Photosmart 2610 All In One + OSX 10.6

Similar Questions

• Photosmart 2610: Photosmart 2610 All In One

  I recently had to reinstall my HP Photosmart 2610 all-in-one.

  I have the software comes from www.hp.com.au and installed it.   At the end of installation, I've set up and the printer print a sample page.

  When I went into settings it has shown that a Photosmart 2610 printer has been connected to the PC >

  However, when I try to print anything I get redirected to the "Send Fax" page, and the document will not display.

  Help!   hehehe

  Phil

  Try to reinstall the software, use thislink to dnload the driver full features and software.

• Series of HP Photosmart 2610 all-in-one, print only in black and white

  Series HP Photosmart 2610 all-in-one (printer, fax, scanner, copier)

  Model SDGOB-0304-01

  Windows 7 32 bit

  I have changed black only, now cannot retrieve colors. Forgotten what I've done, so any help appreciated.

  In the printing preferences: -.

  1 Advanced color settings set to '0 '.

  2. choice of color - print in grayscale - 'unchecked '.

  3. within the framework of advanced document - print all text in black: (disabled)

  These measures appear to be in place. Have you, you click on apply after you have changed these settings.

  You can try uninstalling and reinstalling the software and drivers. This will reset all back.

• HP Photosmart 2610 all-in-One, Manual Two - Sided Printing, HP support email Ticket number: 8028153835

  E-mail HP supports, ticket no: 8028153835

  I bought my printer all-in-one HP Photosmart 2610 in 2005. It has already been installed on a HP laptop, Windows XP computer, and worked all the features.

  He is now on a PC running Windows Vista Ultimate 32. When I tried to install the CD, it wouldn't load because of the Vista OS. Then, I loaded the printer driver HP Photosmart 2600 series full of features (Vista compatible OS) to the following HP Web site link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-47754-1&LC=en&DLC=en&cc=us&...

  Now I can't get the print preferences to print (double-sided) of manually printing two-sided. This option is available on the original printing software.

  I tried the solutions: HP Image Zone help / duplex prints that show: click the finished tab / in the Document options box / select print on both sides checkbox (this check box is not available).

  When I run the printer of the Panel as an administrator, the printer properties / device watch manual duplex settings: enabled.  When I go to the printer properties / Advanced / impression of the default values, or the finish / Print On Both Sides checkbox is available nor printing Shortcuts tab will allow the option Print On Both Sides to appear (shows that Print On Both Sides: Off).

  E-mail support HP told me to install this patch to correct the problem:

  http://h10025.www1.HP.com/ewfrf/wc/genericSoftwareDownloadIndex?softwareitem=MP-69848-1&cc=us&LC=en&...

  When I try to install the patch, it will not load because he wants the original CD software. So I'm back to my original problem trying to load the original printing software does not load because the CD is for Windows XP operating system. I'm in the stalemate between the software CD I have, and what is available on the HP site.

  What is your solution?

  I chatted with a HP technician online today.  I had the same problem with Vista, not to recognize the Manual 2 sides print.  His solution was to add a new printer, the HP Deskjet 6500.  This works!

  Go to control panel, hardware and sound, add a printer, add a local printer, select port to use, select HP Deskjet 6500, following, then select if you want whether it is your default printer and then click Next.

  Two back will be available when you select the Deskjet 6500 as your printer, even if you actually use your HP 2610.

• error message on photosmart 2610 all-in-one

  When you open the software of my printer gets a blue screen with error 0x887dc92e.  Please help can not use software and printer closing off does not help... all solutions

  OS is xp, I found a solution to the problem, I went to my computer, icon of the memory card offline hp and that solved.  Thank you for your response.   appreciate it

• HP Photosmart 2610 all-in-One printer

  I had problems to download the driver package and help to reinstall my printer after doing a recovery on my PC.  When I downloaded the package from the HP site it would not install after that I turned on my printer for Setup connect with the printer.  So I did what is obvious and allowed Windows 7 to install the drivers for me.  However, the aid package that allows me to scan from my printer to my PC have not been installed by Windows 7.  Research of the HP page still yet I discovered that the aid package cannot be downloaded separately without drivers.  I need to use my scan function yesterday.  Someone at - it an option that I can use to correct the to this problem please?

  Hi ariesm47,

  Looks like that the installer does not work correctly. Follow the steps below and let me know what happens?

   

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

   

  1 download the drivers and full software features

  Note: Go to HP customer careand then enter your printer model. Download full feature software and driver and then follow the remaining steps below. If your product does not have the uninstall_l4 so please let me know what printer you have and the operating system you are using.

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4 (.bat or .exe)

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• Any error when printing with HP Photosmart 2610 all-in-one

  My trusty printer I've had for 5-6 years suddenly shows an error message when I try to print.  There are no codes or descriptions that allow me to try to isolate the error, just 'mistake' in the print queue.  I tried various different print files, restarted, I unplugged and restarted etc but without any luck.

  Can someone enlighten us or offer some suggestions?

  Thank you!

  Recently upgraded to 10.6?

  First of all, in the Apple (top left of your screen) menu run software: over and over until that there is no more.  You should be to 10.6.6.

• HP Photosmart C4280 all-in-one no scan

  Although my printer works fine for printing and copying, I get error messages when I try to scan by pressing the button or by using the HP software

  I use the HP Photosmart C4280 all-in-one with a MacBook OSX 10.5.7 running

  I connect to the printer with a USB cable and have used the two USB ports to make sure that this isn't a wobbly port.

  When I push the scan from the printer button, HPScan starts, then an error message is displayed: The HP Communications Application does not run.
  When I run ScanPro the following error message: Sorry, scanner could not be initialized.

  I already downloaded and installed the latest printer driver.

  Any help would be greatly appreciated. My latest project continues upward while I try to scan to run.

  We will restore the print system:

  -Go to System Preferences > Print & Fax
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• HP Photosmart 2713 all-in-one scanning problem

  Hello

  I have a HP Photosmart 2713 all-in-one and installed OSX Mavericks. My print function works fine through "Printers & Scanners" in system preferences, however, I can't scan from this application.

  I tried to find software to download HP Scan that I didn't do it, but can't find the software for my printer/scanner.

  I also tried the other methods described for example by trying to browse an excerpt and the other options, but nothing has worked.

  Thank you

  Saami

  Hi SamiAR,

  Welcome to the Forums of HP's Support. I apologize for the delay in responding to your messages.

  The last driver full features for your Photosmart 2713 on Mac was for Mac OS X 10.6 Snow Leopard. I have included a document on the installation and use of the printer with Mac OS X 10.9 Mavericks.  I have also included a document on scanning with the Mavericks.

  V10.9 OS X Mavericks: installing and using the printer on a Mac

  http://support.HP.com/us-en/document/c03967522

  How to perform a scan: OS X v10.9

  http://support.HP.com/us-en/document/c03967506

• What is the difficulty for printer fault General 0x61000f6 for a printer hp photosmart premium all-in-one?

  1 HP Photosmart Premium all-in-One Printer (309 (a)

  2. Windows Vista 64-Bit family

  3. the general printer error 0x61000f6

  4. no change known to printer before developed problem

  0x610000f6 error code is an indicator of a jam of transport in the Photosmart C309a. Please see the document located here for the procedure to help fix a carriage jam.
  
  Let me know if it helps.

• HP Photosmart 3110 all-in-one: compatibility Windows 10

  I wonder if HP Photosmart 3110 all-in-one printer is compatible with Windows 10?  If yes how to install the driver (I can't find the installation disk)?

  Hello

  A basic set of printing and scanning for your printer driver is available for Windows 10.

  As the link above provided by @banhien seems to be broken, follow this link to install the printer on Windows 10:

  http://support.HP.com/us-en/document/c01796879

  Kind regards

  Shlomi

• Photosmart 2575 all-in-one

  Hi all

  My Photosmart 2575 all in one printer 'number of copies' is stuck on 8 copies.  I have the number 1 everytime I go to print something. I can't seem to find where to go as she fixed to 1 copy.

  I hope somone out there has an answer.

  Thank you

  Ron

  Hello RBigTuna,

  Welcome to the HP Forums!

  I understand that the printer is stuck on 8 copies and you want to manipulate parameters. Please see page 73 (76/142) of the product manual to modify and adjust the settings. Please let me know the results. Thank you!

  Mario

• Can not stop "auto crop" documents, scan on my HP Photosmart C7280 all-in-one

  I use a HP Photosmart C7280 all-in-one to scan documents.   My OS is Windows 7 64 bit.   I have used this configuration since January 2012 and my problem has just started in the last 30 days.  I did not any changes to the system except for the automatic updates of Windows coming out.

  I unchecked the box "automatically Crop scanned Documents" in the Advanced Document settings, but as soon as I scanned a page, the checkbox appears in the box again (in itself!) and it will automatically crop a bad document.

  No idea why this is happening and what I can do about it?

  Thanks for your help.

  Not really sure what caused it, but looks like the setting has glitched somewhere along the way and will be set when past.  Try unintalling to reinstall a new download.  Let me know what happens.

• How to install software for hp photosmart c5390 all-in-one on a windows 7...

  How do I install the software for HP Photosmart C5390 all-in-one on a windows 7. I don't have software cd for vista and mac.

  Hi Matt, thanks again for your quick response - which is certainly service 5 stars! Everything works fine now. I just got myself this new laptop - my first HP (Hp Pavilion DV7 6 c 80) and it is excellent, and I'm slowly he get it all set up. I can be naughty and ask you another question? I've (obviously) set up my hotmail on my HP. Do you know how I can remove my files from my old Toshiba Hotmail. I am giving my girlfriend and I want to set up his mail pop3 on it. Whenever I log into windows live mail on the Toshiba, my hotmail more old e-mails coming up on the screen.

  many ways, Ragnar.

• AirPrint can't find my HP Photosmart D110a all-in-one printer

  I have the iPhone 4 with ios 5.0, and it does not find my printer HP Photosmart D110a all-in-one and an AirPrint-compatible printer. I have everything set up correctly. I have the current firmware on the printer. I feel, keep printing everything wireless, I can print on my printer using the printer email address I put in place. It's just to kill me because I can't get installation to Airprint. I went through all that HP and Apple. Everything I find is for ios 4 and below. Can someone help me?

  It is compatible:

  http://support.Apple.com/kb/ht4356

  http://www.HP.com/SBSO/printing/Mac/Apple-AirPrint.PDF

  I can finally AirPrint. When you sent the message on the router, it reminded me to update the firmware. I've updated to the latest firmware of the router, reset the printer and my iPhone, and it finally showed up.