Error message "Required line was not found in the INF" LifeCam Cinema 3.0 on Windows Vista Edition installation Home Premium

Similar Questions

• Plustek OpticBook 3600 will not install error that an error occurred during the installation of the device. The required section was not found in the INF

  Original title: Plustek OpticBook 3600 is not installed

  Found new hardware wizard runs, but after scanning stops the disc from the manufacturer with the message ' year error occurred during the installation of the device.»  The required section was not found in the INF"

  PC system is homebuild which, in theory, exceed the minimum requirements of the system of manufacturers.  Operating system is Windows XP Pro with Service Pack 3.  The scanner is connected to the USB 2.0 card that is not separately powered, but installed in the PCI slot.  I suspect that the problem lies in the PC rather than the scanner. but do not know what the problem is.  Any help would be appreciated!

  Hello
  You can try the troubleshooting provided in the link below steps to fix the problem.

  You receive a "unable to install this hardware" or "an error has occurred during installation" error message when you try to install a PCI device

  http://support.Microsoft.com/kb/841567

  Note:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  See also:

  Error message: cannot install hardware. An error occurred during the Installation of the device

  http://support.Microsoft.com/kb/810882

• Receive the error message "query Kort is not found in the winitnet.dll.

  How can I get rid of query Kort is not found in the winitnet.dll

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. when exactly you get this error message?

  Please answer these questions and tell us more about the issue. This could help us help you better. However, try to perform the SFC (System File Checker) scan on the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

• error message recurring 573 Ordinal not found in the iertutil.dll library of dynamic links when I try to open some windows.

  error message - 573-Ordinal not found in the dynamic link library iertutil.dll when I try to open some windows. Also when trying to open windows help, says it is not found. Any suggestion is welcome.

  Had the same problem and fixed it. Had tried all ideas that Microsoft had and that they did not fix the problems. I have seen that many peoples problems began after may windows update (mine did at), found two dealing with update to IE9. I uninstalled both and that fixed the problems. The numbers update
  KB2820197
  KB2847204
  After you have uninstalled those reboot and everything so well.

• Purchase a new sealed copy of the upgrade of Windows Vista Edition diskette Home Premium. I found one on which the label says "for distribution in the United States / Canada only. Will this work without problems on a PC in the United Kingdom

  "U.S. / Canada Distribution only" disk for use in the United Kingdom?

  I want to buy a new copy sealed the Windows Vista Edition upgrade disk Home Premium. I found one on which the label says "for distribution in the United States / Canada only. Will this work without problems on a PC in the United Kingdom please? Thank you.

  Hello

  Yes, it will work. However I recommend to buy the disk to upgrade of the United Kingdom.

  The Windows Vista DVD upgrade that you get in the United Kingdom is different from what they get in the United States.

  Please follow the link menitoned.
  Choice of installation for consumer versions of Windows Vista (32-bit only)
  http://support.Microsoft.com/kb/932616
   
  I hope this helps.

• Error message "5377 xlive.dll" not found in the library link when trying to play F1 2011

  Original title: f1 2011 5377 xlive.dll error

  Hello
  When I opened f1 2011 the game it gives message not found 5377 xlive.dll in the liberary link.
  and I try a lot of things
  1. install games for windows marketplace and to update
  2 - Download the xlive.dll file and located in System 32 and the game folder
  3. use the command prompt start menu

  so I tried my best and I need your advice...
  Thank you

  Hello

  1. what operating system is installed on the computer?
  2. were there any changes (hardware or software) to the computer before the show?

  Put the computer to boot and see if it helps.
  To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: follow step 7 to reset the computer to start as usual after the boot process.
  http://support.Microsoft.com/kb/929135

  Note: follow step 4 to reset the computer to start as usual after the boot process.
  http://support.Microsoft.com/kb/310353

  Hope this information helps.

• I intend to install Windows 7 Home Premium Windows Vista Edition upgrade Home Premium. Microsoft Frontpage 2002 is compatible, and it will work correctly? FrontPage 2003 is listed as compatible, but not of Frontpage 2002.

  Microsoft Frontpage 2002 SP3 is compatible with Windows 7?  I intend to upgrade to Windows 7 from Windows Vista, but my most important request and the need is to maintain my web page that was created and is managed by Frontpage 2002.

  This is the Forum for Windows Update .

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 Hardware/Software Compatibility Center.

  For any other question of Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  All Windows 7 issues (other than Windows 7 update issues) should be directed to the it.

  See you soon. Mick Murphy - Microsoft partner

• Firefox opens not shortcuts or icons. I don't know how to fix it. Help, please. 3.6.14, windows vista edition Firefox Home premium. Thank you, dustyantique

  This isn't a new download, it works well for more than a year.

  See:

  • http://KB.mozillazine.org/Browser_will_not_start_up

• The required line not found in the INF.

  I tried to install a webcam Logitech QuickCam® Communicate STX (x 64 compatible Vista) on my new Vista SP2 Home Premium 64 x machine. I received the following message is displayed after the installation of the material: "the required line was not found in the file INF." it does not say what the "required" line is just that it is not found. I downloaded the latest Logitech drivers, and it's the same thing. After much research and attempts to solve the problem with the advice of the Logitech, Microsoft, anyone frome one search on Google that had a suggestion, I bought a "LifeCam Cinema" model number 1393 brought home and follow-up instructions instalation - same as before. I downloaded the latestest microsoft drivers, uninstalled "LifeCam" then installed the latest drivers. The same thing happened again. Is someone can you please tell me what the "required" line is to. It seems not to be in any installation downloads.
  Thanks for your suggestions.

  Hi geojayhwak,
  Post here your number for this logitech webcam p/n.

  If you do not now where you can find it check this document: find the part number, model number and product code on your QuickCam Communicate STX

  If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

  If your issue is resolved, please indicate then your wire is with solution.

• I can't extract the zip files; I get an error message that says: "Application not found".

  I can't extract the zip files; I get an error message that says: "Application not found".  When I check help & press the Start button, it tells how to do it.  I thought a program to automatically extract compressed files came with Vista.

  Hello

  1. you use the functionality of Windows Vista to unzip file or third party software?

  2. have you done any software or hardware changes on your computer before this problem?

  To work with this problem, see the following methods.

  Method 1:

  Scan of the SFC

  Refer to this article for more information on how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7.

  http://support.Microsoft.com/kb/929833

  View the results of the analysis.

  Method 2:

  Run the fixit from following link.

  Difficulty of broken desktop shortcuts and common system maintenance tasks
  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  In addition, I suggest you to check if the .zip file has been associated with a particular program in the section default programs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  Check if it helps.

• Receive error message: "help topic is not found. This content under construction. We were able to retrieve the requested topic. »

  original title: Windows Help and Support link no longer works.

  Very recently, in trying to use the help and Support Windows a blank page appears with the following error message:

  Help topic "not found".

  This content under construction

  We were able to retrieve the requested topic. »

  The same problem also happens with IE8 help and Support.

  Hello TodAce,

  Please see the link below on the Microsoft TechNet Forums.  There is another user posted the same error message.  Please let us know status.

  Help and Support - screen text formatted correctly hyperlinks / missing

  http://social.technet.Microsoft.com/forums/en/itprovistasetup/thread/b3a7ddd0-59D3-4386-ab70-3f48424447b6

• When I try to open the Wacom tablet properties it says "error a supported tablet was not found in this system."

  Tablet not working help please
  OK so I have a tablet that I use to draw for my photoshop... it worked perfectly fine but when I tried after months of non-use, it won't work. and when I try to open the Wacom tablet properties it says "error a supported tablet was not found in this system." I know that it worked because I installed it but now it's just dosnt work... Please help me because I want to draw again.

  Hi LoverofDrawing,

  I suggest you reinstall the drivers for the tablet on the computer by visiting the manufacturer of the Tablet and check if it helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• ACS 5.2 error 22056 object was not found in the identity applicable store (s)

  Hi, I have two ACS v 5.2 (primary and secondary) and some users are in stor in-house and others are in the ad.

  Local site topology is like this:

  PC - AP - WLC - ACS - AD

  Authentication method is PEAP(EAP-MSCHAPv2), and all users have the company certificate installed. In users of client OS is Windows 7.

  Users worked very well, but some reports disconnections of intranet users. I see in the ACS connect many "22056 object was not found in the identity of the point of sale." and "24415 Active Directory user authentication failed because the user account is locked out" alarms.

  I thought that it was because the user located in the AD of basic data, but sometimes the same user is authenticated successfully and other that I see the "22056..." or "... 24415" alarm signals.

  I changed the primary role for ACS to works as secondary and we see the same alarms.

  I Don t know is a matter of ACS, and how to resolve this...

  Please helpme

  Thank you...

  Hello

  How you are authenticating these users? They are present in the local database of GBA? If so, have you checked the State from inside account to see if the user account is still active and that it is not disabled?

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• ERROR: WebVPN capture directory was not found.

  I'm doing a capture of packets to debug a problem of user webvpn.

  capture the test user type webvpn (I enter a username valid vpn)

  then stop the capture.

  No test of capture

  I get the following error: "ERROR: capture directory WebVPN was not found."

  Capture worked the first time and created the test_capture.zip file.  Then, when I run the capture again and used the same name, it returns this error. Now even after deleting the file, or even change the name, it always returns the same error and does not create a file. I tried to create a directory "WebVPN" but that did not help. I have enough space on disk0.

  Any help appreciated. Thank you.

  Try to stop the capture by using the following command before the disconnection of the webvpn user session:

  No capture test type webvpn users

• Installation of Oracle 11 g on windows, error: specified home was not found in the registry

  Hi gurus,

  I installed 11 GR 2 on windows server 2012, due to certain constraints I uninstalled the software of oracle 11 g,

  again I tried to install 11 GR 2, but got error like "ORA-12543: TNS:destination unreachable host"

  After getting this error, I removed all the registers of the oracle. now try to install oracle 11 g 2.

  After 88% am getting error "shown at the reception was not found in the registry.

  Thanks in advance.

  Thanks and greetings

  REDA

  If you want to re-evaluate 11.2.0.4, you will need a support contract paying since 11.2.0.4 is available on MOS.

  The other option would be to install 12cR1 - tasks of preinstallation of Oracle databases - which is available at Oracle Database Software Downloads | Oracle Technology Network | Oracle

  For other options, pl contact your Oracle sales team