' Error of invalid product ID - with the product ID invalid
I need to fix my Windows XP installation. I used a Windows XP from my subscription "ActionPack" installation disc to repair an installation on a Dell Latitude. When you fill out the repair facility, he asked me for the code (25 characters) Windows XP. I walked into one on the back of the computer on three different times but keep error "Invalid Product ID" they receive in return. Don't know what to do next. I know that the product id is correct - and I know that I have a valid CD.
Please try using theWindows product key update tool for Windows XP.
Carey Frisch
Tags: Windows
Similar Questions
-
I bought the Adobe Master Costume CS5.5 product packaging a few years back and today I get the following message appears: "Configuration Error: there was a problem with the license of this product." You restart the computer, and restart the product. Error 213:19 ".
That was before Adobe moved to a payment structure based on participants. I need to be able to access these programs. Please provide a solution to the problem.
order to C:\ProgramData\Adobe & C:\ProgramData\Adobe\SLStore folders full reapply administrators property back on the C:\ProgramData folder and then add everyone.
-
OfficeJet Pro 8600 +. Once we replaced the ink cartridges, our printer gives an error "there is a problem with the printer or the ink system. Turn the printer off, then on. If the problem persists, contact HP. We've gone through the start/stop several times. We also pulled back and ink cartridges in, in addition to taking the print head at. I ran a diagnostic test download and it comes back with "unknown error (06). Help, please!
Thanks for your reply. We exchanged all Costco ink cartridges and the printer seems to work very well at this point. Yes, we did all of the print head and cartridge cleanings. Nothing seemed to help.
-
OfficeJet Pro 6835: Error: there is a problem with the printhead
I see that the only recourse for all those who, so far, should be under warranty.
We rarely use the printer, if the error occurred when he was one month, per week and five days out of warranty.
Someone has managed to speak to give them some satisfaction?
Obviously, it is a known issue with this printer, and we would he probably discovered (only used a set of cartridges so far - as I said, it is not so much) if we had given him more difficult to use.
Thanks in advance.
Don.
Pavilion Media Center a1610n
128 MB nVidia onboard graphics card
Windows XP SP3
1 GB of memory (about to extend to 4 GB)
Hitachi 250 GB HD sisterHi @WestofYouLB,
Welcome to the Forums of HP Support!
I see that your printer HP Officejet 6830 reports a "print head problem. I would be pleased to direct to the correct Department to help you. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
I understand how this must be frustrating for you, because you don't use the printer very often.
Due to the nature of the error message on printer HP Officejet 6830, I highly recommend contacting HP to see what your options are.
Contact HP for service in all countries except Asia-Pacific.
What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
Step 1. Open the link: www.hp.com/contacthp/
Step 2. Enter the product number or select Auto detection
Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
Step 4. Scroll down and click on: contact HP options - click Get phone number
File number and phone number are displayed.Please reply to this message with the results. I can't wait to hear strings attached good luck!
-
What are the causes of media error does not exist, even with the inserted disc
I have a video project of 2 h I want to put on a DVD in NTSC format. I get a msg of error 'Media does not exist', even with the DVD inserted in the drive. I checked "Fit content to the space available. Is the hr project 2 too long to compress the DVD, or are there other possible causes? I have made a project of 1 1/2 hours without any problem. I have a lot of hard disk space.
Download orders
What version of Premiere Elements and on what operating system works - it?
The problem is the disc in the tray of the burner not recognised by Premiere Elements. Another frequent related issue is location of burner: burn dialog is empty when the Premiere Elements does not recognize the burner.
In the problem that you have.
have a. you tried other brands/types of DVD discs?
b. If you start a new project and take the new timeline content DVD-video to DVD disc, the problem remains the same?
B. have you tried to uninstall / free program ccleaner cross / reinstall with antivirus and firewall disabled?
If you are in a time crunch, you should consider burning the chronology contained in the record and then taking the the VIDEO_TS folder
recorded in a program like ImgBurn for DVD-VIDEO on DVD production.
Please check and review and then provide you with the way to details. Looking forward to your results.
Thank you.
RTA
-
Hi all
I bought Adobe Creative Suite 6, Master collection on DVD (with different Adobe products
IWork with windows XP (SP3, German)
The error log shows different WARNINGS and errors for Adobe Professional 10.0.0.0 2
-Install MSI payload failed with the error: 1635-"Das Patchpaket nicht open werden konnte. "Stellen Sie sicher, dass das Patchpaket available ist und das Sie zugreifen können oder wenden Sie sich year is den Hersteller.
-> Could not open the patch package. "Make shure that the patch package is available and you can access it, or contact the vendor.
-ERROR: DW050: Acrobat Professiona: installation failed
Professional Adobe was not installed, the other products are now installed
Very well..
What can I do now?
Help please
Hi Mylenium
Thanks for your fast replay, but...
-Online that I need to uninstall the software first (windows - software)?
In the description for the tools is explicitly a note that the tools should not be used with the creative suite (see below):
=> Is this a false information?
Thank you
IMPORTANT: THIS TOOL SHOULD NOT BE USED WITH ANY PRODUCTS CREATIVE SUITE, INCLUDING THE SUITES THAT CONTAIN ACROBAT. IT CAN ONLY BE USED WITH THE STAND-ALONE ACROBAT AND ADOBE READER VERSIONS.
English
Operating instructions
Follow the workflow User Interface or the instructions for use of the command line below for the software Adobe Reader and Acrobat cleaning tool. Once you have finished, please send us feedback and let us know about your experience.
Workflow of UI
- Do not proceed if you installed Acrobat or Reader as part of the Creative Suite. This tool can only be used with the stand-alone versions of Acrobat and Reader.
-
error file name of report with the Chinese Date format
Hello
I see an error in the DUT report stage writing in the standard template files. This step is calling the API method save on the Runstate.Report object.
This problem occurs on computers using localization in Chinese with the date in the name of the report file.
Is this a known issue? Is it possible to change the name of the file before calling the method above to eliminate the problem?
Mike,
You have the ability to recognize characters multi-byte enabled? Please navigate to configure"Station and select the location tab. There should be a checkbox to recognize multibyte characters. This box is checked? Otherwise, try to check the box and re-run your movie file.
Please let me know the results of this test. Thank you!
-
Original title: How can I fix external MSI?
When I try to download the updates, the error message says there is a problem with the external Setup program and it must be closed. Updates will not be installed. Anyone know how to solve this problem...?
Hi John,.
· You are able to install other applications on the computer?
It seems to be a problem with the corruption of the .net framework. I suggest trying to repair the .net framework on the computer and see if you can install the updates.
http://support.Microsoft.com/kb/923100
Hope the helps of information.
-
I have a photosmart 7520 affected by the following issues.
Issue #1: randomly, all lights start flashing market and the screen reads the following:
Error. There is a problem with the printer. Turn the printer off, then on.
I can't find a move that throws this to happen.
#2 problem: When the printer is turned on and slowed down, also at RANDOM times, the printer will "Ding" followed by the flashing light wireless. So what sounds like the cartridges are cleaned, then a sound like the charger spinning or the printhead full running followed from one side to the other, then ending with a "Ding" and then back to normal.
When this happens, the wireless connection is disconnected and then reconnected. Also, this disables the "Scan to computer" function on all computers on the network and manually requires the reactivation of all.
From what I can tell the printer restarts itself.
It is plugged directly into the wall outlet, no surge protector.
Technical support has already go through the stages of the print head, me up to the top of the chain and eventually replaced the printer with a new brand.
THE NEW PRINTER STILL DOES THINGS AS PRECEDENT.
This printer is connected wireless to router Netgear N900. My all current computers running Windows 7, all are on the same network and workgroup and all are running Mcafee Total Protection.
If someone is or has experienced the same or similar problems, I could sure use help.
Solved myself.
-
I got the error code for my firewall, I read all of the solutions posted to what I could find, but there is still something wrong. First, I did the analysis of malware and viruses. He found the rootkit malware and removed, but no viruses were found. I tried to manually start the firewall but it does not exist in the services menu. The problem is that none of the Microsoft downloads for automatically fix or other downloads posted to help download for me. As soon as I click on "run" he said that it contained a virus and was eliminated. I did a scan for virus twice. Any suggestions?
The description you have provided sounds like your computer is infected with the 'new' Sirefef variant which poses problems for MSE and Windows Defender.
See Rocks of XP and RickCP suggestions in this thread: http://answers.microsoft.com/en-us/windows/forum/windows_xp-security/i-was-infected-by-a-trojan-while-running-security/8076867b-5682-4b60-9e22-183a84101340And the response of bhringer in this thread is quite comprehensive as well: http://answers.microsoft.com/en-us/protect/forum/mse-protect_start/had-something-called-system-care-antivirus/f99e19b0-ddcf-4cbb-85e4-b20f8206a723?msgId=25df3a0d-c4da-4f61-b2de-e0b3fa2e6112 -
Errors when trying to communicate with the server administrator
I'm deploying fusion web app to the stand-alone weblogic server (Version is 10.3 and its hosting OBIEE), but JDeveloper (Studio Edition Version 12.2.1.0.0) reports the error below.
[01: 27:03] - incomplete deployment.
[01: 27:03] [SPI: 260111 deployment J2EE] errors were detected while trying to communicate with the management server.
[01: 27:03] the requested attribute is not exposed via JMX: isDynamicallyCreated: com.bea:Name = AdminServer, Type = Server: DynamicallyCreated
[01: 27:03] com.bea:Name = AdminServer, Type = Server: DynamicallyCreated
However, the application server is successfully passed all the tests, the result below.
JSR-160 LENGTH tests... success
Tests of JSR-160 DomainRuntime... success
JSR - 88 tests... success
JSR-88-LOCAL tests... success
Test server MBeans model... success
... Controller App tests success
Tests of JSR-88-DEP-MGR... success
JSR-88-DEP-MGR-LOCAL tests... success
Tests of JNDI... success
JSR-160 tests edit... success
Tests of HTTP... success
11 of 11 successful tests.
I am able to successfully connect and deploy applications on the same JDeveloper weblogic - version 11.1.1.7, but I am facing issue with JDeveloper - version 12.2.1.0.0.
Any help is very appreciated.
Thank you
Vishwa
Hi Vishwa, there.
using JDev 12.2.1 to create fusion web applications means that you use ADF
12.2.1 and you try to deploy this app on WLS 10.3 which
knows nothing about ADF 12.2.1. This means that you must
install and configure the ADF 12.2.1 libraries running on your application
Server prior to deployment.
Before that review certification ADF matrix to determine the
version minimum 10.3 where you can run ADF 12.2.1-
However, you should check if installation 12.2.1 ADF will not
installation of OBIEE break.
Before you dig in fact ADF 12.2.1 installation can you pack
your application developed in JDev 12.2.1 and deploy from the admin
Console?
HTH,
A.
-
Sir... my model of computation used is ASUS Q500A and I also have the problem with my may even of them I also perform step u said in this forum, but may not work... my Windows I have used is windows 8. Please help me tnx
Separated from -.
Hello
Thanks for posting your query in Microsoft Community.
This problem is usually caused due to hardware or driver related issues. I suggest you try to install the latest drivers for the camera on the Asus or Windows Update site and check if it helps.
If the problem persists, then it would be better to contact Asus for more help on this issue. As this could be a problem with the hardware as well.
Support from Asus: http://www.support.asus.com/
Please do not hesitate to visit our Web site for any help with the Windows operating system.
-
A document of ORA-600 error [900] is not saved with the tool.
Hello
on 11 GR 2 on Win 2008 we have this alertlog:
On utility metalink for ORA - 600, it is said:ORA-00600: internal error code, arguments: [900]
Have you information?An Error document for ORA-600 [900] is not registered with the tool.
Thank youFile a SR.
-
Community salvation.
Story: I was called to look at the configuration of vSphere for a customer. When I started looking, I noticed several problems in the environment of the person who has put in place initially. I've been noting but have done nothing to fix these up to the...
A question that I've seen is that the server vSphere does not apper communicate properly on ESX 3.5 servers. The error message is similar to a post on this forum ( http://communities.vmware.com/message/1450789?tstart=0) however the same method of solution did not work.
Currently I have two ESX hosts connected to a console vSphere. The Console displays the disconnected hosts and the error points to the problems with the VPXUSER account. I found
I searched and found several articles with similar questions, so I chose a course of action
http://communities.VMware.com/message/1168241
As a note - vSphere client connections toESX welcomes also directly works very well - don't show no problems and everything seems fine.
So - my first actions were to disconnect and reconnect one of the hosts. The operation failed with the error "a general error has occurred: unable to connect with the password of administrator of vim cannot configure VIM account on the host. After that, I followed the elimination of the VPXUSER process, restarted the agents and you reconnect the server for vSphere - to the same result. I then deleted the ESX host, removed the VPXUSER, restarted the agents and added that the host ESX back once again - but no change - the same exact error message. I don't see the VPXUSER ID are re-created by this process - so I guess that ESX and vSphere should know the ID and the password.
Nothing shows up in the var for this - but one of the articles above explains that as a result of the use of the PAM modules.
Just for fun, I also tried using the ROOT password and reallowing ROOT to connect via SSH - but I got the same failures. I also tried lifting the VPXUSER ID privleges but - same questions.
If - goes here - any ideas? I can give other details or screen caputres
ESX3:
#%PAM-1.0
Automatically generated by esxcfg-auth
/lib/security/$ISA/pam_unix.so account required
AUTH required /lib/security/$ISA/pam_env.so
AUTH sufficient /lib/security/$ISA/pam_unix.so likeauth nullok
AUTH required /lib/security/$ISA/pam_deny.so
attempts at password required /lib/security/$ISA/pam_cracklib.so = 3
shadow md5 password sufficient /lib/security/$ISA/pam_unix.so nullok use_authtok
/lib/security/$ISA/pam_deny.so password required
session required /lib/security/$ISA/pam_limits.so
session required /lib/security/$ISA/pam_unix.so
ESX4
#%PAM-1.0
account required pam_per_user.so /etc/pam.d/login.map
AUTH required pam_per_user.so /etc/pam.d/login.map
/etc/pam.d/login.map pam_per_user.so password required
/etc/pam.d/login.map pam_per_user.so sign in required
-KjB
-
Error decoder IMAQdx configure enter with the Mono10 Pixel Format
Hello
I recently encountered the following problem, so I'm trying to capture images across an iPort CL - U3 Pleora USB3 vision.
"Error 1074360265 occurred at IMAQdx configure Acquisition.vi.
Possible reasons:
NOR-IMAQdx: (Hex 0xBFF69037) no decoder available for the pixel format selected. »
I always get this error when I switch the 'Pixel Format' to 'Mono10 '. In my images, I use 'Type of Image' 'levels of gray (I16).
My test code works very well for 'Pixel Format' "Mono8" but not others.
It is also important to note that in MAX, with 'Levels of gray (I16)' and 'Mono10', it works fine as well.
Any help will be appreciated.
Thank you
Harry
Have you changed the type of image requested the default value of 'Auto' to 'Gray levels (I16)' at some point? If you have changed this setting in MAX, and recorded, which would explain the error you see. Your code is only to change the pixel format, and there is no decoder available inside the IMAQdx which takes a Mono8 image and returns an image I16 (you would have to project the image with screws of the Vision).
-
Receive the error code 0 x 80070001 with the installation of Windows 7
I have all new components IE the motherboard and hard drive, in addition to a cpu, I can't seem to get the windows 7 to download correctly anyone with ideas on what might give me a shout out if you please let me know something
* original title - trying to install 32-bit windows 7 error code 0 x 80070001 crazy me anyone who has an idea *.
Hi vonsnap,
Please see the post below with a similar problem and fix possible:
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
Maybe you are looking for
-
SIM card does not work in 6 sec more
When I put a SIM card at 6s, it only show "no service" all the time. But it works with other phones or I phone. How can I do this?
-
Why Sony KLV-32R402 wouldn't play all the. AVI and. Files in format MP4 USB?
I bought a new Sony KLV - 32R402 yesterday LED TV and I am deeply disappointed that the. AVI and. Impossible to listen to the files in the format MP4 USB. Already, Sony doesn't bother to provide support to all video files, unlike other competitors (r
-
My vista restore disk does not start in my computer. Is it possible to get a new drive?
Compaq PresarioSR5130NX with AMD Athlon 64 x 2 processor. Wouldn't start. Console Startup Repair did not help, not even in safe mode. Tried to restore partition, says error. Tried to restore System Restore disk. First authorized disc formatting my dr
-
dv4-1540 volume scroll bar problem
The volume on keyboard scroll bar works but it shows none. The volume level is not visible. Any suggestions to get it back would be welcome. Thank you!
-
SigTool does not recognize my new key
I'm running the BlackBerry password Code base signing for my own service of signatory. I created the key and sent the ITUC leader to me and went through the process of registration with my server However, when I try to sign my code using the Signatur