Cannot open a session; Windows cannot connect to the political profile service

Similar Questions

• Cannot connect to the user profile

  When I try to log on to my account on the computer at home, it doesn't let me, saying that "the service user profile Service does not log. User profile cannot be loaded. "I had problems loging a few weeks that I connect and keep getting on a temporary profile, but this has happened in the last two days. All other profiles work on the computer without any problem.
  Any help will be greatly appreciated

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
  known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
  Profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
  two with the same password) use to test or difficulty of the other.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Connection failure: ' the user profile Service service failed to connect. User profile cannot be loaded. »

  I'm trying to log on to my account on my laptop, and whenever I try to connect it says

  "The service user profile Service could not connect.

  User profile cannot be loaded. »

  Is it possible that I can fix this or make this standard account administer?

  (If someone can answer, could you please try and explain as simple as possible, thank you)

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account
  in Safe Mode has no default password (so unless someone has changed the password for it)
  should be available).

  Some programs such as the Google update (if you added the toolbar Google, Chrome or)
  Google Earth) has been known to cause this problem.

  Error message when you log on to a Windows Vista-based or Windows 7 computer
  by using a temporary profile: "the user profile Service has no logon. Profile of user cannot
  being responsible.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected
  with a temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK then lift back
  to the admin. This allows clear of corruption. Do the same for other accounts if necessary after
  the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you can't access your old account you can still use an Admin to migrate to a new
  (remember to always leave an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• The administrative user cannot Log in, "the user profile Service has no logon. Pfoile user cannot be loaded.

  OP: Administrative user unable to Log in
  Dell Bostro 1000 using Vista.  When you try to open a session as long as the message from the administrator that is displayed is "the user profile Service has no logon.  Pfoile of the user cannot be loaded.  The administrator can connect to a different user account.  When she tries to reinstall Vista she gets the following message: must remove the power cell.

  Any suggestions?  Thaks

  Rick

  Hi Rick Ramza,

  I suggest you to follow the steps described in the article below and check if this solves the problem.

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. User profile cannot be loaded:
  http://support.Microsoft.com/kb/947215

  Kind regards
  Manasa P-Microsoft Support.

• intermittent connection problem: 'the user profile Service service has no logon. The remote procedure call failed and did not execute. »

  Hello, I'm having intermittent problems with logging in my Windows 7 computer.

  Often after reboot due to applications of Windows Update or any simply restart after the holidays, I have the following message on trying to connect:

  "The service user profile Service has no logon. The remote procedure call failed and did not execute. "

  When I click 'OK', the machine disconnects and try to restart.  This can occur 2 to 5 times before _works_ .  But sometimes it happens at all.  And sometimes he _partially_ connects, but my "reminder" and the "Sidebar Gadgets' not loading not correctly and I get a different RPC error - for example, I lived once a message RPC over Skype cannot work because the remote procedure call failed.

  I'm fairly certain that it is different from the frequently reported issue 'profile of corruption', which was experienced by others.  This problem manifests itself as 'the user profile Service does not log. The user profile could not be loaded "and is reported as a blocking problem consistently reproducible which is set by the 'fixing' of the profile.

  However, the issue I feel is clearly related to an RPC problem is intermittent and not consistent - maybe one of my devices is not reset properly?  Where I can look in the logs of Windows, to provide relevant information on this subject?

  Because my computer was still under warranty, I have raised the issue of Dell and they removed the damaged system file (user account) last week.

  I hope that this will finally fix the problem (previously the error message disappear and reappear after a few weeks later.)  I'll give it a few more weeks to be sure.

• Cannot change user: "the user profile service has no logon. "User profile is not found."

  When I try to do on my side of the computer (change username) it says «user profile service does not log» "User profile is not found."

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• Windows could not connect to the user profile Service

  I couldn't use my own laptop for six months. Whenever I try to connect to my profile (profile/ONLY the Administrator profile), it gives me this:

  "Unable to connect to a windows service. Windows could not connect to the service user profile service. This problem prevents standard users to log on to the system. As an administrator, you can view the system event log to see why the service did not respond. »

  The error itself didn't come for two days now, but the problems still present themselves:

  -My personal profile seems gone.

  -Impossible to connect to the internet (my connection is fine, I use another laptop on the network even in the same House now)

  -Return to default settings

  -Slower than usual start.

  I tried the solutions that have been everywhere online and none of them worked for me. Help, please? I'd like to have my laptop back...

  Additional info: Im using a laptop Windows 7 Dell Inspiron (1564) and there is no point of restoration since before the error. I tried the Regedit fix and it didn't work and it doesn't let me delete the profile owner / administrator as to make a new one.

  To correct this corruption of user profiles, consult a guide to recovery of lost password Windows 7 Home Premium account user, can't connect, connection problem

  Him begins the article with some basic steps you can take and then work upwards through more complicated methods where the easiest do not solve the problem. Please read the intro, but I think it will be the 8 method which solves your problem. Follow the precautionary measures later in the thread as well.

  You could be up & running again within an hour, probably less.

  If you have any questions, then post them here [i.e. don't post in the thread linked as it is already very long]; I'll keep an eye on this issue.

• "Windows cannot connect to the service user profile service.

  SOMETIMES, when I log onto an account says "unable to connect to the user profile service service."  When I log into an administrator account, it displays a black screen and an error that says that my office has been denied access.  It began quite recently after I transferred all my gear in a new case.  I don't know if this has something to do with it.  I spent hours researching this and I can't find a way to solve the problem.  Help, please!

  Hello

  Since you don't have any attempt to Restore Points tapping F8 you can start and select last known good configuration
  Configuration.

  -----------------------------------------------------------------------------------------------------------------------

  If that doesn't work try these - such as using Safe Mode ADMIN and/or the hidden ADMIN account.

  Even if these aren't exactly the same methods please check solutions.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  =================

  If necessary:

  Make sure that all Windows Services are set to default values.

  Start - type in the search box-> find Services at top - double click.

  BlackViper - Services (value all default values)
  http://www.blackviper.com/WinVista/servicecfg.htm

  =================

  You might what to do that - an InPlace upgrade/repair facility that helps keep the
  programs and data backups redundant but are always a good idea.

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How can I fix my account when he says 'the user profile service does not log. User profile cannot be loaded. » ? Help!

  I go to my account and it says that and I have no idea how to fix this, I have all the pics on my account and everything, which is a way I can fix it it and wont lose anything? Thank you!

  Hello elenaax34,

  Read the answer to the same problem as yours in this link.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/the-user-profile-service-service-failed-the-logon/61570922-c072-E011-8dfc-68b599b31bf5

• "When I tried to sign on the computer, I get the following message: the user profile service service failed connection, failed to load the user profile.

  "Whenever I tried to sign up with my password to connect, do the following: the user profile service service failed connection, failed to load the user profile" when I click OK, it disconnects... Help, please

  Go to Safe Mode and do a system restore. See the link below:

  The user profile Service has not logon. User profile cannot be loaded
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/the-user-profile-service-failed-the-logon-user/995955f8-d9d4-4148-840D-c896c3be78b8

  Follow the links on the post.

• Cannot connect to the domain when I want to open a session

  My virtual machine cannot connect to the domain, when I want to open a session and I forgot the administrator password.

  Windows password recovery CD does not work when I want to start.

  I can ping the VM to my machine.

  Is it possible to enter into the machine without the admin password.

  How can I see if the dns on esx works very well.

  Help, please.

  Here you asked two questions:

  1. How to recover password lost admin: the best way is to use windows recovery or just map the Vm cd to iso image of your OS drive. And making the VM to start from the CD and then installation steps use the OS repair option.

  I think that yes the time spent here will u be about even if you use the new virtual machine fresh construction.

  2. how to check the dns works well at esx: what exatcly you mean that... ? just try to ping the esx, try to connect to esx via the web console... and even if you can check network under esx etc folder settings to check the dns.

• User account problems - create a new user profile with the error message: the user profile service service doesn't have the opening of session/user cannot load profile

  I'm very used to make new user accounts and he have done many times, but this is the first time I had trouble with it. I'm just trying to create another user on my computer, but every time I try to create an and log on to it, I get the message: the user profile service service has no opening session/user profile cannot be loaded. I tried to create this profile as a standard user, administrator, and a customer. Does anyone know what is the problem?

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows cannot connect to the Internet using HTTP, HTTPS or FTP. __This is probably caused by settings of firewall on this computer. __

  I recently installed the version of Norton, after that I was unable to use the internet, I thought it was the Norton firewall settings. After having playing with her for 30 minutes, I gave up and uninstalled Norton. I have disabled the firewall, I have reset the default settings. Here is the message I get when I run a diagnostic. A crazy thing is that I can connect to internet when I connected to this same computer as a guess.

  Please help me!

  Windows cannot connect to the Internet using HTTP, HTTPS or FTP.
  This is probably caused by the settings of firewall on this computer.

  Check the settings of firewall for the HTTP port (80), HTTPS port (443) and FTP port (21).

  Hi rhonda9937,

  1. what browser you are using to connect to the internet?

  It is not recommended to keep Windows Firewall disabled on the computer.

  This would happen if the ports are not open in the Windows Firewall.

  I suggest that you open ports in Windows Firewall and check if it works.

  How to manually open ports in Internet Connection Firewall in Windows XP

  http://support.Microsoft.com/kb/308127

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  http://support.Microsoft.com/kb/875357

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Add Printer__ Windows cannot connect to the printer. Access is denied

  Laptops have just loaded with Windows 7 Pro on my domain. Try to load printers to a print server. Print server running Windows 2003 R2.

  When I log in with a user profile, I go to devices and printers------click Add a printer-network printer select------I see a list of printers on the print server - choose the printer that I want to load------asked if I have confidence in this printer - click install drver------opens window files Coping - green bar moves as if it were loading drivers------then just before you get to the window asking if you want to make a default printer. open window that says - Connect Add Printer (X RED) for printer Windows cannot connect to the printer. Access is denied

  Changes to device settings to allow the user load the drivers. Check the security access (everyone has permissions) for this printer on the print server.

  Disable UAC control on the laptop. Group Policy has changed restrictions point and print.

  But this same user can log on to another computer on the network, which has loaded XP Pro and can load the same printers that are denied with windows 7 pro

  As a network administrator, I can log on to laptop computers and load A B and C printers.

  So I can log on as a user and then I can load A B and C printers, but as a user I want printer D I get the same message as above.

  Thank you in advace for your help

  This is the solution I received and seems to work.

  You have to go into the local group policy on Windows 7 computers, and not on the server.

  Go to the Group Policy:

  Computer Configuration\Administrative Templates\Printers\Point and printing Restrictions ss SET TO OFF

  User Configuration\Administrative Templates\Printers\Point and printing Restrictions ss SET TO OFF

• Store Windows unable to download 'we cannot connect to the service you need right now. " Check your network connection or try this later.

  Whenever I try to download an app of any kind on the Windows (games, news or social applications) store I get an error message saying it is unable to download or try again later, this happened last week, & it worries me because I am not allowed to download applications. He said: "we cannot connect to the service you need right now. "Check your network connection or try this later. If anyone can solve this problem for me, it would be a great relief.

  Original title: Windows Store-downloads

  Try the troubleshooting steps below after completing the methods provided by Vinodh.V

  Method 1: Make sure that the Date and the time is accurate

  Open quick run (Windows key + R)
  Type timedate.cpl , and then click OK
  Click the Internet time tab

  Click change settings

  Click update now , and then click OK once the time is Sync

  Method 2: The problem may be caused by the Proxy settings

  If you use a Proxy

  Press the Windows key + X to open the Menu power user
  Click prompt (admin)
  Of that type the below command and press enter

  netsh winhttp import proxy source = ie

  If this does not work, you can reset the proxy settings using below command

  netsh winhttp reset proxy

  3:Fix Windows Update method

  Running Windows Update troubleshooting tool can solve some problems.

  Open Control Panel

  Click on find and fix problems under system and security in category view (or) click on Troubleshooting if you have large icons or small icons view

  Select the fixed problems with Windows update.

  Select Next and then click Finish when the process is complete

  Method 4: Search for the latest Windows updates

  Open quick run (Windows key + R)
  Type wuapp , and then click OK
  Click check updates
  Download and install all pending updates.
  Restart the computer

  Method 4: perform the Scan SFC

  Press the Windows key + X to open the Menu power user
  Click prompt (admin)
  Type in the command, and then press on enter

  SFC/scannow

  Method 5: Upgrade to the Local account and switch it to the Microsoft account

  To switch to local accounts

  Press the Windows key + C to open the bar of charms
  Click settings
  Click change PC settings
  Click USERS or accounts
  Click on your account
  Click Disconnect
  Enter the current user password and click Next
  Click sign out and finishing
  Log on to the user account

  To switch to the Microsoft account

  Press the Windows key + C to open the bar of charms
  Click settings
  Click change PC settings
  Click USERS or accounts
  Click to connect to a Microsoft account
  Enter the current password
  Enter the password of the Microsoft account and click Next
  Click switch