Problem synchronizing device WHEAT

Similar Questions

• iPod 120 GB Classic is recognized by iTunes, but it will not be synchronized. I ran the diagnostic. The connectivity of the device test showed the iPod, but when I ran the test of synchronizing device, it says that no device was found. It didn't Sync befo

  I have a version of the software running iPod Classic 2.0.4 of 160 GB. The iPod has not been synchronized for more than a month. I did diagnostic tests today. The connectivity of the device test showed the iPod, but when I ran the test of synchronizing device, he said that there was no iPod found. I checked and installed new updates, but it is not always sync. I restarted iTunes and computer, but it is not always sync. I ran a diagnostic on the device and it showed that it was operating normally.

  The iPod must be configured to synchronize automatically.  If this is not the case, click Sync does not synchronize no matter what.

  Select the iPod in iTunes, so that you see the iPod settings screen in the iTunes window.  Along the left side of the window, in the sidebar, under settings, click on music.  To the right, you will see a settings screen of the iPod music , where you tell iTunes how to sync songs to the iPod.

  NOTE: All the songs on the iPod that are NOT in your iTunes library (on the computer) will be lost.  If all the songs are in your iTunes library, no problem.

  At the top of the window, check the box to Sync music.  This enables automatic synchronization.  Below, select the option to synchronize library of ensemble music, if you want to 'all' in your music library to sync.  At the bottom, click on the apply button.

  From now on, when you make changes to your iTunes music library (like add new songs or update a playlist), iTunes automatically updated the iPod with the same changes when you connect (or click sync , if already connected).

• HP Pavilion p 15-200nq: I have all sorts of problems in Device Manager...

  Hi, I bought a laptop pavilion p-200nq, I installed windows and now I can not install the LAN, wi - fi, network and I have all kinds of problems in devices like Device Manager unknown ethernet cotroller, network controller, pci device and video controller...

  I don't know if it is where I have to post but... I have a lot of problems... I don't understand.. need help

  Hello:

  You should be able to use the W7 x 64 drivers and software from the HP Pavilion 15z-p000 CTO Notebook PC on your model.  Do not use the BIOS or firmware files but because they are the specific model.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-P000-notebook-PC-series/6936226/model/7174451

  In addition to the information above, you will need to also install the AMD Chipset drivers and reboot in order to install the smbus and usb3 controllers.

  First driver on the list.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

• problems of device drivers after reinstalling windows xp family

  I had to reinstall my windows xp home edition due to a virus. Now I am having several problems with device drivers. I can't find a video controller (vga) compatible, more there is a big question mark yellow on the other. What should I do?

  I have a hp pavillion ngn350 I had the motherboard and everthing updated 2 years ago, so when I do a check of the system it appears as a wind msi 120, my operating system is windows xp home edition. also whenever I try to play a computer cd game called the sims I get a message on directx 9.0 and I have the latest. My audio drivers does not show a problem in the Device Manager, but I don't have his and no drivers work. I tried to download realtek hd audio, but it still does not work.

  Get the Mo material card (chipset), go to its website mfg, get the chipset

  utility installation, this is the software and drivers for the components to run...

• Centro + Exchange: There was a problem synchronizing messages

  I followed the instructions on this page: http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/, /? St = 116, E = 0000000000145083804, K = 5545, Sxi = 18, case is Obj(45113) and I have connection problems. We use OWA and I can access this page from my phone and connect, but I get an error. I assume that the error is all simply because the page is too large for the phone to load. I know that the e-mail address and the password are good because I entered them several times and tried several accounts. If I have SSL on and the hit test I get the error: connection to Server error. Please check youre network or server and re-synchronization settings. If I disable SSL I get error: there was a problem synchronizing messages. If I put in what I know to be the wrong address with SSL off I get error messages from the server connection, so I think I'm at least getting the phone to see the server.

  Hey!  Update time.

  Kayden plugged away and got her headaches of restated certificate.  He ran Server2003 with Exchange2007 and we discovered that the previous admin never swapped the original self-signed certificate that Exchange moved with.  You know, - the cert that totally kills your ability to activesync, because it is not issued by a certificate authority valid with a server to export cert and inject it into a Centro (or other handheld).

  As a solution in the short term for his small business, he did not convince management to buy a commercial cert immediately.  Instead, they choose to install Server 2003 become business certification as their own certification authority root in trust with the ability to issue free self-signed certificates.  In addition, the Microsoft suggestion is that cert SAN is the best way to secure Exchange Server.  He has used a simple hack to activate his new CA to issue certificates of SAN and was able to issue a custom SSL certificate.  We are now ready to install and get things running.

  After a little confusion about which cert is supposed to go where (a root CA certificate was downloaded from the CA server to add to each customer so that they would trust self-signed certificates), the new SSL certificate has been installed by using Exchange Management Shell first IMPORT the cert, then turn it.

  Then, a test Cento was hotsync 'ed to add the new Board to the store root trust of the Palm OS' using this tool: http://www.palm.com/us/support/downloads/versamail/certmodtool.html

  VersaMail has been configured to connect to the Exchange 2007 server using the Regional service and the first synchronization went perfectly.  With sync "as items arrive" handheld is able to send and receive without any problem.

  Outlook clients were then the installation program to trust the new CA as well and everything went back to business as usual.

  Don't is love a happy ending?

  Message relates to: Centro (Sprint)

• Problem installing device a1530n

  Running Win XP Media Center Edition.  Had minor graphical problems at the top of the IE bar periodically endangered.  Decided to remove the Intel (r) 82945G Express Chipset adapter in Device Manager and then do a scan for new hardware.  And now I get the message of the new hardware detected that says.

  Cannot install this hardware

  There was a problem installing this hardware:

  Intel (r) 82945G Express Chipset Family

  An error occurred during the installation of the device

  Access is denied.

  I am connected to the computer as an administrator.  I tried to install this even in safe mode and get the same error above.  Any clues on what do I do?  The computer runs only in VGA mode.

  Thanks in advance.

  Link to screen shot of the error message.

• Problem Pairing device: Bluetooth virtual keyboard (VKB) detection of service failed

  Hi, I could use help to determine the cause and the solution to a problem I have. I want to associate this with my Toshiba Tecra M4-S435 keyboard. The laptop has an internal module installed, "Cambridge Silicon Radio, LMP (V: S) 02:0490." I installed the last 5.10.01 (T) BT stack. I have several other paired devices, but this one is the original questions.

  The unit is in the discovery as a keyboard VKB (it supports HID and SPP); I want to use the HID profile. In the authentication dialog, the VKB beeps, who is his warning that a PIN can be typed into the unit, but to hit the enter key, a dialog box informs me that "Detection of Service Failed". I've seen similar problems posted on the manufacturer's website, but I have not seen any resolution.

  Any help is greatly appreciated.

  Hello

  I m not an expert from BT, but if you have several other devices with your laptop coupled, then everything is ok with your Tecra M4 BT stack and the machine.
  It seems that there is a compatibility problem with your external virtual Bluetooth keyboard.

  Either the Toshiba BT stack does not support this VBK and service or the firmware of this device allows a few worries
  However, in case I would recommend contacting manufacturing virtual Bluetooth keyboard for more details.
  Guys should more known on own products as simple Toshiba here users in the forum.

  Good luck

• Satellite A500 USB problem - unknown device.

  Hello

  Have a Satellite A500 I recently restored to factory from the recovery partition and reinstalled my Win7 upgrade.

  I have a couple of unknown devices in Device Manager and have no way of knowing what they are.
  They would normally be a problem for me except that I'm also the sounds of disconnecting USB every now and then and caveats relating to the devices being plugged into a port USB2 not high speed.

  I have of course plugged anything in time so I expect there is a device which is malfunctioning and not detected correctly.

  The devices I first suspected (webcam, TV Tuner, touchpad) all normally appear in Device Manager so I'm at a loss as to what is the cause.

  Any ideas?
  Beards

  Hello

  I understand this correctly?

  You restored the A500 to the factory settings using the Toshiba recovery procedure and the unknown devices still shows up in the Device Manager?

  That s strange because the recovery disk to put the laptop in the same State as on the first day of purchase. So generally unknown devices should not appear and all drivers must be installed correctly.

  However, I found an interesting and in my eyes useful HowTo document that should help you to know which drivers are missing in your case.

  + How to identify an unknown device (e.g. LAN wireless module)? +
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

• Problem: The device is not cleared

  Dear Sirs,

  I had a problem when take the link online and it has refused to give an online interface device.

  One of my devices, what is Rosemount TT0644, is always shown "NIF_ERR_DEVICE_NOT-CLEARED" in the shot:

  

  So, I'm trying to find if there are some settings to refuse my changes to the unit.

  I put "Not locked" in WRITE_LOOK of the resource pack.

  

  Unfortunately, it seems not to be the right way to solve the problem because my change of tag still does not work.

  She seems to be the same error.

  

  Is there someone to help me? Thank you very much.

  Hi aarontseng,

  1. are you able to download a program (with only its own FB) in the device in question with the clear option of devices (the download Configuration)?

  2. Please check if the SD profile you have selected is correct.

• Problem Win7: Device driver (* .inf) within the distribution is not installed in setup.exe. Why?

  Hi people,

  We have a device driver (* .inf) to our application that is added to our distribution , we create in CVI. In the past we did copy the *.inf in the /dossier inf directly (using the distribution Installer "files"-Tab "").

  Recently, we have followed the guidelines described in "Using LabWindows/CVI to install your device .inf files.

  So we have now chosen a significant subdirectory of our application as the destination folder for the file *.inf instead of directly copy in the system directory.

  Everything works well (besides the fact that our driver has no signature and needs user interaction), while using Windows XP.

  DIFxApp (run MsiProcessDrivers) recognizes the *.inf file and installs the device driver.

  After completing successfully the setup.exe, the specified *.inf has been duplicated as oem*.inf/pnf under /INF.

  But under Windows 7 the *.inf is not installed. I ran "setup.exe/l * v" for the information of the installation log file.

  And I found this article:

  MSI (s) (8:9 C) [13:56:41:043]: jumping action: MsiProcessDrivers (the condition is false)
  Of course the step of installing the drivers is ignored.

  Choose the /INF in the folder target to the *.inf (which does not work on Windows XP) everything works fine.

  Does anyone know why MsiProcessDrives is ignored in Windows 7? It is always ignored or I do something wrong?

  Help is appreciated!

  Thank you!

  Philipp

  PS. : The device driver *.inf was written for several OS (XP, Vista, Win7) target according to Microsoft guidelines for this. So it of a universal *.inf file and can be used in each operating system from XP to Win7.

  Good,

  I solved the problem myself.

  The problem is related to the DIFxApp.dll , which is available as 32-bit and 64-bit version.

  In my case, I created the distribution as the 32-bit version. That's why 32-Bit DIFxApp.dll is merged into the MSI file that is not compatible with Windows 7 (64-bit).

  This is why NOR added to this CustomAction Condition (NOT VersionNT64) for MsiProcessDrivers, which is perfectly adapted to the species but of by not having is not the *.inf file

  installed in Win7. I guess the distribution building like Release64 it will use the 64-bit Version of DIFxApp.dll. I'm not able to verify that (still works on XP).

  But then it will probably crash on XP.

  But anyway. We have a distribution for the two BONES.

  Quick & dirty solution I figured out:

  -Edit-> files distribution: Add the *.inf file to C:\window\inf

  -Manually add VersionNt64 condition in the resulting MSI file under component -> (you can use the ORCA editor for this)

  So now, in the case of XP, the *.inf file gets installed by DIFxApp.dll.

  Windows 7 using the *.inf is copied directly in the windows/inf folder and installs automatically the first time that the device is connected.

  I guess you can merge DIFxApp.dll (32 bit) and DIFxApp.dll (64-bit) to the MSI and manage things together, create conditions. But it is not quickly implemented. At least for me is not...

  Regards Philipp

• USB problem-"USB device not recognized".

  Original title: USB problem

  I have a problem when I connect my nokia mobile to my pc via USB cable there is a display of msg of error "USB device not recognized.how to solve this problem? I tried all reboot pc, reconnect the device, format XP and reinstall.last night I was using a mobile navigation correctly with the same device same system same cable.i have tried driver re install but not fixed yet.i have Windows XP 3 intel p4.please help.

  Hello

  1. Are you having the same problem if you connect a drive flash or any other device?
  2. Have you tried plugging in Nokia mobile on another computer?
  3. Have you tried plugging it into different USB ports?

  I suggest you send more information to help you better.

  You can also refer to:

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive.

  http://support.Microsoft.com/kb/925196

  USB port may stop working after you remove or insert a USB device.

  http://support.Microsoft.com/kb/817900

  .

• How to fix a sound problem - reading devices no. for the Device Manager on WinXP SP3?

  (1) I can't to Device Manager by following the guide for help on my system.  The steps do not match what is actually showing me my Windows and I can not here the only way I can get to it is to use a link on the help page directly.  Even when I do that, the steps in the help guide still do not match what I see on MY screen.  Is this perhaps an update of this Guide to match my system?

  (2) I need Device Manager to find out what happened on my Audio device.  I have no sound from my speakers.  It happened all of a sudden when my wife was using the computer.  I don't know what she can do both.

  Start/Settings/Control Panel / sounds and Audio Devices Properties shows "No. Audio Device", hence "Volume of the device" is gray.  Audio tab displays 'No peripheral to read '.

  The fastest way to bring up the Device Manager is:
  Start-> Run-> "devmgmt.msc".
  If it detects the sound equipment, but there is a problem with a driver, you will probably see a yellow "!" appears by your audio device.

  If he was working and stopped, you can try to perform a "System Restore" to a point where it worked:

  "How to restore Windows XP to a previous state"
    <>http://support.Microsoft.com/kb/306084 >

  HTH,
  JW

• Problems of device driver install CP1525nw

  have Windows Vista 64-bit and recently had to change wireless networks. Now I can't print to CP1525nw. I have tried to re-install/re-connect using the cd provided with the hardware, and more download drivers/software of hp/support (Basic or complete versions). The installation does not complete. Error message only I get is check the hp site for updated device drivers. No idea what I'm doing wrong. Camera works fine when connected with cable on my other computer (which has also changed with wireless networks).

  Specifically, the error message reads:
  "Windows encountered a problem installing the software driver for your device...". "The an installer for this device cannot perform the installation at this time", then I went on hp website.

  At a loss.

  Advice appreciated here.

  Hi oaklander,.

  Fatal error message

  Restore factory settings

• Pavillion DV6 1030US: another problem of devices

  Hi, my problem with other devices is as follows:

  Network controller?

  Acquisition of ICP data and Signal Processing controller?

  SM Bus controller?

  Unknown device?

  Unknown device?

  I have installed the pilot identifier in the computer but when run it tries to go to the internet and I don't have access to the internet on this computer, he sees not either other computers on the local network

  Hello:

  You must install the driver for smbus controller chipset and PCI Data Acquisition and Signal Processing controller.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=20019&lang=eng&ProdId=816

  You need this driver for network controller.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75896-2&cc=us&DLC=en&LC=en&OS=2093&product=3860542&sw_lang=

  For unknown devices, I will need the hardware ID of them...

  Go to Device Manager and click on the unknown device need drivers.

  Click on the Details tab in the upper part of the device window unknown.

  Now, you see a drop-down list of property and it is set by default to the Description of the unit.

  On this list and select the second element (Hardware ID).

  After the first string of characters you see in the window, so I can understand what the device is.

• Alpha C dev problem - alpha device blackberry 10 dev program is over...

  I got this message after I upgraded to the latest firmware and now it won't go away, even after a reboot. Also tried to re - load the firmware, but no luck.

  Help, please.

  

  Update on this problem:

  My problem has been resolved, but it took a replacement of the device to solve.

  I'll be shipping the defective unit to BB, so I hope they can figure out what went wrong and prevent other developers.