ORA-28546: initialization of the connection failed, probable Net8 admin error

Similar Questions

• ORA-28547: connection to the server failed, probable Oracle Net admin error.

  Dear all,

  My11gR2 database on windows 2008 R2 Standard is in error "ORA-28547: connection to the server failed, probable Oracle Net admin error.

  It's when I try to log on to the server itself

  as:

  SQL * more: Production of release 11.2.0.1.0 kills him Oct 8 05:43:03 2013

  Copyright (c) 1982, 2010, Oracle.  All rights reserved.

  Enter the user name: sys/***@orcl as sysdba

  "ORA-28547: failed to connect to the server, likely admin error Oracle Net.

  This started happening when the server has been restarted. I don't know if I have to stop any service, as in some cases under Linux should be stopped service iptables.

  The solution I found on most of the forums is to change in sqlnet.ora since '#SQLNET. AUTHENTICATION_SERVICES = (NTS) 'to' #SQLNET. AUTHENTICATION_SERVICES = (NONE)"and restart the receiver.

  But even if it doesn't in my case.

  Kindly help.

  Best regards, Imran

  Guys, there are 2 databases installed on the same server, to correctly configure the SID. Once set, I could see that the database is down and when starting it started working well.

  Thanks for your efforts.

• Try to update Shockwave Flash; It downloads, but when I click on install; the connection fails? WHY not the connection?

  Update of Adobe Reader, Shockwave Flash and Java used to be so easy... until a year ago. Now, I hate when I run the Plugin Firefox check, only to see the UPDATE. I seem to be able to download ("initialization") the app, but when I go to INSTALL (I hope I have the right words), it indicates that the CONNECTION FAILED. Try again. THE CONNECTION HAS FAILED. CLICK FINISH TO RESTART THE INSTALLATION PROCESS. It became a cycle without end I contacted my internet provider (and going through their process of reboot) I'm connected to the Internet. I disabled my anti-virus prgm and my firewall; nothing seems to help. Last time I could actually INSTALL one of the programs/applications above, I did it with the help of ' solving problems when you use Firefox "... and who let me download,... but I can't find a selection like this now... it's why I write for Firefox/Mozilla.
  I have been using Firefox for about 5-6 years now, and I love it! Except for these issues. I'm not a dummie, but not a geek either... I just need help.

  • See Flash Plugin - maintain and troubleshoot
  • Use the adobe page
    http://www.Adobe.com/software/Flash/about/
    At the same time check the version installed, and which is the latest available versions.

  You have a version 17 for what is very recent and are perhaps the most recent and up to date. The latest version is currently 17.0 v. 0.188

  There may be some small problem with the auditor to update Firefox rather than with your updates.

  • The Firefox Plugin checker is available in the page manager addons or use this link
    Mozilla.org/pluginCheck/

• error 1114 dynamic link library (DLL) initialization of the routine failed.

  I can't connect to internet

  Windows could not start the Service diagnostic on the local computer policy.  error 1114 dynamic link library (DLL) initialization of the routine failed.

  What is the solution to this problem everyone?

  Hello
  1 did you change on your computer before this problem?
  2. When you receive this error message?
  3. are you using Internet Explorer? If Yes, what version of IE are you running?
  Find out what version of Internet Explorer you are using
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-out-which-version-of-Internet-Explorer-youre-using

   
  Follow the suggestions and check if that helps.
  Method 1
  (a) click Start .
  (b) in the search box type services.msc
  (c) right click on Diagnostic Policy service and go to the Properties.
  (d) select Auto under Startup type.
  (e) click Start .
  (f) click on apply and OK.
  (g)restart your computer.
   
  Method 2
  You can run the System File Checker.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Method 3
  You can perform the clean boot to see if a service is causing this issue.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a troubleshooting follow step 7: reset the computer to start as usual
  See also:
  The problems of Internet connection
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

   

• Import metadata connects in online mode, but "view data" says the connection failed

  Hello

  My installation of obiee is on AIX (solutions for linux will be good). I installed successfully obiee. I created a connection odbc with no problems.

  I download and installed the dev admin too i.e. the stand-alone tool.

  Offline, the two 'import metadata' and after the table is imported, 'Examining the data' works without any problem.

  In online mode, I click on 'Import metadata' of the connection pool or file, both instantly connect. Once the table is imported, I select a column and say "Look at the data" and it says that the connection failed. Should the customer Oracle DB installed on the machine as unix? I tried to copy the file tnsnames.ora to my local computer to the OracleBI_1/network/admin directory, restart services and connected in online mode, BUT always "the connection failed".

  Could someone help me with this please? seems to be a known issue.

  Thank you

  Dan

  YES for the Oracle client.

  Check this parameter to the top of the Data Sources on Linux and UNIX - 11 g Release 1 (11.1.1)

  You can copy the admin folder or completely ignore

• I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  Date and me are dealt with by the network. Try restarting your router/modem...

  Verify that DNS is set to auto

  Make sure port 123 is open on the router (refer to the manual of the router to you)

• Private DB link does not not present despite entry TNS pattern gives ORA-02019: Description of the connection to remote database not found

  Hi DBAs,

  I have created a new schema and granted create database link and create databases of public link privileges.

  After that I created the link private DB for which TNS entry is present in TNSNAMES.ora but everything by testing the link, I get the error:

  ' ORA-02019: Description of the connection to the remote database not found. '

  Kind regards

  Ritz

  Try using:

  CREATE the DATABASE LINK "VENUS.ritz.ac.uk".

  CONNECT TO 'VENUSREADONLY' IDENTIFIED BY 'FLAMING0READ0NLY' WITH THE HELP OF "VENUS."

  Your dblink seem to give the entry not TNS service name.

  Kind regards

  --

  Bertrand

  PS you have to hide people with disabilities before posting.

• PowerCLI script > how to show exit if the connection fails.

  Hello

  I found Googling below script.

  The script works fine, but I need more output, if the connection fails when an incorrect user VM account.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  $vms = GET - VM |  Where-Object {$_.} PowerState - eq "Receptor"}

  ForEach ($vm to $vms)

  {

  If (Get-VMguest - VM $vm |) Where-Object {$_.} ({OSFullName-like "* Microsoft *"})

  {

  Invoke-VMScript - VM $vm - GuestUser 'administrator' - GuestPassword 'vmware1!' - ScriptText "= driver sc query type | "find" "vsepflt'" ' bat - ScriptType | format-list name, ScriptOutput, vm

  }

  }

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  I want to see the output like this...

  .\SCRIPT.ps1

  VM: VM1

  ScriptOutput: Service_Name: vsepflt

  VM: VM2

  ScriptOutput: Connection failure

  Thank you.

  You can capture exceptions with a Try-Catch construct.

  Something like this for example

  $vms = GET - VM |  Where-Object {$_.} PowerState - eq "Receptor"}

  ForEach ($vm to $vms)

  {

  If (Get-VMguest - VM $vm |) Where-Object {$_.} ({OSFullName-like "* Microsoft *"})

  {

  try {}

  $out = Invoke-VMScript - VM $vm - GuestUser 'administrator' - GuestPassword ' vmware1! "

  ScriptText-"= driver sc query type | "find" "vsepflt'" ' ScriptType - bat - ErrorAction Stop |

  Select ScriptOutput - ExpandProperty

  }

  {} Catch [VMware.VimAutomation.ViCore.Types.V1.ErrorHandling.InvalidGuestLogin]

  $out = "invalid logon.

  }

  catch {}

  $out = "another error".

  }

  Write-Output "VM: $($vm.). "Name): $out.

  }

  }

• ORA-02019: description of the connection to the remote database not found

  Hi all
  
  10.2.0.4 on solaris 10.
  
  I can tnsping and connect to a tnsentry in tnsnames.ora from the server, but when I use the same in dblink, get the error below:
  ORA-02019: description of the connection to the remote database not found. Here's the scenario. any idea?
  

  medt01:medtora:/medt/oracle/product/102/network/admin$ tnsping medcon
  
  TNS Ping Utility for Solaris: Version 10.2.0.4.0 - Production on 09-NOV-2011 23:49:23
  
  Copyright (c) 1997,  2007, Oracle.  All rights reserved.
  
  Used parameter files:
  /medt/oracle/product/102/network/admin/sqlnet.ora
  
  
  Used TNSNAMES adapter to resolve the alias
  Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.102)(PORT = 1523))) (CONNECT_DATA = (SERVICE_NAME = medcon)))
  OK (20 msec)
  medt01:medtora:/medt/oracle/product/102/network/admin$ sqlplus medts_ed/medfcv@medcon
  
  SQL*Plus: Release 10.2.0.4.0 - Production on Wed Nov 9 23:49:31 2011
  
  Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
  
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  medt01:medtora:/medt/oracle/product/102/network/admin$ sqlplus medts_ed/medfcv@medcon
  
  SQL*Plus: Release 10.2.0.4.0 - Production on Wed Nov 9 23:59:54 2011
  
  Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
  
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> exit
  Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  medt01:medtora:/medt/oracle/product/102/network/admin$ tnsping medcon
  
  TNS Ping Utility for Solaris: Version 10.2.0.4.0 - Production on 10-NOV-2011 00:00:02
  
  Copyright (c) 1997,  2007, Oracle.  All rights reserved.
  
  Used parameter files:
  /medt/oracle/product/102/network/admin/sqlnet.ora
  
  
  Used TNSNAMES adapter to resolve the alias
  Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.102)(PORT = 1523))) (CONNECT_DATA = (SERVICE_NAME = medcon)))
  OK (0 msec)
  medt01:medtora:/medt/oracle/product/102/network/admin$ sqlplus medts_ed/medfcv@medcon
  
  SQL*Plus: Release 10.2.0.4.0 - Production on Thu Nov 10 00:00:07 2011
  
  Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
  
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> exit
  Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  medt01:medtora:/medt/oracle/product/102/network/admin$ sqlplus medc_pl/medxcdsw3
  
  SQL*Plus: Release 10.2.0.4.0 - Production on Thu Nov 10 00:00:17 2011
  
  Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
  
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
  With the Partitioning, Real Application Clusters, OLAP, Data Mining
  and Real Application Testing options
  
  SQL> create database link med2con connect to medts_ed identified by medfcv using  'medcon' ;
  
  Database link created.
  
  SQL> select * from medc@med2con;
  select * from medc@med2con
                              *
  ERROR at line 1:
  ORA-02019: connection description for remote database not found

  Try this,

  SQL > create database link med2con connect to medts_ed identified by using medfcv ' (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.0.102)(PORT = 1523))) (CONNECT_DATA = (SERVICE_NAME = medcon)))';

  SQL > select * from medc@med2con;

• When you install Visual Studio 2005 (Standard Edition) on my Vista system, the installation fails because of this error: there is no disc in the drive. Insert a disk in drive \device\harddisk5\dr5

  When you install Visual Studio 2005 (Standard Edition) on my Vista system, the installation fails because of this error: there is no disc in the drive. Please insert a disk into drive \device\harddisk5\dr5.
  My C: drive is my main area on the HARD disk.  The D: is the original Image. There are 5 locations of media FJ. the CD/DVD is E:. I have several USB ports, and a Magic Jack plugged into one of them..., printers, scanners, mouse and keyboard are also USB
  Are installed:
  FW MS .NET 1.1
  MRS. NST FW 3.5 sp1
  MS SQL Server 2005
  MS SQL Server 2005 compact Edition [ENU]
  MS SQL Server 2005 Native Client
  MS SQL Server Setup Support Files
  MS SQL Server VSS writer

  Here is the error log:
  [06/14/11, 13: 52:00] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] error code 1603 for this component means "Fatal error during installation." [06/14/11, 13: 52:00] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] Setup failed on component Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) [14/06/11 13: 52:01] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InstallManagerHelper() with HRESULT-2147023293. [06/14/11, 13: 52:01] setup.exe: [2] error component not specified in ISetupManager::AddToActionResultCollection() string [14/06/11 13: 52:12] VS70pgui: DepCheck [2] indicates that Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) is not installed. [06/14/11, 13: 52:12] VS70pgui: component [2] Unknown status double Visual Studio 2005 Remote Debugger Light (x 64) [14/06/11 13: 52:12] VS70pgui: status unknown double component [2] Document Explorer 2005 [06/14/11, 13: 52:12] VS70pgui: DepCheck [2] indicates Microsoft Visual Studio 2005 Standard Edition - ENU was not attempted to be installed. [06/14/11, 13: 52:12] VS70pgui: component [2] Unknown status for.NET Compact Framework 1.0 SP3 [14/06/11, 13: 52:12] VS70pgui: [2] for.NET status unknown component Compact Framework 2.0 [14/06/11, 13: 52:12] VS70pgui: [2] double of unknown status component Visual J# 2.0 Redistributable Package [14/06/11, 13: 52:12] VS70pgui: [2] status unknown forSQL component Server 2005 Mobile Edition [14/06/11 [, 13: 52:12] VS70pgui: [2] double of unknown status component Microsoft Device Emulator version 1.0 [14/06/11, 13: 52:12] VS70pgui: component [2] unknown status double SQL Server 2005 Express Edition x 64 [14/06/11, 13: 52:12] VS70pgui: [2] component unknown status .NET Framework 2.0 SDK (x 64) double [14/06/11, 14: 34:40] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) : [2] error code 1603 for this component means "Fatal error during installation." [06/14/11, 14: 34:40] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] Setup failed on component Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) [14/06/11 14:34:42] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InstallManagerHelper() with HRESULT-2147023293. [06/14/11, 14:34:42] setup.exe: [2] error component not specified in ISetupManager::AddToActionResultCollection() string [14/06/11, 14: 34:52] VS70pgui: DepCheck [2] indicates that Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) is not installed. [06/14/11, 14: 34:52] VS70pgui: component [2] Unknown status double Visual Studio 2005 Remote Debugger Light (x 64) [14/06/11, 14: 34:52] VS70pgui: status unknown double component [2] Document Explorer 2005 [06/14/11, 14: 34:52] VS70pgui: DepCheck [2] indicates Microsoft Visual Studio 2005 Standard Edition - ENU was not attempted to be installed. [06/14/11, 14: 34:52] VS70pgui: component [2] Unknown status for.NET Compact Framework 1.0 SP3 [14/06/11, 14: 34:52] VS70pgui: [2] for.NET status unknown component Compact Framework 2.0 [14/06/11, 14: 34:52] VS70pgui: [2] double of unknown status component Visual J# 2.0 Redistributable Package [14/06/11, 14: 34:52] VS70pgui: [2] status unknown forSQL component Server 2005 Mobile Edition [14/06/11 [14: 34:52] VS70pgui: [2] double of unknown status component Microsoft Device Emulator version 1.0 [14/06/11, 14: 34:52] VS70pgui: component [2] unknown status double SQL Server 2005 Express Edition x 64 [14/06/11, 14: 34:52] VS70pgui: [2] double status unknown component .NET Framework 2.0 SDK (x 64)

  Try to post or search the MSDN Forums

  http://social.msdn.Microsoft.com/forums/en-us/vssetup/threads

  http://social.msdn.Microsoft.com/forums/en-us/Vsexpressinstall/threads

  There are indications that some USB devices may cause this error. Try unplugging as much as you can.

• Not able to connect to MWAGUI. Telnet works, but MWAGUI in error "the connection failed". Help, please...

  Not able to connect to MWAGUI

  Telnet works, but MWAGUI giving the error "connection failed". Help, please...

  We bounced back the application and services many times MWA. Also, we have disabled enabled several port but no solution yet.

  There are 3 work of the plates for MWA GUI on the Windows Machine.

  Patch # 12574324 for 11i

  Patch # 12780257 for 11i

  Patch # 20983924 for R12

  All these patches work on Windows 7 and 8, with all versions of Java.

  The first two patches for 11i work on R12 also but with a minor problem. When you press tab even though visually the cursor moves to the next field, but in reality, it remains in the previous filed and what you enter is taken as a stream in the previous field. The replacement of the tab in the first two tasks is .

  To solve this problem the 3rd patch was created, which is the latest patch to work for R12 too but this patch after a few ORS and Patch requests (other modules) does not work anymore and gives the error "unable to connect". The first two patches can be used s a solution until a new patch coming to replace 20983924.

  Please note that CMD/batch of all three patches files is performed differently, so follow the guideline strictly for the respective patch.

  Kind regards

  Pierre Paul

• the connection failed

  Hello

  I have a new mac, I try to run a more soft adobe but the same message is displayed continuously:

  «the failure of the connection, this ID has already been used pour activate the software on two computers...» »

  I use it on another computer, but I disabled it for a 3rd.

  So I have to use it but by impossible...

  someone already had this problem?

  Thank you

  read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

  -or https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

• Discovers the connection Server 5.2 upgrade error "user lacks sufficient privileges.

  Yesterday, I posted a problem I had with the upgrade of the composer, which has now been resolved. The next step is the upgrade of the connection to the server, but I ran into an issue here as well. When running the executable of 5.2, I receive an error message regarding the user's permissions. The message I get is:

  "The currently logged-on user has sufficient privileges on the existing instance of Directory Services. Please log in as a user with administrator display rights and then try to use this facility. "(screenshot attached)

  I am connected to 2 k 8 R2 Server under an account that has Local Admin and Admin View Doman Admin privileges. By examining the log file for the installation to fail, I noticed these lines toward the end:

  ...

  serverInstUtil: 04/04/13 10:30:46 DN = or = Groups, dc = vdi, dc is vmware, dc = int
  serverInstUtil: 04/04/13 10:30:46 LDAP search failed - 32 (No Such Object).
  serverInstUtil: 04/04/13 10:30:46 ERROR: the user does not have administrator display on the LDAP instance existing rights.
  serverInstUtil: 04/04/13 10:30:48 end Logging

  ...

  It tries to authenticate with some local LDAP, rather than the internal LDAP protocol that we have specified during installation. Is this a normal behavior?

  I've never had a problem with the upgrade so that it is not a question of privileges display in your environment. Permissions for domain users are managed by the local instance of LDAP (AD LDS - formerly called ADAM) on the view connection server.

  When you installed the server to connect to the view you specified the domain user (or group) who has the full right to the environment from the view. You also have the option of specifying that all users of Windows local administrators to have full rights to view you want. By administrator-display, you can later add (or remove) more people having this right.

  Even if you are connected to the server as a user with domain administrator rights, this user does not have administrator display rights and that is why you get the error message. You can check by logging in under this same user administrator mode and see if you have the full right of the display.

  Mark

• I tried to download DirectX on my desktop but the download failed and I got error S1023

  I tried to download DirectX on my desktop with Win XP.  The download failed and I got the S1023 error message.  Now what should I do?  I need the download.

  Original title: download DirectX issue

  Delete first upward your Temp File/Cache.

  http://winhelp2002.MVPs.org/delcache.htm>

  Click Start > all programs > Accessories > System Tools > Disk Cleanup

  Better and easier to use - CCleaner.

  Download the basic build (Slim) via

  http://www.CCleaner.com/download/builds.aspx>

  The basic build (Slim) does not contain the toolbar disgusted

  Cleaning DO NOT USE ANY Advanced options. TOUCH NOT THE REGISTRY. At least not for now.

  Reset

  How to determine the version of DirectX using the DirectX Diagnostic tool

  http://support.Microsoft.com/kb/157730>

  How to download and install DirectX

  http://support.Microsoft.com/kb/179113>

  UTC/GMT is 00:04, Monday, June 11, 2012

• KB2305420 consistently fails in Microsoft update. The download fails. Direct installation, error code 80070020

  Have recently reinstalled Vista on a Vostro 1500 using the image of the Dell system.

  Service pack 1 and 2 is installed.

  A security update that kb2305430 fails to download. Fix, that he is unable to solve.

  Analysis of Ran tool.

  Reset windows update components.

  KB2305420 downloaded for visits from the download site (different size than that offered by automatic downloads)

  Downloaded but the installation failed.

  Installation was tried with anti-virus software stopped.

  I tried clean install - all services package shuts down.

  Using Vista Home premium.

  Hello

  Thank you for your response.

  I suggest you try the steps mentioned below and check if it helps.

  Windows Update, Error 80070020: http://windows.microsoft.com/is-IS/windows-vista/Windows-Update-error-80070020

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install updates: http://support.microsoft.com/kb/883825

  Hope this information is useful.