Error message 1802 on the installation of the Wireless Broadcom Minipci card
Tags: ThinkPad Notebooks
Similar Questions
-
Original title: Carpenter
I can print but can't scan. Tried to uninstall then install the 3 in 1 copy fax printing hp 4500 but says cannot find the wireless device.
Hi Ryan,
You can check the link to HP support to run the HP Diagnostic Utility to check the issue of scanning:
Find and fix common problems using tools of diagnosis HP printer=
You can also check out the link to HP support and try to update the latest drivers/software for your printer:
You can also read the articles and check if it helps:
-
I get a dll error message that says: "the application or DLL C:\WINDOWS\system32\kizinone.dll is not a valid Windows image. Please check this against your installation diskette.
I went to the system registry to find the file it refers and is not a he. I ran a norton registry cleanup and a virus scan. I did find something online that made reference to this dll file. The message appears at any time that I start a new program. How to fix this, or find the virus that is the cause.
A Google search for "[insert the name of the file]" grown up nothing. When you get no hits for a filename on Google, chances are high that it is a malicious program file. You did not when you get the message. If it's only at startup, either you have uninstalled the malware program or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup. If you get the message during regular time on the computer and not not only at startup, your computer is still infected.
Norton will do the job of cleaning and registry cleaners are garbage who at best will not do anything and the worst risk damage to your Windows installation.
First of all, make sure that the computer is really free of virus/malware through these systematically - General malware removal steps http://www.elephantboycomputers.com/page2.html#Removing_Malware . Then, if the computer is really clean and you still receive the message, manage your Startup to remove the reference to the malware:
Start > run > msconfig [Enter]
This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".
How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560
The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx
MS - MVP - Elephant Boy computers - don't panic! -
Original title: Device Manager empty
I have Windows XP Service Pack 3 installed in a Bootcamp partition on my Intel iMac. I can detect and install new hardware such as USB keys. However, the Device Manager window is blank - how can I get the window to display the devices connected to the computer? I am also unable to install Parallels tools when I use Bootcamp as a virtual machine. The error message "cannot create the 'root-enumerated device' necessary to install Parallels Paravirualization driver.
Hey Harcjk,
For your first question, go through this article.
None of the items appear in the device list manager when you open
http://support.Microsoft.com/kb/311504For the second question, here are some suggestions:
Method 1: Uninstall & install Parallels tools
NOTE: we highly recommend you make a backup of the virtual machine before you continue.
a. start your virtual machine and cancel the installation of Parallels Tools Wizard.
b. Click Start--> Panel--> Add / Remove programs and remove the Parallels tools in the list of applications.
c. restart Windows.
d. install the Parallels tools by clicking on the Virtual Machine--> install the Parallels Tools.
Method 2: Uninstall antivirus software
If the problem persists, try the following:
Temporarily uninstall all the antivirus software to the virtual machine and repeat steps of the "Uninstall & install Parallels Tools" section above.
Note: Don't forget to install the back antivirus software, once the problem is resolved.
Method 3: Uninstall, clean & install Parallels tools
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
How to back up and restore the registry in Windows XP
http://support.Microsoft.com/kb/322756
a. If the problem persists, try the following:
b. start Windows.
c. go to "Start" > "Control Panel" > "Add/Remove Programs" and uninstall theParallels Tools if it is present.
d. go to 'my computer' > 'C' drive > "Program Files" > "Parallels" folder and delete the "Parallels Tools" folder, if present.
e. click the Windows 'Start' menu-> 'run' and type 'regedit'. Click OK.
f. in the registry editor, go to "My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Parallels" and delete the heading "Parallels Tools" and go to "My Computer\HKEY_CURRENT_USER\SOFTWARE\Parallels" and remove the 'Tools' section.
g. restart Windows.
h. now install Parallels tools in the 'VM' menu on the Parallels Desktop menu bar, while Windows is running.
I hope this helps.
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
help and support does not work
When I select Help and support icon, I get an error message indicating that the feature could not start.
I use a Vista 32 bits on a HP computer operating system model number m8300f.
In addition, I bought a copy of Win 7, but who could not load freezing during installation.
Hello
Try to run the command in the elevated command prompt, follow the steps below, it could help us solve the problem.
1. open the start menu, click programs principally made, select accessories.
2. right click on command prompt, and then click "run as administrator ".
3. type the following commands in the DOS prompt window and press ENTER at the end
of each line:REGSVR32 MSXML3. DLL/U
REGSVR32 MSXML3. DLL
REGSVR32 MSXML6. DLL/U
REGSVR32 MSXML6. DLL(At the elevated command prompt command should not give us any error).
Restart the computer and try to access help and Support.
For the problem of installation of windows 7.
We would like to get more information about you to help solve your problem. You better, please answer the following questions.
1. How did you start the installation process?
2. you perform a new installation or an upgrade?
3. what type of drive you are using for installation?
4. at what stage of the installation has it stopped?
5. have you received an error message?
First of all, I would say that you disconnect external devices connected to the computer except the keyboard and mouse.
If you have performed an upgrade suggests to restart the computer and you will be prompted for a roll back option.
Once you're on the office suggests to run Upgrade Advisor and check what needs to be done before you start the upgrade.
Before you begin the upgrade process to ensure that your computer meets the condition of equipment to install Windows 7 and check on the website of manufacturer computer if the computer is good to run windows 7 or not.
Installing and reinstalling Windows
http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows
-
To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.
Hello m.velentino,
Not sure if you are still having the error message isn't valid win32.applicaiton.
Get the error: not a valid 32-bit application can have several origins:
I have listed some of them below.The file is corrupted, bad or missing.
-If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
-If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.File is not designed for your version of Windows:
-If you try to run a program that is not designed for your version of Windows, you can get this error.
-Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
-If the program is an MS-DOS program more former start program or Windows, you can get this error.
-If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.File is a virus, worm or other malicious program file.
- This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
-If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
Hardware incompatibility.
-If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
-Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)Let us know if these suggestions help you.
Marilyn
-
I get an error message "signing of the download_package.exe is damaged or invalid" what should I do?
Download a valid file.
Available downloadable Setup files:
- Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
- Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
- Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
- Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
- Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
- Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
I tried the license of my trial version of photoshop elements, but the download is for windows and I use a mac. Secondly, I get an error message saying that the serial numbers provided by Adobe in the received email are not correct.
Regarding the download, the correct trial version going, you should be able to manage on the link below. If you have made a purchase and bought a Windows license so it is not valid for a Mac installation. You will need to contact the Support from Adobe when they go bacvk vacation to see about getting the correct license.
You can download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
Photoshop/Premiere Elements 14: http://prodesigntools.com/photoshop-elements-14-direct-download-links-premiere.html
To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If it fails to connect, try to use another browser.Get help from cat with orders, refunds and exchanges (non - CC)
http://helpx.Adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 ) -
I am trying to download items 9 to a new computer and get an error message that says: "the archive file Elements 9 is missing" how to fix this?
as well, you need the 7z and the exe. put them both in the same directory and double-click on the exe file.
Available downloadable Setup files:
- Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC | XI, X | 9,8 | 9 standard
- First Elements: 13 | 12 | 11, 10 | 9, 8, 7
- Photoshop Elements: 10, 11, 12, 13. 9,8,7
- Lightroom: 6| 5.7.1| 5 | 4 | 3 | 2.7 (win),2.7 (mac)
- Captivate: 8 | 7 | 6 | 5
- Contribute: CS5 | CS4, CS3
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
window using the Lightroom 3 link to see these "important Instructions".
-
On my DesignJet 5500, I rswitched the ink tubes, printheads and printhead cleaners dyeing anti-UV, 81 to 83.
I got an error message saying that the black print head needed to be replaced so I bought another head black printing and after that, I was able to print a test page that shows all the colors (image quality page?).
Magenta not give not any code of error before, but now I get an error message saying that the printhead magenta must be replaced, even if magenta print well on the printed test page.
Hello
The printer give you a warning when the health of the print head is low, but it will continue to print.
If the problem has been solved after all print head replacement can be that a print head cause others to fail
Or, just a few bad print heads
-
Libretto U100 Bluetooth error message indicates - getting the list of files fail
Hello
I try to connect my Libretto U100 Bluetooth to a new Sony Ericsson mobile software Bluetooth for exchanging information.
I can connect and see the files on the mobile phone, but when I click on the folders, there is an error message indicating "getting the list of files doesn't have."
New drivers must or is there something else I need to set up at all?
Previously, I was able to connect to any other mobile phone with no problems.
Thank you in advance for help you.
Hello
I m sure that it s is not a Bluetooth problem or a cell phone if it s possible to connect Sony Ericsson and other mobile phones. Unfortunately, I'm not very familiar with this laptop but I found this site with FAQ on your mobile phone.
http://www.Ericsson.com/Contact/FAQ.shtml
http://www.Esato.com/Help/FAQ.phpIn addition, you should check the manual of the phone. I sure you will find a description of m
Good luck
Good bye
-
Receive an error message when updating the iPad to 9.2. What should do?
Receive an error message when updating the iPad to 9.2. What should do?
What is the wording accurate and complete error message? What troubleshooting
did you?
-
I try to sync a new phone 6 s with tunes11.4 and receive an error message saying that the phone cannot be used because it requires a newer version of itunes. I've updated the phone and itunes. can anyone help?
Sorry, iphone and itunes.
-
error message indicates that the new 450 turbo label printer does not support the type of paper 119
error message indicates that the new 450 turbo label printer does not support the type of paper 119
Contact the society of the printer. There is nothing that Microsoft or Windows, can do to force the printer to accept a type of paper, though it says it will not accept it.
-
Outlook Express 6
Hello
Recently, if I send a big PDF file via outlook, after attempting to send the files, I get an error message saying that the mail has not been sent. The files remain in the Outbox, but when I check with the recipient, they confirm that they have received the mail! This has only recently begun to happen. Any suggestions? Thank youCheck: File | Work offline and in: reviews | Layout: uncheck the preview pane. Open the Outbox and delete the message.If that does not create a new box of sent, and sent items.Follow these steps for the Outbox and sent items after you move the messages you want to save to a local folder that you create.Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.In Windows XP, the files of user OE (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.With OE closed, find the Outbox.dbx and Sent Items.dbx file and remove them. New files will be created automatically when you open OE.
Maybe you are looking for
-
For years, my desktop icons have acted as if they have so many 'slots' to enter in on the office. But this has never been a problem. They were easier to align because they were right next to each other, or a 'slot' above/below/apart. Now, for some re
-
I keep getting windows pop up on my screen to update, but it still says that it is not compatible with Kapersky, I just update. Makes me nervous. In addition, belongs to Adobe of Mozilla? I can't seem to update that. However, it seems like if I can't
-
Microsoft Office 2003 installation issue
I tried to upgrade the old microsoft office to a newer Microsoft Office 2003 but I have expirience a mistake on him and he says of "ERROR 1913.Set to the top can not day file C:\Windows\win.ini.» Check that the file exists and that you have permissio
-
How to find my webcam on my Pavilion 23-q116
I recently bought a 23-q116 all-in-one Pavilion and cannot find any reference to one webcam that is other than the list of features on the box "integrated before face to the webcam with microphone". Where should I look for this?
-
NB 100 - switch to 1 GB possible?
Its clearly understood that netbooks can't have a ram of 1 GB under the laws of windows. However my model the 512 MB Ram linux is clearly under the present. is it possible at this level to 1 GB