error on the selection of object in ILLUSTRATOR CC

Similar Questions

• Error in the selection of objects of metadata in the repository obiee 11 g

  Hello

  I created the .xls file DSN. I then create repository, at this time, I am trying to select the metadata object in the data source view and see repository. I tried so many times. But I'm unable to get the data and I got following error. Please solve this problem. Please send any document to do this.

  

  Thank you and best regards,

  A.Kavya.

  Hello

  Make sure that your format of configuration and Notification data in your excel, it should work.

  try to open you are excellent 1st then check the data format and close your excel sheet and then try to import them into your RPD.

  FYI,.

  

  

• Error message: the selected task "{0}" no longer exists. to view the current task, click Refresh

  When I go to start Task Scheduler, I get this message "the selected task"{0}"no longer exists. to see the current tasks, click Refresh"so I go ahead and click on refresh and get the same error message. How can I solve this problem? Any help and any help would be greatly appreciated. Thank you!

  I spent a few minutes and tracked down the problem and a solution. This is a result of work files that exist in the tasks folders that do not have access to (probably) in the registry. Here's how I worked through the issue - will take time, but it has cleared up the problem completely for me:

  1. Open the Task Scheduler, and then click OK when you are prompted with the error. It may seem that you receive again and again the same error, but it is really because of the number of tasks that are broken. Make a note of the number of times that you are prompted by the error of the selected task '{0} '. This is the number of work files that are out of sync with the registry.
  2. Start with the first folder under Windows tasks (Task Scheduler (Local) \Task Scheduler Library\Microsoft\Windows), and then select each file in turn until you receive the error of the selected task '{0} '. This folder contains files that are not synchronized with the Task Scheduler.
  3. Open Windows Explorer and navigate to the folder of tasks (% SystemFolder%\Tasks\Microsoft\Windows) and look for the folder that corresponds to the folder in which you received the error.
  4. For some tasks, you will be able to determine which files need to be removed by comparing the list in the Task Scheduler with the list of files in the Explorer. Some tasks will be only one file in the Explorer, or, in one case, I had 2 and the first was absent. Once Task Scheduler encounters this error is no longer display the tasks so he does the work to get the two in sync a little harder. Once you have determined which files exist in the folder of files but do not exist in the folder of the Task Scheduler, remove these files.
  5. IMPORTANT - close and re-open the Task Scheduler. Once the error, Task Scheduler no longer displays the missions you have to close and restart in order to continue your effort of synchronization.
  6. Continue to select folders in the Task Scheduler under Windows taskbar until you encounter the error once again and repeat the process of determining which file exists on the file system, but not in the Task Scheduler.

  I had 6 files that were at odds with what was shown in the Task Scheduler. Once I deleted all the incriminated files, task scheduler has pulled up without problem.

  Good luck.

• JavaScript exception: error calling the selection function: TypeError: $(...). museMenu is not a function

  Since the update, one of my sites is weird. When you open the Web, that's what he said, "JavaScript exception: error calling the selection function: TypeError: $(...).» museMenu is not a function ". The site is www.hibiscuscuisine.com. If someone could help me understand this point, I would really appreciate it. Thank you

  Hello

  Please follow the complete instructions mentioned in this post - MuseJSAssert: error calling the function switch: TypeError: .museMenu $(elem) is not a function by Zak.

  Let me know if it works

  Thank you

  Ankush

• Why do I get an unknown error when the AI document opening in Illustrator 5.5?

  Why do I get an unknown error when the AI document opening in Illustrator 5.5.? How open/fix documents?

  Did this happen after update to Yosemite? Sorry, but this could be a number of things and not only have a response

  • disable the automatic plugin font activator which is delivered with the police officer, you activate a corrupt police.
  • Clean your cache of police download nuke font it's free
  • reset your prefs AI
  • Delete your printer driver in the system preferences and recreate - Yes, there is a possibility that this can cause this
  • hold off on the update to El Captan for now, even if an update of the system has a chance to eliminate the problem, you're on CS5.5

• I have problems to select any object in Illustrator. When I use the tool Selection (V) it does not select the whole shape, but leaves the contoured selection and the appearance of anchor.

  

  

  In Figure 1 we can see how the object is selected and the option to increase and decrease the size by clicking on the path and dragging it.
  
  
   
   
  
  In figure 2 we can see that the selection has changed and there are now around the anchor Fig . This prevents the increase in size of the figure .
  			 
  In your second picture, the bounding box is hidden.
  Go to view > see the bounding box
  Move B Cmd (Mac)
  Shift Ctrl B (Win)
  		   

• JavaScript exception: error calling the selection function: TypeError: undefined is not an object ('jQuery.browser.msie' assessment)

  Hi all

  my site www.theperthcollective.com is this error on the only secure site (https) on the Tickets Page Workshop tickets

  With ' some files on the server may be missing or incorrect. Clear the browser cache and try again, if the problem persists please contact the author of the Web site.

  Also the Mumblr widget does not work on the secure site.

  Can anyone help? IM at my wits end. I've tried everything I can think of and nothing worked. It is hosted with GoDaddy.

  Thank you

  Hayley

  Have you actually checked it in different browsers? with which browser you test? Since it specifically points to MSIE, this could be a fluke due to browser being obsolete...

  Mylenium

• selection of objects in illustrator

  I do some very specific changes to a batch of images and not to find the best way to speed up the process.

  Here is my method:

  Place an image in illustrator, use the vectorization (6 colors) and expand.

  Now I want to select only the objects in a particular area, which is a triangle, invert the selection, and delete everything outside the shape.

  I found a way to reduce the images with my triangle by adding the selection to the live paint function before expanding.

  I am importing these objects in a CAD program, so it's important that I have actually to delete the rest of the objects, instead of just them, masking because they are always there when I import to my CAD program.

  In addition to individually by selecting and by removing the objects that I don't need, is there a way to instantly choose?

  Is there a way to select all the objects in my triangle shape, or select all objects in a form?  You select the same fill color, etc. will not work because the work inside and outside of my triangle are the same colors.

  I also tried first cropping the image to my triangle shape personalized with photoshop before importing it in illustrator, but I can't seem to find a way to do it without producing unwanted results.

  Any help would be greatly appreciated!

  Vectorization and exapnd. Place the triangle on the top of the trace function that covers what you want to keep.

  Select all, Pathfinder > Crop. This will remove all outside the object (triangle).

• Error in the SELECT query

  Hello

  Oracle version: 11g R2 (11.2.0.2)

  I get the following error message (I'm using TOAD for Oracle last version 12.1):

  ORA-12801: error reported in the parallel query P032 Server

  ORA-01114: block write IO file error (block #)

  ORA-01114: IO error to the file 201 (block # 2165248) writing block

  ORA-27072: IO file error

  Linux-x86_64 error: 28: no space is available on the device

  Additional information: 4

  When you run a SELECT query:

  SELECT field1, Field2...

  OF (REVENUE_SOURCE b

  INNER JOIN ACCOUNTS_CLASSIFICATION one

  WE b.SUB_ACCOUNT = a.SUB_ACCOUNT)

  INNER JOIN REPORT_PRODUCT_ID c

  ON b.REPORT_PRODUCT_ID = c.REPORT_PRODUCT_ID

  WHERE a.UC_BUSINESS_UNIT = 'ANX.

  AND b.report_mm > =.

  (SELECT ADD_MONTHS (MAX (report_mm),-13))

  OF REVENUE_SOURCE)

  AND b.REVENUE_FLAG = - 1

  AND (b.CALLS <>0 b.MINUTES <>0 b.CHARGE_AMOUNT GOLD <>GOLD 0);

  Please notify.

  NOTE: the query worked well for a while, no errors, then all suddenly it became much accentsr and then I started to get the error message above.

  Kind regards

  M.R.

  Hello

  ORA-27072: IO file error

  Linux-x86_64 error: 28: no space is available on the device

  Looks like a system or OS, no SQL or PL/SQL problem problem.  I think you will answer sooner if you check this issue as 'Response' and start a new question in the forum of "General Question":

  https://forums.Oracle.com/community/Developer/English/oracle_database/general_questions/content

  My guess is that Oracle tries to allocate space in the tablespace temp, but cannot because the disk is full.  If you have a full disk, then create the space to this topic.

  I see nothing wrong with your code; Certainly, nothing which would cause an error like that.  The fact that the query has worked well for some time confirms that there is noting wrong with the request itself; It is just triggering a mistake elsewhere.

• Errors in the selection list

  Forgive a stupid question. I have followed the Advanced Tutorial documentation and decided to try some of what I learned in a test application I'm building. However, I keep running into an error. I'm tryign to convert a text field in a selection list with a dynamic LOV generated out of a SQL query. I tried following the example of the tutorial, which gave a SQL query of
  
  SELECT department_id a, department_id FROM oehr_departments b
  
  And it works without fail. I use the following query
  
  SELECT NAME, NAME OF CITY_ORIGIN b
  
  And I get the "LOV query is not valid, a display and a return value is needed, the column names must be different. If your query contains a query online, the first CLAUSE in the SQL statement must not belong to the query online. ' error.
  
  I tried to replace a and b with display_value and return_value. I tried even change it so the value returned is another column of the same table, all with the same result. I saw another post that mentions making sure that the select privileges is granted at the table. However, if I put
  
  GRANT SELECT on CITY_ORIGIN < inset user name or the schema > I get ' cannot grant or revoke privledges to yourself. This happens with the user name or the name of the schema for the environment. I don't know where to go to ensure that this privilege is granted, or even what to look for. Display table in the SQL workshop lists all privledges as being 'no' in the column 'accepted '.
  
  It is for the most fustrating just since this simple single thing is somehtign that I need in several places in the application. Essentially a select list that is populated with the contents of another table.

  Try to run the query below sqlWorkshop

  SELECT 'name' a, b 'Name' OF CITY_ORIGIN

  Looks like the 'Name' column is in different cases

• Errors with the selection event

  Hello everyone!

  I have two problems in an application I'm developing, I would like your help.

  My first problem:

  I have a table, this table each row includes a checkbox. When I click this checkbox to perform an operation, the "Event Selection" event fires. This line has a "Event Selection" event so that when you click on it, this event is fired, but when I click on the checkbox, this event would not be triggered. Someone knows how to help me solve this problem?

  My second problem:

  Button to run the query as the table to be filled with lines. However, when this query returns only one row, I can't raise the event line "Event Selection". When the query returns two lines or more, may perform the procedure normally could someone help me on this problem?

  I appreciate everyone's attention.

  Hello

  "Event Selection" so that when you click on it, this event is fired, but when I click on the checkbox, this event would not be triggered. Someone knows how to help me solve this problem?

  By selecting the check box check must also select the row (you should see the selected highlighted line). Your message does not have a version of JDeveloper, so I blindly suggest to check what you see with a newer version.

  Button to run the query as the table to be filled with lines. However, when this query returns only one row, I can't raise the event line "Event Selection". When the query returns two lines or more, may perform the procedure normally could someone help me on this problem?

  
  

  Well, the listener of selection is more of a selection to change listener and with one line, there is no change in the selection and the single line is automatically selected. So the question is what the code is that the selection listener must invoke.  One option is to call getEstimatedRowCount on the iterator and if there is only one line, run the logic otherwise performed by the select listener

• Video error PBS, "the selected item is not currently available."

  I watched a lot of online content on video.pbs.org and now when I run any video on the site, I get the second 15 Announces and then the error in the title. I "think" (not 100% sure) it started when I upgraded to flash 10. I also think that this is a mistake that most get that are region locked out of some Web sites. For example anyone outside of the United States and the Canada probably cannot show what either on PBS video. Any suggestions?

  Windows 7

  IE and Opera both up to date

  Flash update

  Disabled HOSTS file

  IE all the settings/prefs-deleted/cleaned

  Located in the United States.

  Other sites in Flash work such as Hulu and CBS.com

  Thank you

  -apathybill

  Hi, I do not know if this has nothing to do with the problems that you encounter, but you can read about it. Hardware acceleration is enabled by default. Several other users on the forum have turned it off, and that was helpful.

  The topics listed are additional information.

  If those outside the Canada and the United States being able to display that site or not, I don't know. I don't know there are a few sites in the United Kingdom, that I can't view (U.S.)  :-)

  Thank you

  eidnolb

• Error in the selection of VI in the node of the execution of office

  Hello

  I'm trying to simulate my FPGA screws by using the node running office. I get error (as in the attachment) whenever I select an fpga vi. What's wrong?

  
  

• Moving with the selection tool object changes shape

  Hello

  I have two problems with the new software Illustrator CS5, I was hoping that someone would be able to help me with. First when I try to move or resize a form that I brought from another file to have it changes the anchor points on the image so that it doesn't look like exactly the same thing for example the rectangle part rounded shape changes its corners so that they are not rounded in a manner still more. I chose the whole picture, however when I move it it seems not to move all the anchor points of evenly and that transforms the appearance of the chart.

  The other problem I encounter is that I can't move objects less 1 PX and I can't resize objects less of a pixel, it must always be exactly 1 slices of px. I tried to change the area Increments less than 1 px keyboard in the keyboard increment, however, this doesn't seem to help.

  If you want to be able to help me with these two questions, that would be greatly appreciated.

  On the transformation Panel, uncheck "snap to Pixel grid.

• You try to run LCM make of error during the selection of shared Service application

  Has recently created a new app planning want to import artifacts from LCM in the app. When I click on the newly created in the Shared Services/Application folder application, I get this message.
  
  'Unable to connect "[new planning app]" to ensure that the application is running and the user has the necessary permissions to access this function'
  
  
  If I use the same logon ID to enter in Hyperion Planning I can view/edit the new application of planning.
  
  Search in Oracle/Middleware/user_projects for log files, but nothing to really stood
  
  JTS

  It is a new application:
  1. data source control to ensure that the information provided is accurate and if it still fails to attack, then check the logs and share the error message.
  2 try to create a new application, at the time where you receive a message in the planning of this application created successfully, you should have the application created in the EA.

  See you soon... !!!