My pc DVD drives non-functional drive

Similar Questions

• HP Pavilion p7-1234: functional CD/DVD drive will not boot Clonezilla disk recognize

  Have three HP p7 in small desktop running Win 7 64 bit. (Avast free version)

  None of them will recognize a bootable Clonezilla ISO or Zip, whether on CD/DVD or USB.

  Measures already taken:

  BIOS set to boot from CD/DVD

  In turn the BIOS configured to boot from USB

  Have used any compatible version of Clonezilla downloads based on my operating system and the processor, including the generic i686 ISO and Zip. (and makes bootable USB drive)

  CD/DVD and USB function perfectly well otherwise. Able to access the other disks and USB media with no problems.

  Also able to see the Clonezilla ISO when I look at the CD/DVD drive.

  It starts simply what whether Clonezilla.

  If someone has encountered this, I would like to share your experience.

  Thanks for your time.

  One rookie mistake.

  Problem:

  Bad, I carved the Clonezilla ISO to CD/DVD disc.

  Solution:

  1. download the ISO Clonezilla appropriate for your computer, on your desktop.
  2. place the disc in the CD/DVD drive
  3. "right click" on the Clonezilla ISO on your desktop.
  4 Select "Burn Image" and follow the default values.

  Now you have a proper boot Clonezilla disk.

  Next:

  1. make sure the BIOS is set to CD/DVD is bootable.
  2. place Clonezilla disc in open the tray of the CD/DVD drive.
  3. restart the computer and close the CD/DVD tray
  4 put your finger on "F9" key and now wherever the blue HP screen appears, press "F9".
  5. boot Menu loads.
  6. move arrows down to the first line indented under "ATAPI CD/DVD DRIVE...
  SATA2 or SATA3 will be according to your system.
  7 hit ENTER.

  Clonezilla immediately, boots and loads.

  I hope it works for you.

• Trouble shooting Code 39 / none of my CD/DVD drive can be loaded or work because of this code. What should I do?

  I can't connect my external or internal CD/DVD-ROM due to Code 39 readers? What should I do about it?

  Hello

  Try to remove the filters in your registry of the computer from the CD/DVD drive to get rid of the error CODE 39. Please see the link below:

  http://support.Microsoft.com/kb/982116

  Thank you! :-)

• CD/DVD drive is not detected or functional

  Title:

  FixIt error 0 x 80092003

  Restore the computer to factory settings, ran RegistryBooster to fix registry errors and defragment, CD player continues to ruin, tried to run FixIt, but get error 0 x 80092003 each time. What should I do?

  Hello

  You can try to run the manual steps from the link below.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Hope this information helps.

• Dynadock U with USB powered external DVD drive

  Toshiba dynadock U PA3575A-1PRP
  Iomega superslim DVD 31785700 dvdrw8x-u
  ASUS U36J laptop Windows 7 64 bit
  latest updates for Windows and installed Dynadock

  Hi, this external DVD drive has 2 USB connectors (data and power) and no power supply.
  The dynadock has alternating current.
  When I connect the DVD directly to 2 USB ports on the laptop, it works.
  When I connect an external hard drive to the Dynadock USB powered it works
  When I connect the Iomega DVD drive to the dynadock, it doesn't work and I get an error message "power surge on hub port."

  I tested a second dynadock and DVD player (same model) and the same problem occurs.
  I also tested all of the USB ports on the dynadock, front and rear.
  I looked online for limitations on the dynadock, but found none.

  I look forward to any constructive suggestions or information.

  Hello micjam,

  the Iomega DVD drive also not functioning, it is linked to the dynadock?
  No mouse, keyboard or other usb devices?

  Have you tried plugging the dynadock to a different usb port on your computer?

  Perhaps there is an update of the bios available for your computer.

  Check this box

  Best regards

• DVD drive no longer works after the installation of PowerISO

  I recently installed PowerISO and he took my physical DVD drive so I can't use it. The drive does not appear in Windows Explorer. The drive appears in the parameters of the material, but with the note that the driver has been disabled, and another driver provides functionality. There are questions on the net on this WRT to PowerISO (wish I had seen these before that I loaded it) but no real and tangible solutions. I tried to uninstall the device, reload the drivers and even bought a new DVD player and installed it but it happens with the same question. None of em fixed work. I did a complete refresh of BIOS and CMOS, nothing helps. Readers do not appear in the BIOS settings but show (with numbers) to the setting of the material. I also removed PowerISO, which did nothing. Then I re-installed and changed the setting Virtual Drive 'None' in thinking that this was taking on my physical drives. Nothing. So I still once uninstalled.

  In addition, if the problem persists, can you check the following registry key? :

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  To the registry for this key, in the right window, in the world is here, under 'Name', a LowerFilters and UpperFilters value?

  If so, for UpperFilters and LowerFilters, value which is listed under "data"?

  There is most likely a bad entry in one of these values that would have made the installation or uninstallation of software.

• Asus DVD drive does not

  I know there have been quite a few posts on this topic in other forums as well as this one, but none of the proposed solutions have solved my problem.

  I did a clean install of Windows 8 on my Intel SSD (c), I have a secondary 1 to (e) and an external USB 3.0 drive (f).  I normally have a D: drive to the DVD player.  I installed WIndows 8 via an installation DVD I created from the downloaded installer.  I was able to complete a clean install.

  I used Windows 8 without any problem until I got a DVD with pictures (photos from my wedding!) in my computer. Then I realized that my D: drive was no longer there...  I rebooted thinking it was a fluke. I tried to use several other CD/DVD, but no matter what I did the DVD player was not appear.

  First thing, I thought that if he did not have a drive letter assigned, then I went into computer management / disk management and the DVD Player did not show up.  I see in Device Manager: CD-ROM/DVD-ROM drives > ASUS DRW-24B1ST. It has a yellow! symbol on the disc.  I uninstalled the driver, rebooted, and he had the yellow!.

  I went to ASUS website and tried to install the driver but received an error message that the device was not found.  So I tried manually updating the driver but get this message ' Windows found driver software for your device, but has encountered an error trying to install it. "  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  I found a forum post referencing the registry providing this command "reg.exe add"HKLM\System\CurrentControlSet\Services\atapi\Controller0"/ f/v EnumDevice1 /t REG_DWORD /d 0x00000001" I ran this command as an administrator, restarted my computer, but still do not have a functional driver.

  Anyone know how I can "adjust" the registry so that this DVD player will appear and be usable again?  I don't think there is an error with the drive itself since it was used to install windows 8 and has been very well supported.  I have to check that it is correctly connected to the motherboard as well.

  Thanks for all your help!

  FIXED!

  I found the solution! So my post above will make me look like an idiot now, but the ASUS technical support has been incredible and provided a fix!  It 100% corrected my problem and my DVD drive appears in the workstation again.

  Here are the instructions that they sent me.  I don't know if this is specific to the ASUS DRW-24B1ST drive, or if this will fix the problem with any DVD player.

  Click on start--> run, type "regedit" and click OK
  Expand the HKEY_LOCAL_MACHINE key (it looks like a folder) by double clicking it (or clicking on the '+' next to it.)
  Expand the SYSTEM key
  Expand the CurrentControlSet key
  Expand the control key
  Expand the class key
  Please look for a key containing the following string of letter and numbers: {4D36E965-E325-11CE - BFC1 -

• No access to the DVD drive - 38 error code

  Update Driver published 07/07/08 to 23:59 has been installed on my system as made by Toshiba Tempo but rebooting my machine, I get error 38 (according to Vista) that prevents the new driver installation as the old pilot is resident in memory... ?? Effectively, this means that I can't access or see my DVD player more in other ways than in the page Manager devices Control Panel. Option driver restore is not available, perhaps because it was an update of the firmware. The message on the device properties page is as follows:

  Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  The installed updatre was frmwre-20080707134447. It includes an Adobe document that tells you what to do and how to ensure that your drive needs to be refreshed, which was easy to follow and loose my machine.

  I tried to uninstall the device and the driver, but whenever I have to reload the same error occurs.

  I'm really impressed and quite embarrassed, because it is a recommended Toshiba firmware update done using their system of Tempo, ideas or advice welcome.

  Thank you

  Matt

  Hello

  Do you see a CD/DVD drive in Device Manager?
  If so, then remove it from the list of devices.

  Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Finally restart the laptop and check if the CD/DVD drive would still be functions

  Further details can be found here:
  http://support.Microsoft.com/kb/270008/en-us

• Need to retrieve using an external dvd drive for Portege R series

  i've got criptolocker virus, I need to format the computer to load back up, my dvd player is broken, because the computer has drop down in the past. I put the recovery on an external dvd drive CD, but I'm not able to work, it detects the dvd drive in F:, but is not read

  I have format my protégé R700 1 2 but I have lost my recovery disc
  Come posso fare devo formattare it portable mio protected R700 1 2 e non trovo piu' I disco di ripristino. Dove posso find lo. ?

• Satellite L750 - upgrade of Windows 8 - DVD Drive missing

  I have upgraded to Windows 8, after a short then I found the DVD was not displayed in Explorer windows and devices. I had seen this before on another laptop and install drivers SATA 8 Win seemed to heal.

  I went to the section pilot on the Toshiba site for this model and there is none for SATA. Can someone point me in the right direction for a fix or Win 8 SATA drivers for the this model please?

  Concerning
  Mark

  Toshiba Satellite L750-1E8 (model short name = PSK1W8)

  * Why my CD/DVD drive does not work after upgrade to Windows 8? *
  http://APS2.toshiba-tro.de/KB0/FAQ2B03F10002R01.htm

  You must uninstall the programs from Toshiba:
  TOSHIBA Recovery Media Creator
  TOSHIBA Disc Creator

• DVD drive is dead - l need to reinstall XP Satellite A105

  Hello world

  My wife went on vacation in Hawaii, and while she was missing, its Satellite A105 (is no more under warranty with a dead DVD player) started to malfunction to the point where XP where freeze at startup.

  I tried everything I could, but it wouldn't boot.
  So finally I took a DVD USB drive formatted the drive with killdisk and tried to use the recovery disk to at least get the operational unit. Problem is that the unit does not complete the installation I get the following error:

  Windows cannot find c:/bin/errordialog.exe

  I thought it was the disk so I cleaned it and still the same thing, since I was a student, I had access to XP pro from the msdn network so I got a copy and still the same error.
  I don't have a big enough USB flash drive, and the laptop doesn't have a floppy so I'm stuck with no way to restore the operating system... Needless to say that the wife is not happy with me!

  I managed to get Linux installed without problem, but my wife wants his laptop back to xp and will probably hate me until I can correct what I did. Help, please!

  TIA

  As far as I know it s is not possible to boot from the CD/DVD USB drive and reinstall the operating system by using this procedure.

  I would recommend therefore to replace the CD/DVD drive with a new, then boot from the Toshiba Recovery CD.

  The CD/DVD drive is an essential device for laptop and it is worth having a what functions and trouble free work.

  Welcome them

• Satellite U300 - CD/DVD drive cannot read disks

  My CD/DVD drive does not work.

  It can be heard at work (or maybe working), but it cannot read the discs - music films or niether. The 'properties', says the disk is full, but can not read the contents. Neither is it give details of the content.

  If I run iTunes or Real Player, suffice to say it is a blank disc in the drive and told me to get ready to burn to a disc. But in his own info says that the disc is full! Windows XP sees the drive in 'Properties' and said that it is complete, but does not display the contents of the disc. Devices, said the drive (type HL-DT-STDVDRAM GSA-U10N) "working properly".

  I have turned off the HDD (software protection movement) protection because he stirs a warning whenever the unit darn picked. I tried to use the drive with it on and outside. My computer is 18 months old (I think), but this problem has existed for a year and gets more and more frustrating.

  Help please.

  Hello

  You can find enough son here in the forum about problem of CD/DVD disc then please use the search function of the forum first.

  I founded an interesting thread for you you need to check:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=162032

• Satellite 2430: CD/DVD drive does not work - i/o error

  Hello all Toshiba people.i have recently bought a Toshiba Satellite 2430 for a very good price. One thing the carpet * a DVD - ram Uj - 810 drive does not work when I put in any type of cd or dvd, I get this error
  F:\ is not accessible.
  The request could not be performed because of an i/o error.

  I talked to my local computer Wizz and does everything that he suggested to the letter and still the same problem. He suggested updating the bios drivers and the only way to do that is on a disk drive that she cannot take the an or a CD or dvd drive is not working. Can you please help me!

  Begging you a lot
  Michael Borger

  In my view BIOS update will not change.
  I assume that the reader has worked in the past with the same BIOS version
  It is a drive hardware problem or some registry keys are corrupt.

  I think that it s a hardware malfunction may be a matter of lenses.
  But try this;
  Remove the drive from Device Manager and shut the laptop computer. After restarting again the operating system should recognize the drive again. Then you can check the functionality.

  Otherwise, you can remove the disk from the laptop, and then start the laptop without the drive. Then stop the laptop, put the drive in the notebook and start over.
  The firmware should again loads.

  But if these procedures help t, I don t see it differently as for replace the drive

• Re: Satellite A660 - 2nd HARD drive instead of the CD/DVD drive

  Hello

  I found a few solutions to this problem ([solution | http://www.newmodeus.com/shop/index.php?main_page=page&id=7&chapter=0]), but none of them are dedicated to A660.

  There is no device dedicated to tosiba a660?

  Thank you.

  Hello

  I know Satellite A660 can't stand not a thin Bay select only some models like the M400 Portege, Portege M750, Tecra M9, Tecra S3 or S4 Tecra, Portege M700 support this feature

  So 2nd HARD drive instead of the CD/DVD drive does not seem to be possible

• Satellite A210-1BX - error based on the CD/DVD drive

  Hello

  I have a problem with my DVD writer! I use Nero and if I burn MP3 CD or DVD .avi files happens whenever an error based on the drive. No detail!
  But on the CD are the opder of 1/2 3/4 data!
  If I insert an .mp3 CD Windows Vista said, the CD is empty! Vista is already NEW!

  Can someone help me? Or I have to contact Toshiba, I guarantee!

  Thank you

  Hello!

  Have you checked the site factory of Nero for an update? Maybe it s just a software problem that the burning procedure fails.
  In addition, you can try another burning program. A few days ago, I tested CD BurnerXP and I was very surprised! It s a freeware program and it also contains a large number of functions that it s worth a try! ;)

  Here in the forum I noticed that the dismantling of the upper and lower filters can often solve problems with the CD/DVD drive to check of workaround from Microsoft:
  http://support.Microsoft.com/kb/314060

  Good bye

• After dismantling Satellite A60 cannot detect the CD/DVD drive

  Hello

  I opened my laptop to clean-up and it was the first time that I never opened a laptop. Messed up at the opening of the cd/dvd drive.
  Instead of just pulling out, I started its opening screw but quickly realized that this is not the right way. So I took it out. Rest of the disassembly procedure went well and I assembled it back but he little silver r 2 bands and a small source, which I'm sure that belongs to the CD player and I couldn't adapt it.
  And I don't know how it fits.
  The computer does not detect the drive. Although I can open it by clicking on the Open button, then he hang out by sharp object. (The light will blink showing the power exists in)

  The second thing is the microphone. I've never used until last week, but my voice is going through. The system does not detect any microphone.

  Help appreciated

  Hello

  On this path, it is not easy to say what is the problem with CD/DVD player. Are there signs of the CD/DVD drive in Device Manager or the drive is not displayed in Windows Explorer?

  How did you test mic? Try it with the tape recorder for windows. So you can test the functionality of the mic on the easiest way.