Error message "Unable to access screen saver.

Similar Questions

• Error message: "unable to access your Valet."

  Whenever I try to open Cisco Connect, it still shows the error message: "unable to access your Valet. You can access your Valet settings when you are connected to your Valet. "However, I'M connected to it. In the center network and sharing in Windows Vista, it shows that I am connected. I tried to disconnect/reconnect and even restarted the computer. Easy setup key will do no good because it is not updated. All this happened after I tried to change the router password. He did cut my internet connection and to say 'we encountered an error. If anyone has a solution to this, that would be nice. Also, I would like the address for the Web-based utility change the settings of the router if I can not ultimately only Cisco Connect works.

  Also, I apologize if this is in the wrong section of the forum.

  OK, I fixed it. I have reset the router to the factory settings. Once again, thank you John for trying to help me, I really appreciate it

• Windows 8 error message - unable to access Microsoft Store

  This week, I bought a new Lenovo Yoga 2 Laptop with windows 8

  When you click the store icon, you get an error message "your PC is not connected to the Internet. To use the store, connect to the Internet and then try again.

  Hello Scott,

  Thanks for posting your question on the Microsoft Forum.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. You receive an error message when you try to connect to the Windows store?
  2. Do you use a proxy connection to connect to the internet?
  3. What is the security software installed on the computer?

  Please follow the troubleshooting procedures below.

  Method 1:

  Step 1:

  Please go to the link below, download the file and run it.

  Run applications troubleshooting

  Download and run the troubleshooter modern UI App.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Step 2:

  I suggest to go through the link and follow the given procedure. Here is the link for your reference.

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-GB/Windows-8/what-troubleshoot-problems-app

  After the execution of the method 1 try to open applications to be updated.

  Method 2

  If the problem persists I suggest you to try the steps mentioned below and see if it works for you.

   

  Step 1

  Make sure that the (UAC) user account control is enabled.

  Press the Windows key and from the splash screen, type "UAC" and on the right, select settings.
  Select change user account control settings and check here.

   

  Step 2

  Check the Date & time zone is correct:

  Follow these steps to change the time.

  1. Double-click the current time on the lower right of your screen.
  2. Then click on change time date, then click on the button to change time zone
  3. Select your time zone and the tick to automatically adjust clock for time, then press OK
  4. Then press on apply and OK.

  Method 3:

  If you are using a connection through proxy, then try to disable the proxy and then check if the problem persists.

  Follow the steps to disable the proxy:

  1. Open Internet Explorer
  2. Click the Tools button, and then click Internet Options
  3. Click the Connections tab, and then click LAN settings
  4. Uncheck the Server Proxy use.
  5. Click on apply then Ok to save the changes.

  Now, check if you have access to app store.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Adobe Illustrator for error message "unable to save the picture. You do not have enough access privileges. "ID:-5000"

  Trying to save the illustrator on new Macbook pros and the system file gives me the Illustrator from Adobe to the error message "unable to save the picture. You do not have enough access privileges. ID:-5000 "... No idea what it is how to get a rise out of privileges?

  You are not allowed to write to the specified folder.

  CHEK your access privileges.

  Also: in case you save to a network: do not.

  Try to save in the Documents folder in your user folder. Then close the document and check what needs to be checked.

  If you need additional assistance, please we say system and version of Illustrator and where you want to save.

• Error message: unable to save this article before you save the header entry

  Hi all

  I'm trying to insert data into the table of okc_k_processes using an API. When I run my application, I get this error message: unable to save this article before you save the header entry. I tried to open the API package body and locate the error but could not find it. How to solve this?

  Thanks in advance.

  3065204 wrote:

  No, there is no trigger on the table. But what he really tell by the error and to save the header entry?

  We do not know your code, and we do not have access either!  So, how are we supposed to know what a particular error message?  You can not save the ticket before you save the header entry is NOT an Oracle error, it's a validation error request that someone who wrote the API set.  We can only guess why you get it.

  Your API call should be to create a detail record and requires that you create a header record.

  The validation is

  • okc_contract_pub.create_contract_process and one of its dependencies
  • pa_interface_utils_pub.get_Messages
  • a trigger on a table.

  run the following

  Select *.

  from ALL_SOURCE

  where the TEXT like '% you can not save this entry before saving the header entry %.

  and you'll probably find where.

• Error message "" unable to save the MP Servic > exe "to windows NT or Services"

  Error message "" unable to save the MP Servic > exe "to windows NT or Services"

  I get this message trying to install a Canon printer

  Jim

  A few quick questions for you:

  • What printer model
  • Have you tried uninstalling and reinstalling the printer
  • You, the drivers are up-to-date

  You can try and run the difficulty he tool and see if that solves your problem

• Impossible to install World of Warcraft and the error message "Windows cannot access the specified device, path or file. May not permissions to access you the item.

  Original title: Need help ASAP please

  Hi all

  I am currently running windows 7 and recently I met a problem that has been giving me the error code: 0 x 80070043 and the Error Message: Windows cannot access the specified device, path or file. You can't have appropriate permission to access the item'. When you try to run a Setup.exe for world of warcraft. But the thing is I am the administrator of the computer and have not had this problem in the neck, it is their all settings or something I can do to fix this? any help would be greatly appreicated thanks and God Bless.

  Hello Jay,
  Thanks for posting your question in the Microsoft Community forum.
  The description of the problem, I see that you are unable to install World of Warcraft and error message "Windows cannot access the specified device, path or file. You can not have appropriate permission to access the item".»

  This problem may occur if you do not have permissions for the file or the location of the file, if the file is located on a site that is not accessible at the moment as a network location or an external drive that is not currently connected to the computer or your antivirus software may block the file.

  Don't worry; Let's try a few steps that will help you solve the problem.

  Method 1:
  I suggest you run the fix it and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
  http://support.Microsoft.com/kb/2669244
  You can check the links for more information:

  Install a program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  Install programs: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/installing-programs-frequently-asked-questions

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Error message "unable to connect to a Windows service.

  Whenever I boot my Toshiba ultrabook and go to Internet Explorer (not the tile splash screen), I get an error message: "unable to connect to a Windows service. Windows could not connect to the Service Agent all Windows users. This problem prevents standard users connect. As an administrator, you can view the system event log to see why the system has failed. "One of the consequences, it seems that when I go to my Windows Live email account via the Mail tile, it is no longer updates the Inbox (to any new email here for the last week or two). Another application (XE) is now longer provides updated information on its tile.

  What should I do?

  Hi Chris,

  Thank you for the update.

  I suggest you follow these steps to start the Windows user all install service agent and check.

  a. press the Windows key + R and type services.msc.

  b. search for Windows user all install agent service and right-click on it.

  c. Select Properties and dependencies tab.

  d. check the competent services for the process and close the window.

  e. now search DCOM Server process Launcher and set the type to be automatic and start the service to start.

  f. now seek the End Point Mapper RPC and set the type to be automatic and start the service to start.

  g. now go again to Windows user all install agent service and set the type to automatic and start the service to start.

  h. now, reboot the computer and check the status of the service. If it is not started, start it and look for the question.

  Let us know the status of the issue.

• OATS: Error Message 'Unable to get a connection from the browser' on the record

  Hello
  
  I am involved in the control of the operation for application Siebel 8.1, with the OATS 9.3 tool.
  
  Trying to save, an Error Message * "unable to get a connection from the browser. You want to continue to wait for the browser load? "* appears, even if InstallBrowserHelpers has been installed.
  I tried to uninstall the 'BrowserHelpers' and re - install but the question remains.
  
  your response on this will be appreciated.
  
  Thank you!

  Try to uninstall everything that touches on OATS to your PC then re - install. Uninstall steps are in this forum. You can search for it. Work around the error can take a long time.

  Concerning
  CP

• Error message - unable to find the proxy server - how can I solve this problem

  When I try to enter some sites I get the error message: unable to find the proxy server, Firefox is configured to use a proxy server that is not found. It happened all of a sudden and I don't know why or how I can fix it, it does not help that most help site are blocked. I'm using a Mac 10.5.8 and Firefox 15.

  Set not to use any proxy.

  Firefox> Preferences > Advanced > network > setting > don't score no proxy

• Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

  Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

  I REINSTALL 10 TIMES SO DON'T TELL ME THAT!
  I'm piss because I need firefox work again, so I can finish my reseaching in 5 days.

  
  

• Satellite Pro P100 - error message-"unable to get session notifications.

  Everytime I turn it on I get the error message "unable to get session notifications.
  What is c?
  How difficult or turn it off?

  Thank you

  Hmm... It looks like a 3rd party software notification.
  You may have removed (uninstalled) a program, but the registry contains some bad entries that cause this strange notification.

  You know the free app "CCleaner"? It repairs and cleans them registry and system files. Maybe this program might help to get rid of this message...

  Good luck

• I can't open my Dungeon of docs word any error message "user lacks access privileges.

  I can't open my imported word docs Dungeon receive an error message 'user lacks access privileges' ideas of what she may be contacting Apple and they tried a lot of things and tell Microsoft that the docs are corrupt and nothing wrong with the word 2016.

  More info, please.

  When you say that it is "any word docs", do you mean another user on the same Mac, another Mac, an earlier version of Mac OS X, an earlier version of Word, another type of computer, from another type processor, or something else?

  These documents are currently stored in your Documents folder, into another directory user on an external drive, on a server, or elsewhere?

  You do it on El Capitan? What version of 10.11.x?

  Your copy of the word 2016 is perfectly up to date?

• Outlook Express error message "unable to delete the message.

  I try to delete messages in Outlook Express 6 and I get the error message "Unable to delete Message" I tried to select all Messages, no response...

  I'm glad you had success.

• I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script. Cannot install the Manager of mobile broadband services.

  could not access vb run time for custom action script

  I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script.  Cannot install the Manager of mobile broadband services.  Any ideas?

  Hello

  I suggest you run the fixit and see if it helps:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also check out this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/error-2738-could-not-access-VBScript-run-time-for/1a4499ae-8bc1-4534-9c6f-4d399ac70d9a

  It will be useful.