Error msiytb32.dll when I restart my laptop

Similar Questions

• Recently, when I restart my laptop (dell), I see this error: __Windows (rundll32) host process has stopped working__I do not have this problem since 2 months ago__

  Recently, when I restart my laptop (dell), I see this error:

  Host process Windows (rundll32) has stopped working

  I don't have this problem since 2 months ago

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  What is rundll32.exe and why it works?
  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

  What is the suspicious Rundll32.exe process?
  http://WindowsXP.MVPs.org/Rundll32.htm

  -----------------------------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------

  If no joy trying to determine what is the cause:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.

  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, product name, file Version, company name, location
  in the registry or file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• 3 rundll errors appear every time I restart my laptop

  Hello

  When I restart the laptop, I get the RunDLL 3 error messages. They do not seem to affect the performance of the computer, but they must mean something. If I need, where can I get the new?

  Descriptions of the errors are...

  RunDLL
  THERE WAS A PROBLEM STARTING
  C:\USERS\IKKATUN\APPDATA\ROAMING\deapui.dll
  THE SPECIFIED MODULE COULD NOT BE FOUND

  RunDLL
  THERE WAS A PROBLEM STARTING
  C:\USERS\IKKATUN\APPDATA\ROAMING\rsprt.dll
  C:\USERS\IKKATUN\APPDATA\ROAMING\rsprt.dll IS NOT a VALID WIN32 APPLICATION

  RunDLL
  THERE WAS A PROBLEM STARTING
  C:\USERS\IKKATUN\APPDATA\ROAMING\LOCAL\ATHEROS\ARCSOFT\nawrztoff.dll
  C:\USERS\IKKATUN\APPDATA\ROAMING\LOCAL\ATHEROS\ARCSOFT\nawrztoff.dll IS NOT a VALID WIN32 APPLICATION

  I am running Windows 7.

  Please think!

  Thanks in advance!

  Looking for errors like this by doing a search on Google for the name of the file.  Usually, they turn up without success.

  When a search in no hits or suspicious hits result, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.

  First of all, download, install, update and run full scans with two of these free analytical tools:

  MalwareBytes AntiMalware
  SUPERAntiSpyware

  Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

  If the scans does not solve the problem (and they can't, because the actual malware file has already been processed), then download and run Autoruns.  Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."

  Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box.  The latter prevents the line running, but you can reactivate later by replacing the checkmark.

• Sometimes when I restart my laptop I get this message: "no operating system found".

  What should I do? I have only windows vista on my laptop and my system is clean and working properly.

  Why I not get that?

  After you receive this message, I press ctrl + alt + del then starts normally.

  Hello

  This problem may occur for a few reasons.
  (1) hard disk cannot be read sometimes... maybe there are errors on the disc that 'may' be fix by running a utility or two.
  (Open the computer and right click on the C drive and select Properties. Click on the Tools tab, and then click check now in the error-checking box.
  You can also use the tool to defrag as well. It takes some time so do it when you don't need to do much.
  You can also run the check disk from the command prompt. Click on START and type > order > press ENTER.
  Type > chkdsk C: /f > press enter

  Just a test to see if the problem happens again.

  2) there is an intermittent problem with your hard drive.
  Hard drive might be close to going out. You may need to get a new drive. You can make a backup of the system and restore to the new drive... IF that is the question.
  It could be the drive is simply 'loose' and needs to be reset. Should be just one or a few screws to remove the disc. Simply plug in the back and see if that was the issue.

  (3) the controller card has problems. It is bad on a laptop, because it would require a new motherboard... sending essentially to a store. If this would be probably covered under warranty.

  The first option would certainly test carefully. If that does not do it, make sure that the disc is properly seated to make usre is not easy like that.

  By all means, save all the files that you need to keep.

  I hope this helps. Mark <> Microsoft Partner

• Error Isdone.dll when you try to play the game of FEAR 3

  Original title:

  I get an IsDone.dll error when I try to play my game Fear3. How can I get rid of him?

  Hello

  1. is the issue specific to this game?

  2. are you aware of any changes made to the computer, before the show?

  3. What is the exact error message?

  4. when exactly do you get this error (for example at the launch of the game, the game or at random times)?

  Method 1:

  Perform a clean boot and check for the issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.

  Method 2:

  An analysis of auditor of system files on your computer.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  It will be useful.

• Error 90 b when startup on computer laptop g62

  I recently did not use my computer for several days. I started it upward and then made a few hw and shut down. The next time I went to the Tower on I got and error 90 b. I already disassembled and cleaned the fan, but I still receive the message. The fan works from time to time, but stop just at random. What can do fix a question?

  It looks like the fan is a failure, that is, the fan is dying.

  You can try...

  After checking the fan is clean,

  It is recommended that you try a Hard Reset to this problem.

  Depending on the cause of the failure, it may solve the problem.

  Hard Reset allows you to solve problems of software and hardware

  Another document on the subject covers what you did - take a look to make sure you don't miss anything:

  The fan runs constantly, the PC is running more slowly than expected and generates heat .

  ==================================================================================

  You cannot run the computer without a fan, at least not for very long.  The laptop turns off to protect against catastrophic damage (severe).

  You must address this problem.  This means that you should at least replace the fan, assuming that it is the central point of failure.

  The exact solution depends on the root cause.  You must either risk yourself, take the computer to a repair shop that you trust, or call HP and ask them to fix it for you.

  Contact HP

  Good luck.  I hope that you get your laptop fixed.

• Windows 7 slow log process when you restart

  I have a HP Pavilion dv4-2049wm with Windows 7 sp1... I recently sent my laptop to be fixed through the guarantee thanks to a 2-year extended service plan that expired recently after that she came back to me. He was sent because the backlight has went out on the LCD screen. When I noticed that my volume and wifi touch buttons have been blackened and not working and also my LCD display wouldn't go to sleep when I closed the top of the page despite all my settings to tell. I had to reinstall my display drivers and I have also flashed my BIOS, Insyde F.18. Everything worked fine, but no fixed... now when I restart my laptop, windows is going to close, it is spin the circle beside logging off... He will sit like that for an hour and does not restart because he can't get out of logging off windows process restart, so I am forced to stop by pressing the power button. Anyone know of any solution to the problem of sleep and restart the problem? Or have any suggestions I can try? Thanks, any help would be appreciated!

  Hi Teytey,

  Two ideas:

  Wrong program:

   

  Looks like a program is blocked running and is not able to pay attention to the "cease and desist" message Stop message sending when you try to shut down the computer.

  Computer keeps (Windows 7 or Vista)

  When the programs will block this way, they are not working properly or in a State where they can be stopped by normal means.  They "cannot hear' instructions from the outside as they can be in a loop of the code that does not include an exit door, or a way to listen to instruction to stop going"round in circles.  This can be causes by stupid code or by errors in the file system.

  What can you do?  You can take a look at what is currently running on the computer and to take preventive measures, i.e. control what is running on the computer and get rid of it, advance - before it's time for you to shut down the computer.

  What program is causing the problem?  Unknown.  You will have to do some detective work.

  =====================================================================================

  An hour before today:

   

  You can also try to "back in time" when it was not the case.  This could be possible if the situation of error developed after you have installed the new software, after you have changed something important on the computer, or after updates have been applied by the system.  In all these cases, a Restore Point can have been created, in which case you can track a time 'before this date' and sometimes to recover your computer Setup and the ability to start and stop down, as expected.

  • Do NOT, DO NOT confuse restore with recovery.  Restoring is a set to a 'time before today. '
  • Recovery is a destructive wipe of data and a resinstall on your operating system.

  How to use Restore:

  HP Notebook PC - using Microsoft System Restore (Windows Vista)

  Restore Windows to an earlier Point (Windows 7)

  Computers HP - using Microsoft System Restore (Windows 8)

  Reference

  Implementation of restoration and System Restore Points:

  Before making any changes on your computer, you can ensure that you have a Restore Point.  If things go on the side, you can "go back".  It's the system restore.  Once you have enabled the restoration of the system, the computer will automatically restore Points before many program facilities.

  You can also create a manually restore Point.

  Be sure to only restore the Protection is enabled for the drive C:\

  AND

  Control Panel > display icon > system > System Protection > create a Restore Point

  =================================================================

  Safe Mode system restore:

  • Turn off the laptop completely.
  • Restarting...  As soon as the laptop starts to boot,
  • Keep clicking on F8 until you enter the Windows Recovery Console
  • Find and select "Safe Mode" > enter

  Once the system starts in Mode safe:

  Start > search / type 'restore' > click to open "System Restore."

  Select a Restore Point PRIOR to the point where the problem started and to restore.

  ====================================================================================

  I hope this helps.

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

  See a Post that is useful - or who teaches you something you didn't know?

  Your HP Experts strive to help.

  Click on the star of congratulations!  It's a big 'thanks' for the author.

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

• HP Pavilion g6: failure to restart my laptop.

  When I restarted the laptop mt that he was unable to restart instead I got a message saying "failed to configure windows update changes recovery do not turn off the computer. So I left it on overnight. Wake up the same message was on the screen so I turned it off. The turn it on again the same message appeared, and he was slaughtered like that for 2 days now. I can't access anything from my laptop because it refuses to restart it becomes just stuck on this message with a symbol of loading next to him. Help, please.

  Hi @Noura07,

  Welcome to the HP Forums!

  This is a dynamite place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I understand that you restart your laptop, you have received a message saying "failed to configure Windows update, coming back from changes. Not turn off not computer.  You left it on the error remained all night. You rebooted your laptop, but the error remained.

  I would try a reset hard or forced.   HP Notebook PCs - performing a Hard Reset or forced Reset.

  If the error should always stay I suggest you do a refresh.    Computers HP - refresh your PC to solve problems (Windows 8)

  This will reinstall Windows 8 and should not affect your files.

  If an update did not help, then a recovery is the next step.

  HP computers - performing a recovery of HP (Windows 8) system

  During the recovery, there is an option to backup your personal data to prevent loss. If you do not do that I suggest that one now.

  HP computers - restore files that have been supported to the top using HP Recovery Manager (Windows 8)

  To show his gratitude for you answer please click the thumbs up below.

  If this helped you solve your problem please choose solution provided in order to help others.

  Good luck!

• Network printer stops working after restarting the laptop

  I have 2 PCs both running windows Vista. A PC is a desktop computer ACER with a printer connected to a USB Port (HP Photosmart C4480). The 2nd PC is an ACER laptop also on windows Vista. I have a network home and print away from the laptop. Problem is when I restart the laptop I can't print remotely and do are Add' the printer again. Print spooling is nec automatic and active. I have downloaded the latest drivers HP for the printer. Just a note to say that ACER laptop my son who works in XP does not have this problem and can print after a reboot.

  Hi GaryPolaris and thanks for the answer.

  What is the brand and model of your printer? Have you checked to see if the printer is compatible with Vista? You can check this in the Vista Compatibility Center located at this URL http://www.microsoft.com/windows/compatibility/ . Also, you can try installing the Vista drivers on the XP machine. If the manufacturer has released Vista drivers simply download and install the drivers on your XP machine.

  I hope this helps. Please post back and let us know if it did or did not solve your problem.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• RtClick STARTUP error 'shellext.dll.

  After doing a restore to get rid of an AcronisTrueImage facility that wouldn't uninstall, I now get an error 'shellext.dll' when I click with the right button on START or click with the right button on a desktop icon. When the error occurs, I click OK 4 x times and then am able to proceed as usual with the function right-click that initially, I tried to access.

  shellext.dll "Error loading signing XML from Sigs.Xml"

  Download http://www.nirsoft.net/utils/shexview.html
  Disable all non-microsoft shell extensions (to explore) and reactivate a
  by so this can help.

  --
  ..
  --
  "GARYINAUST" wrote in message news: d7653bf4-c77b-4df6-8594-5e36c4dfc3c6...
  > After doing a restore to get rid of an AcronisTrueImage installation
  > which would not uninstall, I now get an error "shellext.dll" when I have the right
  > Click START, or right-click on an icon on the desktop. When the error occurs I
  > 4 x times on OK and then am able to proceed as usual with the right
  > click on home, I tried to access the function.
  >
  > shellext.dll "error loading signing XML from Sigs.Xml.
  >

• When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".

  When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• the "uncdms.dll" error when I restart my computer. How can I fix?

  the "uncdms.dll" error when I restart my computer. How can I fix?

  The file belongs to the software Windows Desktop Search. If you use it, you can uninstall it from Add/Remove programs. If you use it (even if I think it's pretty awful), uninstall and then reinstall. MS - MVP - Elephant Boy computers - don't panic!

• I'm getting dll error when I restart my pc too when I restarts it always starts in safe mode

  whenever I turned off my computer it restarts in safe mode, I have to continuously press F8 to get to the normal charging... Once finished charging then I get the error '' run DLL' "cxrvqpb.dll"... " I ran my virus, malware and anti several times but it doesn't show any problems... not computer Savoy very so any help would be greatly appreciated

  Sounds like remnants of malware. Go to start/run type msconfig. Look under the Startup tab to find this entry uncheck the box

• Error loading C:windows\mstapox.dll, when you start Windows XP

  Originsal title: error loading

  When starting, I get the following message: error loading C:windows\mstapox.dll

  Does anyone have a solution?

  There is no file with this name in XP.

  In addition, there very few dll that must be load in the c:\windows folder and is not one of them.

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  If that's really what you see, then your system is now or was hit by malware.

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024. Restart gave a different stop error message: 0 x 00000050.

  Original title: Blue screen problems - Stop 0 x 24 and 0 x 50

  I'm not being updated hardware or software on my Dell Latitude D8380.

  I ran the Windows tool to check if the laptop is suitable for upgrading to Windows 7, but did not install any software.

  I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024 (0x001902fe, oxba4f7948, 0xba4f7644, 0xb9d31ae8) ntfs.sys address b9d31ae8 base at bpcef000, datestamp h8025be5.

  Restart gave a different stop error message: 0 x 00000050(0xffffffff,0x00000000,0xba1bef42,0x00000000) i8042prt.sys address ba1bef42 base at ba1b8000, date stamp 48025c 67.

  Please can you help. Thank you, Sue Dixon

  Hello

  Step 1: Check if you are able to boot in safe mode. If you are able to boot into safe mode, and then try to perform the clean boot to safe mode and check.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Run the check disk hard disk command. (You will be able to try this step if you are able to start in safe mode or in normal mode with success)

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Let us know the status of the issue.