-us

  Come back and let us know the State of the question, we will be happy to help you. We, at tender Microsoft to excellence.

• Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Dropbox\Camera file will be mailed. Error: (System does not find the specified path. (0 x 80070003))

  This is the error message I get after several days of decline in dropbox, my Norton, saying that he was sure loading! I have read and re read most of what people have written, and I have no idea! I'm not a person irritable and can someone put in easy terms what should I do to solve this problem! I read try it who try and read that nothing works. Does anyone know if something works and can it tell me please. Also if someone from Microsoft is reading this why not have you solved this problem?

  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Dropbox\Camera file will be mailed. Error: (System does not find the specified path. (0 x 80070003))

  Hello

  You did changes to the computer before the show?

  These problems occur because the folders or libraries that you are trying to back up or restore include a reparse point. Analytical points are similar to shortcuts Windows or Unix symbolic links. A point of analysis can be used to point to a file that is moved temporarily to a different drive.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
  http://support.Microsoft.com/kb/973455/en-us

  I hope this helps. Let us know if you have other problems with Windows in the future.

• an error "file does not have a program associated with it for performing this action" when you click office and recent places.

  Original title:

  Win7 victory explrer click dsktop & mployment plces & get eror msg file is not a CDSA wth to prfrmin ths field prgrm. pls instl one prgrm so is alrdy instld Credit Union assc ltvds cntrl pnl prgrms

  I don't know how to fix. Help, please.    Win7 windows Explorer click

  Office & recent locations & grterror msg:
  This file does not have a program associated with it for performing this action. Please install a program or, if it is already installed. create an asssociationin the default programs control panel.
   
  Information given in the new thread:
  Error Msg When you try open office spaces & recent since the win Explorer

  when im in windows Explorer and click on the desktop or the recent places the link I get a msg of error and they will not open, but all others open. I posted pictures of error msg to skydrive yesterday.

  Hello

  Welcome to the Microsoft Community Forums.

  I see you've found an error "file does not have a program associated with it for performing this action" when you click office and recent places.

  1. Have you made changes on the computer before this problem?
  2. What is the full error message?

  I suggest you to report to us the screenshot of the Advanced window so that we can understand what exactly the situation.
  
  See:
  Use SkyDrive download collected files and post screen shot/image
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  The average while you can try the following steps and check if the error reappears.

  Method 1:

  Step 1:

  Start the computer in safe mode and check the number.

  Some options, including the mode safe mode, start Windows in a limited State, where only the essential is started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as a possible cause.

  Follow this link provided below to start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2:

  Put the computer to boot and check if the problem persists.

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 3 of the KB article provided above.

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  It will be useful.

  Back with the details so that we can help you further. We also indicate the result of the suggested steps.

• Cannot be getNodeWithProps. AppParameters treatment in the SOAP header error: AppParameters does not exist in the SOAP header.

  Hi all

  Cannot be getNodeWithProps. AppParameters treatment in the SOAP header error: AppParameters does not exist in the SOAP header.

  " < = xmlns:env env:Envelope ' http://schemas.xmlsoap.org/SOAP/envelope/ ' > < env:Header / > < env:Server env:Body > < env:Fault > < faultcode > < / faultcode > < faultstring > cannot getNodeWithProps.» AppParameters treatment in the SOAP header error: AppParameters does not exist in the SOAP header. "< / faultstring > < details > < DrmServiceException xmlns ="http://drm.webservices.epm.oracle"> < Message xmlns:ns2 ="http://drm.webservices.epm.oracle"xmlns =" "> cannot getNodeWithProps." AppParameters treatment in the SOAP header error: AppParameters does not exist in the SOAP header. "< / Message > < Code xmlns:ns2 ="http://drm.webservices.epm.oracle"xmlns =" "> 0 < / Code > < / DrmServiceException > < / details > < / env:Fault > < / env:Body > < / env:Envelope > "

  clues?

  Thank you

  Mady

  Hi Mady,

  Have you run a test of the DRM of this URL service section? Part of the SOAP message that must be sent to the web service DRM when calling the AppParameters is in the header of the SOAP message. This is the example that gives the URL:

  
  http://DRM.WebServices.EPM.Oracle">
  http://DRM.WebServices.EPM.Oracle ">http://localhost:5240 / Oracle/Drm/APIAdapter "
  http://DRM.WebServices.EPM.Oracle "> ProductVersion = 11.1.2 CultureName = US, TimeZoneOffset =-360"
  

  The error is just saying that the section of AppParamters doesn't seem to be there in the SOAP message that was received. How you call the web service DRM method that returns this error? It seems just that, however, it is called the AppParameters is missing in the SOAP message is sent to.

  Do you need some kind of common authentication method setting upward for Weblogic and Shared Services, but not necessarily OID. I mentioned a possibility without using an external LDAP directory here on a case where you set up a development environment Re: configuration of the DRM web service API

  Concerning

  Craig

• Error message does not appear

  A login screen I have a Validation. This Validation checks too many failed connection attempts. It works in part because it prevents the user to login when there has been too many attempts to register. But I clear the error message does not appear.

  Display message error location choices are in line with field and in the Notification, in line with the field, Inline in the Notification and error Page. None makes no difference, the error message that I've specified does not appear.

  What can you tell me? Thank you

  Request Express 4.0.2.00.07

  Is what I saw, people by adding an element of the display on the login page to display these error messages...

  Thank you

  Tony Miller
  Los Alamos, NM

• Make a right click on the folder responds slowly and sometimes get an error "windows does not.

  original title: pc maintenance

  Make a right click on the folder responds slowly and sometimes get an error "windows does not.

  Make a right click on the folder responds slowly and sometimes get an error "windows does not.

  This could be due to so many things. Malware, applications in resources, solutions anti-virus, hard drives damaged, damaged file system, processor ram capacity limitation...

  can't tell what your problem exactly, you can use the reliability monitor, event viewer to discover additional problems...

  What does it mean when a program is not responding? http://Windows.Microsoft.com/en-us/Windows-Vista/what-does-it-mean-when-a-program-is-not-responding

• The controller throws an OAException, but the error message does not appear

  I made a controller to add validation business customized to a specific region of a page of Iprocurement. The controller throws an exception, but the error message does not appear on the page.

  Why when the exception is thrown, the system do not stop the processing of the page and displays the error message?

  I do not know the controller is reached because the page through JDeveloper debugging.

  -PageLayout

  -stackLayout

  -subTabLayout <-my controller is located in this region

  SerializableAttribute public class AccountsDistsValidationCO extends

  {oracle.apps.fnd.framework.webui.OAControllerImpl}

  ' Public Sub processFormRequest (pageContext OAPageContext, OAWebBean webBean)

  {

  super.processFormRequest (pageContext, webBean);

  throw new OAException ("something just happned");

  }

  }

  I should to use the following to solve my problem

  pageContext.putDialogMessage (message);

  pageContext.forwardImmediatelyToCurrentPage (null, true, null);

  Reference:

  OAException.ERROR is not throwing the error

• Hello. I bought the cc (2014), updated to the cc (2015). I continued to pay. but I can't update. It gives an error that does not license! What should I do? urgent, Hello. I bought the cc (2014), updated to the cc (2015). I continued to pay. BU

  Hello. I bought the cc (2014), updated to the cc (2015). I continued to pay. but I can't update. It gives an error that does not license! What should I do? urgent.

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Certification of storage - errors "Iometer does not exist.

  During the test of audit Workbench, I get error "Iometer does not exist on < name of vm >" for all virtual machines Windows 8.

  I can open a console for each virtual machine and run Iometer interactively. The window of the Dynamo is open, I can choose a disc and the scenario, can run and view numbers of IO.

  I checked that these folders exist on each virtual machine:

  
  

  C:\Iometer\Configs

  Z:\Iometer\Results

  What may be the cause of these errors?

  TIA

  I found the problem - in the Questionnaire, I put the wrong path to the executable Iometer.

  Must be:

  C:\\Iometer\\

  Yes, the double backslashes - very important.

  Thank you for your replies, I appreciate.

• After effects error: layer does not have a source.

  Hi all

  I add a text layer and then add my custom fill effect. Then I call AdvItemSuite1()-> PF_ForceRerender (in_data, & (params [0]-> u.ld)) of the CEAP for all layers. But only for the text layer, AE will appear a dialog box displays the following error message:

  After effects error: layer does not have a source.

  (26::335)

  Why is this happening? What other call can I use to render all the layers?

  Thank you and best regards,

  Dheeraj

  text layers is really a source (as opposed to solids which do).

  any source operation you will do an a text layer will give an error.

  It goes the same for shape layers.