error message Airport base station agent quit unexpectedly

Similar Questions

• I just upgraded to a pace 5268AC router and can connect is more to my Airport base station. It does not appear in Airport utility. Any suggestions?

  I just upgraded to a pace 5268AC router and can connect is more to my Airport base station. The base station does not appear in Airport utility. Any suggestions?

  Whenever you change the modem or modem/router to which the airport links... or... change your Internet connection process, the airport must be reset to the default settings and then set it up again to work with the new device.

  Your message did not mention if you did that, but if not... to perform a Hard Reset on the router of the airport would be the first thing to do, to follow in setting up the airport once again, just as you would if the airport was new and connection to your modem/router for the first time.

• update so on different WiFi router and now my Airport base station has a yellow light flashing - how to reset the base station

  Light Flsahing Amber on my Airport base station

  A persistent, flashing amber light indicates that one of the conditions is possible more may require your attention:

  • The base station has not yet been configured, because it's new or reset switch has been set.
  • You have chosen a security configuration that is not recommended.
  • Among several other conditions, such as a disconnected Ethernet cable or invalid IP address has been detected.

  (Ref: AirPort base stations: status of base station on airport (LED))

  To find out why your base station status led is orange flashing:

  • Open AirPort Utility
  • Click on the AirPort base station
  • Look for the Status parameter in the small window that appears
  • Click on the little orange dot here and another window will open to explain what might be the 'question '.

• When you try to download adobe acrobat, I get the error message indicating that he met a unexpected faliure

  When you try to download adobe acrobat, I get the error message indicating that he met an unexpected failure. Any suggestions?

  Hello

  Please try to download the software from the URL here download Acrobat products | Standard, Pro | DC, XI, X and let us know how it goes.

  ^ Ani

• Airport base station utility is not compatible whit

  "I bought an Airport Express 2005 model, when I try to connect to my Macbook pro, I get the message: this version of Airport utility is not compatible whit this base station.

  Any suggestion on what to do? Thank you.

  Apple no longer supports the old base station 802.11 g with new versions of OS X.

  Basically, you have only three choices:

  1. Use a Mac OS X Snow Leopard or earlier.
  2. Use a PC with Windows XP or 7. Although you will also find those running win 8 or 10 to work as well.
  3. Replace your Express with a newer 802.11n model.

• Error message from DPM 2010 and an unexpected error has occurred on the DPM server during a VSS operation.

  Hello

  I have a server running on a Windows 2008 R2 server DPM 2010

  Currently save a mix of virtual and physical machines, these are a mix of Windows Server 2003 SP2, 2008 & 2008 R2.

  The DPM was previously a bit crumbly, but it was supposed to be caused by lack of disk space. A QNAP server was introduced and configured as an iSCSI target. After the initial problems, it works now.

  EXCEPT

  Three volumes of backup not. They were part of the protection group but they had no point of recovery at all. I deleted their protection groups and have tried to add them to their original groups. These 3 volumes all fail with the following error message:

  An unexpected error occurred on the DPM server machine during a VSS operation.

  Error details: VssError:Shadow copy the specified volume only is not supported. (0x8004230C)

  3 volumes are on 3 different servers.

  All 3 servers are running Windows 2003 SP2

  3 servers have other volumes that are save successfully and consistantly

  There are an additional 3 servers Windows 2003 SP2 that all volumes save successfully and consistantly.

  I can run shadow copies on these three volumes on servers

  All servers run the latest DPM Agents

  3 volumes have unused production capacities, Gig instead of Mb

  The pool of storage on the DPM server has two disks in the storage pool, the local disk has 10 TB of capacity and 45% free, the iSCSI target has capacity to 55 and 78% free.

  There are no. VSS errors in system or application logs (or I've noticed in just about any other log file) on the DPM server or the customer Server

  I have tried to add in the protection group, 3 volumes at once, one at a time or a small directory, or create a new protection group and still get the same errors.

  I ran the Windows updates on these servers

  So far all I can say the disk permissions look OK and match those of the other volumes of work.

  I know that having two drives in the storage pool is not ideal, and it will be changed but not up to what I have fixed the problems on the three volumes.

  Hello

  I suggest you to report this issue in support for Windows Server 2008 R2: http://technet.microsoft.com/en-us/windowsserver/bb512923

  Thank you.

• Update at the same time several Airport base stations?

  Hello

  7.6.7 airport firmware has been released. We have 20 + Airport Express base stations in my school, and now I have to select them one by one and update the firmware. I can still do something in Airport utility while a base station is updated. This takes forever. Is it possible to update the firmware on both base stations?

  Thank you!

  Is it possible to update the firmware on both base stations?

  Sorry, but no.

• Error message: Adobe Presenter has encountered an unexpected error when you work with that much...

  Suddenly, today, three of my colleagues around the United States with Presenter 7 licenses can no longer save PowerPoint files or work with presenter.  Each of us has created courses successfully last week.

  We all get the message 'unexpected error', tells us to "try to save your work in a new file, and then restart PowerPoint.»  If the problem persists, consult the help section... "We get the message even if we do is type a word on a slide, and try to save the file.

  We cannot open the host help menu... the same error message.

  So now, we can not save a PowerPoint file.  We cannot save a file in presenter.  We cannot save or import audio data to the presenter.  No matter what you click on the toolbar of the presenter, we get the same error message.  Nothing works.

  Help!

  The updater you will get only 7.0.6. 7.0.7 was a major update, which took the presenter of an application from AS2 to AS3 application. I recommend to perform the process of update for 7.0.7, because it is 'necessary' to use with Connect 8.1 and newer. Published presentations wit 7.0.6 and older should work well.

  The 7.0.7 update process can be found here: http://helpx.adobe.com/presenter.html

  There is a link to download the updates of product, where you can get the installer for 7.0.7.

  There are also instructions for upgrading to 7.0.7 as a stand-alone application or as part of a Suite.

• Error messages in the Log Agent Manager

  We get below the error message at the start of the SGF in the log agent Manager

  Sounds to me like the adapter on the fms is not executed in hardware.

  When you go to the Administration > adapters (as agents) do you see an fglam adapter in an active state?

  If it is not active, you can try to turn it on?

  

  Golan

• Error message: Spooler subsystem app has quit working

  I have been using Windows Vista Home Basic version for several months. After turning on my computer for several minutes, two weeks ago I received an error message "Spooler subsystem app stopped working. Then when I clicked on the solution put on internet, I was recommended to close this error message. But then another message appeared "Data Execution Prevention has closed.

  How can I solve this problem? I have not install new software at all. How is it that I get these 2 posts? Please notify.

  My email is * address email is removed from the privacy *.

  David Taylor

  Hello

  Your printer drivers have become probably either damaged or defective. Remove them and install a new download of the manufacturer of the printer. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Unable to connect to the Internet, the error message "Cisco AnyConnect VPN agent service is not responding. Please restart this application after a minute"

  Original title: unable to connect to the internet

  Whenever I connect to my computer and get it on my desk, it goes on to say that Cisco AnyConnect VPN Service not available. How can I fix? I am not connected to the internet and I can't connect to the internet as well. He said also Cisco AnyConnect VPN service agent is not an answer. Please restart this application after a minute. Also, I can't use my firewall for some reason, if I try to allow its loading and the greenbar's going that far - then stops and says that there is an error. I forgot where I tried to activate.

  Oh thanks for the help but I fix it myself. I just did a system restore to a month before

• Error message on the download of update of firmware for airport

  Get an error message when you try to download the update of firmware for the airport. Have disabled the Wi - Fi for all devices; powering down of the airport; MacBook connected to the router via a cable; access to Internet but the download update still gives an error. Any ideas on haw to get the update, or what is the problem? Thank you.

  The error message say, exactly? What version of Mac OS X you are running on this machine?

  For updates of the firmware to work, you must be connected to your device from the airport and connected to the Internet at the same time. If you have a situation where you have to disconnect from the Internet to connect to your airport device, it does not work, at least not for the first time, you have to download a firmware version for the same model of AirPort base station.

• How can I change the base station Airport of NAT mode?

  I'm trying to set up an Airport base station and stuck because I have the following message is displayed, but no idea how do what he asks...

  Status is showing as Double NAT and then asking me to move on to the base station in bridge DHCP/NAT mode.

  But where do I do this?

  Thank you

  It can be difficult to get the router to bridge sometimes... but if all goes well... Click on the airport icon in airport utility and then click on edit.

  

  Go to the network tab and change DHCP and NAT to bridge.

  

  Click Update at the bottom of the page... Then, everything should be good.

  If you are having problems follow these steps.

  Reset factory airport and then do a manual installation. I recommend that you connect with ethernet which is much more reliable, but your MBPr is not the most important network port that exists... Although there is a bolt of lightning at low cost for the ethernet card.

• 1102w does not connect correctly to the Airport Extreme Base station (Time Capsule) (wireless)

  & #3; I've been troubleshooting all day on this problem for my parents, trying to set up printing wireless for them on their new HP 1102W. I am trying to connect the printer wireless to their Airport Time Capsule base station. Using the WPS configuration, the printer is recognized by the base station, but I'm still not able to print wirelessly or via airprint. Enter the web configuration via USB, I see that the printer is grateful the network, but it doesn't have an IP address (it is set to auto/DHCP). Later I tried to connect to a shared of my iphone, wifi connection and everything worked perfectly, so the problem is that somehow the printer will not connect properly to the Airport base station. I tried several resets and restarts the printer and the base station, and the printer and the base of the station has new firmware. I also tried to change the security on the terminal of the default wpa2 personal wireless with wpa/wpa2 personal.

  I'd appreciate comments on this issue because I am quite frustrated now :-)

  Using the tool of the airport, I logged on to the base station and changed the wifi settings, while 2.4 and 5 ghz networks have different names instead of identical names standard. That did the trick, eventually I just configured the printer using wps in a few minutes.
  
  Thanks for your help.

• problem w / Airport Extreme base station and modem Netgear broadband

  I just changed to ATT Uverse to Time Warner - internet only.  With Uverse, I was using my Airport Extreme base station to create a wireless network, and it has worked well in this capacity.  When you switch to TWC, the tech got the modem (TWC allows you to buy your own modem, so I bought a Netgear CM600 a recommended model) enabled and works very well, but could not get the Airport base station to talk about her (yellow light blink on the base station).  So, he opted for a TWC wireless modem/router.  Interestingly, I found that I could plug the Airport base station in the TWC modem (without any reconfiguration, just plugged into the WAN port base station to the modem ethernet port, as I had had with Uverse equipment) and voila!  It worked immediately.

  So, I called TWC to retry my Netgear modem.  I have the base station power off, plugged on the ethenet port Netgear, put back under tension and just got the blinking light.  I know that the modem does not work, because my iMac's network to the internet through the base station, for the Netgear, and go outside and I can fine surf in this way.  So it is something in the wireless configuration that must be different between the TWC modem and the Netgear modem.

  Obviously, I'm not an expert at this, basic troubleshooting tips would be appreciated.  The base station functions as a router (I can connect through a port ethernet through it), it is simply not generate a WiFi network for me...

  Thanks for the tips

  Steve

  Carlsbad, CA

  So, he opted for a TWC wireless modem/router.  Interestingly, I found that I could plug the Airport base station in the TWC modem (without any reconfiguration, just plugged into the WAN port base station to the modem ethernet port, as I had had with Uverse equipment) and voila!  It worked immediately.

  If your AirPort Extreme has been in its original configuration, it would act as a wireless Internet router. If you connect another router upstream to the extreme, there is work, but you'll have a condition known as: Double NAT. This isn't necessarily bad, but should be avoided if possible. To do this is simply to reconfigure the downstream router (in this case, the extreme) under a bridge. This disable its functions of routing and remove the error condition.

  However, if your extreme base station has been reconfigured as a bridge, if connect you directly to a simple modem, like the Netgear CM600, then this configuration will not work because no device will provide the necessary routing functions.

  It's always a good idea to perform a full power recycle your network hardware during change of equipment. Maybe that's the only thing your missed when you design your own? If you haven't done so already, please give it a try with the CM600 & Extreme combo. After return your results.