Error nv4_mini.sy_ while installing on the Satellite display driver

Similar Questions

• Error code: 80070103 while installing optional updates for Brother printer

  I have an optional update from Windows for my Brother, update storage software released in Scanner printer

  May 2009. Published March 5, 2013.

  I tried this option of Windows Update and after a few minutes of installing the update for the

  Brother printer and Scanner STC - 197C I get an error code: 80070103

  Windows Update has encountered an unknown error. I tried to update a few times and now I really need help with this.

  The answer can reply to my email address

  Hi André,.

  According to the description, I understand that you are getting an error code: 80070103 while installing optional updates for Brother printer on your Windows 7 machine. I will certainly help you get this fixed number.

  This problem can occur because of incorrect settings or services does not properly.

  I suggest you refer to the mentioned Microsoft articles below and check if this is useful:

  Windows Update error 80070103

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070103

   

  You receive error 0 x 80070103 when you use the Windows Update or Microsoft Update Web sites to install updates

  http://support.Microsoft.com/kb/952032

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Satellite P105 - cannot install the nVidia display driver

  I tried to complete the download several times for the nVidia Display Driver 9.7.5.4.

  First where installation is not complete citing «that this computer doesn't have the correct material...» ', then the Windows message came and said that "If this configuration is not completely successful click blabla" and I did.
  Now when I run the installation it always stops in the same place. But now it is said that * "Setup cannot be performed because this driver only works on Windows Vista, and is not Windows Vista. But the thing is I have Windows Vista! *

  Current display driver: Mobile Intel (r) Express ChipSet Family 945GM

  Laptop model: Satellite P105-S6177

  Operating system: Windows Vista 32-bit

  Hello

  > Current display driver: Mobile Intel (r) Express ChipSet Family 945GM
  And then you want to install a nVidia display driver?
  LOL :D

  I think that you can not install a nVidia display driver because your laptop is equipped with an Intel chipset and graphics card.
  You will never be able to install nVidia display driver and thus make the message that you do not have the correct material.

  Intel and nVidia graphics cards graphics cards are different things, so don't mix do not!
  Some P105 was equipped with nVidia cards and others with Intel card and it seems that you have an Intel card.

• customization error "Sysprep is not installed on the server of virtual center for the model you have selected.

  Hi all

  Need your help with customization of the script here is the steps I've done so far

  1.I have created a virtual machine with Windows XP Professional as the operating system installed VMware Tools / VMware view agent then I added the virtual machine to the domain and created a template called (winXPtemp)

  2. According to article http://www.VMware.com/support/VC/doc/c12prepcustomize.html#1030366 I downloaded the Q257813_w2k_spl_x86_en.exe and the same extract. I force my VC server find the path as mentioned in article

  C:\ [VirtualCenter_installation_directory]\resources\windows\sysprep\1.1 so copied the files extracted to the location C:\Program Files\VMware\Infrastructure\VirtualCenter Server\resources\windows

  3 then I copied and extracted the file \support\tools\deploy.cab on the windows 2003 CD and copied the sysprep files extracted to the following location on the VC Server

  C:\Documents and Settings\All Users\Application Data\VMware\VMware VirtualCenter\sysprep\xp

  4. After you have done that, I've created a script under customization script called "testsript".

  5 Note until now I have not created a pool of resources as requires it the deployment of only 4 VM on an ESX Server with script customization. The data store for the virtual machine is a 100 GB LUN from a 2050 of FAS of NetApp iSCSI

  6. now when I create an automatic pool when I select the script that I created in step 4, and then click then it gives me an error "Sysprep is not installed on the server of virtual center for the model you have selected. Sysprep on the server installation.

  Troubleshooting done by me:

  I have readded the VC Server Manager to view but it force worked

  Thanks in advance for your help

  Kind regards

  v

  If I remember correctly the location for XP should go to: C:\Documents and Settings\All Users\Application Data\VMware\VMware VirtualCenter\sysprep\xp

  For XP SP2 Sysprep files can be downloaded from the Microsoft site and are called

  Windows XP SP2 deployment tools

  The article you linked was VirtualCenter 1.x. Since you have given a version number of VirtualCenter I assumed it was 2.x or later.

  ----

• HA error "an error has occurred while setting up the HA Agent on the host" & "Failed to find host name" on the ESX host

  I had to reload of the two ESX 3.0.2 Server I have here.

  Now the I get a HA error "an error has occurred while setting up the HA Agent on the host" when try to reconfigure HA.

  I note also that the same host if console type 'hostname - a' I get "Failed to find host name"

  I still seem to migrate virtual machines, but clearly something is wrong somewhere, there DNS config file I can check, I already check ed the hosts file and I can ping everything using long DNS name and short host name.

  Or maybe there is dns service can I restart?

  Thank you

  If you are running ESX 3.0.x check/etc/FT_HOSTS

  You can also check http://kb.vmware.com/kb/1003691

• Dual-boot Windows XP is installed on the external hard drive

  My computer has Windows XP and Windows 7 installed. I added a hard drive with Windows XP is already installed on the computer.

  In order to access additional hard drive, I need to change the priority of the hard drive in the BIOS.

  Is it possible to add a boot option to the Boot Manager screen so that I can boot from the additional hard disk without modifying the BIOS settings?

  First of all, to the best of my knowledge you should not change anything in the bios to access the external drive.

  Second, if Xp has not been installed on the external hard drive while the drive is connected to the computer in question it will not be loaded. Simply, it does not work like that. Even if you install Windows on the outside when it is connected to your computer, I don't think it must configure the boot.ini file, giving you the ability to dual boot when the computer is turned on. You can boot from the external drive provided however your bios supports booting from a usb key. I think that to accomplish what you want, you will need to remove the hard drive of the external envelope and attach it to your computer using an eSATA cable. Then it will be recognized as a regular system disk.

• I get the following error on my windows XP pc _ "ialmrnt5 display driver stopped working properly" my police doing real big and I have to restart my PC

  I get the error message on my Windows XP pc
  "ialmrnt5 display driver stopped working properly" my police doing real big and I have to restart my PC

  How can I solve this problem?

  What do you do when this happens?

  You can try to find an updated driver and then update your driver to determine if it solves your problem.

  Take a look at this article by Intel: http://www.intel.com/support/graphics/sb/CS-009483.htm

• How do I know if ESXi 4 OS installed on the local hard drive or SAN?

  Hello

  As above, how can I know if ESXi 4 OS installed on the local hard drive or SAN? average is ESXi SAN hard drive boot?

  Thank you

  The output looks like that ESXi is installed on the local disk (vmhba0).

      1 root     root       146778685440 Jul  8 11:16 mpx.vmhba0:C0:T0:L0
      119 917504 -rw-------    1 root     root          939524096 Jul  8 11:16 mpx.vmhba0:C0:T0:L0:1
      121 4193280 -rw-------    1 root     root         4293918720 Jul  8 11:16 mpx.vmhba0:C0:T0:L0:2
      123 138223680 -rw-------    1 root     root       141541048320 Jul  8 11:16 mpx.vmhba0:C0:T0:L0:3
      125 4080 -rw-------    1 root     root            4177920 Jul  8 11:16 mpx.vmhba0:C0:T0:L0:4
      127 255984 -rw-------    1 root     root          262127616 Jul  8 11:16 mpx.vmhba0:C0:T0:L0:5
      129 255984 -rw-------    1 root     root          262127616 Jul  8 11:16 mpx.vmhba0:C0:T0:L0:6
      131 112624 -rw-------    1 root     root          115326976 Jul  8 11:16 mpx.vmhba0:C0:T0:L0:7
      133 292848 -rw-------    1 root     root          299876352 Jul  8 11:16 mpx.vmhba0:C0:T0:L0:8
  

  Sizes, looks like you are using 2x146GB hard drives in RAID1.

  BTW. ls-lisa and fdisk-lu are two separate commands.

  André

• "the igxprd32 display driver has stopped working normally please restart your computer" on intel gma 3150

  "the igxprd32 display driver has stopped working normally please restart your computer" on intel gma 3150, especially when I run 3d games or install Skype 5 and start on this video than the above message appears please advise solution and oblidge. Thank you

  First of all, you're not telling the forum what version of Windows, edition and service pack level your system is running.  Please do.

  Secondly, there is no describe your system.  Tell us who makes your system and its model, if a packaged system.  If not packed, please tell us who manufactured your motherboard and model.  If your video card is another box and not originally shipped with the system, please tell us the manufacturer and model of the adapter.

  Finally and most importantly, please read 555375 Microsoft Knowledge base article, how to ask a question.

  Now, in general, unless your system has a card mother Intel®, you do not want to download an updated directly from Intel® driver.  If there is a system, you will want to download an update of the driver support from the manufacturer of your system model site.  If not packed, see web site for support of the manufacturer of the motherboard for your updated driver model.  If this isn't the case, a card mother Intel®, the reason for the not to load the Intel® GMA 3150 drivers from the web site Intel® is that there may be unhandled in the Inte® base drivers implementation changes.  Nor should download the drivers through Windows Update, except as a last resort.  If Windows Update contains an updated driver, check you motherboard of the system/website of the manufacturer for updates.  Be aware that some manufacturers/motherboard of the system (e.g. Dell) don't feel any economic incentive to keep the drivers/firmware to update if a motherboard system was abandoned.

  No member of this forum is omniscient!  Provide complete information leads directly to all the answers!

• Get the error code 80070103 while installing updates.

  Original title: this update does not work

  This update will not work even though I have tried allot Intel Corporation - storage controller - Intel (r) 7 Series Chipset Family SATA AHCI Controller

  He returns constantly with error code 80070103 Code and I do not understand the info on aid

  Thank you

  Hello Willukan,

  Welcome to Microsoft Community forum.

  If you receive error Windows Update 80070103 while installing updates, you are trying to install a driver is already installed on your computer or a driver that might be less compatible that you have already installed. To find more information please refer to the procedure described in the following article:

  Error 0 x 80070103 is displayed when you use Microsoft Update or Windows Update Web sites to install updates

  Hope that the information provided is useful. If the problem persists, get back to us with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Satellite L650 - 1 M 0 - cannot install the new display driver

  Hello!

  I have the Toshiba Satellite L650 - 1 M 0, and I can't install the new drivers for my graphics card: Mobility Radeon HD 5650 from the AMD website. Why can't I do it? I want to install the latest display drivers, because I have problems with the display mode. My laptop is set to 16:9, but some programs display in 4:3.

  Please give the latest drivers on the Toshiba site or tell me what can I do to download the drivers from the website of AMD. I have Windows 7 64 x;).

  > Why can't I do it?
  I m wondering really you ask something like that. It is well known that the support for mobile devices (laptops) is offered by laptop manufacturer and not by the hardware manufacturer.

  Because of the design of specific laptops with limited cooling performance graphics card can not be upgraded as on maps graphics designed for desktop computers. New driver means more performance. More performance means more heat and result can be damage of graphics card or switch-offs due to temperature-critical material.

• Satellite A660-07U - cannot install the new display driver

  When I got to my laptop, it wouldn't even start the box! So I googled how to get operational and it wouldn't install Windows 7 32 bit, so I installed Windows 7 64 bit and that worked.

  I am one of the users who is also having their laptop freeze on them at all times. I did the update to the Bios and it always does. So I decided to try to update the graphics drivers with new ones on this site, but it seems that they won't install. I got 64-bit drivers for Windows 7 first, I have Windows 7 64 bit installed in my laptop. But it cannot find the necessary material, I thought, he says its because my laptop is not a 3D version, should even elsewhere?

  So then I tried the 32 bit drivers and it says im using the wrong system operating system for these drivers.

  How about if some drivers I can use?

  Hello

  A moment I really t understand: why you have your own version of Windows 7?
  Usually by Satellite A660 is always equipped with operating system (Windows 7) and it s already preinstalled. This means that you can start your computer laptop out of the box and Windows 7 will begin. Therefore, you don't need an additional installation.
  And let me guess: you don t have created a right Toshiba Recovery disk?

  In any case, before update you the display driver you must remove the older version first. Then, restart your computer and install the latest version.

• Bad BIOS installed on the Satellite A200

  I had one laptop Satellite A200 and I downloaded and installed an incorrect BIOS. Then I restarted my laptop and it is empty. I researched and downloaded many programs, but I don't have a USB floppy drive. I downloaded phlash16, created an autoexec.bat file and follow all directions I've read on different post of different Web sites.

  Can someone please help me to recover my BIOS using the virtual floppy drive to USB and can someone please give a process step by step on how to reflash the BIOS. My laptop is Toshiba Satellite A200. Please give me a BIOS for my laptop.

  Please email me [email protected]

  Any help will be much appreciated. Thank you.

  Hi mate

  > I had a laptop Satellite A200 and I downloaded and installed an incorrect BIOS. Then I restarted my laptop and it is empty

  I'm afraid, you will need to contact the ASP in your country in order to solve this problem of m

  Toshiba driver page contains no traditional BIOS updates but only focus on the Win BIOS update, this means that you will not be able to update the BIOS by using a floppy disk because you don t have a traditional BIOS version

  Get in contact with the ASO technician, they can help you!

• Satellite C855 - 12K - can not install the correct display driver

  I have a Satellite C855 - 12K for the Croatian market. Recently, I noticed a loss of performance in games, even on settings low that I used to play normally high or ultra. So I decided to reinstall windows and get the latest drivers.

  All drivers installed correctly the display one, when I install and reboot the system and the laptop BSOD out restores.
  I tried to manually install the driver without any catalyst, but that does not work either.
  NET framework 4.5, directx 11 and vcredist are all installed in front of the pilot.
  Does anyone have an idea what this topic?
  Graphics card is the Radeon HD7610M.

  Update on this:
  I just managed to find the old CCC software (version 2012.0120.420.7502) and it installed fine.
  I am still concerned why the new driver does not work?

  Post edited by: markov

  Hi Markov

  According to the specifications of the laptop this model was delivered without BONES. Can you please tell us what OS you use and don't you try to install the driver on the Toshiba download page?

• Some devices are not correctly installed on the Satellite Pro A200

  I have the Satellite Pro A200 psae7e. and I also have a problem with the PCI memory controller, Modem device on high definition audio bus, mass storage controller, because they are marked in yellow in the Device Manager.

  My knee works fine... sata works fine, graphic controller & etc. Everything in the natural order. but I don't want the yellow icons in Device Manager.

  How to solve this problem. I installed all the drivers, but there is still that the yellow icons that appear.

  And could someone tell me what is the PCI memory controller? Is that the shared memory?

  PCI memory controller is Intel Turbo Memory, also called chip logic Intel Flash cache
  It s a new technology designed to support the new features of Vista.
  There is no driver for Windows XP because XP doesn t supports the cache feature.

  The component of embedded controller compatible ACPI Microsoft supports the Advanced Configuration and Power Interface (ACPI) AC adapter device objects that the operating system uses to manage the resources of power.
  Seems that you BIOS does not support this!

  Update the BIOS to version XP!