Error MKS

Similar Questions

• Error MKS on the internet.

  I can not get to the console of the time of my VM to connect on the internet.  Here is the configuration.

  {public IP} redirection of ports: 443, 902, 903 > {vCenter Private IP}

  Domain name COMPLETE for vCenter and the two hosts resolved to {public IP address}

  When you try to connect to the console I get the message:

  "Unable to connect to the MKS: unable to connect to the server {host VM's FULL domain name is on}: 902.

  What I'm missing here?

  At VM connection console always going to ESX, not vCenter.

  André

• Binary translation is incompatible with the long mode on this platform. Windows 7, processor intel core i5

  I install VMware Workstation 12.1.1 Player for Windows 64-bit operating systems on Lenovo intel core i5 Windows 7.

  I have a copy of VM for HP Quality Center with the VirXPSP3.vmx file and the environment.

  When I try to open the Workstation Player vmx file:

  (1) I got prompt that machine virtual seem to be an option to take possession and use

  2) after taking possession, I try to play the virtual machine, I got a prompt with "binary translation is incompatible with the long mode on this platform. Long mod will be disabled in the virtual environment and application requiring long mode does not work correctly as well. See http://vmware.com/info?id=152 for more details. »

  Link is on this page: system required to install an operating system 64-bit on a 32-bit host (1003945) client. VMware KB

  Host is definitely 64 so I'm puzzled with this is the case.

  (3) next step/guest is: "this virtual machine may have been moved or copied. I clicked on the button "I copied it".

  (4) the following message:

  Fatal error VMware Player: (mks)

  Exception 0xc0000005 (access violation) occurred.

  Log file is attached.

  Line 476 in the log file is:

  The following features of VT - x are necessary for the support of VT - x in VMware Player; However, these features are not available on this server:

  2016 06-07 T 13: 51:34.466 - 07:00 | VMX | I125: hostCpuFeatures = 0x217d

  In one of the previous installation, I did virtual Intel technology enabled in the BIOS after one of the responses of your forum. It has not removed the error.

  Just to clarify whenever I have uninstall I'm your site troubleshooting steps:

  (1) Uninstall using Add/Remove program of the program and features

  (2) run the installer with clean / change

  I do above steps as an administrator and restart after each step.

  On top I have delete the following folders:

  C:\Program Files (x 86) folder \Common Files\VMware

  File C:\ProgramData\VMware

  File C:\Users\Ivana\AppData\Local\VMware

  Files C:\Users\Ivana\AppData\Local\CrashDumps\vmware-vmx.exe.*.dmp

  File C:\Users\Ivana\AppData\Local\Temp\vmware-Ivana

  File C:\Users\Ivana\AppData\Roaming\VMware

  And delete the folder with the Virtual Machine for HP Quality Center.

  Do you know how can I fix a fatal error (mks)?

  The same installation works fine on HP with Windows 7, i.e. copy of VM for HP Quality Center is ok.

  Thanks in advance for your help.

  Usually, this is caused by outdated or incompatible graphics drivers on your host.  I expect that the latest drivers for your integrated Intel HD Graphics 4000 would be probably already delivered through Windows Update, however.  Could be interesting to see if there is an optional update in your Windows Update list to get a new graphics driver.

  Otherwise, you can try the problem by disabling 3D graphic acceleration: from the VM menu, select settings..., and then in the list of material , choose display.  Clear (uncheck) the box 3D graphic acceleration .

  I hope this helps!

  --

  Darius

• Who is looking at my virtual machine using the VSphere Console at the same time?

  People,

  I would like to know if it is possible to know what VI Client / vSphere console user currently displays the Vmware console at the same time for a particular virtual machine I'm working on?
  Because right now, someone else is my VM console access and may have forgotten to close the VI Client and now I'm stuck.

  This is the error that I got when I try to connect to the console. Internal error MKS due to the 'RemoteDisplay.maxConnections with a value of 1"is in force.

  Thank you

  Hello, AlbertWT-

  Well, it seems that there is another way.  You can get the number of current connections of MKS (mouse keyboard screen) for the given virtual machine and uses this value to your Select statement.  Which must correspond with the users with current MKS connections to this virtual machine.

  So, what to put with what hosted proposed and you changed, it would be like:

  $strVMName = "myVM"## get VM; will use an ExtensionData value from this later$vm = Get-VM -Name $strVMName## get the events that are for console connects, sort, and then select the first X items, based on the number of current MKS connectionsGet-VIEvent $vm | ? {$_.FullFormattedMessage -like "Remote console Connected*"} | Sort CreatedTime -Descending | Select UserName, CreatedTime -First $vm.ExtensionData.Summary.Runtime.NumMksConnections | ft -AutoSize
  

  And, a variation on the last line, the one who checks the type of the VIEvent (vs do a string comparison):

  ## same, but check the event type instead of a string compare on the FullFormattedMessage (just to not rely on string compares)Get-VIEvent $vm | ? {$_ -is [VMware.Vim.VmRemoteConsoleConnectedEvent]} | Sort CreatedTime -Descending | Select UserName, CreatedTime -First $vm.ExtensionData.Summary.Runtime.NumMksConnections | ft -AutoSize
  

  The two should work, but the second version removes the dependency on the string comparison.  For example, if the FullFormattedMessage changes in the future implementations of vSphere, things should still work (However, this would be still vulnerable to break if VMware changed the name of the type of the event).  A bit of a preference thing.

  How does do for you?

  Note: by sorting on Createduserid, this process assumes that the current console connections have been made in the order.  In other words, if someone has been connected to the console of the virtual machine since yesterday and connect / disconnect / reconnect, _you_ will be the last two events Connect.

• VSphere from VMware vCenter Server Web Access from the Internet

  I tested VMware vSphere (ESX 4) and tried to connect to the internet for the Web Admin Access VM only.  I can connect the vCenter Server (on Windows) http Web Access features and manage the configuration of all virtual machines. But when I try to connect to an actual vm via MKS, I get an error MKS as ' unable to connect to the MKS: unable to connect to the xxx.xxx.xxx.xxx:902 server.»  The xxx.xxx.xxx.xxx is the IP address of the ESX Server HOST and not the Server vCenter (which administers the host).   I have ports 80, 443, 902 and 903, on the firewall, open to point to the server vCenter Server.  When I'm on the LAN, I can do everything without a problem. Its only when I try to connect directly from the internet through our firewall I get the above error.

  Someone at - it suggestions?

  Andrej770,

  vCenter Server transfers you to the ESX host hosting the virtual machine, and the remote console runs on port 902.

  You want to go directly to the ESX host on port 902 through the firewall to connect to the Virtual Machine console.

  You want to see the pages "Guide de Configuration ESX" 146 for more information.

  http://www.VMware.com/PDF/vSphere4/R40/vsp_40_esx_server_config.PDF

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• VSphere client web - Remote Console error: unable to connect to the connection of mks (name of user and password) incorrect

  Hello

  I am running vmware Fusion on my mac computer. I created a domain with 2 vm ESXI, VSPHERE client and a DC inside the merger. My mac is not inside the area, but can access the area through clearOS router which is also inside the virtual machine. my mac has IP 192.168.2.x and my management in the 10.0.0.x field segment

  When I try to access a virtual machine on my esxi from my mac, I get the error failed to connect to the connection of mks (name of user and password) incorrect. I guess it has something to do with my mac is not in the area, but no idea how I can solve this problem?

  Thank you

  solved by adding the ip address of my ESXI in my macs hosts file

• Unable to connect to the error of MKS

  When I am plugged into the network, I can open the consoles of virtual machines without any problem. However, when I am out of the office and connect to the network via the VPN, it leaves me in vSphere, but when I try to log on to a computer virtual console, I get the error "unable to connect to the MKS. Unable to connect to the server {server name}: 902. Why I open a console when it is connected to the network, but not when I am connected via VPN? Thank you.

  See this KB Article

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=749640

• Unable to connect to the MKS: internal error

  After you add the hosts to vCenter, when I try to KIKILA the VMRC, I get the error: could not connect to the MKS: internal error

  First of all, this isn't the usual DNS resolution of Host IP addresses MKS error! This is something totally different.

  An unusual thing in the manifestation of this problem which is to turn it off (completely off, not a reboot) and then turn the virtual machine in question, the console will work for this virtual machine, but the console continues to malfunction for the other virtual machines on the same host until these virtual machines are vMotioned or completely powered by bicycle!

  Here's the workflow:

  1. I have to stand up a new ESXi (patched and firmwared to the latest updates)
  2. I build a Windows or Linux VM to serve DNS and/or be an AD domain controller
  3. I have install the VCSA (or Windows vCenter)
     1. I connect and test forward and reverse the resolution for all hosts in the Broadcast domain
  4. I add the ESXi host (and all other hosts) to vCenter
  5. I try to open a VMRC and get the MKS error!

  It is a minor problem, with the exception of the VCSA himself!

  Any ideas?

  I had the same exact symptoms as you. Fortunately, I was able to find this link:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2116542

  Looks like we have a need is power off and turn it back on, suspend and energy back or vMotion to another host to resolve. I guess it has to do with the generation of a new SSL certificate when joining a host to vCenter? I checked that at least the first two options work, so I hope that answers your question.

• Unable to connect to the MKS: address for server esx02.mgmt.domainname.dk host lookup failed: unknown error 11002 (0x2afa)

  I get the following error when I connect to my via Vsphere Vcenter and try to connect to one of my server with the console:

  Unable to connect to the MKS: address for server esx02.mgmt.domainname.dk host lookup failed: unknown error 11002 (0x2afa)

  I'm new to VMware, I can very well do a MSTSC server and work proberly.

  the VMwareTools are out of date, when I log on the server and try to update I get the following message:

  

  any ideas here?

  I discovered that it is related to DNS

  WSATRY_AGAIN

  11002 (0x2afa)

  It is usually a temporary error during hostname resolution and means that the local server does not valuationauront of response from an authoritative server.

  the issue was that the VMware system was on a different subnet, and the firewall (TMG) blocked. bring the RDP to the Vcenter server and vsphere then open works like a charm

• fatal error VMware: (mks) after increasing memory

  Hello

  I'm using VMware workstation 6.5.3 build 185404.  Image has been created with 752MB RAM.

  Host and guest OS are Windows XP.

  Host has up to 4 GB, so I want to increase the memory of the image to 2 GB.

  After increasing the memory to 2 GB, when I start working with Visual Studio 2008, the image freezes and I get the following error:

  Fatal error VMware Workstation: (mks)

  13:59:53.070 Jan 05: mks | Exception 0xc0000005 (access violation) occurred

  If I display the memory back to 752MB, then fine. This behavior is the same on two different machines.

  I don't have a support contract.

  I have attached the log file.

  Any suggestion?

  Concerning

  Murali

  try commenting out these lines in your vmx for a test file:

  MemAllowAutoScaleDown = FALSE

  MemTrimRate = 30

  vmci0. Unrestricted = TRUE

  MKS. Enable3D = TRUE

  vmci0. Present = TRUE

  # allows you to comment out the lines

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Unable to connect to the MKS: could not start the MKS client: unknown error 193

  Hi friends,

  The display console VMware vSphere Client, I am faced with such an error.

  I want you help me in this matter.

  I also share with you the screenshot.

  Thanks in advance.

  vSphere-4,1

  There are few reasons for this. Please try the steps below.

  #) Features in host ESX adds the host file on the machine where you have access to this.

  OR

  #) Add the DNS entries respective of the ESX host on the DNS server.

• MKS 925 transducer - able to read but not write.

  I have labview code running that communicates with the two transducers MKS 925 regularly pulling their transcripts once per second.  He has stopped communicating recently and I was at a loss to identify the breakdown in communication.

  I opened NOR-MAX to test the separately from the program's communication and checked it is a failure of communication there as well.  I plugged in a PRD900-12 and confirmed the transducers can communicate with other devices, but not with the computer I'm on.

  With the help of the PRD900 I tried to send a signal to test for labview and with success has received it, but still have the error message: "error reading VISA operation: (Hex 0xBFFF0015) timeout expired before the operation is complete."

  I confirmed that I use the right address for the PRD controller and transducers.  I also checked and made sure that the right com ports.  The "write" command I send must change the address on the transducer or the controllers and it doesn't.  I am able to change the address from other devices via a serial line, but not through communication NIMAX and not through my labview code.

  Because writing orders do not work, the transducers/controller never taken trouble to answer and I get timeouts on my reading.  I am new to both labview and NEITHER so I don't know if there is an obvious mistake, I do and would love your feedback.

  I have searched several times for problems to be able to read but not able to write and everyone seems to have the opposite problem, but in advance I apologize if this is a repeat problem answered elsewhere.  I'll be happy to provide more information if I left something that is necessary to solve the problem.

  

  My settings are below:

  COM10 device status:
  ------------------------
  Baud: 9600
  Parity: None
  Data bits: 8
  Stop bits: 1
  Timeout: WE
  XON/XOFF: OFF
  CTS Transfer Protocol: OFF
  Transfer DSR Protocol: OFF
  DSR sensitivity: OFF
  DTR circuit: OFF
  RTS circuit: OFF

  

  To show that I am using the right commands:

  

  Hey kwauson,

  I'm really sorry to hear that it still does not, but happy that we could help narrow down your search!

  Good luck with your request, I hope that troubleshooting is fine!

  Thank you

• Code error-1073807253 of VISA.

  I try to remote control the controller of flow of mass MKS 647 and function of 33120 Aglient A generator for my highlight of the College project.

  I installed NI-VISA (for RS232 command) and NOR-488. 2 (for GPIB control). I downloaded the drivers via LabVIEW:

  Tools > Instrumentation > find instrument Drivers...

  I'm using the example provided with the driver for the function generator, the remote control works via GPIB, but I can't get the RS232 control.  Just, I'd work with control GPIB, but MKS 647 does not have a GPIB port, so I have to use the RS232 communication.

  Because I know that the drivers of function generator works, I did my RS232 test with the function generator.  I checked the parity, the flow rate in bauds and Bits of data to ensure that all they are and they do, however, every time I run the program I continually get error-1073807253 when you try to initialize the connection of VISA between the PC and the generating function.  I also get error:

  "VISA 0xBFFF0072 error code.
  The resource is valid, but VISA cannot currently access. »

  When you try to connect through NOR-MAX.

  I lived quite a few support forums and tried a lot of different solutions, but none have worked.  The only thing I have not tried is a new cable series, but I don't know exactly which one I need so I put off buying a new.

  I have attached the .vi I use and a picture of the .vi for quick reference. Ignore the error code in the picture, I do not have the function generator attached when I ran it.

  Anyone has any ideas on what could go wrong? Or could someone send me a link for the serial cable I should use (I need it to be female DB9 to USB)?

  
  

• HOWTO configure LabVIEW with MKS Source

  Configuring LabVIEW to work with MKS 2007 Source?

  I solved my problem:

  Error-2901; The registry entry is missing or incorrect.

  [HKEY_LOCAL_MACHINE\SOFTWARE\Mortice Kern Systems\Integrations\SCC\IDEs\National Instruments LabVIEW] "DllName"="use base" "IDESccName" = "National Instruments LabVIEW"

  Error-2902;
  (a) the name of the project in LabVIEW must be identical to that of MKS.

  (b) the Local project Path MUST contain a project.pj for example the sandbox should be created.

• "Unable to connect to MKS" when connecting to the virtual machine shared

  Hello

  I have a handful of Shared VMs Im trying to access remotely with VMware Workstation Pro 12 (same version on the client and the host - two Windows 10 machines). I am able to connect to the host that shares virtual machines, I can see all the virtual machines shared, open the virtual machine (as in it opens in a tab within the workstation) and virtually no action on the virtual machine including all power options, instant, change settings, etc.. The problem is that if I turn on a virtual computer (or connect to an existing virtual machine under tension, I get the following error and Im not able to access the actual console since it remains as a black screen.

  Unable to connect to the MKS: (name of user and password) Login incorrect.

  I also noticed that on the client Windows Event Viewer is to launch the following warning events at the same time that the error in the Workstation has been lifted - Im not seeing any on the host are thrown.

  

  

  I've seen a lot of posts here with users who run the question and he usually ended up being a network problem. I turned off the Windows Firewall on both machines, checked ports 443 and 902 listening on the host and Im in telnet from the client to the host on port 902. I also saw another suggestion for updating the client Windows hosts file to include [host name] [IP address] and [FQDN of the host name] [ip address], but this subject seems not helped either.

  Suggestions in this regard does not happen what keeps or where to find more information about the cause?

  Thank you!

  Post edited by: Tim Graffam

  Thank you for using the workstation. I think that this will solve your problem.

  Unable to connect to the MKS: (name of user and password) Login incorrect