Build works, Run does nothing

Similar Questions

• BlackBerry Smartphone camera Zoom has stopped working - trackball does nothing. Very strange loophole.

  I just take a photo using my Curve 8900 still shot camera feature.

  Normally moving the trackball to 12 o clock position zoomed out a bit

  and he moving to position 6 oclock zooms back to 01:00 x

  But today, I noticed that it works at all.   The trackball works perfectly for scrolling up and down in menu lists.

  Also, it works correctly in all directions when you zoom an existing photo.

  It's just that the zoom feature when aiming a shot to take the picture just stopped working.

  What it is on the resolution makes no difference.  I have mine Superfine value and 2048 x 1536 pixels and Flash and the White Balance both the Automatic value.   I can not even a replacement for zoom as Z touch which is not bringing the function.

  Can stop working in the camera, trackball but work in other applications?

  I'm mystified by it.

  Hope someone knows what is happening here.

  --

  Plado

  Dear Plado (that's me!)

  Have you tried the phone then next turn once again as in a reboot of the switch?

  Yes I tried, but it made no difference.

  Have OK you tried to turn off and take out the battery and do a boot cold?

  No, but I'll do and see if it makes a difference!

  Doing a job?

  Yes he did, and the zoom is now working again and has a level of zoom of 1.0 to 2.0 in increments of. 25 x.

  Well I have never! Who would have thought it?

  I'm still none the wiser as to why he needed a cold start or why he's stuck without prompting me.

  It's just one of those things. A kind of BLOB, with eyeballs that palpitate, just one of those things!

  So thank you to all those who felt as you respond to this, the problem is solved, but I still want to know why it stopped working.

  --

  Plado

• I am trying to run creator of disc Toshiba to create an audio cd, but when I double click top he asks me if I want to allow this program to make changes to my computer, if I choose Yes or no it does nothing.

  I am trying to run creator of disc Toshiba to create an audio cd, but when I double click top he asks me if I want to allow this program to make changes to my computer, if I choose Yes or no it does nothing and does not start...?

  original title: Disc creator does not work...?

  Hello

  -Did you change on your computer before the show?

  Follow these steps and check if they help.

  Step 1:

  Test if the problem persists in a clean boot State.

  Note: Make sure that you do not disable while Toshiba disc creator in a clean boot state, and don't forget to follow the steps in the article to restart your computer as usual.

  Step 2:

  Reinstall the Toshiba disc creator and check if that helps.

  http://support.microsoft.com/kb/307895 - for uninstall.
  http://support.microsoft.com/kb/305548 - install.

• Huawei E160 DONGLE... DOING NOTHING NOT WORKIN AT ALL... OH LIGHT DONGLE WORKS ALWAYS... NOT EVEN SHOW IN MY COMPUTER AS CD-ROM... I THINK THAT IS NO SOFTWEAR ON IT... ???

  DONGLE NOT WORKIN ANY, DOING NOTHING... OH LIGHT DONGLE WORKS ALWAYS... NOT EVEN SHOW IN MY COMPUTER AS CD-ROM... I THINK THAT IS NO SOFTWEAR ON IT... ??? Download the updated softwear 4it sum... This does not work... keeps saying CANT FIND PC DATE Cardinal... an other updates--don't do anything... what no gud...

  http://support.Huawei.com/support/ForumCenterIndex.do?colID=ROOTENWEB | CO0000000175

  Contact their support at the link above.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  See you soon.

  Mick Murphy - Microsoft partner

• OPM Build and Run on tomcat does not

  Hi all

  I'm new to OPA and OPM tools and any recently installed the application from Oracle Policy Modeling, so I'm trying to build and run my project "hello world", but I get on a pop-up saying this: "org/apache/juli/record/LogFactory.

  I should mention that I have already configured Tomcat path in the Options tab of the server shipped with my tomcat installation path. In addition, if left blank, the same error message appears.

  I'm looking for a piece of advice on how to complete the configuration of the opm-tomcat to test directly from opm project in a development environment. I'd appreciate any help you can give me.

  Thank you!

  

  

  

  

  When OPM start the Tomcat process, it keeps in memory the Tomcat status reports.  Due to the path of Tomcat pointing to an incompatible version of Apache Tomcat, Tomcat reports a failed State, when you fix the problem (by removing the path of Tomcat) then Tomcat is able to start properly, however it does not send any immediately OPM a new status (because it has not finished to start properly) OPM will always see the previous state , and think it has yet.

  You can't fix this bug, however if you exit and then restart OPM after removing the path of Tomcat, then OPM will forget any previous has no status.

• Blend modes does nothing when I select on them. How can I get these to work when a layer is activated. ?

  Blend modes does nothing when I select on them. How can I get these to work when a layer is activated. ?

  I don't really see your layer panel, but your image, looks like you are trying to mix a layer against the background transparent. You need two layers of mixture. It does not work against a transparent BG.

• I have a new hp running windows 8.1 in turn and have tried to install the adobe reader software.  The installer downloads (1) and I choose to run it, but it is just a blank screen appears.  I checked the Task Manager and it takes memory, but does nothing.

  I have a new hp running windows 8.1 in turn and have tried to install the adobe reader software.  The installer downloads (1) and I choose to run it, but it is just a blank screen appears.  I checked the Task Manager and it takes memory, but does nothing.  After you let it run for 3-4 minutes, I kill the task.  What can I do to get the player installed on this machine?  I tried using chrome, firefox, and explore and get the same results with everyone.

  Try the Installer http://get.adobe.com/reader/enterprise/ offline

• The function ' copy to ' in folio Builder... does not work

  So it would appear that the function "copy to" in folio Builder... does not work,... it DOES well, but when you try and publish the folio, it errors saying there is an article in your folio is the bad resolution for the folio...

  What a bore... ! I thought I'd hit goldust to my retina display folio. :-(

  A strange thing about the feature copy, it's that you can use to add any item to any folio. For example, you can add an article to the iPhone to an iPad folio, but you will end up having to delete this article if you want to preview or publish. In your case, it seems that you've added an article from 1024 x 768 to a folio of 2048 x 1536.

  Using the function "Add" is not an effective method for creating applications. I recommend that you configure your files to import. See the following article:

  http://helpx.Adobe.com/Digital-Publishing-Suite/help/structuring-folders-imported-articles .html

• CREATE / change button apply is not working / doing nothing

  Hello
  
  Sound suddenly, CREATING / apply button the change of my FORM does nothing.
  When I press the CREATE / apply changes button... it displays an error with the following message page.
  
  -HTTP 400 Bad Request
  -The Web page is not found
  
  There has been no changes... it was working perfectly... suddenly I get this error.
  
  No idea... what may be the cause.
  
  Thank you
  Deepak

  Looks like it could be a connection problem. Try turning off all branches and creating a new one that just did a branch simply return to the current page.

• Why the updates do not work? It is located at 0% and does nothing.

  As the title says. It goes into a screen to update and does nothing. I just bought the program less than a week ago.

  Dial 1800-833-6687. they fixed for me.

• Cannot open in a page Web, on the page of the Bank opens a new tab and indicates that the site has moved here, but when you click on the button here it still does nothing

  When I go to internet banking as a clydesdale, it opens a new page to connect, but a few days ago it stopped working with the new update. Now when I click on connect, it says "FOUND the document pushed here." and clicking here opens another page of connection, but after being entered the details the page doesn't load. the same thing happens on other sites, on the other, when I click to read the messages page does nothing, and if I click to open in a new tab the same page is displayed instead.

  GundamGirl said

  Theres been other people having this problem too...

  Yes, for example, that this person- https://support.mozilla.org/questions/1078226 -, but they did not post cost around if any suggestion made a difference, I appreciate your following upward.

  Here are two other things to check:

  (1) connection settings - have they been customized?

  "3-bar" menu button (or tools) > Options > advanced

  Click the mini network, and then click the settings button

  The default value of 'Use system proxy settings' should follow your 'LAN' setting, as well as IE, but you can also try 'No proxy' to see if that makes a difference.

  (2) extensions - test Firefox to turn off Safe Mode

  Firefox Safe mode is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

  Does not work if Firefox: Hold down the SHIFT key when you start Firefox.

  If Firefox is running: You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  and OK reboot.

  Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).

  Any improvement?

• Finder-> sharing of Mail or Notes does nothing

  I have the MacBook Pro (retina, 15 inches, mi 2014)

  It used to work before but not sure when it stopped updating of OS X El Capitan its launch if upgrading the origin of the problem.

  Here are the details:

  1. open Finder

  2. right click on a file (an image or text file) and click on share

  A list appears as a form of share options

  

  3. by clicking on the Mail or Notes or any other option does nothing

  4. after clicking on the option, the Finder disables other options also

  

  And I need to restart the finder because it stops to change records and by closing the window also.

  5. I tried to run the following to reset, but did not work

  /System/Library/frameworks/CoreServices.Framework/versions/A/frameworks/LaunchS ervices.framework/Versions/A/Support/lsregister-tuer - seed

  Can someone help to solve the problem?

  Thank you!

  Post edited by: neeerajs

  Test in a new user quickly will tell you if the problem is system-wide or if your user folder that contains the problem.

  CREATE A NEW USER

  Go to system-> Preferences, create a new user in users and groups.

  Switch to the new user by logging incoming/outgoing or use the fast user switching.

  You can ignore the signature with your Apple ID, unless you want to test iCloud

  By default only the applications Apple will be in the dock in the new user. Go to Applications to open other apps, that you can test.

  You still see the issue?

  If Yes, then the problem is with your core files.

  You can try running the updated Apple combo. Often, it will fix weird questions.

  Update of OS X El Capitan 10.11.6 Combo

  https://support.Apple.com/kb/DL1885

  If not, then the problem is in your user folder.

  Try to remove the com.apple.finder.plist in the user's Library/Preferences folder.

  Restart then check. You may reset some of your preferences after deleting this file.

• Drive slowly and setup.exe does nothing

  Hello

  first: sorry for my English, I'm German, but I'll try my best ;)

  Now my problem:
  My HDD is very slow and is strangely reading (he still only reads the times and does nothing for 2-3 seconds after that).

  But my biggest problem is that if I want to install a program or a game, the Setup.exe is responsible but does nothing (I waited over 10 minutes).

  In addition, by starting the installer, the laptop hangs up (usually it's the Explorer). If I eject the disc, the laptop immediately runs normal.

  I tried a program to slow the car, but it does not work.

  Can someone help me?

  > My HDD is very slow and is strangely reading (he still only reads the times and does nothing for 2-3 seconds after that).
  This may be related to different reasons; in many cases a CURIOUS failure could be the reason to read the issues raised in these cases of disc only new ODD would help

  > But my biggest problem is that if I want to install a program or a game, the Setup.exe is responsible but does nothing (I waited over 10 minutes).
  In my opinion it's can be linked only to the installed operating system.
  It of difficult to say what might cause this exactly but a corrupted OS or registry is always a matter for such problems

  Maybe you need to reinstall the OS fresh OS installation done wonders

• iPod touch generation 5 does nothing when connected to the computer

  Hello

  I had problems with my iPod touch Gen 5 running on iOS 9.2 is not connected to my computer. Boredom? I plug it into a wall adapter and it costs. I plug it into the computer and it does nothing. I tried all USB drives (who all work, as my computer is fairly new, I got it late may last year (2015), and I tested it with my mouse wireless.)

  I tried to restart my PC and my iPod. My computer is a Toshiba Satellite C50D, which is almost a year old and running on Windows 8 (I'm never upgrade to windows 10 no matter how my computer wants me to.)

  In addition, if you could contact me general Grievous, it would be nice. I just want to say that I love him<>

  Can simply not load you through the computer or iTunes will not recognize it?

  iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support

  

• Password accepted but does nothing (admin) user. Locked user account? How can I register as a Admin to change?

  Had problems with Solution Explorer. While changing this and that, I blocked the user accounts. My password is not rejected, but does nothing. How can I get as long as a tool fix my problem?

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]
  [Note: do not enter the brackets!]

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  Remove the installation/rescue DVD and restart the computer. Now, you will be able to log on to the built-in Administrator compatible account now and make your changes. Once you have fixed things, connect to your additional administrative account (implemented by the recommendations below) and disable the administrator built-in again for security reasons.

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.
  MS - MVP - Elephant Boy computers - don't panic!