Error 'problem Nvidea Open GL driver detected"

Similar Questions

• Windows Vista Home Edition Pro CQ5110F, Disk Boot Failure, error BIOHD-2, caveat: no drives detected

  The Windows Vista Home Pro CQ5110F was Ok AM. and the afternoon once I turn on the PC, shows this info:

  Disk Boot Failure, Insert System Disk and press ENTER, (drive witch I do not have).

  Error code: BIOHD-2 and then WARNING: no drive detected.

  It is a Compaq Presario CQ5110F

  What is the best info; To solve this problem,

  Thank you.  REB of mich.

  Hi Mich,

  Seems your HDD fried upward.
  Suggest to contact Compaq and check out what they can offer.

• 1720-smart hard drive detects failure immient

  product name - Z420 HP workstation LJ449AV

  OS - Windows 7 64 bit

  mistake - then the system startup it shows this error

  1720-smart hard drive detects failure immient

  Failed disk: SATA0 (gray)

  In the absence of capital: #B8

  change the status of job worth its rebooted automatically

  only 2 months before our company bought this system, please provide a solution

  The hard drive is faulty and must be replaced. It seems that the computer was purchased about two months ago and is still under warranty. Please contact HP Customer Support in your region to demand service guarantee.

  Please send Bravo

• Every time I try to open a pdf document that is located on a server of our company (so not on my laptop), the drive still shows error. Cannot open the document. Only in EAC I copy the document to my local PC, I can read without problem. Server is mapped

  Every time I try to open a pdf document that is located on a server or in our company (so not on my laptop), reador always shows error. Cannot open the document. Just in case I have copy the document into my local PV, I can read without problem. Server is mapped in my FileExplorer (Win7). So boring and big bug I think.

  Massage of error: "there was an error opening this document. The network path was not found.

  Hi tobiask53385798,

  Could you please try to disable Protected Mode under ' Edit > preferences > (protection) "and see if that helps.

  Let me know.

  Kind regards

  Ana Maria

• Satellite P300-156 - driver detected on \Device\Ide\IdePort1 controller error

  Hello

  I have recently installed a secondary hard drive in my P300-156 and am having some problems with it. I get 11 event IDS in the event log system "the driver detected a controller on \Device\Ide\IdePort1. error" and suffer with very poor performance with this player.

  The drive is new and works fine in other systems and even works ok if I swap bays my P300-156, but the problem with this is that the drive does not fit in the other Bay, as it is quite thick. The player in question is a Samsung HM100UI 1 TB 2.5 "Sata. I also tried other readers in this Bay, and they work well too.

  I am using windows 7 ultimate and the Intel chipset drivers. It's an Intel ICH8M SATA AHCI controller, the 7.0.0.1013 driver version. Have tried different drivers and the AHCI/IDE mode. Also tried a new installation and the problem persists.

  Am at a loss why this disc problems is there anything else someone can suggest to try?

  Thanks in advance.

  > I also tried other readers in this Bay, and they work well too.

  This means that you had problems with the other drives in the second span?
  If Yes, then I guess some problem of compatibility between the P300 and the HARD drive

• HP Pavilion a6645f no hard drive detected BIOHD-2 error

  1st off I'm no computer expert... so I really have no idea what I'm doing, but I've been looking online to the best of my ability and try everything that I have seen that I can understand how to solve the problems.

  First of all, I got the cursor flashing at the top left of a black screen, now I get the boot failure message, insert the disc... I did that dance together and nothing comes of it.  Error cannot be fixed with the scan that it allows me to do using the system disk, I did.

  I managed to access a screen that informed me that I have this error BIOHD-2, no hard drive not detected.

  It's a Seagate Barracuda HD 500 GB 7200.11

  I removed the Panel and went there... insured all caps were closed, tried a different SATA port... and when I go into the BIOS I can not get the comp to recognize any HD is connected... all read 0 MB.

  From my research I found information contradictory on this... some sound like its without a doubt a HD - sound problem is, some say it could be a motherboard problem?  Is - it necessarily one or the other based on the info I gave?  I read that I should try to connect the HD to another PC with a SATA port, but this will affect any PC I plug it somehow? Let's say another computer detects the HD when I look in the BIOS, I'll be able to extract all the files and programs from there? How will I know if the motherboard is the issue and not the HD? As ports have bad or the taking of the HD to the motherboard maybe? It is even probable, if yes?

  What if it is the HD, and I can install an old HD work? Is there a way I could try to extract anything from the Seagate which is in there now?  Unfortunately, the only things that I backed up on an external are some pictures and a few digital scrapbooking files.

  Still, I'm NOT a computer person so half may not even be English in computer science, but I hope I made sense. Laughing out loud

  Oh, and I'm no longer in warranty... HP told me when I called this past weekend when it happened. PC is about 3 or 4 years... don't remember not that December it was bought in.

  Thanks to all those who have actually tried to read and give a sense of my mess

  semperfibc,

  Thank you for your service.

  Several years ago, Seagate had a problem of firmware with the Seagate Barracuda 7200.11 drives. The reader would cease all features. Your beyond any warranty on this drive, and have no options that are financially reasonable.

  Now, you need to install a replacement drive.

  I hope you did your ONCE one Recovery DVD. Otherwise, you will need to buy them from HP.

  You can try an external SATA to USB box with this old disc, but there is no guarantee.

• After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive.

  * Original title: hard drive

  I have a lenovo laptop, processor Intel i3, 500 GB hard drive. After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive. I ran chkdsk looking for bad sector and its display 6000 KB in bad sectors. After completing the audit when it began to restart its stuck when the windows logo appears. What should I do? Reinstall the windows help?

  Run the hard drive HD diagnosis extended CD scan manufacturer to know with certainty the State of the reader.  If your brand has no bootable diagnostics in the link, use Seagate Seatools burned onto CD or SeaTools for a USB key .  Follow this with a full check disk command from the installation media kicked prompt know with absolute certainty the State of the reader.  If he repeated the errors after you run the two tests twice, I replace it or at least keep everything backed up in real time.

  If by chance the drive past diagnosis then compares the steps you've done with the best possible Clean install Windows 10 in the link, you can do more if it varied too - especially if the partitions were not deleted during install.  If you do then I additonally run own Diskpart command command line of the punt media accessible to the first screen after startup by pressing SHIFT + F10 keys, or through the repair your computer on the second screen.

• External hard drive detects but does not open without formatting

  I can't open my external hard drive. In computer science, it shows just K of disk space, but there is no reading of storage. It says 0 bytes of free space and used as 0 bytes space as it will not be open until I have format. Any kind of help, please let me know. Its a backup disk that have been most hard, though don't know if its of any help.

  Hi Deborah,

   

  I imagine the inconvenience that you are experiencing right now. I will help you on that.

  Formatting a disk means configuring the disk with a file system so that Windows can store information in there. Usually, when you install a new hard disk on your computer, it must be formatted with a file system, such as NTFS, Windows can store files that it contains.

   

  Please answer the following questions so that we can better help you.

  1 - is the specific problems of a hard drive?

  2. is it the problem persists when you use different USB ports on the same computer? If 'yes' then tick the question in another computer and let know us the results.

  3. don't you make changes to the computer before the show?

  I suggest to follow the steps below and check. Please move to the next, if only the problem persists after completing each.
   
  Method 1
  Convenience store equipment and peripheral performance such that it can solve some common problems associated with the hardware attached to the computer. Follow the steps from the link below to be executed, which.
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
   
  Method 2
  Run Windows updates and check if you have any availability for USB drivers. You can check the link below.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN
   
  Method 3
  Access the manufacturer's Web site and download the USB, the BIOS and drivers from the chipset and check the issue.
   
  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved.
  Changes to settings are at your own risk.
   
  I hope this helps. Please write to us if you need further assistance.

• Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

  So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

  Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.

• Get an error message that says: we have detected an incompatible driver.  To get a better reading performance and faster, update your display driver.  View the details of the driver: ATI technologies Inc. - AMD Radeon HD 7640 G 3.0.11774 Compadtibilty Pro

  When I start the first items 11, I get an error message that says: we have detected an incompatible driver.  To get a better reading performance and faster, update your display driver.  View the details of the driver: ATI technologies Inc. - AMD Radeon HD 7640 G 3.0.11774 compatibility profile context.  My computer crashes when I click OK.

  It should be in the same place. But do not set your Folder Options to show all files, or you won't see it!

• I just tried to open Photoshop CS6 and received the message that photoshop has encountered a problem wth the display driver and has disabled the improvements by using graphics hardware. Where can I access the update to correct the problem that t

  I just tried to open Photoshop CS6 and received the message that photoshop has encountered a problem wth the display driver and has disabled the improvements by using graphics hardware. Where can I access the update to fix the problem because the link does not show?

  You will have to go the website of the manufacturer of your graphics card and download the current drivers.

• I need to reinstall photoshop elements 8 after having problems with my hard drive. I use MacBook Pro and a timemachine. After restoring the program of the Time Machine, I got the error 6 code: a license for this product has stopt working. How can I cancel

  I need to reinstall photoshop elements 8 after having problems with my hard drive. I use MacBook Pro and a timemachine. After restoring the program of the Time Machine, I got the error 6 code: a license for this product has stopt working. How can I cancel it?

  See here:

  Error "Licensing has stopped working". Mac OS

• Hi, I just bought a new iMac machine and I have problems to open my CS4. Whenever I click on the app, it is what appears... «license for this product has stopped working...»  ' Error: 150:30 ' Please help!

  Hi, I just bought a new iMac, and I have problems to open my CS4. Whenever I click on the app, it is what appears...

  «license for this product has stopped working...»  ' Error: 150:30 ' Please help!

  Hello

  See help here https://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html

  ^ Ani

• Driver detective program does not start due to the error of standard police '"Regular", police Arial doesn't support style.

  Have updated to the latest version without result

  Hello Midasi,

  According to the Windows 7 Compatibility Center, Driver Detective version 8 is compatible with Windows 7. What version you are trying to install?
  See the list here for compatibility.

  I suggest that you contact the manufacturer, PC drivers headquarters for assistance with the question and see if they have updated their software.
  http://www.drivershq.com/

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• MP4 player disconnects, error: error of WPD filesystem Volume driver Code 10

  Hello

  Original title: connection device and after 2 sec is disconnected and there is error of WPD filesystem Volume driver Code 10

  The problem is when I connect my TEAC MP4 Player MP-390 (chip ROCK), it is detected and Windows installs the drivers for it (EM853RB mp4 player usb device) and it connects, it appears in Windows Explorer for like 2 sec then disconnects and begins loading.
  I'm with Windows 7 Enterprise 64-bit SP1. I tested it on another computer with the same operating system and it connects normally. It also connects normally on Windows XP (and remains connected).
  I tried this like 2 years ago and did not work and now I need and I reinstalled windows at least 2 - 3 times since and still does not work.
  Motherboard is ASUS P5Q3 Deluxe (latest version of BIOS 2105), Intel Core 2 Quad Q9550, ASUS NVidia GeForce 9800 GT 512 MB latest drivers. All the Windows updates installed. So what is this some hardware/software incompatibility or what, I tried like 10 solutions that worked for everyone without success.

  Hello

  1. What are troubleshooting you performed?

  2. what anti-virus software is installed on the computer?

  WPD stands for Windows Portable device. This is the driver that allows USB devices for synchronization of media. It is also necessary for ReadyBoost work. The driver is not properly installed and therefore you get this error.

  Follow the steps:

   

  Method 1:

  First, open the hardware and devices Troubleshooter to run the automated troubleshooting services.

  See: Open the hardware and devices Troubleshooter

   

  Method 2: Temporarily disable anti-virus and firewall and check.
  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  
  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  Note: Firewall and antivirus to protect your computer against viruses and other security threats.  In most cases, you should not disable it.  If you have to disable it temporarily, you should reactivate as soon as you are finished.  If you are connected to the Internet or a network, while your firewall is disabled, your computer is vulnerable to attacks.

   

   

  Method 3:

  See the following article in the knowledge base for instructions on fixing the code 10 error messages:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers