Error message is Boot Device not found, Hard - Disk (3F0)

Similar Questions

• I have a hp mini 311-1037nr who recently failed to start. data error is "boot device not found.

  My hp mini 311-1037nr does not start. Its running windows 7 and no changes have been made. Error message is "boot device not found. It will not run a hard drive test, gives "the hard disk does not exist '. Tried not to reset the default settings of the BIOS also no luck. any ideas?

  Drive appears you in the BIOS? If not, and if reinstalling it does not help that I assume safely that the hard disk is dead.

  You can also try to download/creation of the various Linux Live boot floppies [Unbuntu, PartedMagic, etc.] to confirm that your other components are not at fault. If you can start and run a live linux OS then your other components of the system may very well.

  You can also remove the drive of your machine and install it as a secondary drive in another computer or a disk to see if you can access it.

  You can also run a HDD diagnosis by accessing your site of hard drive manufacturers and download/creating a diagnostic boot disk.

• Boot Device not found please install a hard disk operatong system

  Boot device not found please install an operating system on your hard drive

  Hard drive (3F0)

  The F2 System Diagnostics

  For more information, please visit

  \go\techcenter\startup www.HP.com

  When a m do diagnostic tell me

  Smart check: not installed

  Long DST: not installed

  I buy in may 2013

• 15 - p030nr: Boot Device not found

  Need help on how to fix a problem where it says "boot device not found." He worked to find one day and the next time I turned on the computer, she appeared with this error message. After reading some things, it seems that it is a right of common mistake around the 1 year mark, but I don't know which is correct. Are there methods I could do to fix this problem.

  OK, if it was an old PC, my guess would be that the hard drive is a failure, but on a PC old of a few months, it is unlikely.

  However, it would be interesting to follow these instructions to check the hard drive:

  Presume withdraw OK, what might work is booting from CD or USB and running CHKDSK to see if this helps to repair the file system.

  CHKDSK is the short name of a utility that provides MS that will do a check of the file system and attempt to repair problems.  A damaged file system may prevent your computer to start correctly and get to a Windows desktop.
  
  Because you can not boot from your PC, then you need to download one of the following options and follow the instructions it contains to make a bootable USB stick or a CD:
  (1) miniTool Partition Wizard
  (2) EASEUS Partition Master
  (3) assistant Partition AOEMI
  
  Once the media, boot from it and use the option to check the disk.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Wanted M6 Windows 8: Windows 8 HP Boot Device not found Help!

  Help me my TI shows on my screen of Boot Device not found HDD (3FO)
  Please install an operating system on your hard drive
  F2 System Confugaration
  My Bios Version is 1.6.0.0
  I use a laptop
  When I click on f2 it shows on my screen
  The background is completely black and
  He said test test memory hard drive only
  Memory is passed
  Drive hard but not installed
  Long DST not installed
  Please help me I want to buy another computer!

  Adequate replacements:

  http://www.TigerDirect.com/applications/SearchTools/item-details.asp?EdpNo=8158167&CSID=_61

  A little faster 7200 RPM. 5 years warranty vs 2 years for the hard disk which above:

  http://www.TigerDirect.com/applications/SearchTools/item-details.asp?EdpNo=9585218&CATID=1277

• Pro 608: HP 608 Pro will not boot-Boot device not found

  I got my new Pro 608 and installed my software after upgrade to Windows 10. Do okay, but the next day, nothing works!

  Keep saying that Boot Device not found!

  Not sure but it could be HP shield encryption does not work well? now, he cannot read the HD? or HD shot?

  I tried to restore default - but still does not work. Now other bios diagnostics no longer work. That is to say he's corrupt!

  Tried to update the bios, but doesn't seem to work. The bios still say 7/2015. I tried to update the bios 9/2015. Also used 7/2015 bios, bios Diagnostics but still does not.  I use a USB port and a connector USB Belkin C - I think not that it really is booting from the USB key to install the Bios.  I set the Bios to activate the firmware-C update.

  Sue, the best thing you can do since it is a new Tablet is contact HP Support directly for warranty repair.

  Most likely, they will replace the unit.

  Contact HP worldwide | HP® official site

• Pavilion DV7 6c50eb: Boot Device not found

  Hi all

  I just change the HD of my laptop and after booting with the Win 7 DVD and install the operating system, I get this screen "Boot Device" not found.

  I am able to boot with the DVD, but I can't the normal HD boot.

  This is a new HD, it's all clean and working, I re-install after the first failure but still the same issue.

  Please let me know your thoughts

  Thank you very much

  FX

  I change the port on the motherboard, everythings works now... I believe that the port was not active and I have found no opportunity to change the option in the bios... duration of the other port have solved the problem.

  See you soon

• I can't extract the zip files; I get an error message that says: "Application not found".

  I can't extract the zip files; I get an error message that says: "Application not found".  When I check help & press the Start button, it tells how to do it.  I thought a program to automatically extract compressed files came with Vista.

  Hello

  1. you use the functionality of Windows Vista to unzip file or third party software?

  2. have you done any software or hardware changes on your computer before this problem?

  To work with this problem, see the following methods.

  Method 1:

  Scan of the SFC

  Refer to this article for more information on how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7.

  http://support.Microsoft.com/kb/929833

  View the results of the analysis.

  Method 2:

  Run the fixit from following link.

  Difficulty of broken desktop shortcuts and common system maintenance tasks
  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  In addition, I suggest you to check if the .zip file has been associated with a particular program in the section default programs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  Check if it helps.

• Receive error message: "help topic is not found. This content under construction. We were able to retrieve the requested topic. »

  original title: Windows Help and Support link no longer works.

  Very recently, in trying to use the help and Support Windows a blank page appears with the following error message:

  Help topic "not found".

  This content under construction

  We were able to retrieve the requested topic. »

  The same problem also happens with IE8 help and Support.

  Hello TodAce,

  Please see the link below on the Microsoft TechNet Forums.  There is another user posted the same error message.  Please let us know status.

  Help and Support - screen text formatted correctly hyperlinks / missing

  http://social.technet.Microsoft.com/forums/en/itprovistasetup/thread/b3a7ddd0-59D3-4386-ab70-3f48424447b6

• Error message "Required line was not found in the INF" LifeCam Cinema 3.0 on Windows Vista Edition installation Home Premium

  The LifeCam Cinema hardware installation error
  
  Tried to install Lifecam Cinema 3.0 but keep on receiving an error message "Required line was not found in the INF" - OS is Vista Home premium edition

  LifeCam installed on my laptop XP

  Hi seuss460,

  LifeCam software version 3.2 is available; Make sure you install the correct software for your hardware.

  You can download software LifeCam here

  Step 1: You can follow the steps mentioned in the article below

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  http://support.Microsoft.com/kb/953691

  Step 2: See also the steps mentioned in the article below

  Troubleshoot failures to find the new LifeCam hardware

  http://support.Microsoft.com/kb/929087

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion: Boot Device not found install an operating system from hard disk (3F0) hit administrator 69599233

  Device not found Boot Install an operating system press F10 to reset factory and she request password have my pw does not give me the code 69599233

  Hello

  Thanks for posting in the HP Support forum. Welcome Onbord!

  Regarding the admin code you have give, please keep the power button hold for a while until that the PC stops. Repeat using the power button and

  as soon as you do, keep hitting the key Esc (as tap-tap-tap) - you will enter boot HP like this menu:

  

  Press F10 to enter the BIOS and when it asks for password, please enter this code 76491815 to ENTER.

  Follow the on-screen instructions to change the password or delete.

• Boot Device Not found

  So my problem started when I turned off my laptop, then when I went to turn it on a message pop up saying selected boot image has not authencate I did a hard drive restarted and then when I did it says device not found Boot so I did a hard drive check and he says smart check don't installed and not installed long dst

  You can order the recovery media to install Windows on the new drive. Scroll the list of the software/drivers to see the option:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=us&DLC=en&sw_lang=&product=5312258

• All of a sudden my computer when I turn it on says Boot Device not found.

  OT:Boot Device not.

  All of a sudden my computer when I turn it on says device not found Boot, please install an operating system on your hard drive, hard Drivr - (3F0), F2 System Diagnostics. My cd/dvd does not work, but I have a flash drive and an external hard drive with the recovery on this disc but it does not start similarly access flash or external. F10 boi configure options to no effect. Help me please

  Hello

  Since then, will not start to any device, it's a hardware problem. If you need the help of the
  Manufacturer of the system or a real computer store (that makes its own service in the workshop).

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• "Boot device not found" Message After BIOS Update

  Today I was invited by the HP Support Assistant software that a BIOS update was available, so I got the application download and install the update. When the computer is back to the top, it says the boot device is not found.

  Ugh.

  Can someone help me with this?

  I have a HP ENVY TouchSmart m7-j010dx Notebook PC running Windows 8.1. Laptop was working fine before the update, which means that I probably would not have allowed the update of the BIOS.

  I found the problem (for me, anyway).

  1) go into the BIOS (F10 from your black screen) configuration settings.

  (2) fix the "Legacy Boot Options" and save your changes.

  As soon as I did it, it starts immediately in Windows.

• No boot device not found error on R610 after the OS installed

  Hello

  Then I configured the Raid 1, installed Windows server 2012 R2 from USB. But when the system reboots after the installation it says it us no available boot device. I tried to start it manually by the raid controller but still said the same thing. The boot is BIOS.

  I'd appreciate jf you could help me look on this site and running.

  Thank you

  Feri

  Hi Robert

  Thanks for your message, I solved the problem

  The boot sequence was set correctly and I also tried to boot from the RAID directly, the problem was the firmware. I've updated all the firmware and that fixes the problem.

  Thanks for your help

  Faya