VSphere from VMware vCenter Server Web Access from the Internet

Similar Questions

• Vmware server Web Access 2 does not work

  Dear vmware community:

  First of all thank you for taking the time to read this.

  I have a problem that looks like this isn't the first time that this happens, Yes, I was still unable to find an adequate solution.

  We have vmware server 2 is installed on a Debian 5 machine. Until yesterday, it was working fine.

  Today, when I tried to access to via web browser as usual, the page not load (the browser would say 'done, but the name of the page says "Loading").

  We have one of the virtual machines that are configured to start automatically, and it does not work as expected. The other I can't handle because I can't have the vmrun run perhaps (related?). So far, the only things that doesn't seem to work is web access only.

  There is one thing to note: after a restart of the computer, or restart the vmware mgmt, the service called "VMware Virtual Infrastructure Web Access" would show anything (while other services say "done" at the end of each line).

  I saw other people with similar problems here, and generally the solution was to reinstall the vmware server all on this machine. I would avoid this of course.

  Did someone already experienced this? Where I can look for more information on the VMware VI Web Access service won't start not (I do not know where are stored the logs of this service, maybe that can help).

  Please let me know if I should add any information, such as newspapers, etc.

  Thank you in advance!

  Hello

  I would recommend you check carefully this post and this post another may also help.

  Have you checked the vmrun documentation? Take a look at the file that I downloaded on this post.

  I would like to know if one of my tips work for you (or not)

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog

• Compatibility of VMware vCenter Server 4 Foundation to vSphere with ESX 3 Standard VI

  We are already use VMware ESX Server 3.5 VI.

  Our intention is to buy VMware vCenter Server 4 Foundation for vSphere addition VI ESX 3.5 Server running on a separate server. Our concern is;

  1. is VMware vCenter Server 4 Foundation for backward compatible product vSphere with VMware ESX Server 3.5?

  2 If no, then is it a similar product of VMware, which is compatible with VMware ESX Server 3.5?

  Please notify.

  VMware vCenter Server Foundation 4.0 can handle up to 3 vSphere or legacy hosts.  If you need to manage more than 3 guests, you should definitely consider vCenter Server Standard edition.

  ESG-VMware

  VMware communities user moderator

• VMware vCenter Server Foundation supports 5 reviews?

  VMware vCenter Server Foundation supports 5 reviews?

  Yes the vCenter Foundation supports view5.

  Here is the difference between vCenter foundation and standard vCenter.

  VCenter Foundation: -.

  One instance of vCenter Foundation will support for smaller environments (up to 3 hosts vSphere). With the features that has with vSphere (ESXi5) license as standard, Enterprise & Enterprise +.

  vCenter Standard: -.

  Manages large-scale deployments of VMware vSphere (+ t0 1000 VMware ESX).

  Apart from the above, both are fully included for the license and ESXI (standard, Enterprise & Enterprise +).

  Check out the link for the difference in features between these editions below.

  http://www.VMware.com/products/Datacenter-Virtualization/vSphere/mid-size-and-enterprise-business/compare-editions.html

• VMware vCenter Server, 4.1.0: resources for customizing Windows were not on the server.

  By using the vSphere Client, I created a customization of comments with 'Virtual Machine OS target' = "Windows".

  Then I tried to deploy a virtual machine from a Windows model. In the model "deploy" dialog box, in the "Guest" Customization screen, the 'customize using an existing customization specification' is grayed out and disabled and I see the following warning:
  Resources of Windows customization on the server have not been found.
  Why am I unable to use the comments Windows customization that I created?
  I am running: VMware vCenter Server, 4.1.0 345043 on Windows Server 2008 R2
  According to the VMware Knowledge Base system, preparation tools are integrated into the Windows Server 2008 R2 operating system and do not have to be downloaded
  Can someone help me solve this problem?
  Thank you

  Hello

  You can find the deploy.cab 2003 here: http://www.microsoft.com/download/en/details.aspx?id=23096

  XP here: http://www.microsoft.com/download/en/details.aspx?id=11282

  You must copy sysprep (extracts from the .cab) files on c:/programData/VMware/VMware VirtualCenter sysprep / (os)

  Concerning

  Stéphane Grimbuhler

  Senior consultant virtualization & storage (VCP / VCAP-DCA)

  VMware instructor (VCI)

• Difference between Standalone Converter and converter integrated with VMware vCenter Server?

  What is the difference between Standalone Converter and converter integrated with VMware vCenter Server, except that it comes integrated with Vcenter and another does not?
  Please confirm is there the technical differences between them?

  Also take a look at the Release Notes for vCenter Server 4.1.

  of http://www.vmware.com/support/vsphere4/doc/vsp_esx41_vc41_rel_notes.html

  VMware vCenter Converter plugin. VMware vSphere 4.1 and later versions of the update and patch are the latest editions of the VMware vCenter Converter plugin for vSphere Client. VMware will continue to update and support the free Converter Standalone product, which allows conversions from sources such as physical machines, machine formats virtual VMware and Microsoft and some third-party disk image formats.

  André

• A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\VMware vCenter Server Appliance.

  Hello gentlemen,

  I can not only save this virtual machine with Backup Exec 2014 for a long time.

  They are there was no snapshot in snapshot Manager.

  Could you help me?

  A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\VMware vCenter Server Appliance.

  V-79-57344-38260 - failed to create a snapshot of the virtual machine. The virtual machine is no longer exist, or may be too busy to pause to take the snap.

  A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\FRPA111PRIM01.

  V-79-57344-38299-\vm\FRPA111PRIM01 ha-data center (DC) VMVCB::\\192.168.204.42\VCGuestVm\ (DC). To try to take a snapshot of a virtual machine failed because it could not be suspended in a file system.

  Hello

  I found the solution.

  I disabled the JOB BE general relativity.

  and the host where the virtual machine belong was not the right time. No Ntp server has been configured.

  I did and now there works.

  I think that the problem can come from this.

• I did a stupid thing: I suspended "vmware vCenter Server Appliance" and now I can't connect to it more

  Hello

  First some info on our system. We have a group of three hypervisors and a few terabytes of storage on two devices of Synology. VCenter Server allows us to control everything. This vCenter is accessible via a dedicated ip address. Then I opened my 5.5 vSphere client on my workstation, check the name and credentials of the vCenter and hup I can admin everything.

  Now, what I did with my sleepy head? I suspended the so-called "unit of vmware vcenter server. And my vsphere client lost my connection with the server vCenter Server immediately.

  I can't ping this address ip-plus.

  I'm afraid that ssh is disabled.

  Installed on virtual machines seemed well-oiled, I can access it by using RDP. So no worries for employees using them.

  So I would like to be able to restart this device "vmware vcenter server" but I don't know how to do it.

  All useful ideas would be nice.

  And Yes, it's a really stupid mistake.

  Thank you

  Paul

  Point your client vSphere host your vCenter ON VM's.  You can then start the VM vCenter.

• Activate the VCA Mode of VMware vCenter Server Appliance

  Hello

  I'm pretty new on vSphere.  I have two hosts running esxi 5.1 what one of these hosts running the "VMware vCenter Server Appliance' with vSphere version 5.5.  I currently have a single cluster containing all the VMS as well hosts and the SAN.

  I try to activate the EVC mode, but when I try it tells me that the host is not allowed because there are powered on virtual machines.  I can turn off all the virtual machines except the vCenter device and I still get the problem on the host that has the device on it.  If I turn off the unit, I can't use vSphere to activate CVS.

  How can I activate CVS when vSphere does not work?

  Thank you

  Jeff

  Hi Welcome to the communities,

  This one is a bit complicated

  You have:

  1. turn off all VMs on Host1 (while vCenter device is on Host2)

  2 bring Host1 on Cluster, select CVS clustered.

  3. put all the virtual machines on Host2 (also vCenter device)

  4. connect on Host2 directly to vSphere Client Windows

  5. remove the vCenter inventory unit

  6. connect on Host1 directly to vSphere Client Windows

  7. the data store when the appliance and add it to the inventory of research. Power on

  8. connect the device with Web client or vSphere vCenter

  9. move the second host in the cluster

  And you're done

  Concerning

  Tim

• VMWare vCenter Server Appliance / 2012R2 Windows domain

  Hi all
  I've recently updated my domaincontrollers to R2 2012 WIndows, and I installed vCenter on a vm through the ovf appliance. After you have configured the vCenter in the web gui, I can join the domain successfully and the virtual center appears in the field. After a restart of the virtualcenter, I'm not able to find the field in the client to vcenter under permissions. (version vCenter: VMware-vCenter-Server-Appliance-5.5.0.5101-1398493)

  Someone at - it a tip on how to fix this?

  You must login to webclient using [email protected] and navigate to the SSO configuration. Select your ad that you added and make this default domain. This makes the announcement should appear in the menu drop-down.

• How does VMware vCenter Server Heartbeat communicate?

  How does VMware vCenter Server Heartbeat communicate?

  VMware vCenter Server Heartbeat supports configurations of single NIC or multi.

  Public IP address: this IP address is used by a client to connect to an Active Server, and move between the secondary and primary servers in the case of a failover or a passage.

  IP address of the channel: this is for communication between active and passive servers. This is used for the transfer of control and an asset to the passive server data and monitoring the State of an Active Server.

  In a LARGE network, static routes are used on switches to maintain ongoing communication.

  Management IP address: this address is used to access servers in a passive role. In a multi NETWORK card configuration, a NIC will have IP addresses public and management, and an another aura NIC IP address of channel. In a single NETWORK adapter configuration, all IP addresses are on the same network adapter.

• VMware vCenter Server 5 Essentials for vSphe

  Ho una licenza VMware vCenter Server 5 Essentials for vSphere labor-intensive. Devo aggiornare UN host currently che ha una licenza di free vmware 5.

  -Posso installare versione 5.5U2 e usare the licenza in oggetto?

  -Can I download ed installare versione 5.5U2 o devo partire dalla 5.5?

  Grazie. Gianni

  Se you want to upgrade an ESXi 6 prima di tutto verificare che devi he tuo sia nella HCL di VMware Server: VMware Compatibility Guide: search system, check all the components, BIOS e controller compresi. SE aggiorni an ESXi 6 you attiva una versione 60 giorni di Enterprise Plus trial. In the meantime fai della licenza Upgrade alla versione 6 (to hai active UN contratto di supporto e following) e enter it shows.

  ISP attenzione durante aggiornamento, clear no I locali datastore: http://pubs.vmware.com/vsphere-60/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-60-upgrade-guide.pdf

• VMware vCenter Server Appliance 5.5 Active Directory domain are not under permissions

  Hey,.

  I use VMware vCenter Server Appliance 5.5.

  All Services are running correctly:

  

  I configured tge under authentication to Active Directory Service:

  

  But when I try to give permissions for groups and users to the AD.

  But it is not listed in the vsphere Client and WebGUI

  

  

  Can someone help me solve this problem?

  Are there any newspaper I can verify or any idea to check this?

  You will need to go to your SSO Configuration and set your ad as default domain.

  

  Once you do this, it will be displayed in the list.

• Can of POS used with Vmware vCenter Server 5 Standard license

  Hello team,

  Accroding to http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2016565

  WTP is supplied with vSphere Essentials more and more.

  I searched but did not meet solid information where he explains when licensed some don't need us to buy additional licenses for new features / applications, etc.
  I'm new to Vmware licenses hierarchy. We have Vmware vCenter Server Standard 5 license.
  Please point me to a URL that contains the hierarchy of Vmware licenses .

  Thank you much in advance.
  Niraj

  You can use vCenter Server Standard 5 licenses for POS. Everything we have features such as (profile of HA, DRS, FT, VDP, host, DVS etc.) you don't need to worry about the virtual server license Center. You must use the correct license vsphere host. But don't forget to think about some virtual server edition Center can handle some vsphere hosts.

  vCenter server 5 Essentials can manage only vSphere Essentials Plus or vSphere Essentials.

  vCenter Server Standard 5 licensecan eat only vSphere vSphere Enterprise and vSphere companies plus standards.

  You can activate the functionality of POS with vSphere Essentials Plus then you will need to use vCenter server 5 Essentials.If you use vCenter server standard for vSphere Essentials Plus so it give error or warning for violation of editing.

  Thank you

  Atul

• VMware vCenter Server able work on linux?

  Hi all

  I can't make pile or face of ESX documentation, there is no direct answers.

  It is possible to run VMware vCenter Server on the linux host? everywhere I see just winNT and XP support... in our environment is only the linux hosts and one or two win7 for running vSphere client...

  Is there a solution without throwing me money buy windows XP?

  Kind regards

  Vlad.
  

  vCenter Server is only available as a Windows application, you need at least Windows XP Pro 64-bit to run the latest version of vCenter Server (4.1). See http://www.vmware.com/pdf/vsphere4/r40/vsp_compatibility_matrix.pdf (compatibility of OS for vSphere Client, vCenter Server...)

  EPI