Error message - installation Script engine is missing from this machine

Similar Questions

• Microsoft Fix It does not "Windows Script Host gave me the error message: cannot find engine\ 'VBScript' Script script.

  installed Microsoft Fix It.  When I try to launch it I get the message that there is an error during the MicroFix troubleshooting it won't work.  I can only use the online version.

  I had a problem installing a program and products purchased for the program.  Windows Script Host gave me the error message: cannot find engine\ script 'VBScript' Script 'C:\Users\debra\AppData\roaming\MyEQBoutique\Boutique Registry Entries.vbs.  I uninstalled the program.  I ran the SCF.  Ran the clean boot, and then set back to normal. I restored to the previous day.  I ran the scan online to remove malicious whatevers, also, I went and changed all my default settings.  Windows tells me that it is up-to-date.  I have Windows Vista Home Premium, I use Microsoft defender and Microsoft Security Essentials.  What is going on? What can I do else?

  Hello

  (1) have you made changes before the start of this issue?

  (2) have what program you tried to install?

  (3) you are able to install any other software on your computer?

  (4) what fix - it you try to run?

  This occurs if the filevbscript.dll runtime script is not properly registered in the system.

  Try the steps below and check if you are able to run the Microsoft fixit.

  a. click the Start button, type cmd. In the result of the research with the right button on cmd and select run as administrator.

  b. type cd %windir%\system 32 (Note: there is a space between the system and 32) and press ENTER.

  c. type regsvr32 vbscript.dll in the command prompt, and then press ENTER.

  d. type regsvr32 jscript.dll in command prompt, and then press ENTER.

  If the registration was successful, you should now see the following message is displayed:

  DllRegisterServer in vbscript.dll successful.

  e. now, try to run the Microsoft fixit.

  See also:

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  After the question in the following forum if the problem with fix - it persists.

  http://social.Microsoft.com/forums/is/fixitcenter/threads

  Let us know if that helps.

• I get an error message when I want to print from my laptop on my Lexmart printer wireless. It is said "problems connecting to the printer.

  original title: devmgmt msc

  I get an error message when I want to print from my laptop on my Lexmart printer wireless. It says "connection to the printer problems" sometimes he just complained and then prints, sometimes it won't print at all. I hate the thing!

  Hello

  I suggest you to see link below and check if it helps.

  http://www.Lexmark.fr/publications/pdfs/810/winug/Eng/UGnetwk.html

  I suggest also you see the steps from the article below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

• The base filtering engine is missing from my computer. How then I reinstalled it?

  The base filtering engine is missing from my computer.  How then I reinstalled it?

  I agree - probably a good idea to re - install once in awhile to clean things up. format/install only took 20 minutes on a Win 7 laptop of Dell, and the image of the plant contained all required device drivers, so in an hour, I was in business (just had to reinstall light software).

  Bottom line, it was my fault (notwithstanding the clever but harmful individual who orchestrated injection of Trojan in my system of a Web site);  I was operating on bare bones viral protection. Now have Norton/Malaware and so far, no problem with Win 7 Home Security 2012 the virus.

  I can also threw more things by running 3rd party registry fixes - depends on the base engine (BFE) filtering service probably on one or more of the registry settings - if the fixes I ran were not smart enough to understand that while some real digging to find out what registry settings still an add-on / difficulty to ensure that (1) the BFE appears in the list of services and (2) it is the permissions allow local administrator to restart the service.

  A.

• I can't download the new iTunes update, the error message say "is there a problem with this Windows Installer package."

  I can't download the new itunes update.  Error message says "there is a problem with this Windows Installer package.  A program required for this install to complete could not be run.  Contact your supplier of staff or the package of support ".
  I was running itunes perfectly well before trying to download this update.  ITunes is not yet available.
  Original title: update iTunes Application program compatibility

  Thanks for your help.  Unfortunately no idea worked.  Windows Installer 4.5 is not good for Windows 7.  However, I was able to restore my computer to an earlier date and the previous itunes was there.  It still would not allow me to access without security clearance, but I finally understood how to afford access - I am the administrator and the only user - go figure!
  Thanks again.

• Windows media player, when I try to download a cd, it burns completely to 99% and then stops with an error message indicating that it may miss a codec.

  When I try to download a cd, it burns all the way to 99% and then stops with an error message indicating that it may miss a codec. How could I be missing this and how I get it back or find exactly what it is that I'm missing? Help!

  Hi jeanamae,

  the error message shows which codec is missing?

  Is there a 'additional information' icon or the link?

  Try to reduce the speed of the burn and see if you get the same question.

  B Eddie

• Photoshop CS5, I get the message: some application components are missing from the Application directory, please reinstall the application.

  Trying to open Photoshop CS5 I get the following Message: among application components are missing from the Application directory, please reinstall the application.

  Can I get these downloaded components that my optical drive is broken.

  Download the CS5 products

• OATS: Error Message 'Unable to get a connection from the browser' on the record

  Hello
  
  I am involved in the control of the operation for application Siebel 8.1, with the OATS 9.3 tool.
  
  Trying to save, an Error Message * "unable to get a connection from the browser. You want to continue to wait for the browser load? "* appears, even if InstallBrowserHelpers has been installed.
  I tried to uninstall the 'BrowserHelpers' and re - install but the question remains.
  
  your response on this will be appreciated.
  
  Thank you!

  Try to uninstall everything that touches on OATS to your PC then re - install. Uninstall steps are in this forum. You can search for it. Work around the error can take a long time.

  Concerning
  CP

• Message "Installer has sufficient privileges to modify this file" when you try to uninstall a program

  When I try to uninstall unwanted program I get a message "Installer has sufficient privileges to modify this file" I am the only administrator & user of this computer.  I use Vista M.S..

  [Moved from comments]

  Hi John,.

  1. Since when are you facing the issue?

  2. you have any security program installed on the computer?

  3 did you a recent software or changes to the material on the computer?

  Method 1:

  I would say allowing you to run the FIXIT from the link provided and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:

  I also suggest to try to run the System File Checker scan on the computer. The scan will replace all the Windows files corrupted with new ones.

  Click on the link mentioned below for further guidance on the scanning of the file system Checker

  http://support.Microsoft.com/kb/929833

  Method 3:

  I also suggest you to run a full scan using the Microsoft Safety Scanner and check for infections.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  See also:

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Hope this helps and let us know if you need more assistance. We will be happy to help.

• I know little or nothing of WININET, but it seems that this may be the problem based on the error messages 9 out of 10 say involve this part of the Microsoft software.

  I'm not tech guru when it comes to computers.  I don't really know enough to get into trouble.  Here's my problem.

  For the last six weeks or so, I keep getting dropped offline.  AOL is my browser and I get the message "your AOL software has encountered a problem" or words to that effect.  Tech AOL were useless to solve the problem.  I checked my error messages and noticed that when I fell off line, most of them involved a WININET problem.  I know little or nothing of WININET, but it seems that this may be the problem based on the error messages 9 out of 10 say involve this part of the Microsoft software.  It's just a guess on my part, but the problem becomes very irritating to say the least.  So, if someone can you please throw some light on my problem it will be greatly appreciated? This WININET error message might have nothing to do at all with hit his offline, but thought I'd ask at least satisfy my limited knowledge of computer programs.

  Thank you

  Gordon

  Gordon

  To see if your system or software from AOL, what happens if you connect to AOL by using another browser (like Firefox or IE)?

  Wininit is part of the operating system and usually if it was the problem you would have other problems on your computer then I suspect it's an AOL software

• I can't connect to my itunes account, infact it kept sending me an error message (310). How can I solve this

  I can't connect to my iTunes account, indeed it kept sending me an error message (310). How can I solve this?

  Try this procedure below it can help you!

  (1) open Internet Explorer, and you will probably get a message "Poxy server is not responding.

  (2) If this is the case, go to "Tools" in the toolbar of browser select 'Internet Options'.

  (2) to "I havethe nternet Options"window that appears, click on the tab "connections" at the top.

  3) click on 'network settings' at the bottom of the section.

  (4) if the "Proxy Server" box is marked with a check, click to uncheck.

  5) click 'Ok' to close the window "local area network (LAN) settings".

  6) click on 'Ok' to close the 'Internet Options'.

  (7) either refresh the page or close and reopen Internet Explorer, it should work now

• development of select area seems missing from my machine. What should I do?

  development of select area seems missing from my machine. What should I do?

  Can you show a screenshot? This is where it should be. What version of Photoshop are you using?

  

• I get an error message: resource files invalid or missing "Exetender Fatal Error" in the installation directory. Please reinstall Extender player. How can I do this? What is the Exetender Player?

  Unfortunantely I purchased RegCure and did a scan and deleted some of the files they said error.  I tried to help and they said that their goods should not remove anything that needs the computer.  They said it was beyond their help and give me a refund.

  I want to restore this file Extender player.  can you help or direct me to someone who is capable of?

  Thanks for your time.

  Jersey Fran

  Hi JerseyFran,

  Welcome to the Microsoft Answers site!

  When you get the error message?

  Did you change the computer that is causing this problem?

  This happens usually if you uninstalled an application that has been installed but it was not always full uninstalled from the computer. You can use the Windows Installer Cleanup utility to uninstall the program completely. Follow the link given below to download the utility.

  Download the Windows Installer CleanUp utility

  http://support.Microsoft.com/kb/290301

  We downloaded it, install it. Restart the computer and then run it. When you launch it, you will get a list of the applications that you want to delete. Select the appropriate message and follow the instructions on the screen.

  You can also visit the link below and check if it is a help.

  http://social.answers.Microsoft.com/forums/en-us/vistagaming/thread/6cf0189d-84a6-4346-A7BB-a1ad5e845484

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message on my Vista computer: missing or damaged file: C:/windows/system32/drivers/ATAPI.sys. (Status: OXC0000098). NO RECOVERY DISK! (lost).

  Missing or damaged file: C:/windows/system32/drivers/ATAPI.sys. (Status: OXC0000098). NO RECOVERY DISK! (lost). How can I recover my system, if possible? It does not even start.

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  The Startup Repair tool can repair atapt.sys.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (click on the F8 key during startup and go into safe mode with network - or using the prompt from the disk, if necessary, several times).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator (skip thiis step if you use the disk)...

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  In a best-case scenario, he'll fix Atapi.sys.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If it does not, then thanks for posting any repetitive error message in Event Viewer on startup (Start / Control Panel / administrative tools / event viewer - type eventvwr and enter, if do it from the command prompt).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

  I hope this helps.  Post back the results of the analysis and attempts to repair if these do not work.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• Get the error message - Installation Failure Windows Installer not installed correctly when trying to install iTunes

  Original title: Error Message: microsoft windows install not installed correctly

  I'm running on Windows Vista 64-bit.  When you try to download iTunes for my iPad2 (now!) I get an error message when you have almost finished, saying "failure of the Installation Windows Installer not installed correctly.  I've looked everywhere for help.  Tried the auto-fixit... nothing.  Cannot find on my computer to try to do a uninstall, re - install Windows Installer.  (not quite tech-y to see if this is possible or if it would even help.  Please Please someone share their expertise?  Thank you very much, C.

  Hello

  For telephone assistance from Dell, you can consult the site mentioned below:

  http://www.dell.com/support/incidents/us/en/19/Phone/PhoneTagEntry?c=us&s=dhs&cs=19&l=en.

  For more support options affect the site mentioned below: http://support.dell.com/support/topics/global.aspx/support/dellcare/contact_technical_support?c=us&l=en&s=dhs& ~ ck = nohold'a.