Get the error message: "driver software was installed correctly" and failed to get the Samsung Galaxy S to connect to my computer.
Original title: Samsung Galaxy S
Cannot connect Samsung galaxy s to computer says software driver has not been installed successfully
Original title: UBS connection I can't get my samsung galaxy s to connect to my computer, it keeps giving me an error message that says the driver software was not successfully installed
Previous page Next Page
Hi Jeehadave,
1 have you tried the steps by Sandeep GNT replied on March 13, 2013?
2. you receive the specific error codes with the message?
Usually after installing the Samsung Kies software, you will be able to connect the Samsung Galaxy with Windows.
Samsung provides the Kies software to communicate with Windows.
You can try to connect to another USB port and check if it helps.
If the problem persists even after installing the Samsung's Kies software, then you must get in touch with support from Samsung to get help.
Hope the helps of information.
Tags: Windows
Similar Questions
-
Error message: "iTunes is not installed correctly. Please reinstall iTunes.
Original title: program program program App Kompatibilitet Spel Spel Aldre Krasch Kraschar upp sig sig Hanger Hanger
I get this message: "iTunes is not installed correctly. Please reinstall iTunes.
' Error 7 (windows error 5) "when I try to run iTunes.
No matter how many times I reinstall the program nets.Trying to download iTunes again, but instead run the installer from its current location, try saving it to your hard drive and then run the configuration file.
Problem installing iTunes or QuickTime for Windows
http://support.Apple.com/kb/ht1926iTunes for Windows Vista or Windows 7: troubleshooting...
http://support.Apple.com/kb/ts1717You can try both uninstalling and reinstalling as a new user to see if that helps:
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-accountIf this isn't the case, I recommend you contact Apple for assistance.
-
Software device driver has not been installed successfully. Please consult the manufacturer of your device to help get this device installed.
Failed. Generic USB hub. I went to the Device Manager and clicked on update, but it did not work. Can you help me.
original title: DEVICE DRIVER has NOT been INSTALLED successfully.
Go to your computer manufacturer's support web site and search for the Windows Vista drivers for your specific model number.
If there are drivers Windows Vista, then to download to a folder on your hard drive and install all of them, in starting with the card mother/chipset drivers SATA, LAN, Audio, USB, Etc., and so on.
List of computer manufacturer support sites:
http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturersIf you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu
Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problemsGraphics/video drivers:
Check the download site of the manufacture of the graphics card for the latest Windows 7 / Vista drivers for your card.
ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-usJ W Stuart: http://www.pagestart.com
-
Original title: iTunes
I had iTunes running on Thursday passed on W8.1. When he downloaded the last version I received the message: iTunes not properly installed Error7 (Windows error 1114) with: rubtime Library Microsoft end ++. Run-time error. Program: C:\Program Files (X 86) \iTunes\iTunes exe. R6034 An application has made an attempt to load the C runtime incorrectly library. Support team of enforcement contact for more information. When I'm on it 1 time iI uninstalled & reinstalled. Same message.
Always looking for help. I tried various suggestions does not.
The answer on Apple Support that solved this for others said:
"
Go to control panel > add or remove programs (Win XP) or programs and features (latest)
Remove all these elements in the following order:
- iTunes
- Apple Software Update
- Apple Mobile Device Support (if this will not uninstall press on)
- Hello
- Apple application support
Restart, download iTunes and then reinstall, or under an account with administrator rights, or right click on the downloaded Setup program and selecting 'run as administrator '.
See also HT1925: removing and reinstalling iTunes for Windows XP or HT1923: removing and reinstalling iTunes for Windows Vista, Windows 7 or Windows 8. Some users must follow all the steps in the appropriate support document which includes a few deletions additional manual file and folder not listed above"
You perform all of these steps? I see that you posted in this forum. You really need to post here.
__________________________________________________________________________________________________
BarbMVP Windows Entertainment and connected home
My Blog - http://digitalmediaphile.com/
Connected world Blog Reader Windows 8 App Barb-
http://apps.Microsoft.com/Windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461C-b1d5-06e54a58d298Windows and Surface drive Windows 8 App community
http://apps.Microsoft.com/Windows/en-us/app/Windows-and-surface-community/0abb150e-D287-47d4-837E-9fa51f485ad7Please mark as answer if that answers your question
-
How can you diagnose errors in Device Manager
Tried installing McAffee, but error message. Contacted McAfee... says the problem is in the Device Manager. How can I determine the error in Device Manager?
Are you sure you don't have another Antivirus always installed; even an expired subscription?
A lot of AVs will not install if they find one already installed (and you must have an AV installed in any case).
Another problem may be how you try to install it:
You need to download and save on the desktop > then right click on the saved files > select run as administrator.
FYI: Here's how to look in the Device Manager:
http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager
See you soon.
-
MDR-ZX750BN - device driver software was not successfully installed
Here my problem, I go to my bluetooth to add a device I turn my headset on "MDR-ZX750BN" it detects and so I add it starts to install the device drivers but then and I encounter the message "device driver software was installed correctly. Now, I tried to man to try and fix this problem, so I hope someone here can help know me fix the. I think it has something to do with the drivers not being do not or are not planned to install the good. I just need to know how to fix it. I'll be very grateful to anyone who can help me with this problem. Thank you.
Hello Eric,
Thanks for posting your query on Microsoft Community forum.
When you connect a new device to your computer, Windows tries to install it for you automatically, and will notify you if a driver for the device is not found. There are several things you can try if this happens:
I suggest you try the steps in the following article.
What to do when a device is not installed correctly
Get back to us with the result of the steps so that we can help you further.
Kind regards.
-
Original title: I need the Windows Media Player for WinXP 32 bit.
Recently when I tried to play an Audio CD using Media Player, I get the following message: "the file wmp.dll has a version number of 11.0.5721.5280 where 11.0.5721.5268 was expected. Windows Media Player is not installed correctly and must be reinstalled. You want to install the player from the Microsoft website? "When I clicked 'Yes', the window get Window Media Player appeared that lists the different versions of the operating system Windows however, in the category Windows XP, only the 64-bit version has been registered and I need the Windows XP 32-bit version. Anyone know where I can get the 32 bit version?
Hi donsor,
You did it of any material changes or software on the computer before this problem?
You can follow this link & check if the problem persists.
After the WMP update you an error of wmploc.dll on version number incorrect
Reference: Windows Media Player is not properly installed and needs to be reinstalledHope the helps of information.
Please post back and we do know. -
* Original title: does not always
There is a windows 8 there, but I'm trying to download it right now and a red Tin can that appear when it comes to the end and when I click on continue anyway, it restarts just install it?
Just at the moment where I thought that he had finally worked as he said completing the installation to have fun and enjoy, when I click on finish, that's what I get on my screen "device driver software was not properly installed" the with next to "Microsoft LifeCam HD-3000", he says has failed. ". The LifeCam shortcut on my desktop now will not open.
Hi Rachel,
Thank you for your response.
I suggest you to contact the Microsoft Hardware support for assistance on this issue.
http://www.Microsoft.com/hardware/en-CA/support/contact-us
It will be useful.
-
I use Photoshop Cs5 on a PC that has been installed by the manufacturer of my PC in 2011, I tried to use it yesterday, and I get an error message saying to re - install the program. I have no knowledge on how to help.
Hello
Please access "' programs and features'" and uninstall the Photoshop CS5 and access the link as follows to download the program installation of Photoshop CS5 and re - install and activate it with the serial key you have.
Download Adobe Creative Suite 5 products
Thank you.
-
Original title: driver error
They just showed me an error on my computer. I am currently running Windows 8. I was in the middle of games on Steam and my computer randomly gave me a blue screen. He told me that "DRIVER IRQL NOT LESS OR EQUAL (Wdf01000.sys). It restarted and now I'm on that's fine, but I was wondering if there is anything I can do to prevent and what should I do to remove if it's going to be a recurring problem. Thank you.
Here is a list of the help page instructions:«' ' ' Exact error message: DRIVER IRQL NOT LESS OR EQUAL (Wdf01000.sys)»»» "-Your program and Version: don't know what to put here.-Your operating system and Version Windows 8-Your browser and the Version of Google Chrome Version 28.0.1500.72 m-All soft/hardware you have recently installed or removed - None.-Any recent changes that have been made to the system - None.-What you did to solve the problem of Google there as the error message recommended, read a few results, thought I would ask here.Specification of the computer if necessary:HP - Sleekbook 15.6 ENVY "AMD - processor A10-DDR3 SDRAMWe need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.If you are overclocking stop. (chances are if you are unsure if you are, you are not) aTo allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".The procedure:* Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.* Zip up the copy (compress)* Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.Link to find out how to download below.To ensure the minidumps are enabled:* Click Start, in the search box, type: sysdm.cpl, press ENTER.* On the Advanced tab, click Startup and recovery... Settings button.* Make sure that automatically restart is unchecked.* Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).* Ensure to that small Dump Directory is listed as % systemroot%\Minidump.* OK your way out.* Reboot if changes have been made.Please also run MSinfo32 and download the output as well.To run MSinfo32 please go to start > run > MSinfo32Go to 'file', 'save' and download the PDF is saved with the DMPSystem specs are extremely useful then please include everything you know.
Blue screen view and that crashed are often wrong and should only be used in case of emergency...
You can learn more about BSOD here
Team Zigzag3143.com -
The LifeCam Cinema hardware installation error
Tried to install Lifecam Cinema 3.0 but keep on receiving an error message "Required line was not found in the INF" - OS is Vista Home premium editionLifeCam installed on my laptop XP
Hi seuss460,
LifeCam software version 3.2 is available; Make sure you install the correct software for your hardware.
You can download software LifeCam here
Step 1: You can follow the steps mentioned in the article below
Troubleshoot installation of Intellipoint and IntelliType LifeCam software
http://support.Microsoft.com/kb/953691
Step 2: See also the steps mentioned in the article below
Troubleshoot failures to find the new LifeCam hardware
http://support.Microsoft.com/kb/929087
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I got the error message "Spooler subsystem app stopped working and was closed".
I got the error message "Spooler subsystem app stopped working and was closed" when I tried to print a large PDF file. I can not load a printer now. What is the next step?
Hello
You should probably check with Support from Adobe and their communities and Forums in case
There are known problems.Adobe - Support
http://www.Adobe.com/support/Adobe - communities
http://www.Adobe.com/communities/Adobe - Forums
http://forums.Adobe.com/index.jspa====================================
Check with the printer manufacturer for updated drivers and support for known issues.
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
The value of all Services back to their default values.
Start - type into the search box-> Services find top - make a right click on - RUN
AS AN ADMINISTRATORBlackViper - for Vista SP1 - Services - all return to their default values.
http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020BlackViper - for Vista SP2 - Services - all return to their default values.
http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991How difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
When turning on my computer always error message "drive: c / on the Neurofibrillaire degeneration and is currupted.
suggest how to check the disc I have to press a key before 6 second, try that, but nothing is coming.How can I solve this problem?
http://www.Vistax64.com/tutorials/130824-CHKDSK-will-not-run-startup-Vista.html
See if help above.
See you soon.
Mick Murphy - Microsoft partner
-
I need to reload of Photoshop CS4 and I get the error: "License has stopped working" error message 6. -What this means and how can I solve this problem?
Hello
Please see error: "License has stopped working". Windows or error: "License has stopped working". Mac OS depending on the operating system you have.
Hope that helps!
Kind regards
Sheena
-
I get an error message of complete storage - please backup and remove your something online (can not see the full error message) when converting PDF reader to point rower inacrobat DC. Help, please
Hi debg25514049,
You will not be able to export your PDF to PPT using the service Adobe export in PDF format.
You'll need subscription to pack Adobe PDF or the Acrobat application to convert PDF to PPT.
Kind regards
Nicos
Maybe you are looking for
-
Hi, I had a few problem is my iPhone can not activat, someone else you have same problem like me?
-
Dual boot win7 and XP pro on Pavilion dv7-3079wm (need drivers SATA for XP)
my machine features: model: dv7-3079wm Product number: VM241UA #ABA product name: pavilion dv7 hardware ID: PCI\VEN_1002 & DEV_4391 & SUBSYS_363A103C & REV_00 PCI\VEN_1002 & DEV_4391 & SUBSYS_363A103C Pocessor AMD Turion II Dual-Core Mobile Ultra M60
-
Error when trying to install LabVIEW2009 on my computer (windows XP 32-bit)
When you try to install LabVIEW2009 on my computer (windows XP 32-bit) I get the following error: the instruction at "0x005466a9" referenced memory at "0x00000000". The memory could not be "read". Someone has any ideas why this is error message appe
-
A2109 kernel/Bootloader lock?
Guten Tag, der ist the win Gerates Bootloader? Trotzdem, dass ich "fastboot oem unlock" lasst sich kein others submarines. ZB: 'fastboot boot boot.img ". Die boot.img - Datei contains den core standing auf basis von den Ruhreier Kernelquellen und der
-
Windows Defrag... Lose 100 MB to 3 GB of DISK space each time
As the title implies each time disk i run defrag I lose disk space available... I redid vista already and which resolves nothing im really confused and would love to have that problem. If anyone has any ideas it would be great... TYVMRavernomina.