Error ORABPEL-05215 without doing nothing

Similar Questions

• Satellite A25-S279 - RTC error, but F1 key does nothing.

  The error I get:

  "RTC * battery is low or CMOS checksum is inconsistent."

  Press F1 to set Date/time. »

  I have read many similar topics with the same problem, but with mine, I can't enter the BIOS if I press the F1 key. Is it normal when occurs the error above? I thought enter the BIOS was not dependent on the RTC battery. Currently, I have the laptop turned on and thinking of leaving at least 8 hours, as many people have said. However, having no answer by pressing the F1 key concerns me.

  Thank you.

  Hello

  Please check you user manual. I put t know what chapter but check the battery info.
  The same mistake has been mentioned in my user manual and here the solution is very simple;
  You must charge the battery of the CCF. This battery provides power to the motherboard.

  You charge the battery for 12-18 hours. Leave the laptop connected to the power supply during this period.

  To set the time and date, you need to access the BIOS. I think you click everything first ESC then F1 to access in the BIOS settings. Try it.

  Good bye

• ORABPEL-05215 in 12 c on the deployment

  I get an error ORABPEL-05215 then deploy my composite to our 12 c development environment. The full message is the following:

  There was a deployment of the composite on WLS_SOA1 error: deployment failed: error occurred during deployment of the component: PPLSFT_CRUD_Item_ABCS_prov to service engine: implementation.bpel, for composites: PPLSFT_CRUD_Item_ABCS_prov: ORABPEL-05215 error during the load process. The field of process meets the following errors when loading the process "PPLSFT_CRUD_Item_ABCS_prov" (composite "ItemServices/PPLSFT_CRUD_Item_ABCS_prov! ("1.0 * soa_4eeed66e-77cf-4aa8-a1bd-ca06e231b92e"): Validation of BPEL2.0 process failed... This error was an exception thrown by the underlying process charger module. Check the trace for the exception in the log (the connection value level debug mode). If there is a patch installed on the server, verify that the ownership of the bpelcClasspath domain includes the classes of patch.

  I looked at the newspapers and it seems to say that my BPEL is not in phase with the doctors in the newspapers.

  [2015 11-18 T 10: 01:36.161 - 06:00] [WLS_SOA1] [ERROR] [] [oracle.soa.bpel.engine.compiler] [host: uxsoadev] [nwaddr: 138.230.209.241] [tid: [ASSETS].] [ExecuteThread: '13' for the queue: "(self-adjusting) weblogic.kernel.Default"] [userId: TX12238] [ecid: da35a4bd-8daa-46af-9d69-10ba1e6dab4c-0000976f,0] [APP: soa-infra] [IDDM: 0000L4RL64SB1FELJ6U4Uf1MIulG00001l] BPEL / PPLSFT_CRUD_Item_ABCS_prov.bpel:135 segment of XPath error 'child::ns4:DataArea' cannot be resolved., suggested fix: check the associated BPEL variable type definition. [2015 11-18 T 10: 01:36.161 - 06:00] [WLS_SOA1] [ERROR] [] [oracle.soa.bpel.engine.compiler] [host: uxsoadev] [nwaddr: 138.230.209.241] [tid: [ASSETS].] [ExecuteThread: '13' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: TX12238] [ecid: da35a4bd-8daa-46af-9d69-10ba1e6dab4c-0000976f,0] [APP: soa-infra] [IDDM: 0000L4RL64SB1FELJ6U4Uf1MIulG00001l] BPEL / PPLSFT_CRUD_Item_ABCS_prov.bpel:135 error Variable "outputVariable" isn't a part named "payload" - check segment of expression "$outputVariable.payload".

  This composite relies on my machine, it seems fair that the MDS is not up-to-date. We tried to empty the cache memory of SDM and restart the server.

  Post edited by: Tom Henricksen

  Hi Tom,

  "You say" importing ns1 in this file is:' and mention "xmlns:ns1 ="http://xmlns.something.com/WSDL/PPLSFT_CRUD_Item_ABCS_prov/V1.0"'. '. But it's not an import, but what a namespace declaration.

  In the dosage of the bpel, wsdl references can be found in three places.

  • "At the top, you will find something like: http://xmlns.something.com/WSDL/PPLSFT_CRUD_Item_ABCS_prov/V1.0" location = "WSDLs/PPLSFT_CRUD_Item_ABCS_prov.wsdl" importType = "wsdl" "/ > or http://xmlns.something.com/WSDL/PPLSFT_CRUD_Item_ABCS_prov/V1.0" location ="oramds://appl/..." SomeStructureWithinAIAMetaData.../PPLSFT_CRUD_Item_ABCS_prov.wsdl"importType ="wsdl"/ >
  • The statement of service:

  http://xmlns.something.com/WSDL/PPLSFT_CRUD_Item_ABCS_prov/PPLSFT_CRUD_Item_ABCS_prov#WSDL.interface (PPLSFT_CRUD_Item_ABCS_prov).

  "callbackInterface ="http://xmlns.something.com/WSDL/PPLSFT_CRUD_Item_ABCS_prov/PPLSFT_CRUD_Item_ABCS_prov#wsdl.interface(PPLSFT_CRUD_Item_ABCS_provCallback) "/ >

  • The Declaration of the component:

  http://xmlns.something.com/WSDL/PPLSFT_CRUD_Item_ABCS_prov/PPLSFT_CRUD_Item_ABCS_prov#WSDL.interface (PPLSFT_CRUD_Item_ABCS_prov).

  "callbackInterface ="http://xmlns.something.com/WSDL/PPLSFT_CRUD_Item_ABCS_prov/PPLSFT_CRUD_Item_ABCS_prov#wsdl.interface(PPLSFT_CRUD_Item_ABCS_provCallback) "/ >

  I hacked these example/snippets based on your information so they are not exact matches. Now, you see above that I have an example in the first bullet that reference the wsdl file for a local wsdl under the project. But I guess in your case, they all refer to the file in the MDS, as my references in bold.

  Files referenced it should be checked. Here in the wsdl file, you have statements of message in the form: name of wsdl: part = "payload" ... Ago this time is was expected to be a missmatch according to the compilation error message.

  In the Panel resources, you can create a connection to your MDS IDE. In my case:

  

  The 'SOA_DesignTimeRepository' is a filebased MDS that points to the location of our MDS structure in SVN WorkingCopy. The latter is Databased connection pointing to the MDS user in the database SOAINFRA:

  

  Allows you to browse the MDS after the paths in your composite.xml to load and validate the document currently loaded in the mds wsdl. Compare them with those of SVN and or your local filebased MDS.

  One used at compiletime in JDeveloper is referenced in the ADF - config.xml in your SOA-Application\.adf\META-INF\ file:

  http://xmlns.Oracle.com/ADF/MDS/config">

  http://xmlns.Oracle.com/MDS/config">

  It can be also wrapper wsdl referenced in the composite.xml or in the BPEL file this import wsdl from the mds or the local soa/bpel of the project itself. Then follow these links. It could be that by importing JDeveloper wsdl copied into the project.

  So here are the references that you should check carefully.

  Hope this will bring you on the right track.

  Kind regards
  Martian

• Error in BPEL 2.0 ORABPEL-05215

  Hi all

  I'm developing a simple BPEL process with JDev 12.1.3.0.0 and when compiling, I don't have any errors. When you deploy I ORABPEL-05215 error. The error description does not say much.

  I search for other posts with this error and it is not a clear solution, it seems. I have checked the version of the suite soa and is the same that jdev (12.1.3) - I use Oracle pre-built VM for oracle soa suite 12 c (with oracle linux).

  Details of the journal are:

  [ERROR] Cannot run com.oracle.soa.plugin:oracle goal-soa - plugin:12.1.3 - 0-0: deploy (deploy by default) on the ProcessSelect project: - > response code = 500, error: there was a deployment of the composite on AdminServer error: deployment failed: error occurred during deployment of the component: ProcessSelect to service engine: implementation.bpel, for composites: ProcessSelect: ORABPEL-05215

  [ERROR]

  [ERROR] Error loading process.

  [ERROR] The field of process meets the following errors when loading the process "ProcessSelect" (composite "default/ProcessSelect!1.0-SNAPSHOT*soa_3053171e-2300-4d0c-845b-a4f47d3bb117"): Validation of BPEL2.0 process failed...

  [ERROR] This error was an exception thrown by the underlying process charger module.

  [ERROR] Check the trace for the exception in the log (the connection value level debug mode). If there is a patch installed on the server, verify that the ownership of the bpelcClasspath domain includes the classes of patch.

  [ERROR].

  [ERROR]-> [help 1]

  [ERROR]

  [ERROR] To see the full error stack trace, re - run Maven with the switch - e.

  [ERROR] Re-run Maven using the X switch to enable logging of full debugging.

  [ERROR]

  [ERROR] For more information about errors and possible solutions, please read the following articles:

  [ERROR] [help 1] http://cwiki.Apache.org/Confluence/display/Maven/MojoExecutionException

  Process has finished with exit code 1.

  Thanks for your help!

  Concerning

  Hello Krishna,

  I tried to deploy it on JDev Integrated server, but the error continued. I inscreased the logging of finest oracle.adf.share.ADFContext have more details about the deployment he self.

  AFTE searcing the deployment log, I found that the deployment was looking for the patterns on the MDS and could not find. I'm not using MDS directly, but I'm making reference to a diagram of another project within the same application. This is probably why the mds has been used for. I moved this scheme for the same project and the deployment worked without problems. I'm going to deploy on the other weblogic server to ensure that everything is ok.

  Again, thank you very much for your help!

  Kind regards

  Antonio

• I just signed up for InDesign and I can't open the creative cloud app gives me an error message to launch an app then does nothing. mention the firewall and all that. Someone at - it help him?

  I just signed up for InDesign and I can't open the creative cloud app gives me an error message to launch an app then does nothing. mention the firewall and all that. Someone at - it help him?

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• After you have installed Windows 10, I can no longer create a PDF of my program Pagemaker 7.0.1. Purchased Acrobat DC, but not joy. Apparently, Acrobat PDF maker does not recognize the .pmd extension. I get errors and various suggestions, but nothing work

  After you have installed Windows 10, I can no longer create a PDF of my program Pagemaker 7.0.1. Purchased Acrobat DC, but still no joy. Apparently, Acrobat PDF maker does not recognize the .pmd extension. I get errors and various suggestions, but nothing works. WHAT?

  Print to Adobe PDF? Why the * & ^ * & ^ V_ $ didn't pay a lot more money to Adobe for an Adobe program that does not work with another Adobe program? Oh, right--they want to move me up (buy) the new Adobe graphics programs. I'll keep sweating this point and will no doubt wind up forking over a thousand$ $$ or so for 'new' stuff I don't need.

• What should I do now that Photoshop CC has encountered an error trying to upgrade. Suggesting to try again does nothing. (49) numbers, but I don't know what that indicates. Help?

  What should I do now that Photoshop CC has encountered an error trying to upgrade. Suggesting to try again does nothing. (49) numbers, but I don't know what that indicates. Help?

  It is recommended that I ask for help, who put me here. What I really need, is a customer - not a chat room service!

  Thanks for your time. Finally, I just uninstalled Photoshop CC and then re-installed. But, once again, thank you!

• Re: update 8.1 - Scanstyles does nothing in Webkit / Firefox / Opera

  I stupidly updated 8.1 yesterday and now I get this message: «Scanstyles does nothing in Webkit/Firefox/Opera»

  ............ I only have Internet Explorer 11. I can't get rid of this message, no matter what I do, and I can't find any help anywhere on Google which is useful or sensible. It seems that many people have had this problem.

  Does anyone know how to get rid of this nuisance without speaking to me chains and things that an ordinary computer user would have no idea about.

  Thanks - in advance - for effective aid.

  I assume that you get this error on some but not all Web sites. The problem is with website wrong to identify your browser IE11 as Firefox and return data of page which can not handle IE11. The only solution for you is to report the problem to every webmaster and wait or change your browser.

• Error PXE 3000 N100, does not start BIOS

  Hello people,

  I recently picked up some laptop second hand and projects for free time and learn a little more. One of them is a Lenovo 3000 N100. I'm not sure of the exact model as the COA sticker is worn. The laptop came without RAM, a hard drive or battery! I am aware that this may be more effort than its worth, but wanted to give it a go...

  With RAM installed, shows the white startup Lenovo screen (sometimes quickly, sometimes takes forever) - if I press ESC, then the following information is displayed:

  Unknown project ID! BIOS version? 61ET32WW

  CPU = Intel (R) Celeron (R) M CPU 410 @ 1.46 GHz

  1023 M system RAM passed

  1024K Cache SRAM Passes

  System BIOS with a shadow

  Video BIOS with a shadow

  CD ROM...

  Initialized the mouse

  Pressing F1 or F12 does nothing.

  The following errors are then displayed, which Google I see is a common problem. However, I can't find a fix that applies to me.

  PXE - E61: Media test failure, check cable of

  PXE:MOF: get out the PXE ROM

  Operating system not found.

  From what I see online, the portable computer tries to boot from a network/LAN. I tried a XP boot CD with no joy.

  I can't access BIOS to change boot priority.

  The RAM seems to work judging by the messages above?

  I tried to put in a blank disk and remove it (tested with novatech adapter USB SATA, HDD seems to work well).

  Is my next option to reset the CMOS battery? I should add that on the first screen, I received at the start of error codes 0271 and 0251 regarding the date system and time and CMOS checksum bad, but after leaving the laptop plugged in all night, they make their appearance is no longer.

  No wonder that BIOS was confusing - it turns out that F1 and F12 are dead keys, and one of the Ctrl keys (I used an online keyboard controller to test). Access key for the BIOS and to the startup list both did not work. I managed to access BIOS by using a USB keyboard. I think I'll try reinstalling the keyboard first, if this does not work, have a go at a personal key, and if it works no - one second hand keyboard. BIOS is not the latest version, but I guess that there is not a huge need to update?

  XP is installed for now, because I don't have spare keys Windows 7. I have a few modules of 2 GB of RAM, so it will move to the 3 GB maximum. Then decide to keep or not! I have a Z60M I prefer, so that this one will probably get donated or sold. Just a shame the RAM is so limited on them.

• Model ORABPEL - 05215 URI is not "file." -Not able to deploy BPEL processes

  While deploying a BPEL process, we get the following error. Not able to understand what goes wrong. Any help on this will be appreciated.
  
  [deployProcess] Deployment of process C:\Temp\10232008\CRMIntegSEBLODLeadConvertAsync\output\bpel_CRMIntegSEBLODLeadConvertAsync_1.0.jar
  
  BUILD FAILED
  C:\Temp\10232008\CRMIntegSEBLODLeadConvertAsync\build.XML:79: There was a problem connecting to the server "abcd.oracle.com" using the "11545" port: bpel_CRMIntegSEBLODLeadConvertAsync_1.0.jar failed to deploy. Exception message is: ORABPEL-05215
  Error loading process.
  The field of process encountered the following errors when loading the "CRMIntegSEBLODLeadConvertAsync" (version '1.0') process: URI scheme is not 'file'.
  If you installed a hotfix on the server, verify that the ownership of the bpelcClasspath domain includes patch classes.
  at com.collaxa.cube.engine.deployment.CubeProcessHolder.bind(CubeProcessHolder.java:286)
  at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:925)
  at com.collaxa.cube.engine.deployment.DeploymentManager.deploySuitcase(DeploymentManager.java:791)
  at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.deploySuitcase(BPELDomainManagerBean.java:448)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:585)
  at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
  at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
  at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
  at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
  to com.evermind.server.ejb.interceptor.system.JAASInterceptor$ 1.run(JAASInterceptor.java:31)
  at com.evermind.server.ThreadState.runAs(ThreadState.java:646)
  at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
  at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
  at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
  at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
  at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
  at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
  at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
  at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
  at DomainManagerBean_RemoteProxy_4bin6i8.deploySuitcase (unknown Source)
  at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:319)
  at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:341)
  at deployHttpClientProcess. jspService(_deployHttpClientProcess.java:376)
  at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
  at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
  at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
  at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
  at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
  to oracle.security.jazn.oc4j.JAZNFilter$ 1.run(JAZNFilter.java:396)
  at java.security.AccessController.doPrivileged (Native Method)
  at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
  at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
  at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
  at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
  at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
  at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
  at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
  at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
  to oracle.oc4j.network.ServerSocketReadHandler$ SafeRunnable.run (ServerSocketReadHandler.java:260)
  to com.evermind.util.ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:303)
  at java.lang.Thread.run(Thread.java:595)

  Hello

  no need for means:
  the xsd/wsdl contains imports another xsd/wsdl which you can delete without getting an error
  (import contains only the elements and complex types that are never used by ref = or type =)

• can someone tell me why I can't update to El Capitan 10.11.2? the line "Show details" gets up and I click on it to make the update. When I do this, it just goes back to doing nothing, so I can never get past this point.

  can someone tell me why I can't update to El Capitan 10.11.2?

  When I try to update "updates available have changed" guest shows up.i click "Show details" prompt to complete the update and when I do that, it just goes back to doing nothing, so I can never get past this point. can someone help me with this, please?

  Thank you very much.

  In some cases, this error message is caused by a problem in the network. Restart your router as your device at wide band, if they are separated. If there is no change, see below.

  This procedure will remove some temporary and cache files. The files are generated automatically and do not contain any of your data. Sometimes they can become corrupted and cause problems like yours.

  Please, back up all data and read this message before doing anything.

  Triple-click anywhere in the line below on this page to select this option:

  /var/folders/zz/zyxvpxvq6csfxvn_n00000s0000068

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ reveal in Finder (or just to reveal)

  the contextual menu.* file should open with a selected subfolder. The subfolder has a long name beginning with "zyx" and ending with "68". Place this subfolder in the trash. Do not move other subfolders with similar names. You may be prompted for administrator login password. Restart the computer and empty the trash.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• Unable to connect. Get error 815 remote server does not.

  Help

  Hello

  Tuesday I could use internet without problems on our windows vista computer.

  On Wednesday, we could not use the internet, and we do not know why?

  My wife downloaded explore 9 Tuesday night, but it would not change anything.

  We continue to receive error 815 remote server does not, but according to its all blank ok.

  Please help we have tried many things but still no luck

  Hello

  Try to uninstall IE9, as long as the problem started then.

  "How to install or uninstall Internet Explorer 9?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9

  See you soon.

• Windows vista 32 bit. Windows Mail receives by e-mail at the start of the program, but when I press send/receive it does nothing more.

  Windows vista 32 bit.
  Windows Mail receives by e-mail at the start of the program, but when I press send/receive it does nothing more.
  Then when I mail windows startup that he gets all of my email, if I send an email to myself, it sends e-mail directly, but by hitting the send/receive button, it does nothing (it shows the Outbox send/receive and said that there are mistakes, but when you check the error tab, it showed no errors). If I close windows mail and that he again, the email is received.  I put it to automatically receive by email after 10 minutes, even there, receiving nothing. I have not any virusscanner, it's a clean install with windows vista 32-bit, and configured the windows Messaging. Got all the updates that are available from Ms.
  I import e-mail by using the import function.
  Someone at - it an idea?

  Greetz Koen

  Try this. You might have stuck messages even if they are not visible.

  How to remove an Undeletable Message stuck in Windows Mail
  http://www.Vistax64.com/tutorials/62560-Windows-Mail-problems.html

  If this does not help, delete the account, restart and add it again.

• Removal of startup parameter error: the specified Service does not exist as an installed Service

  Hello

  I am currently removing two services in Autoruns, for the reason that they are highlighted, and that means that it no longer exists. However, I'm running into some trouble while he was trying to do, I get the following error:

  Removal of startup parameter error: the specified Service does not exist as an installed Service

  For diagnosis, I downloaded my log of Autoruns on OneDrive text file and you can view it by clicking here.

  Thank you

  Party of Lighthouse

  My research yesterday using Google yesterday suggested malware damage.

  Select Start, all programs, accessories, right-click right-click command promptand click run as administrator on the menu drop-down... Type cd\ and press ENTER. Type "chkdsk c:/r" without the quotes and press ENTER. Make sure you include the spaces indicated. Enter it when asked if you want to run chkdsk on restart the computer. Type exit, press ENTER, and then restart the computer.

  Please run the SFC system and say if she cannot fix corrupted files: http://support.microsoft.com/kb/929833

• Build works, Run does nothing

  Hello

  I'm completely new to programming for blackberry-stuff. I have installed the SDK, Simulator, VMWare, got the virtual machine works with the Simulator. I got the IP address and gave it to my project (for example). I can build the app/example. Everything seems to work properly.

  But when I click with the right button on one of the binaries (in 'binary' directory) and "Run as" > "Blackberry the Application C/C++" OR "Dialogue of Application Blackberry on C/C++", it does nothing. Not even an error.

  What I am doing wrong? Someone has an idea?

  Ahhh... it works now! I deleted my project as a whole and tried again, and it worked... took me 3 hours :-).

  Thank you!