error message: "windows could not find a certificate to connect to the network.
My NetGear wireless icon shows this error message "windows could not find a certificate to connect to the network.
Hello
Did you change your computer before this problem?
You can follow the procedure in the article.
Unable to connect to the network: Validation and certificate in Windows XP and Vista errors
Alternatively, you can contact Netgear support to improve assistance in this regard.
Welcome to the NETGEAR support
Tags: Windows
Similar Questions
-
I had just restored my Thinkpad T60 the default setting. Reformatted and reinstalled Windows XP, but I am unable to connect to the wireless network connection - message "Windows could not find a certificate to connect to the network Shaida.
Shaida is my wireless modem.
How to fix this problem?
Before the resumption of connection Internet worked normally.
Hello
I suggest you to follow the steps in this link and check if it helps:
http://support.Microsoft.com/kb/870702
It will be useful.
-
When I try to connect to internet on my other computer I get a message saying "Windows could not find a certificate to connect to the network (name)". It's only since I've had a second computer as it does on my old computer which is
a laptop HP Pressario with Windows XP Home Edition. Someone told me to go to authentication in wireless networks, but can highlight something here as everything is gray.
Hello
· What type of encryption do you use on the router?
· You have the latest drivers for your wireless network card?
Make sure the authentication IEEE 802. 1 x wireless card is disabled, and check if that helps.
a. Click Start, then select run.
b. term ncpa.cpl type dialog box and then click OK.
c. right click on wireless network connection icon and select Properties.
d. click the wireless network tab.
e. click on the properties button next to remove it.
f. click on the Authentication tab, and then clear the authentication 802. 1 x IEEE select this network check box.
g. click OK to update the settings.
-
Original title: I'm having a problem trying to connect to a Windows XP SP2 to a wireless secure with WPA2, had this error "Windows Media could not find a certificate to connect to the network.
Not Applicable
Hi StheveOses,
As Cameron O have rightly said, you must have Service Pack 3 and other important updates installed. If you continue to experience problems with the connection to the wireless network, you will have a quick glance at this article.
How to troubleshoot wireless network connections in Windows XP Service Pack 2
(Works for Windows XP SP3 as well)
I hope this helps.
-
I'm so unable to connect to the internet?
Hello.I'm so unable to connect to the internet.
Since I've renamed our WiFi network and add a WEP key, I have problems with wireless connection on my
Windows XP computer desktop, which is a Dell Dimension 4700.The questions that I get connection are...
"windows could not find a certificate to log on the network.
"Limited or no connectivity."
I did all the solutions I could try to fix the connection problem!
1. once I received the message "limited or no connectivity", I click with the right button on the connection and click on repair. It is not always connect for me and I got the "limited or no connectivity message.»
2. then, I disabled the network connection and then enabled. That no longer works.
3. I tried to withdraw from the ordered list of connections, and it still doesn't work.
4. I checked the driver manager, and initially the Ethernet driver was outdated and missing of its pilot. He had a yellow question mark with a black sign and yellow with an exclamation mark inside.
5. I used DriverZone, downloaded the driver, installed and rebooted the computer after the installation of the it. Apparently, it worked. But I could not always connect.
6 I have ensured that I entered the correct WEP key, and then adjust the settings correctly. I did it like 10 times in a row and would not always connect.
7. I tried to go to the command prompt and typed in IP Config/All and that's what I mean.
Windows IP configuration
Node type: unknown
Active IP routing: no
WINS proxy enabled: no
ETHERNET connection to the Local network card
State of the media: Media disconnected
Description: IntelPRO/100 VE Network Connection
Ethernet card 2 wireless network connection:
Suffix the connection-specific DNS: (EMPTY)8. after that, I typed the command: ipconfig/release
and then I got this error...No operations can be performed on the connection to the local network, although it has its media disconnected.
9. after that, I tried Googling for some solutions, and the solutions I found were not any use.
A solution was10. opening of Services...
Start | Run | Type: services.msc | Click OK |
Scroll down to and double-click Client DNS | Set to automatic on startup
type |
Click apply | Click the Start button | When it starts, click OK
Do the same for the DHCP Client.
Do the same for the remote procedure call (RPC).and it still doesn't work.
11. when I look in the menu network connections, I see my connection with a lock on the side, with a red X under the lock and key. In the description, I see not connected, protected by a firewall. How could I remove the internet connection firewall? I disabled the firewall and that did not work.
12. I tried to uninstall and reinstall the network card and who does not work either.
It is not the network itself that is the problem. It is not the modem or the cable. There are no disconnected son or something like that. We have other computers in the House and the internet works fine on other computers. As I said, since I renamed our WiFi network and added a WEP password, I had problems with connecting to my Windows XP computer.
My computer has updates that must be installed as well. Updates would fix the problem? I just need to have internet.
What should I do? Thank you for your time.
Sincerely,
Justin
Have you tried to set the value of the link speed/duplex mode? I had the same problem you describe. Your card is only capable of 10/100 communication.
-
Windows could not find a certificate to log on the network
So I try to connect to the network that appears, and then trying to connect but it with "Windows could not find a certificate to log on the network. Now, I tried unchecking security in the properties box and also to uncheck it to 'use windows to configure my wireless network.
NONE OF THESE WORK FOR ME!Also attempted to fix the network, but he says that "windows could not finish repairing the problem because it is impossible to perform the following action: connect to the wireless network '"I am currently under SP2, but in the process of installing SP3.Help!This error usually occurs because you have specified a connection protocol 802. 1 x. You must configure your properties to uncheck this box. See the following article:
"Windows could not find a certificate to log on the network.
HTH,
JW -
Windows could not find a certificate to log on netgear47
I have 2 laptops, Dell is connected and the notbook connects without a problem. I try to connect this old Vaio pcg - K33 K series and the message above. It comes to XP.
I hung a cable from the router to the computer and can get online but still can't hang wireless.
Your information is somewhat distorted, but I guess that what follows:
'Netgear47' is a model of a Netgear wireless router.
The error message that you get on the Vaio is similar to "Windows could not find a certificate to connect to the network.
What version AND service pack of Windows XP is installed on the Vaio (right click my computer and select Properties, if you do not know).
The most likely problem is that on the Vaio's wireless adapter is misconfigured. If you use Windows wireless zero configuration (WZC) to configure the card (and not a utility provided by Sony), see the following for directions on how to correct this problem: http://helpdeskgeek.com/how-to/windows-was-unable-to-find-a-certificate-to-log-you-on-to-the-network/
While you are on the "Wireless network connection properties" screen (in the middle of the 3 images on the site linked), look at the box at the top ('use Windows to configure my wireless network'). If this box is NOT checked, then the fix suggested on the web site may not work and you will need to use the utility Sony to make a similar change. In this case, it may be easier to simply delete the 'profile' of your network in the utility of Sony. When you try to connect after you have deleted the profile, the network must be configured correctly.
-
I read through all the posts related to "Windows could not find a certificate...". "but still failed to get a solution for my problem.
Well, I have no problem with the installation of this modem to router Wireless G ADSL2 + for both my notebooks of Vista, they work perfectly.
However, I have difficulties with 2 other computers that move on the XP version. This version XP 2 PCs sometimes show the connection of the signal very strong to my network and sometimes simply shows "Windows could not find a certicate to connect to the network.
Even when it indicates strong signal to my network connection, I can still surf the internet/LAN. Where is the problem?
Can anyone help?
Thanks for the reply.
Nonetheless, I have chosen the way easier and solved the problem.
Connect the network cables for these 2 not for PC XP update and they work just as perfect as my other 2 portable VISTA wireless.
-
Impossible to format CD
Windows Vista Ultimate SP2 installed
When you try to format CD - RW, error message "windows could not finish this format.
Because the installed SP2 (which supposedly contains the fix for the problem) can not install the patch - receive 40 Code error when system tries to decompress the files.
Help?
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD
Burn a CD or DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use
Should which CD or DVD format I use?
See if help above.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Otherwise:
It comes with Vista, upgrade install and activate Forum.
http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads
They will help you with your question in Vista Hardware and drivers Forum above.
See you soon.
Mick Murphy - Microsoft partner
-
Hello
I tried to connect wireless to my network with a netgear mordem.and saying "windows could not find a certificate to log in to a network" I was using a mordem delink and never had prob.when I call my internet provider as they gave me this new mordem free, is to show that msg.but when I connect by netgear cable is efficient. my windows operating system is windows xp
Thank you
Hello
I tried to connect wireless to my network with a netgear mordem.and saying "windows could not find a certificate to log in to a network" I was using a mordem delink and never had prob.when I call my internet provider as they gave me this new mordem free, is to show that msg.but when I connect by netgear cable is efficient. my windows operating system is windows xp
Thank you
Thanks for posting. Follow the instructions below carefully.
- Click Start > run > type or paste devmgmt.msc > click Ok or press ENTER.
- Scroll down to network adapters. Develop the content by clicking on the symbol +.
- Locate your wireless adapter. Right-click on it and choose uninstall. Confirm the prompt.
- Restart your computer. Allow Windows to detect the new hardware. The driver and the device needs to be reinstalled automatically the resolution of the problem.
-
error message
Windows could not start the Bonjour service on local computer
Error 5 access is deniedI have Vista Home.
This prevents me to update I have tunes.
Completely uninstall iTunes. Download the update manually from Apple or here. Restart the system and then install the software you have downloaded.
-
Original title: trouble installing the drivers for my printer.
Hello
I am trying to install an EPSON L110 and eveytime I try to run the CD, it appears this error message.
Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.
I have windows 7 32 bit OS. What I'm doing. A quick response will be very useful.
TKS
Gerard
Hi, Germain,.
This problem could occur due to corrupted files. We will try to download and install the latest printer driver on the site of the manufacturer of the printer. Check if it helps.
See the articles for more information.
Find and install printer drivers in Windows 7
Hope this information helps. Answer the post with an up-to-date issue report to help you further.
-
Original title: Unable to connect to the wireless network
Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7. "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address. Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3. It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.) Before that, wireless network worked well. (So unable to connect to the Internet for updates.) Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate. I don't remember what I did to try to solve this problem in the last days.
I should add that I have tried the solutions of the previous forum on this topic, and none worked.Hi Marilynnla,
Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.
Read this article and follow the steps. Lets see if it helps in any way.
How to troubleshoot wireless network connections in Windows XP Service Pack 2(Works for Windows XP SP3 as well)
-
Original title: suddenly Windows XP does not open
After using the computer someday, he would not start the next time I lit. Windows tried to start but failed and went to a black and white screen saying windows could not open possibly due to a hardware or software upgrade and invites me to try opening windows normally, safe mode, using the last well-known congig, etc... Every choice has ended up doing the same thing, windows tries to start and end up back in the black and white screen.
Hi Brian,.
1. you receive messages or error codes?
2. did you of recent changes on the system?
You can read the following article and check if it helps.
Computer stops responding with a black screen when you start Windows XP
Hope this information is useful.
-
Try installing Windows 7 from XP and keep having this error message before choosing my instalation method, Windows not able to retrieve information about the disks on this computer.
Because the migration from Windows XP to Windows 7 requires a clean install anyway, might as well you are backing up your important files and settings using Windows Easy Transfer and do a custom clean install by booting from the Windows 7 DVD.
http://www.notebooks.com/2009/10/13/WinXP-to-Win7/
Maybe you are looking for
-
My pc DVD drives non-functional drive
In it these last daysas my my pc dvd player has stopped working and it appears that the hp DVD-RAM UBBI SATA CD-ROM drive is missing and I tried everyth ing to reinstall disk you required, but nothing works, please help
-
Satellite M100 recovery disk failing after loading ramdisk image
Hello world I have a Satellite M100 (bought mid-2006), 512 MB RAM, 60 GB HDD, Intel CPU T2050. I decided to have a cleaning and use the restore disc to return the laptop to factory settings, and then reinstall only what I really wanted.I had this don
-
Can someone tell me if Win 2000 is compatible with the dual core systems? Thank you!!
-
Envy 15-u280nb x 360: disk HARD upgrade to SSD
Hello I recently bought a new laptop with a HARD drive,On this site, I saw how to open my laptop: http://support.hp.com/ph-en/document/c04349558Now I have this HARD drive: WD7500LPCX (7mm height)Is it possible to replace it with an SSD (samsung evo 8
-
report indicating the connection times