error message on photosmart 2610 all-in-one
When you open the software of my printer gets a blue screen with error 0x887dc92e. Please help can not use software and printer closing off does not help... all solutions
OS is xp, I found a solution to the problem, I went to my computer, icon of the memory card offline hp and that solved. Thank you for your response. appreciate it
Tags: HP Printers
Similar Questions
-
Photosmart 2610: Photosmart 2610 All In One
I recently had to reinstall my HP Photosmart 2610 all-in-one.
I have the software comes from www.hp.com.au and installed it. At the end of installation, I've set up and the printer print a sample page.
When I went into settings it has shown that a Photosmart 2610 printer has been connected to the PC >
However, when I try to print anything I get redirected to the "Send Fax" page, and the document will not display.
Help! hehehe
Phil
Try to reinstall the software, use thislink to dnload the driver full features and software.
-
Series of HP Photosmart 2610 all-in-one, print only in black and white
Series HP Photosmart 2610 all-in-one (printer, fax, scanner, copier)
Model SDGOB-0304-01
Windows 7 32 bit
I have changed black only, now cannot retrieve colors. Forgotten what I've done, so any help appreciated.
In the printing preferences: -.
1 Advanced color settings set to '0 '.
2. choice of color - print in grayscale - 'unchecked '.
3. within the framework of advanced document - print all text in black: (disabled)
These measures appear to be in place. Have you, you click on apply after you have changed these settings.
You can try uninstalling and reinstalling the software and drivers. This will reset all back.
-
Any error when printing with HP Photosmart 2610 all-in-one
My trusty printer I've had for 5-6 years suddenly shows an error message when I try to print. There are no codes or descriptions that allow me to try to isolate the error, just 'mistake' in the print queue. I tried various different print files, restarted, I unplugged and restarted etc but without any luck.
Can someone enlighten us or offer some suggestions?
Thank you!
Recently upgraded to 10.6?
First of all, in the Apple (top left of your screen) menu run software: over and over until that there is no more. You should be to 10.6.6.
-
E-mail HP supports, ticket no: 8028153835
I bought my printer all-in-one HP Photosmart 2610 in 2005. It has already been installed on a HP laptop, Windows XP computer, and worked all the features.
He is now on a PC running Windows Vista Ultimate 32. When I tried to install the CD, it wouldn't load because of the Vista OS. Then, I loaded the printer driver HP Photosmart 2600 series full of features (Vista compatible OS) to the following HP Web site link:
Now I can't get the print preferences to print (double-sided) of manually printing two-sided. This option is available on the original printing software.
I tried the solutions: HP Image Zone help / duplex prints that show: click the finished tab / in the Document options box / select print on both sides checkbox (this check box is not available).
When I run the printer of the Panel as an administrator, the printer properties / device watch manual duplex settings: enabled. When I go to the printer properties / Advanced / impression of the default values, or the finish / Print On Both Sides checkbox is available nor printing Shortcuts tab will allow the option Print On Both Sides to appear (shows that Print On Both Sides: Off).
E-mail support HP told me to install this patch to correct the problem:
When I try to install the patch, it will not load because he wants the original CD software. So I'm back to my original problem trying to load the original printing software does not load because the CD is for Windows XP operating system. I'm in the stalemate between the software CD I have, and what is available on the HP site.
What is your solution?
I chatted with a HP technician online today. I had the same problem with Vista, not to recognize the Manual 2 sides print. His solution was to add a new printer, the HP Deskjet 6500. This works!
Go to control panel, hardware and sound, add a printer, add a local printer, select port to use, select HP Deskjet 6500, following, then select if you want whether it is your default printer and then click Next.
Two back will be available when you select the Deskjet 6500 as your printer, even if you actually use your HP 2610.
-
Error message HP officejet 7210 all-in-one
That means the error: 0X884c0a9a1:B'08! mean, my printer will not stay in the mode of operation and continues to Flash this error message. I turn the printer off and it resets and works for a short period of time and then goes back to flashing the error message, thanks!
Here is a link to a document that deals with the alphanumeric codes for your printer model. Generally, alphanumeric codes appear when there is a problem with the hardware of the printer. A hard reset is used to put the printer back into a known working state. This document describes this process. Here is the link: http://goo.gl/sAL8i. I hope this helps.
-
HP Officejet 6500 e709a: Error Message When you install all in one product
I'll have to re - install my HP Officejet 6500 e709a software. I get the following error message when I try to install it. Someone at - it suggestions on how I can fix this?
Thank you
JN
Hi @MattNC79,
Welcome to the Forums of HP Support! I understand you are trying to reinstall the software and drivers for your HP Officejet 6500 to the computer running Windows 8.1 operating system. When you try to install, you get an error message with an error code. I would like you to click on the link below to begin:
Please let me know the results, I'll watch for your reply.
Thank you
-
Photosmart 2610 All In One + OSX 10.6
Worked fine on Leopard now with Snow Leopard print works but no fax or scanning.
The printer is connected to a Time Capsule via USB
Have tried the instructions on:
http://support.HP.com/us-en/document/c01846935
With no luck - any suggestions?
Thank you
Hello robps,
I think the problem is that the scan is not supported when connected via USB to an airport. It's the same situation as Leopard. It is not supported scanning via a USB connection to the airports. This is a limitation of the airport, only printing is supported via USB port connections.
As test, connect your Photosmart 2610 directly on your Mac with USB cable - print and scan times should work correctly.
-
HP Photosmart 2610 all-in-One printer
I had problems to download the driver package and help to reinstall my printer after doing a recovery on my PC. When I downloaded the package from the HP site it would not install after that I turned on my printer for Setup connect with the printer. So I did what is obvious and allowed Windows 7 to install the drivers for me. However, the aid package that allows me to scan from my printer to my PC have not been installed by Windows 7. Research of the HP page still yet I discovered that the aid package cannot be downloaded separately without drivers. I need to use my scan function yesterday. Someone at - it an option that I can use to correct the to this problem please?
Hi ariesm47,
Looks like that the installer does not work correctly. Follow the steps below and let me know what happens?
First step: clear temp directory
- Type %temp% term or search programs and files of field
- Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
- Proceed to step 2 below
Second step: downloaded and extracted to your system:
1 download the drivers and full software features
Note: Go to HP customer careand then enter your printer model. Download full feature software and driver and then follow the remaining steps below. If your product does not have the uninstall_l4 so please let me know what printer you have and the operating system you are using.
2. once the download is complete, double-click the file to extract the software.
3. when the installation window opens, press the Cancel button to stop the installation
4. tap folder in the race or search programs and files of field
5. Locate and open the folder starting with 7z (example: 7zS2356)
6. right click on the folder and select copy
7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.
8 open the 7z, that you just copied on your desktop
9 open the Util folder
10 open the CCC folder
11 start the uninstall_L4 (.bat or .exe)
12. once the uninstall is complete, restart the computer
13. run disk cleanup from the tools Accessories\ system under all programs folder
14. download and install the latest version of Adobe flash player
http://www.Adobe.com/support/flashplayer/downloads.html
15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.
Let me know if you are able to successfully install the software and driver and are able to print & scan?
-
Stuck on error message-HP Officejet 7310 all-in - One Printer
I received a message "check color cartridge" on several occasions, so I disconnected power and reconnected. Now printer is stuck with flashing lights and following message: error: OxcO620004
_________________
411:lib_micci2.c
I will not erase and returned just if I disconnect power and reconnect it.
This could be the highlight of death for your printer. There is still a reset, you can try called a partial reset.
To make a partial reset:
- Make sure that the printer is turned on.
- Pull out the power cord from the printer.
- Pull out the power cord from the wall.
- Wait 30 seconds.
- Plug the power cord into the wall, but are not reconnect the printer again.
- Press and hold the 3 and # buttons on the printer.
- While maintaining the 3 and # buttons, plug in the printer.
- As soon as the lights turn on, release the buttons.
If the partial reset doesn't fix it, you will need to get a new printer.
-
There is something or someone blocks my printer to settle. Even go to configuration/Printers Control Panel I can't add the printer.
Try adding "printer services" in windows components...
-
Photosmart C6380 all-in-One - printer error message question
I have a HP Photosmart C6380 all-in-One printer. It worked well for a number of years, but last year, whenever I want to print something, the orange light blinks and an error message is displayed in the window. It is said: ' Please Oxc19a0035 turn printer off, then on. If - before the printer print, I must turn off first and then on again. It's more boring, to say the least. Does anyone have a suggestion as to how I can solve this problem? Thank you, Ms. Dahlia
The troubleshooting steps described in this document may help to resolve the error.
-
Hello
I have a problem with my HP 6280 All in One Printer. There are a few problems and it's really annoying, I wonder if anyone can prove useful please?
I uninstalled the software and drivers for the Photosmart series C6200 of the site, and when re installation, the software starts uninstalling itself and gives the following message:
"Error - wstub 197370'
"Fatal error during Installation"
And then starts to uninstall the entire software package and then request to restart to uninstall complete.
Once restarted, the whole scenario goes in a loop that is the uninstall process? Very confusing indeed and have never experienced this kind of problem before!
All advice is appreciated.
Best regards, K
Hi @k_san7,
Welcome to the HP Support forum.
I understand that you found "error - wstub 197370' and"Fatal error during Installation"messages when you try to install the software and drivers for the HP Photosmart C6280 all-in-One printer on your Windows PC 7." I would like to help with that.
I searched our database for "error - wstub 197370' and did not find anything related, but I found some documents related to"Fatal error during Installation"errors." Here is a document that can help - Displays A 'fatal error' during HP Software Installation (Windows).
I'll try to uninstall the software and printer drivers. Click here if you need help with uninstalling.
Then I would erase the temp directory.
1. tap folder in the field "search programs and files".
2 Select all the files in this folder, and then press the delete key to remove.
Once removed to close all windows and restart the computer.
When the computer restarts, download and install the latest version of the software and the printer drivers.
Here's a direct link to the software and drivers for Windows 7 - HP Photosmart series C6200 full feature software and driversprinter.
Please let me know if that solves the problem, or if you need assistance.
In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.
Thank you!
-
HP Photosmart 3210 all-in-One of network error printing from Windows 7
Impression on Photosmart 3210 all-in-One on the home network in Windows 7 Acer Aspire laptop breaks down
-message is "error printing". Printing to the same printer via USB connection is successful.
Printing by the same network of other Windows 7 laptop (Sony) and Windows XP (Dell) works very well.
Used HP diagnostics to ensure drivers/software updated and used HP network diagnostic utility
to confirm the printer is visible on the network that it is. When the printed test page is selected, but nothing happens.
Hello
Thanks for posting,
This may be a problem with ports,
Please click on start and then click on devices and printers and then right-click on the Photosmart 3210 printer and click printer properties. In the printer properties window, click the ports tab and check if the selected ports is with the IP address of the printer also check if it is the WSD port. If the selected port is not the one with the IP address of the printer, select one with the IP address of the printer and also make sure that it's not a WSD port and the TCP/IP port. If a selected port type is WSD, select Standard TCP/IP port with the IP address of the printer. If you can't find any port in the list with the IP address of the printer, and then click Add port and then select TCP/IP Standard and enter the IP address of the printer in the address field and add the port and then click on apply and then try to print.
If the problem persists even after ensuring that the selected port is with the printer IP address o FLE, then try disabling the firewall installed on your computer (if any) software and then try to print.
-
'ink system failure' error with code oxc19e0023 on a HP Photosmart Premium all-in-One Printer - C309
'ink system failure' error with code oxc19e0023 on have a HP Photosmart Premium all-in - One Printer - C309g - did all resets and reinstall the ink also tried to replace ink with new carts HP... frustrated please help
Have you tried the steps outlined in this article:
http://support.HP.com/us-en/document/c03081973If not try the steps and tell us if it helps.
Good luck!
Maybe you are looking for
-
How to add axis break in numbers?
Please see the following link for a graphical representation. https://alesandrab.files.WordPress.com/2014/03/broken-column.PNG
-
TestStand step to call a new instance of Teststand environment
I am trying to create a troubleshooting step and I would that this step to be able to open a new instance of the testbed environment. I if the troubleshooting step is encountered, the current sequence to stop running, open a new test sequence that wi
-
Viewing live Canon 50 d does not record
Hello I tried but I can't seem to find the answer. I have a Canon 50 d, I have attached to a telescope. It works great for photos. I want to take videos, so I plugged my laptop (Macbook) for my camera to use the Live View function. Live View mode to
-
I have install vista and I want to convey in the USB key... because my dvd drive does not work... Please tell me what I need to do Please send your reply to my email id, or post it here...
-
Problem synchronizing device WHEAT
Hi all. I have not found an answer to my problem here or elsewhere, so I'm posting it now: I'm trying to pair a watch of sensor and heart rate Mio Alpha (a WHEAT device Smart Bluetooth 4.0 needed) my Z2 (4.4.4 Android). This was partly successful sin