error of current usb error 701

Similar Questions

• The famous message «current usb...» blackBerry smartphones ».

  I have studied this issue and tried all the solutions I could find online and I always get the message "' current usb does not verify that your Pocket PC is connected to a powered USB charge source and that the appropriate USB driver is installed." "
  My BB is connected to my laptop usb port (I tried all four) laptop is plugged into an electrical outlet. I have installed and reinstalled the DM 4.7 3 times. The BB shows in Device Manager as SD Blackberry under "Portable devices" and says that it is working properly. The BB Desktop manager sees any unit.
  I use the 64 bit version of Vista Home premium. The laptop is new the new blackberry. Oh AND I made sure the power management for usb "allow the computer to turn off this device to save power" is deselected.
  I even tried to install just the USB and Modem driver off site of Blackberry which eventually completely wipping on the Desktop Manager and still does not work.
  So now what? I am really frustrated. It took hours to try to fix. Any ideas?

  BTW, I can charge the phone via the usb port and access to the press card, but that's all. DM doesn't connect or doesn't see the device. I can't synchronize my calendar or contacts

  Well I came across a solution, at least for me, and I'm on secondment incase someone would try it.

  I received NO indication of blackberry devices under USB controllers no Smartphone Blackberry Manager nothing. Only Blackberry SD under "Portable Device" that shows just that vista was to see the mass media card in the blackberry. DM has not seen the BB and my BB gave me infamous message mentioned in my post.

  Anyway, with the Blackberry plugged into the USB port, I did a Windows Update. Not really to think that he would do anything. Well, I was wrong... among all updates for Windows was updated for Smartphone Blackberry RIM. So I installed it and poof the computer began to install the device driver and now I'm in business! No where in my research I have see performing an update of Windows with the connected Blackberry. I don't know even why I tried, but I'm glad I did. Hope this helps others.

• My speakers to the stopped working. Them are the Logitech speakers to a laptop. When I turn on my laptop, I get a message that says the following. Error 0701: over-current usb on HC/Port-Bus: ooh Dev1dh Fun: 024 / Port: 01 h

  Logitech speakers no longer work on my laptop. I need help. I have windows vista home, I had these speakers for over a year and now they do not work.

  Hi Rickdm,

  This error occurs when you have a USB device or USB port problem.

  You can try to remove the speakers, restart the computer and check what is happening.

  If possible, try to connect another audio device in the computer. Try a pair of speakers to ensure that the problem is not related to the different sound device.

  Determine whether you can hear sound. If you can hear the noise, there is a problem with the audio device.

  This also happen if the usb port is damaged, try with a different usb port. If it still doesn't work do not, contact manufacturer as it is a hardware problem.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error 701 even if the network card is disabled.

  Get the 701 error even if the network card is disabled.

  See photos.

  Is there any fix to it?

  Regards Carl

  Problem solved!

  At the tip of reinstall the defective original wireless network card and disable it.

  The error message in the upstart disappered.

  I now use network map TP Link USB instead with no problems.

• Put short current USB

  When I plug an external device (interactive metronome - therapy neuro-cognitive/diagnostic tool) in Windows XP via Parallels, after some time (ranging from 2 ~ 30 min later) an error pop up message notification:

  USB over current notice

  A USB device is currently developing too much power

  The hub to which it is attached to will be de-acvitated

  This never used to happen.  My guy at clevertech said its likely the logic board... other ideas?

  I can work around this problem by clicking NO in the dialog box context-sensitive (to disable the USB port), restart app and re - plug in the USB...

  MacBookPro 15 "

  2.16 Ghz IntelCore 2 Duo

  4 MB L2

  2 GB Mem

  10.5.8

  Parallels v3.0

  If you use a multiple plug bus-powered hub or no hub external at all, this can happen.

  You can get a good self-powered hub to $20-ish at BestBuy - power AC gives power to USB devices and the MBP has only to provide communications.

• measurement of the current usb or 6009

  I'm trying to trace the evolution of a CCCV charger while it loads a 60V lithium-ion battery. I know that the charge rate is (1/6) C and the nominal capacity of the battery is 26Ahr resulting in a current of 4.33 has during this constant stage. I have the NI USB-6009 case and that e/s analog devices is estimated at 50 Ma, so I can't connect a thread of the charger directly on the device OR. I was thinking of buying a CT that connects directly to the material NOR and run the (+) lead from charger through the CT, as it charges the battery. What is the best way to go with the flow for a complete charge cycle? What are the other options to draw current developments?

  A CurrentTransformer will work with current alternative...

  A CT compensated with element Hall (research LEM) can measure AC / DC...

  I'd look for a Hall Allegro current sensor... has a galvanic isolation output, and the output is the input range 6009.

• Limitation of current USB-6008

  I use the USB-6008 device in a new application to read analog values, then the fire solenoids based on the readings.  Current on the USB-6008 case limitation is my 8.5 specifications and the device I want to drive is rated 5V 38 my.  Does anyone know of an application for increase in the output of the analog switch or USB-6008, as with a transistor?

  Kind regards

  RDD

  You can use one of the ULN2xxx relay drivers.

• How to get current USB in Labview

  Using the Windows Device Manager and selecting the USB HUB, you are able to see the current consumption of your USB devices.

  See attached picture.

  Is it possible to get this value programmatically using Windows DLL calls in Labview or Labview property?

  Thank you

  You can see what the unit is ESTIMATED to consume.  This is not a value of actual consumption.

  It is possible to achieve this programmatically, but I doubt it will give you the information you are looking for...

• How can I determine my current USB ports on Windowx XP (1.1 or 2.0) size?

  I want to buy a flash drive, and I would like to know what size my USB ports.

  It is not the size, but the speed.  If you buy a USB 2.0 flash drive, it will work on USB 1.1 or USB 2.0.

  If you only have USB 1.1 ports, you will get a warning when you plug the flash drive that "this device might work more quickly if connected to a USB 2.0 port.

  To determine what you

  • Open the Device Manager (start > run > devmgmt.msc > OK)
  • Click on the + to the left of the Universal Serial Bus Controllers (it's at the bottom of the list)
  • You will see one or more lines containing the words 'Host Controller'.  If neither of these lines has the words "Enhanced Host Controller", then you have at least some USB 2.0 ports.  If none of the host controllers is "strengthened", then they are all USB 1.1
  • Some older computers have a mix of USB 2.0 and USB 1.1 ports.  If you see 'Enhanced Host Controller' in the list in Device Manager, but you get the warning message when you connect a USB 2.0 device, try another port.  In particular, if you first tried a port on the front of the computer, try one in the back instead (or vice versa).

• HP DV6T-1300 lost connectivity to the internet, error display 701

  I have a laptop HP DV6T - 1300 Entertainment who has lost connectivity to the internet, and it displays error 701. All of my diagnostic checks, I think that he has lost the pilot because he does not have a wireless card. I downloaded the drivers wireless (five each) HP support and assumes that the Realtek driver is the original. What is the purpose of all other drivers (Broadcom, Atheros, Wireless & Bluetooth Pro) and they need to be installed or not? They are updated day or improvements or are drivers for the other cards in different models of this computer? I use the laptop for my wife to access the net until I fix this. Thanks in advance!

  After that to install the Realtek driver (original), I discovered that the software does not recognize that there is a wireless card. In my view, the map is part of the motherboard and may have failed. I suspect that my best solution may be to buy an external wireless card and install it. Any suggestions?

  I don't know exactly what happened, but after restarting a couple of times, the wireless card started working again. He works actually better than what he has. The downloaded driver was an updated version, and this may explain the improvement.

  Different cards for different models of different computers in your model class.  You only need the driver for your system.

  The updated driver for your model of correction probably your problem.  The fact that it works better than before is, of course, a plus.

  If you don't already have it, here is the wireless connection manager:

  HP sp54945 V4.1.25.1 Connection Manager

   

  Connecting to a network with the 4.x connection manager

   

   

  For your reading pleasure:
  

  Domestic use Wireless-G and Wireless-N devices on a network

   

   

• Satellite 1110-Z14: ATI-Graphic cause error when using LAN, DSL

  English version below!

  UPS... German version not accepted... angry!

  [English]
  Computer laptop Satellite 1110-Z14 crashes when you use LAN (network connection).
  Error message: too high voltage or a current USB device, there is no USB device not connected!
  (ATI) graphics card doesn't work properly (low resolution) - reboot, the system crashes to the top
  Note: The laptop work stable during the use not LAN!
  The system is clean! Please don't tell me that I need to reinstall my software.

  Does anyone know about this error? Thanks in advance.

  Hello

  It is the first time I heard of this problem.
  For me it looks like a hardware malfunction and I don t think you will solve it by yourself. In my opinion you need an expert and the only way is to contact the Toshiba service partner in your country. He can start the diagnostic test and it can give you an appropriate response.

• Satellite A100-991 - cannot boot from USB device

  My Satellite A100-991 (MS Windows XP MCE, SP3) does not start from a USB key or USB hard drive. The same USB devices are bootable if they are connected to a desktop computer or a laptop from other manufacturers. I put the USB as the first boot device and use an image "Bart PE" on my USB device.

  In fact, I have installed 2.10 Phoenix Bios version and I wonder if I could update the BIOS by using the 'sa105v21.exe' program and that this would resolve the startup problem.

  Hello

  Have you tested different USB keys? I think that your current USB key is not compatible
  Also test the USB to different USB ports. A port may be defective for the computer to start t with him.

  Theoretically, you can try upgrading the BIOS but don t forget s a bit more risky and it should be the last step.
  Prior to this, load default settings in the BIOS and check if you can boot from USB.

• The PCIe for USB 6211 OEM replacement

  Hi you all,.

  We want to change our design to use PCIe card data acquisition, since we had a few USB driver problem in the past. Is the PCIe-6321 a good match to replace the capture USB-6211-OEM card

  Is there a better alternative?

  Thank you

  Fabrice

  Hello Fabrizio,

  Thank you for taking an interest in our line of PCIe cards DAQ. I took a glance at the USB-6211 OEM and PCIe-6321 to see if they are similar in specifications and capabilities. I would say the 6321 is a good match to replace your current USB card. As long as you intend to use no more i/o lines than expected or exceeds the designated sampling rate then it should be a good substitute.

  If you need high speed sampling or more i/o lines for various tasks, then another card can better meet your needs.

  The resources below compares several of our devices (USB and PCIe) X series.

  What is NI X Series? -1. Presentation of the product

  ---

  These links may also be useful during your upgrade:

  Major differences between series E, series M and material X NI DAQ series

  ---

  Guide to upgrade NI X series (USB to USB devices however)

  ---

  Kind regards
  Alex C.

• My laptop rpet device usb can perform better when there is nothing connected and it does again and again

  can someone help me I have a laptop running xp win at the time where he continues to start and starts the programs he started to appear the box that indicates the usb device can perform better. The problem is no usb devices are connected and it appears again and again. I uninstalled all the USB in the device manager then reboot, it finds all the usb and begins to do it again. I think it might be an update but do not know about you.

  Ok. try to uninstall the current usb drivers and reinstall.
  Use the good day updated USB 2.0 driver.

  reference http://msdn.microsoft.com/en-us/windows/hardware/gg487327.aspx

  pls make sure there is no virus infected on your system.

  Thank you!!

• A1 - 830 USB loading too weak to support its use?

  My Tablet goes dead when I play games while it is connected to my laptop to charge via usb, because apparently it is not getting enough energy to spare. When the Tablet is attached to the tht of transformator usb is plugged into a 220 outlet it seems its ok...
  My question is - is this normal?
  To me, it seems illogical since current usb should b the same.

  PC/laptop USB: 5V 0, 5Ah (international standard)

  Charger AC/DC: 5V 1Ah (you can find Chargers until 2Ah)

  You can easily understand that you have more ampere hour (Ah) using the AC charger.

  Ampere:

  http://en.Wikipedia.org/wiki/ampere

  So it's normal.