error message received A12E5 when buying LR and PS CC.  What should I do next?

error message received A12E5 when buying LR and PS CC.  What should I do next?

Advertisement

Hello

Please see A12E5 error installing Adobe Creative product cloud

Hope that helps!

Kind regards

Sheena

Tags: Adobe

Similar Questions

  • I just bought Windows 7 upgrade Windows Vista. I get the error message: operation is not supported on this platform. What should I do to get this latest version in my computer?

    The upgrade from Vista to Windows 7

    I just bought Windows 7 upgrade Windows Vista. I get the error message: operation is not supported on this platform. What should I do to get this latest version in my computer?

    Have you tried to do an upgrade installation or a custom installation?  A custom installation requires you to back up your files and settings with Windows Easy Transfer and then reinstall everything after installing the new.  If an update install does not install work, you need to do a custom.

    In addition, a Windows 7 Anytime Upgrade will not work and you get a message from a platform if you have bought a UA and tried to use it with Vista.  Vista upgrade requires a detail, a copy in the Windows 7 box.

  • I tried to do a backup on a disk (a flash drive to be exact) on my computer and im getting the error message "demand is not supported load 0 x 80070032" what should I do? I have

    I went into the backup from the control panel and its saying that no replacement has been set up... I tried several times, just to be sure that I had set up the backup on my computer before and it worked very well, I don't know what else to do... help

    Hello
    All changes made to the computer before the show?
    Method 1:
    Run the tool on your computer system file checker. You can check the link that will give you information on how to use the System File Checker tool to fix system files missing or corrupted on Windows Vista or Windows 7 below:
    http://support.Microsoft.com/kb/929833

    Method 2:
    Run a check disk on the computer. Follow the steps.
    1. Select command prompt.
    2. type chkdsk/r (note: there is a space after chkdsk)
    3. restart the computer and allow to run the disk check.

    Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost

  • When I try to activate it with my old key that I got it comes up with an error message saying its an upgrade key and will not work.

    Original title: installation problem windows

    I recently had to reinstall windows for my pc that my HARD drive is dead and when I try to activate it with my old key that I got it comes up with an error message saying its an upgrade key and will not work. Ive phone microsoft and they say, I have to buy a basic disk and then upgrade with the disk that has always worked for me? any suggestions?

    License upgrade and the key that's exactly right, used to upgrade a previous version (Vista, XP) for the version shown on the license (7).

    In order to use this key, you need to pre-install your o/s original eligible before moving to 7.

  • I get this error message 'The URL is not valid and cannot be loaded' when I try to go to Firefox home. I uninstalled the modules, uninstaleed and reinstalled a new fresh firefox which did not help

    I get the following error message 'The URL is not valid and cannot be loaded' when I try to go to firefox home. I uninstalled modules, uninstalled Firefox and then install a new version. Still have the problem.
    Thanks for the help

    This problem may be caused by a corrupt installation of Visual C++ or incomplete (several versions can be installed-by-side; SxS) it lacks certain runtime components (redistributable Packages), which depends on Firefox (problem with an embedded manifest file that specifies a specific runtime version).

    You need to install the missing components (for example, Redistrbutable end 2005 ++).

    • bug 713167 - Microsoft.VC80.CRT SideBySide errors, browsercomps.dll
  • 0x000000F4 beginning physical memory dump, this is the error message I got when I perform the adaptation of data operation or run heavy programs, and when I play the music of his tempo becomes slower.

    Original title: 0x000000f4 beginning physical memory dump

    STOP: 0x000000f4 (0 x 00000003, 0x89cb3a18, 0x89cb3b8c, 0x805d29b4) beginning physical memory dump

    This is the error message I got when I perform the adaptation of data operation or run heavy programs, and when I play the music of his tempo becomes slower... What do I do? Help, please...

    Hello

    You did changes to the computer before this problem?

    Step 1: Check if the problem persists in the clean boot state.

    From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

    Reference:
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
    1. click on start and then click Run.
    2. type msconfig and click OK.

    The System Configuration Utility dialog box appears.

    3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
    4. When prompted, click on restart to restart the computer.

    Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

    Reference:
    Using the event viewer
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

    Understanding of event viewer
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

    Procedure to view and manage event logs in Event Viewer in Windows XP
    http://support.Microsoft.com/kb/308427

  • I use Windows Live Mail and when I access the contacts screen I get an error message "Not responding" when I try to access anything whatsoever.

    I use Windows Live Mail and when I access the contacts screen I get an error message "Not responding" when I try to access anything whatsoever.

    Hello Brenda,.

    The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

     

    Windows Live Mail

    Windows Live Hotmail

    Windows Live Messenger

    Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

  • I get an error message of complete storage - please backup and remove your something online (can not see the full error message) when converting PDF reader to point rower inacrobat DC. Help, please

    I get an error message of complete storage - please backup and remove your something online (can not see the full error message) when converting PDF reader to point rower inacrobat DC. Help, please

    Hi debg25514049,

    You will not be able to export your PDF to PPT using the service Adobe export in PDF format.

    You'll need subscription to pack Adobe PDF or the Acrobat application to convert PDF to PPT.

    Kind regards
    Nicos

  • Various recurring error messages blue box when the laptop is idle

    I have a new (10 months) HP Pavilion dv7 - 3165dx running windows 7 home premium 64-bit.  After that laptop sitting idle for a while, the screen goes black with a blue box error message.

    01/02/11-02/14/11

    Error message: A problem has been detected and windows has shut down to prevent damage to your computer.

    If this is the first time you've seen this stop error screen, restart your computer.  If this screen appears again follow these steps:

    Disable or uninstall any antivirus, commercial defragmentation or disk backup.  Check the configuration of the disk hard yoru and check the updated drivers.  Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

    Call Technical Support HP - a talked to Josh: I was sent to HP.com support site to download software downloads and the pilot.  Said it is known the problem and had me run the CHKDSK command to automatically solve problems.

    02/16/11

    Error message: A problem has been detected and windows has shut down to prevent damage to your computer.

    If this is the first time you've seen this stop error screen, restart your computer.  If this screen appears again follow these steps:

    Make sure you have enough disk space.  If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates.  Try changing video cards.

    Check with your hardware vendor for updates to the BIOS.  Disable the BIOS memory options such as implementing caching or shading.  If you need to use safe mode or remove or disable components, restart your computer, press F to select the advance boot option, and then select Safe mode.

    Technical information:

    Stop: OX0000007E (OXFFFFFF800032D3905, OXFFFFF88002B97288, OXFFFFFFFFC0000005, OXFFFFF88002B96AFO)

    Data collection for the crashdump...

    Call the HP Technical Support - talking to Matt: check space drive, and said that it was very good.  Updated graphics driver.  Disabled the hard drive protection.  Power options reset of Hibernate to standby mode.  Update BIOS of F.10 F.15.  Ran test drive: Smart check, DST short and long DST all spent.

    02/17/11

    Error message: A problem has been detected and windows has shut down to prevent damage to your computer.

    System_Service_Exception

    If this is the first time you've seen this stop error screen, restart your computer.  If this screen appears again follow these steps:

    Check to make sure any new hardware or software is installed correctly. If it is a new installation, ask your hardware manufacturer or software, the windows updates, you might need.

    If problems continue, disable or remove any newly installed hardware or software.  Disable the BIOS memory options such as implementing caching or shading.  If you need to use safe mode or remove or disable components, restart your computer, press F to select the advance boot option, and then select Safe mode.

    Technical information:

    Stop: OX0000003B (...)

    Data collection for the crashdump...

    I don't ' know what to do at this point.  HP phone support seems unable to solve my problem.  Can someone help me?

    Hi DP - K,.

    Thank you for all the helpful tips.  This weekend when I saw my McAFee scan/security reports, even if the McAfee Security Center shows that viruses and spyware works, he did not run a weekly full scan on my laptop since the end of January.  I don't know if he tried to scan and then breaks down, or it will not start.  When I tried to run a manual scan, windows shut down and I got a blue screen error message after about 5 hours of scanning - 63% digital.  When I ran the HP System Diagnostics report, it showed that my Security Center has not recorded an antivirus product.  "The Security Center cannot identify a current antivirus application.  There is no product protection antivirus installed or it is not recognized. "When I ran the HP reliability and history of problem report, it showed that my error messages started on 01/02/11, which is what I remembered.  I was able to restore my laptop to 23/01/11 when I had no problems and then, I uninstalled McAfee security and re-installed software.  I manually ran a full scan and it took 5 hours to complete, it has completed and reported no problems.  I look today and so far, no problem.  If the problem happens again, I will try the suggestion of Avast below.   Thanks again for all your great suggestions.

  • I got the error message "Spooler subsystem app stopped working and was closed".

    I got the error message "Spooler subsystem app stopped working and was closed" when I tried to print a large PDF file.  I can not load a printer now.  What is the next step?

    Hello

    You should probably check with Support from Adobe and their communities and Forums in case
    There are known problems.

    Adobe - Support
    http://www.Adobe.com/support/

    Adobe - communities
    http://www.Adobe.com/communities/

    Adobe - Forums
    http://forums.Adobe.com/index.jspa

    ====================================

    Check with the printer manufacturer for updated drivers and support for known issues.

    Check chan seen message here - one of the highest.

    fixed spooler subsystem app stopped working
    http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

    ===================================

    If the above didn't help:

    Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
    the latest driver).

    Check Mr. Fixits here and if you use the other methods go back and try again later.

    Problems of print and error - a Mr Fixit of printing
    http://support.Microsoft.com/GP/printing_problems

    Solve printer problems - a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

    ------------------------------------------------------
    Logon as administrator

    Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

    You can copy and paste each line except those brackets and press ENTER after each.

    net stop Spooler

    (echo suppression of all print jobs)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    del/q %SystemRoot%\system32\spool\printers\*.*

    net start Spooler

    (sound Done!)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    Another way
    http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

    Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
    http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

    If you use Control Panel - Classic - printers

    Try after unplugging your printer if necessary.
    -------------------------------------------------------------

    Also check the spooler print and its dependencies and addictions Service.

    The value of all Services back to their default values.

    Start - type into the search box-> Services find top - make a right click on - RUN
    AS AN ADMINISTRATOR

    BlackViper - for Vista SP1 - Services - all return to their default values.
    http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

    BlackViper - for Vista SP2 - Services - all return to their default values.
    http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

    How difficulty Windows Vista print spooler starts do not
    http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

    ------------------------------------------------------------

    Check this thread if necessary - to stop and erase the spooler

    http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

    and here
    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

    ------------------------------------------------------
    Clean the General corruption and repair or replace the damaged/missing files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    CheckDisk (chkdsk) runs at startup.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • video card error message, "nvlddmkm.sys has stopped responding and has recovered."

    My computer has an nvidia 9800 gt. Since then, a week ago that I am unable to play a video game, or use windows media center. If I ever start a video game or windows media center the program crashes and I get the error message, "nvlddmkm.sys has stopped responding and has recovered." A few times, I get a message from the blue screen and the computer needs to restart. I reinstalled the drivers and even restored software from my computer to the original factory condition. A year ago I noticed my computer screen would get dark, as if I was wearing sunglasses. I want to restart my computer and the screen would be normal again. I was wondering if my video card burned to some, and if I need a new video card. The average temperature of my videocard 76 degrees Celsius, is 167 degrees Fahrenheit.

    Hello

    The best sources of information would be Nvidia Support, their documentation online and their
    forums. Try to remove ANY power and reseating the cables (both ends, memory and cards
    When possible) - in fact, remove and replace - do not just tight. Clean the dust bunnies
    and vents. Make sure that the internal fans are working and trying to use a small fan to blow
    directly into the inlet to see if that helps.

    NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
    http://www.nvidia.com/download/index.aspx?lang=en-us

    NVIDIA Support - check with the support that she might be a known issue
    http://www.nvidia.com/page/support.html

    NVIDIA forums - also check for the forums it might be a known issue or others likely to have
    http://forums.nvidia.com/

    ==============================================================

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • WAP Error Message received invalid key EAPOL MIC (msg 2/4)

    Hello

    can someone help me with this error message received invalid key EAPOL MIC (msg 2/4).

    Timestamp Gravity Service Description
    November 5, 2012 15:11:27 warn hostapd [4365] Received invalid key EAPOL MIC (msg 2/4)

    Only, I get this message of a device when connecting to the WIFI network.

    This only happens from time to time. Sometimes it connects without any problems.

    Appriciate any help.

    Sincerely

    Patrik

    This is an error when the STA (the computer) built the package. 2/4 is to indicate the negotiation process where it sends a value for single use with his own microphone. A microphone is a verification of the integrity of the messages (or code).

    Basically, this error is said, everything that this computer is sending is not valid. You can try to make the AP behave differently as force the use of side effects instead of TKIP + AES depending on which product you have. About removing 'mixed' wireless network. As example, try using WPA2 (AES) only.

    These errors are more frequent with TKIP, since it is the nature of TKIP to send one key per package.

    -Tom
    Please evaluate the useful messages

  • Get the error message: "driver software was installed correctly" and failed to get the Samsung Galaxy S to connect to my computer.

    Original title: Samsung Galaxy S

    Cannot connect Samsung galaxy s to computer says software driver has not been installed successfully

    Original title: UBS connection I can't get my samsung galaxy s to connect to my computer, it keeps giving me an error message that says the driver software was not successfully installed

    Previous page Next Page

    Hi Jeehadave,

    1 have you tried the steps by Sandeep GNT replied on March 13, 2013?

    2. you receive the specific error codes with the message?

    Usually after installing the Samsung Kies software, you will be able to connect the Samsung Galaxy with Windows.

    Samsung provides the Kies software to communicate with Windows.

    You can try to connect to another USB port and check if it helps.

    If the problem persists even after installing the Samsung's Kies software, then you must get in touch with support from Samsung to get help.

    Hope the helps of information.

  • When I try to batch photos to resize in Scripts &gt; Image Processor function, an error message that says: "comand"Pen"is not available. What can I do to fix this?

    When I try to batch photos to resize in Scripts > Image Processor function, an error message that says: "comand"Pen"is not available. What can I do to fix this?

    Yes Adobe tile action fails with the error when he didn't is not the active selection. Note that the Cut Out, built-in frame and thumbnail (selection) after their name. These actions require an active selection to the selected mobile dotted lines before using the action.  Action seeks to soften the selection that were provided to you.  There was no selection, so there is nothing to be flag.

    In addition, the step of the pen in the action of the tile is an interactive step on its dialog box is.  An interactive action defeat as the design of the Image Processor script commands.  Isn't interactivity in a batch.

  • I want to activate Acrobat Pro 9 serial key and get message that are 2 active activations. We're old computer with problematic material and other is the same pc that I didn't turn off the license and reformatted. What should do?

    I want to activate Acrobat Pro 9 serial key and get message that are 2 active activations. We're old computer with problematic material and other is the same pc that I didn't turn off the license and reformatted. What should do?

    I didn't know, I had to disable before turning back, but now I don't have this option. Is there a way to disable these two licenses and activate again the good?

    Hi vasilisp36877173 ,

    Please see these items:- Learn how to enable or disable Adobe applications

    Solve the problems of activation and deactivation of Adobe and error messages

    Let me know how it goes.

    Kind regards

    Christian

Maybe you are looking for

  • envy K220 nr: beats audio for windows 10

    After you have installed windows 10, beats audion is not entirely worked. Beats audio is present, but I can't enjoy the sound as it was before installin windows 10. It was working fine when newly purchased and windows 8 built in already. I installed

  • Satellite P750-11W - external mouse buttons is unresponsive

    Hello When I try to connect my USB optical mouse to the laptop, even if it seems to be detected without problem, it does not work properly: the buttons are unresponsive and it moves ramdomly. It blocks even my mousepad (sometimes). My OS is Windows 7

  • Satellite L755 resets on battery

    Hello I bought a laptop Toshiba L755 and after 2 weeks, he suffered a problem whereby on battery it would just restart. He would randomly and while idle/very little use. I returned it to Comet requesting a refund, but they have dropped and gave me a

  • mounted the new motherboard, the habit now XP re activate, message implies that it is a pirated copy.

    I re loaded XP SP1 and receipt message to say that I had 30 days to activate, so I better download SP3 first. Worked well. Tried to activate it and got the implicit message that the copy of XP has been hacked. Run the real software diagnoses and the

  • Compact file PS3 to Z3 transfer

    Hi guys I have connected my Z3 to my PS3 via USB and managed to transfer Mp3 files on my storage card. I can also access the files transferred via the PS3 to my phone too. However, I can't for the life of me get the Mp3 files directly on my phone. Am


HashFlare