Similar Questions

• Collage error: runtime error. Error: access violation, address of the error: 0000 P 280, the Module name: GFSData.DLL

  Hello to all on the forum,

  I am running DIAdem 2015 (15.0.0f6005) on a Windows 7 Pro SP1 i3 4 GB RAM machine.

  I want to evaluate a test. Data are expressed as 25 .txt files. I need to plot, one of the values on the whole test time. I tried to combine the data from all 25 in one file .tdm .txt files. I came far enough until I met my problem. After gathering around 15 .txt files in a .tdm, tiara doesn't let me continue. It gives this error message (in German, I'll translate as good as possible):

  "When executing command 'DataBlClpPaste('1-52',1859122,0)' a rumtime error has occurred.

  Error: ACCESS VIOLATION

  Address of the error: 0000 P 280

  "Name of the module: FGSData.DLL.

  I will describe my procedure in which this happened:

  -Open the .txt with plugin I had created the first import

  -Ribbon with two windows view channel: have the target in a secondary window group, drag the newly imported from .txt in the other channels

  -In the secondary window with new data, select the lines I want to add to the data target group by clicking on the first line, then scroll to the last row and shift-select that. CTRL + c to copy the data

  -In the target group, click the first empty line, and then ctrl + v to paste data here

  After the last step, instead of pasting the new data in the target dataset, the above message error. I can't do anything, but click on 'ok '. After ok, the program window will not respond to any click except for switching between Navigator / View / analysis /... I have to close DIAdem, where I can always select "close and save", that works too.

  I could go a few times after reopening DIAdem, but finally, which stopped working. It now gives me the error message whenever I try to do this routine. The .tdm file is 21Mo now, the .tdx is 1.1 GB.

  I appreciate any help on this, I really would prefer combining data using DIAdem on trying to copy and paste around 1 GB of data .txt into one giant .txt file. It takes very long to not even open a .txt of 50 MB file, I fear this would be a messy process.

  Best regards

  Simon

  If you are using DIAdem 2015, there is a new entry in context menu where you can select Add.

  Maybe it helps.

  The help of DIAdem 2015:

  Adding data

  
  

  Adding data to merge similar series ratings data in order to deal with them. In the process, DIAdem adds the data to load for existing channels with the same name in the data portal instead of storing data in new channels. Perform the following steps to add the external data area data channels in the data portal:

  1. Open the NAVIGATOR tiara.

  
  

  2. Select remove internal data to delete the data in the data portal.

  
  

  3. Find the Demo1.tdm file in the file browser.

  
  

  4. Drag and drop the file in the data portal.

  
  

  5. Select the Demo2.tdm file in the file browser.

  
  

  6. Open the context menu of the file and select Add data.

  
  

  Tiara adds the data in channels that have the same name in the data portal. In the properties of the Data Portal window, you can see that the number of values in the channels has doubled.

• Error 1606.Could access the network location. Problem installing driver scanner.

  I tried to install the drivers for a more BearPaw 2448TA scanner in the edition of Windows 7 Home Premium (64-bit).

  Recently, a message appeared in the center of the Action to say that a new driver of Mustek systems was available, I downloaded and tried to install.

  A messagebox is displayed during the installation with the following message
  "Error 1606.Could not access network location------." and the installation will fail.

  Help would be greatly appreciated.

  Hi HenryGib121,

  Thank you for using the Microsoft Answers forums.
   
  I suggest you to download and install the driver from the link below.
  http://www.mustek.com/Mustek/support.php
   
  This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry.

  If the problem persists try the steps and check them off below.

  You can create a system restore before trying the steps below in order to be on the safer side.
  http://Windows.Microsoft.com/en-us/Windows7/create-a-restore-point

  The steps to correct this problem involve editing the Windows registry.  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Here are the steps to fix it.
  1. click on start, run, type regedit in the Open box, and then click OK.
  2. look for the following registry key:
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\
  3 remove the entries that show the path that is listed in the error message.

  If the steps above did not resolve your problem, then you can try to create a new user account and check.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
  http://support.Microsoft.com/kb/811151 (this article is for xp, but can also be used for vista and windows 7)

  You can also contact the mustek support team for help.
  http://www.mustek.com.tw/support/
   
  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• error of initialization of the local db

  Hello

  on Siebel 8.1.1.8 I get the following errors when you attempt to initialize the local promoter database:

  Error: Directory/Fs/att, / Fs2/att, att/Fs3 / does not exist.

  SBL-DCK-00179: could not establish the synchronization with the server session.

  Before that, I have successfully completed the following steps:

  -Add the user for mobile Siebel remote

  -generate new models of db

  -extract from the database

  -check that all the components of Siebel remotely are in Active state

  Once I have start Siebel Tools with the data source local and allow the tools to connect remotely to Siebel, I get the mentioned error.

  
  

  It is a Siebel File System company parameter with the value "/Fs/att, / Fs2/att, att/Fs3 / ' and these directories exist on the application server. Where else should be created?

  Please suggest, what don't get me.

  Thanks in advance

  Hello

  Check if the local database initialization works by connecting the computer to the developer with a domain account. Check the Doc ID 483574.1 on My Oracle Support to find additional information.

  It will be useful,

  WSiebel

• Error 1606 could access the network location

  Zac,
  I have exactly the same problem and it appears so when I tried to install the student version of Microsoft Office and update Java and updated vesion of Adobe.  I found the Article ID: 886549 on the Microsoft Support site, but it was confusing.  It tells you that you must change the registry.  I can do it, but the first statement shown on the print are actually for Windows XP and NOT Vista.  You must go to the second page and find the Vista fix.  I followed the instructions for Visat and then you get to a second registry key that needs to change.  This time there is only a set of instructions and comparing to my values of Vista it show that my system was COMPLETELY different from those I had to enter.  My concern is that the second key values were also means ofr XP and not vista.  Can you help me?

  I made the following changes to HKEY_CURRENT_USER\Software. Microsoft\Windows\CurrentVersion\Explorer\User Version Shell thank you, Hangels777

  Hello Hangels777,

  Thank you for posting.  I would say that you haven't try any change of registry which is meant for XP.  This error is due to Java and probably the Adobe update.  I recommend you to manually check for the latest versions of Java and flash player.  You may need to uninstall and reinstall to the problem must be resolved.

  Please, try the following steps and let me know if this helps you. Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I can't update my Add-Ins. I always get the error: unexpected installation error - 203 when installing the modules. I have found a workaround for Windows, but I have MacOS. Can you help me?

  Mac OS 10.6.6 system

  They are also for the Mac. If the first link which cor - el posted is information showing for Windows, in the right-hand column under where it says "help", select Mac OS X and Firefox 3.5 - 3.6

• LAYOUT ERROR 1670 UNABLE TO LOAD THE MODULE UPGRADE MSDS 15.1.0. TO 15.3.0

  I'm in TMS 15.1.0 and try to upgrade to 15.3.0...

  I am connected with admin priv.   Get the error failed to load the module 1670...  Error code 5?

  Any ideas?

  VR

  C

  This would make sense, generally a good idea to turn any virus protection during the installation/update just in case so to avoid problems such as this, so it is the anti-virus that is causing the error.

• Try to update Java, Adobe Reader and now RIM Blackberry Desktop Manager, Error 1606 could not access network location.

  I got this error for a few months. Initially, I came across it trying to update Java, Adobe Reader and now RIM Blackberry Desktop Manager.

  The specific error is "Error 1606 could access the network location:.", with the colon and the dot at the end. Therefore, it is difficult to know exactly what registry entry, it's.

  I tried to change various registry keys and using a number of files of Microsoft "Fix it for me", but the error remains.

  Can someone help me please identify the location of the network that weird symbols ":." to refer and possible to put an end to this problem once and for all?
  I'd be happy to re - try fix if proposed as a possible solution.

  Thanks in advance.

  Hello

  1. What microsoft fix it did you try?
  2. don't you make changes on the computer before the show?

  This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry.

  The steps to correct this problem involve editing the Windows registry.

  WARNING: this method contains steps that tell you how to modify the registry. However, serious problems can occur if you change the
  Register incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it.
  Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
  a. Click Start and typeregedit in the search box start and press to enter.
  b. find the following registry key:
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\
  c. remove the entries that show the path that is listed in the error message.

  You can also consult the steps in knowledge base article provided assistance:
  http://support.Microsoft.com/kb/886549

• All pending before the module identifier.

  I have 2 files.

  I loaded the main file img.swf and try to make a preloader in the main.fla file.

  But after compiling, I get error:

  1084: syntax error: expected identifier before the module.

  Anyone can unmask problem and help?

  Code:

  var req:URLRequest=new URLRequest("img.swf");
  var myLoader:Loader=new Loader  ;
  
  function imgFileLoaded(event:Event):void {
       addChild(myLoader);
  }
  
  function preloader(event:ProgressEvent):void {
       var percentage:Number=Math.round(event.bytesLoaded / event.bytesTotal *100);
       preloader_txt.text=String(percentage) + %;
  }
  
  myLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, imgFileLoaded);
  myLoader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, preloader);
  
  myLoader.load(req);
  

  Also the attached files.

  If you do not have this '%' in quotes, you need.

• Windows XP starts, an error message appears. 'RUNDLL error loading C:\Windows\ihukuqej.dll'. The module specific cound not be found.

  Original title: Windows Rundll error on startup

  My laptop, Windows XP startup, an error message appears. RUNDLL error loading C:\Windows\ihukuqej.dll.  The module specific cound not be found.  I downloaded ParetoLogic PC Health, did a full scan on the registry and fixed all of them, rebooted and its still there.

  What is a rundll error?

  File rundll.exe are processes systems directly connected to your computer Windows registry. All of the Dll files are a part of the vast library that contains code and data that are shared by many programs. This allows to obtain the effectiveness of speed and memory of your operating system by reusing the same code or file to run many functions of various programs. An error occurs when the program are not allowed to access this code.

  Why do you Rundll errors?

  Windows uses rundll files to load programs, files, and applications. If the dll file is missing or damaged, any application using this file cannot be loaded. This will produce a rundll error. The reason why the file has disappeared is often related to a virus or spyware. This type of malware often tries to divert the files shared by the rundll file. Other sharing programs file then do not work effectively or to load any.

  STEP 1: IDENTIFY

  The first thing you need to do is to identify the process specific rundll. This isn't a difficult task; There is a library online extensive process in which you can assess the validity of the process that is running. When the error dialog box opens, it displays the name of the process. For example, if the dialog box appears and tells you the dll error:

  STEP 2: STOP THE PROCESS

  Often, you can locate the Dll of enforcement in the services of the exe. You can open your services configuration by following the instructions below:
  1. open your Start menu.
  2. click on run
  3. in the command screen type:services.msc
  4. This will bring to the top of the window Management of the Services . If you drag the mouse to one of the services. It will give you a detailed explanation of the service in question. By right-clicking the individual service.
  5.stop the "dll" service immediately.

  NOTE: sometimes the dll process can not be stopped by this method.

  

  STEP 3: CHECK FOR AND REMOVE

  You need to open your Windows registry file system. It is an extremely delicate process. The registry key: HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

  This action will help you speed up the considerable load time of your applications. Here's how:

  1. click on Start
  2. click on run
  3. type regedit
  4. find this registry key:
  HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

  5. in the right section click on: "rusvdgpo" = "%System%undll32.exe % System%usvdgpo.dll, [RANDOM LETTERS].
  6. delete the value and reboot.

  

  SPECIAL REMARKS

  Rundll.exe is a critical system process. However, there a great vulnerability is back, which makes it more prone to malicious purposes by an attacker allowing access to your computer from remote locations, stealing passwords, personal data and Internet banking.

  The Trojans are usually use this attack method to share a process that invites the other malware be more Trojan horses or other forms of spyware. The best defense is to keep your security up-to-date software and explain the process of rundll on your computer.

  ======================

  More information is a lot to explain and resolve the problem.

  Since it is a painful process for beginners, it is best to create a new user account and remove the error causing the user account.

  Because not only it solves problems, there will be new user settings and the program files needed for the user account.

  Once you are in the new user account, you can scan by using a program that synchronize with the server and check for virus/malware/spyware.

  Here is the link.

  Run hitman pro 3.5

  http://www.SurfRight.nl/en/downloads

• execution of DLLs. Error loading cbbxw.dll. the specified module could not be found. -what it means and how do I get rid of him?

  execution of DLLs. Error loading cbbxw.dll. the specified module could not be found. -what it means and how do I get rid of him?

  You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• error message saying "error loading wingsw32.rom the specific module was not found" whenever I boot my system

  wingsw32. ROM

  I get an error saying "error loading wingsw32.rom the specific module is not found" whenever I boot my system.

  Can someone help me in this.

  Thanks in advance!

  ·                                You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform quick scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• ORA-28546: initialization of the connection failed, probable Net8 admin error

  I'm unable to access DB SQL Server to Oracle

  ERROR on line 1:

  ORA-28546: initialization of the connection failed, probable Net8 admin error

  ORA-02063: preceding the line of ODBC

  Please suggest? Here are the details:

  DBlink is

  Create the link to ODBC database to connect to 'his' identified by "orcl" using "master";

  File D:\app\admin\product\11.2.0\dbhome_1\hs\admin has initMaster.ora

  HS_FDS_CONNECT_INFO = master

  HS_FDS_TRACE_LEVEL = OFF

  ORACLE_HOME (D:\app\admin\product\11.2.0\dbhome_1\NETWORK\ADMIN) file has listener.ora and tnsnames.ora as follows:

  1. tnsnames.ora:

  tnsnames.ora # Network Configuration file: D:\app\admin\product\11.2.0\dbhome_1\network\admin\tnsnames.ora

  # Generated by Oracle configuration tools.

  LISTENER_ORCL =

  (ADDRESS = (PROTOCOL = TCP) (HOST = FILT137)(PORT = 1521))

  ORACLR_CONNECTION_DATA =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  )

  (CONNECT_DATA =

  (SID = CLRExtProc)

  (PRESENTATION = RO)

  )

  )

  ORCL =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = FILT137)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = orcl)

  )

  )

  Master = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=FILT137) (PORT = 1521)) (CONNECT_DATA = (SID = master)(HS=)))

  #Master = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=FILT137) (PORT = 1522)) (CONNECT_DATA = (SID = Master))(HS=OK))

  1. Listener.ora:

  listener.ora # Network Configuration file: D:\app\admin\product\11.2.0\dbhome_1\network\admin\listener.ora

  # Generated by Oracle configuration tools.

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = CLRExtProc)

  (ORACLE_HOME = D:\app\admin\product\11.2.0\dbhome_1)

  (= Extproc PROGRAM)

  (ENVS = "EXTPROC_DLLS=ONLY:D:\app\admin\product\11.2.0\dbhome_1\bin\oraclr11.dll")

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  (ADDRESS = (PROTOCOL = TCP) (HOST = FILT137)(PORT = 1521))

  )

  )

  ADR_BASE_LISTENER = D:\app\admin

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = master)

  (ORACLE_HOME=D:\app\admin\product\11.2.0\dbhome_1)

  (PROGRAM = dg4odbc)

  )

  )

  Problem-

  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:

  [Microsoft] [ODBC driver manager] The specified DSN contains an architecture

  incompatibility between the driver and the Application {IM014}

  Solution-

  Made 'Master' DSN for 64-bit and 32-bit help following and it resolved.

  For 64-bit ODBC locates here (c:\windows\system32\odbcad32.exe).

  For 32-bit ODBC locates here (c:\windows\sysWOW64\odbcad32.exe)

• It appears two times after the opening of Firefox ' [JavaScript error: 'dir is zero' {file: "file:///C:/Users/... and a new window opens each time."}] Opening of the modules in the Tools menu crashes Firefox.

  Whenever I open Firefox, or when a website automatically opens a new window (NOT when I open a new tab or window) error message is displayed twice: ' [JavaScript error: "dir is zero" {file: 'file:///C:/Users/Steve/AppData/Roaming/Mozilla/Firefox/Profiles/k8nfi7qa.default/extensions/%7B0538E3E3-7E9B-4d49-8831-A227C80A7AD3%7D/components/nsForecastfox.js' line: 323}] "when calling method: [ffIDiskService::get]"
  Then, after closing the window of mistake twice, an AnyColor start/welcome screen appears in a second, open tab, which I then close to resume with the first tab (active). If I try to open the modules in the menu Tools, Firefox crashes and a script error message. It then becomes "unresponsive" and I have to force - close Firefox and reopen.

  This looks like a problem with an add-on, especially the Forecastfox extension. To test this try to disable the add-on in safe mode, for details on how to see the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems.

• The initialization of the project of error

  Whenever I open a sample project, I get this error of initialization (screenshot attached). It could be the cause, or how can I solve this problem? Thanks in advance!

  It's really weird.   It seems that your directory where this example had permissions writable for data sets could be written here that chagned to authorization and MWO is let you know there is no write permission.    I see two options.

  1. go in this directory where this example and remove all folders of data sets that see you.  Avoid all in the expedition of AWRDE examples folder.

  2. save the project in another place where you do not have write access and then it should work.