Error "no message from the past two weeks and all old messages over two weeks are lost" trying to open hotmail in the Mail application.

Similar Questions

• Cannot send emails from the Mail application, error "Email is unavailable check with provider.

  Original title: the application of mail outlook windows 8 does not work on my windows PC 8.

  Dear anyone who can help,

  The WINDOWS for OUTLOOK MAIL APP is sending emails problems. I try to send an email, but he finds himself stuck in my Outbox, and follows an error message telling me to "CHECK WITH MY SUPPLIER."

  "" "I noticed he says 'myemailaddress@Outlook ' is not available", but I can't work out why. Is this a problem at the end of servers or mine?

  It was working fine before and had there is a little more than two weeks, when the error occurred. (I don't know exactly, because I've been away)

  I have no other synchronized e-mails (Gmail for example) it is only the account of a main outlook that I use to manage everything on my PC.

  Logging in to my email online via Chrome etc. address works fine to send and receive e-mails. THE APP IS THE PROBLAMATIC

  There only seems to be a lot of information on this issue (a few messages from 2013) so I want to know if it's just me and finally how to solve the problem.

  Help, please! Thank you!

  Hello

  Please contact Microsoft Community. I understand that you are unable to send emails from the Mail application. I've surely you will help solve this problem.

  This problem might have occurred because of these reasons:

  1. App is not updated.
  2. App is corrupt.

  Try the steps listed here and see if it helps:

  Method 1:
  We will run the troubleshooter app and check if it helps.
  Solving the problems of the app

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article that will help identify and correct common problems of App.

  Solve problems with a soft
  http://Windows.Microsoft.com/en-in/Windows-8/what-troubleshoot-problems-app

  Note:
  1. try all the steps except convenience store App and those that you have already tried.

  2. apply to Windows 8.

  See the article for more information.

  Messaging app for Windows
  http://Windows.Microsoft.com/en-us/Windows-8/mail-app-tutorial

  Note: Applies to Windows 8.

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• How to disconnect from the Mail application built into Windows 8 Pro

  I think that this old question / thread has been neglected (closed) and went without a good answer.

  Citing the answer of the moderator of this thread.
  "

  Hey jayRads,

  There is no concept sign in email and applications on the Preview version of consumer Messaging. If applications use the credentials you entered in your Windows profile, you will need to disconnect your account under settings of the PC users.

  -Isabelle '.
  and we know that this is not a real answer to the question.

  Since I only have a Local account signed in Windows 8... and when I click on the mail and forced me to Sign In (add account MS)... There should be a disconnect somewhere after I entered my hotmail account. Logically faulty if there is really nowhere to disconnect my hotmail. Even used Credential Manager/ne shows not my signed in accounts.

  NOTE: All I can do is to remove all accounts from the e-mail settings, but it affects all applications (Messaging, people, etc.) which usually isn't my idea of disconnection from Mail only. :(

  I want to just sign out since the Mail application (will also apply to applications that require a signature in) is possible.

  Please enlighten me in this situation.

  Thank you
  Ferdie

  Hi Ferdie Miranda,

  Thank you for choosing windows 8 and we join on our community.

  I understand from the description of the problems, you want to know the way to disconnect from the Mail application in Windows 8.

  Windows 8 Mail app has been designed so that it will keep you in connected mode all the time so that you will be able to check your e-mail without connecting to the Web-based e-mail.

  The steps in the thread you mentioned are quite correct.

  If you want to disconnect, please delete your account.

  For more information related to windows, feel free to join us anytime.

• Cannot send attachments photo from the mail application, error: contact service provider

  Original title: Windows 8 will not send message with attached photo using the mail application.

  Whenever I try to send a message with attached photos, it does not.  I get an error message telling me to contact my ISP.  What could be wrong?

  Hi Alex,

  This problem may occur because of in-correct settings in the Mail application.

  Please help me with the following information related to this issue:

  1. E-mail account which you added to the mail application? What is Outlook.com/Hotmail, Yahoo or Gmail?
  2. This problem is specific to a particular attachment? If so, what is the file size of the attachment?
  3. Are you able to successfully send an e-mail without attachments?

  Try to access your e-mail account via web browser and try to send mail with attached photos and check the status.

  If you are able to send mail via webmail, no doubt the issue could be with the mail application.

  I suggest you to run the troubleshooter of app. The apps store is an automated tool that we have developed to deal with a number of known issues that may prevent applications from running correctly. This troubleshooting automatically solves some issues including the suboptimal screen resolution, incorrect security or account etc. settings. You can click this link to download and run the utility of troubleshooting Apps.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Please answer us on the State of the question as well as the information required to help you further.

• What Contacts are used when send the email from the Mail application?

  I have a sky email Yahoo where all my contacts are available.     I use the people App where my contacts are available.   When I want to send an email using the Mail (which is related to my emails from sky) application, then all my contacts don't EXIST - why.

  Will you please explain in simple language please because I'm not technical interest

  OT: Contacts

  Hello

  I suggest you try the steps from the following link to import the Sky email account contacts.

  Add, import and export of contacts
  http://help.sky.com/email/managing-your-contacts/adding-importing-and-exporting-contacts

  To further support on behalf of heaven, I suggest you show in sky support forums.
  http://helpforum.sky.com/T5/sky-Yahoo-mail/BD-p/emailsandtools

  I hope this helps.

• A fatal error occurred when attempting to access the SSL server credential private key. The error code returned from the cryptographic module is 0x8009030D. The internal error state is 10001.

  Hello

  I just bought an HP computer, Windows 8 Pro, x64bit. I worked OK for a week and then started to freeze. It freezes all the time. I'll send the error message in the event log. I'd appreciate your help because I've had enough of this gel and I turn it works all the time.

  Log name: System
  Source: Schannel
  Date: 12/07/2013-12:55:12
  Event ID: 36870
  Task category: no
  Level: error
  Keywords:
  User: SYSTEM
  Computer: Aleksey
  Description:
  A fatal error occurred when attempting to access the SSL server credential private key. The error code returned from the cryptographic module is 0x8009030D. The internal error state is 10001.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      36870
      0
      2
      0
      0
      0 x 8000000000000000
     
      7179
     
     
      System
      Aleksey
     
   
   
      Server
      0x8009030d
      10001
   
  

  Thank you

  Hi Aleksey,

  I appreciate the efforts that you put to publish the query on this forum.

  Please help me with the following information about this issue:

  (1) is the computer that is connected to a domain network?

  (2) when exactly you receive the error message? It is by accessing any application?

  If the computer is connected to a domain network, I suggest you send the request on 8 Windows IT Pro. Check out the link:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

  Please let us know if the computer is not in a domain. We will be happy to help you come.

• Question ESXi 5.5 with turn a virtual computer: "an error was received from the ESX host turning on VM" '22 (Invalid argument)"'DiskEarly on a power Module failed.'

  Here's what happens when you try to turn it on one of my virtual machines (see also accessories):

  Error stack:

  An error was received from the ESX host turning on VM vzilla-ws2012r2e.

  Unable to start the virtual machine.

  Cannot open disk ' / vmfs/volumes/51286ca4-ef967828-664d-001b2129ad71/vzilla-ws2012r2e/vzilla-ws2012r2e_3.vmdk ' or one of the snapshot disks it depends on.

  22 (invalid argument)

  Power DiskEarly module has failed.

  Cannot open disk ' / vmfs/volumes/51286ca4-ef967828-664d-001b2129ad71/vzilla-ws2012r2e/vzilla-ws2012r2e_4.vmdk ' or one of the snapshot disks it depends on.

  22 (invalid argument)

  This circumstance may be linked to a sata cable issue, with the possibility of temporary loss of connectivity, which could result in data loss/corruption, I realize.  It is a laboratory box.  Especially say that the 2 VMDK he complains (trying to light) is both on the grounds of a single physical disk. Data, read and written to the speaker, since the problem are very good (which indicates the wiring problem was resolved, and the VMFS5 file system seems to be in good health).

  No photos.  No related clones.  Just a 2012 Windows Server based VM, with several drive letters in, with those underlying files VMDK residing on different stores of data VMFS5.  Implemented end (these drives aren't really so huge), but far from running out of physical space for the data either. Everything is working great for months, until today, trying to it turns on again.

  You are looking for:

  "Failure error disk beginning module lit" results in this article:

  error disk on start module failed

  which indicates the .lck files may be present.  It does not exist.

  Then upwards, of a variety of other items:

  Re: Unable to start the virtual machine: invalid argument on *-flat.vmdk

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1004232

  https://communities.VMware.com/message/search.jspa?peopleEnabled=true & userid = & ContainerType = & Container = & q = module + DiskEar...

  error disk on start module failed

  but alas, none of them seem to relate directly, or exactly.  My vmware.log file is attached below, as well as some screenshots of to show the structure of the unity of this virtual machine.  Hoping that this post proves fruitful, if anyone has had a similar situation.  The data at stake here are (mostly) redundant, but I would rather understand my way of it, in the case where it happens to me again, or can help others.  Many preferred rather than give up, reformat the VMFS and start again.

  Thank you!

  Good news, the best result I could hope. No data is lost. No corruption of the VMFS or NTFS don't drive in the virtual machine. Nice!  Saved me a few terabytes of data restoration and learned a little more on file system of troubleshooting along the way.

  It took a technician of VMware Service excellent, attentive, methodical remote 2 hours in a WebEx previously to resolve problems with these 2 files vmdk manually, because he found that there is a lock on them. I opened a request of Service (SR) # with VMware by following the instructions here:

  VMware KB: Cannot access certain files on a VMFS datastore

  To resolve this problem, apply for support from VMware Support and note this ID (1012036) Knowledge Base article in the description of the problem. For more information on the filing of a request for support, see How to submit a support request.

  I'll cover this saga and the exact process for collecting and downloading of newspapers, through to my TinkerTry.com, including the ride video.  I even captured much of the technical work that has been done. That said, it is true that little of the magic that was made to resurrect the metadata will remain a mystery, given that this piece is VMware.

  I'm ok with a bit of black box, considering how I'm happy that I got all my data, and time savings that the quick recovery represented.

  By clicking on the button "answer".

• Why have all my colors suddenly changed - from white to cream yellow and all the other colors in the same way?

  Why have all my colors suddenly changed - from white to cream yellow and all the other colors in the same way?

  This looks strangely like the good old 'false monitor via Windows Update profile'. If the selector of color shows the cream when it should be white, that's all.

  We won't know until the OP comes back with more information and perhaps a screenshot, but in the meantime (since I'm away from my main system) I can try to locate my standard screenshot of one of the countless other threads I posted it that...

  ah, it's here (last posted barely two weeks in Lightroom):

  

• Unflagged messages always appear under "Flagged" in the Mail application

  Even after I delete the messages indicator, they appear as "Flagged" in the Mail application. How can I remove them from "Flagged"? Please note that I don't want to delete them.

  Thank you very much. This has happened since April and comes to some messages.

  Retina MacbookPro 15 "beginning 2013

  10.11.6

  Mail application

  Hi, ale.schmidt!

  Thank you for using communities Support from Apple. After reading your post, I see that when you clear a flag to a message in Mail, they always appear in the box to the Flagged letters. I use the mail every day, so I know how it is important to be able to manage your messages, and I'd be happy to help you!

  The first thing I would say is to leave the Mail app following the instructions here: OS X El Capitan: Quit apps

  Once you have left the Mail app, press in and hold the SHIFT key on your keyboard. While now Shift click the Mail icon to open the application again. Check if the messages in question were removed from the mailbox Flagged.

  If you still see the messages there, try restarting your Mac by clicking on the menu  Apple in the upper left corner of your screen and selecting restart... from the menu drop down. Once the computer is back on, check if the messages are always under the Flagged mailbox.

  You can then start the computer in safe mode if the messages are always listed under Flagged. The following article will guide you through a startup in safe mode: try safe mode if your Mac does not start-up

  Although the title of this article does not exactly your question, it is always a good step to take. Safe mode works certain system checks during the startup process, and disables some software that may be causing a conflict. Once you have started in safe mode, check if the messages are always listed under Flagged.

  See you soon!

• Why do I receive emails from the mail administrator emails that I have not sent back.

  I get 100 emails from the mail administrator, Mailer-Daemon and the * address email is removed from the privacy * mail system error, default of delivery etc.

  How can I put a stop to this.  My mail is through Windows live mail.

  JO McMahon

  Hi Josephine,.

  Just to clarify... You're getting failure to deliver notices of the administrator for the emails that you do not send? Who would say that your account has been hacked or hijacked and used to spam fire. First things first, change your password to something random, with capital letters and numbers. Note this although if you remember!

• Cannot delete the email from the Mail app in Windows 8

  Original title: Mail will not delete.

  I have an email in my sent folder that will not delete.  How can I get rid of this thing?  It's already happened, & I'm finally rid of their by going unread mails & remove this way.  But it does not for the moment.  This thing WON'T go away!  Any ideas?

  Hi Gail,

  I'll be happy to help if you can provide the following information.

  (1) don't you try to delete the account Web based email?

  (2) is the specific question in any particular mail sent items?

  (3) that e-mail account is configured for the mail application?

  (4) do you get an error message when you try to delete the mail?

  Refer to the article below and see the step provided in the link given below to run convenience store apps.

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-in/Windows-8/what-troubleshoot-problems-app

  Please answer back with information to help you.

• iPhone cuts read the mail when you open the mail application and pushing new messages

  Everytime I open the mail application on my iPhone 6 (9.2.1) all my mail previously reading disappears as soon as it pushes new messages.

  I found no adjustment that deals already read the mail on my iphone.

  Any ideas? And no it's not because I'm opening mail on the server's desktop in outlook that I rarely use more except as archive. I usually open mail on my iPhone first.

  Please confirm that you are in the mailbox of all mailboxes and not the mailbox unread. To do this, up on the back of boxes button at the letters on the top.

• I changed my email online password and now I can't any message in the Mail application. How to upgrade the application Mail with my new password?

  I changed my gmail online password and now I can't any message in the Mail application. How to upgrade to the Mail application with the new password? I looked at the previous questions, and they were told to go to the preferences, accounts, then enter it in the password section. However, I can't find any password section.

  It would help enormously if you posted the OS you are using. 9.2.1 IOS has nothing to do with your MacBook Pro.

  In Mail, try to go to the window menu and choose connection doctor.

• I have an iPad2 version 9.2.1 from the music application only the apple logo appears and nothing happens...

  I have an iPad2 version 9.2.1 from the music application only the apple logo appears and nothing happens...

  I did a reboot, nothing has changed.

  so the music app is an application by default/standard, it cannot be removed or reloaded.

• The Inbox in the mail application does not all the messages that I can see through the Web browser

  I have a similar problem with the Mail application on Surface 2. Inbox does not all the messages that I can see through the Web browser. I chose E-mail download of any time in the account settings. But when it sync randomly takes messages in the Inbox to display. I uninstalled the app, restarted the Surface and again installed in the Windows store. But the problem remains. It's frustrating. I think the app is not fully developed.

  His works now. I did the sync and other things with no results. Then I noticed that my missing messages are somehow appearing in the file of the Newsletter. Then, I moved all the messages in the Newsletter folder in Inbox and unchecked it parameters. It's working now. There are apparently some bugs in the software that allows for the Newsletter to divert messages. In any case thanks for checking.