Error: Put an end to this cluster node due to unrecoverable service failure

Our group had some kind of fault which appeared only today. The origin seems to have been almost a month ago, but the symptoms have shown barely.

The node in question is a stand-alone instance running a DistributedCache service with local storage. It produces the following to standard output the Jan-22:

Coherence < error >: put an end to this cluster node due to unrecoverable service failure

It has definitely failed today with OutOfMemoryError: Java heap space.

We lack consistency - 3.5.2.jar.

Q1: Looks like this node failed on Jan - 22 and yet we have not noticed. What is the best way to monitor the status of the node?
Q2: What could be the root cause of such a mistake?

I found the following in the log:

2011-01-22 01:18:58, 296 consistency Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:18:58.296/9910749.462 Oracle coherence EE 3.5.2/463 < error > (thread = Cluster, Member = 33): attempt to retrieve (due to soft timeout) guard {Daemon = DistributedCache}
2011-01-22 01:18:58, 296 consistency Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:18:58.296/9910749.462 Oracle coherence EE 3.5.2/463 < error > (thread = Cluster, Member = 33): attempt to retrieve (due to soft timeout) guard {Daemon = DistributedCache}
2011-01-22 01:19:04, 772 consistency Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:19:04.772/9910755.938 Oracle coherence EE 3.5.2/463 < error > (thread = Cluster, Member = 33): termination monitored running (due to hard timeout) guard {Daemon = DistributedCache}
2011-01-22 01:19:04, 772 consistency Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:19:04.772/9910755.938 Oracle coherence EE 3.5.2/463 < error > (thread = Cluster, Member = 33): termination monitored running (due to hard timeout) guard {Daemon = DistributedCache}
2011-01-22 01:19:05, 785 consistency Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:19:05.785/9910756.951 Oracle coherence EE 3.5.2/463 < error > (thread = thin wire, Member = 33): Full Thread Dump

Thread [reference Manager 10, System]
java.lang.Object.wait (Native Method)
java.lang.Object.wait(Object.java:485)
java.lang.ref.Reference$ ReferenceHandler.run (Reference.java:116)

Thread [DistributedCache, 5, Cluster]
java.nio.Bits.copyToByteArray (Native Method)
java.nio.DirectByteBuffer.get(DirectByteBuffer.java:224)
com.tangosol.io.nio.ByteBufferInputStream.read(ByteBufferInputStream.java:123)
java.io.DataInputStream.readFully(DataInputStream.java:178)
java.io.DataInputStream.readFully(DataInputStream.java:152)
com.tangosol.util.Binary.readExternal(Binary.java:1066)
com.tangosol.util.Binary. < init > (Binary.java:183)
com.tangosol.io.nio.BinaryMap$ Block.readValue (BinaryMap.java:4304)
com.tangosol.io.nio.BinaryMap$ Block.getValue (BinaryMap.java:4130)
com.tangosol.io.nio.BinaryMap.get(BinaryMap.java:377)
com.tangosol.io.nio.BinaryMapStore.load(BinaryMapStore.java:64)
com.tangosol.net.cache.SerializationPagedCache$ WrapperBinaryStore.load (SerializationPagedCache.java:1547)
com.tangosol.net.cache.SerializationPagedCache$ PagedBinaryStore.load (SerializationPagedCache.java:1097)
com.tangosol.net.cache.SerializationMap.get(SerializationMap.java:121)
com.tangosol.net.cache.SerializationPagedCache.get(SerializationPagedCache.java:247)
com.tangosol.net.cache.AbstractSerializationCache$ 1.getOldValue(AbstractSerializationCache.java:315)
com.tangosol.net.cache.OverflowMap$ Status.registerBackEvent (OverflowMap.java:4210)
com.tangosol.net.cache.OverflowMap.onBackEvent(OverflowMap.java:2316)
com.tangosol.net.cache.OverflowMap$ BackMapListener.onMapEvent (OverflowMap.java:4544)
com.tangosol.util.MultiplexingMapListener.entryDeleted(MultiplexingMapListener.java:49)
com.tangosol.util.MapEvent.dispatch(MapEvent.java:214)
com.tangosol.util.MapEvent.dispatch(MapEvent.java:166)
com.tangosol.util.MapListenerSupport.fireEvent(MapListenerSupport.java:556)
com.tangosol.net.cache.AbstractSerializationCache.dispatchEvent(AbstractSerializationCache.java:338)
com.tangosol.net.cache.AbstractSerializationCache.dispatchPendingEvent(AbstractSerializationCache.java:321)
com.tangosol.net.cache.AbstractSerializationCache.removeBlind(AbstractSerializationCache.java:155)
com.tangosol.net.cache.SerializationPagedCache.removeBlind(SerializationPagedCache.java:348)
com.tangosol.util.AbstractKeyBasedMap$ KeySet.remove (AbstractKeyBasedMap.java:556)
com.tangosol.net.cache.OverflowMap.removeInternal(OverflowMap.java:1299)
com.tangosol.net.cache.OverflowMap.remove(OverflowMap.java:380)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ Storage.clear (DistributedCache.CDB:24)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onClearRequest(DistributedCache.CDB:32)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ ClearRequest.run (DistributedCache.CDB:1)
com.tangosol.coherence.component.net.message.requestMessage.DistributedCacheRequest.onReceived(DistributedCacheRequest.CDB:12)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onMessage(Grid.CDB:9)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:136)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onNotify(DistributedCache.CDB:3)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)

Thread [finalizer, 8, System]
java.lang.Object.wait (Native Method)
java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
java.lang.ref.Finalizer$ FinalizerThread.run (Finalizer.java:159)

Thread [PacketReceiver, 7, Cluster]
java.lang.Object.wait (Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketReceiver.onWait(PacketReceiver.CDB:2)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)

Thread [RMI TCP Accept 0, 5, System]
java.net.PlainSocketImpl.socketAccept (Native Method)
java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
java.net.ServerSocket.implAccept(ServerSocket.java:453)
java.net.ServerSocket.accept(ServerSocket.java:421)
sun.rmi.transport.tcp.TCPTransport$ AcceptLoop.executeAcceptLoop (TCPTransport.java:369)
sun.rmi.transport.tcp.TCPTransport$ AcceptLoop.run (TCPTransport.java:341)
java.lang.Thread.run(Thread.java:619)

Thread [PacketSpeaker, 8, Cluster]
java.lang.Object.wait (Native Method)
com.tangosol.coherence.component.util.queue.ConcurrentQueue.waitForEntry(ConcurrentQueue.CDB:16)
com.tangosol.coherence.component.util.queue.ConcurrentQueue.remove(ConcurrentQueue.CDB:7)
com.tangosol.coherence.component.util.Queue.remove(Queue.CDB:1)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketSpeaker.onNotify(PacketSpeaker.CDB:62)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)

Thread[logger@9216774 3.5.2/463,3,main]
java.lang.Object.wait (Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)

Thread [PacketListener1, 8, Cluster]
java.net.PlainDatagramSocketImpl.receive0 (Native Method)
java.net.PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java:136)
java.net.DatagramSocket.receive(DatagramSocket.java:712)
com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:20)
com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:4)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketListener.CDB:19)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)

Thread [main, 5, main]
java.lang.Object.wait (Native Method)
com.tangosol.net.DefaultCacheServer.main(DefaultCacheServer.java:79)
com.networkfleet.cacheserver.Launcher.main(Launcher.java:122)

Thread [dispatcher Signal, 9, System]

Thread [RMI TCP Accept-41006, 5, System]
java.net.PlainSocketImpl.socketAccept (Native Method)
java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
java.net.ServerSocket.implAccept(ServerSocket.java:453)
java.net.ServerSocket.accept(ServerSocket.java:421)
sun.rmi.transport.tcp.TCPTransport$ AcceptLoop.executeAcceptLoop (TCPTransport.java:369)
sun.rmi.transport.tcp.TCPTransport$ AcceptLoop.run (TCPTransport.java:341)
java.lang.Thread.run(Thread.java:619)

Cluster thread
java.lang.Object.wait (Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onWait(Grid.CDB:9)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)

Thread [TcpRingListener, 6, Cluster]
java.net.PlainSocketImpl.socketAccept (Native Method)
java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
java.net.ServerSocket.implAccept(ServerSocket.java:453)
java.net.ServerSocket.accept(ServerSocket.java:421)
com.tangosol.coherence.component.net.socket.TcpSocketAccepter.accept(TcpSocketAccepter.CDB:18)
com.tangosol.coherence.component.util.daemon.TcpRingListener.acceptConnection(TcpRingListener.CDB:10)
com.tangosol.coherence.component.util.daemon.TcpRingListener.onNotify(TcpRingListener.CDB:9)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)

Thread [PacketPublisher, 6, Cluster]
java.lang.Object.wait (Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketPublisher.onWait(PacketPublisher.CDB:2)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)

Thread [RMI TCP Accept 0, 5, System]
java.net.PlainSocketImpl.socketAccept (Native Method)
java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
java.net.ServerSocket.implAccept(ServerSocket.java:453)
java.net.ServerSocket.accept(ServerSocket.java:421)
sun.management.jmxremote.LocalRMIServerSocketFactory$ 1.accept(LocalRMIServerSocketFactory.java:34)
sun.rmi.transport.tcp.TCPTransport$ AcceptLoop.executeAcceptLoop (TCPTransport.java:369)
sun.rmi.transport.tcp.TCPTransport$ AcceptLoop.run (TCPTransport.java:341)
java.lang.Thread.run(Thread.java:619)

Thread [PacketListenerN, 8, Cluster]
java.net.PlainDatagramSocketImpl.receive0 (Native Method)
java.net.PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java:136)
java.net.DatagramSocket.receive(DatagramSocket.java:712)
com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:20)
com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:4)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketListener.CDB:19)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)

Thread [Invocation: management, 5, Cluster]
java.lang.Object.wait (Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onWait(Grid.CDB:9)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)

Thread [DistributedCache:PofDistributedCache, 5, Cluster]
java.lang.Object.wait (Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onWait(Grid.CDB:9)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)

Thread [Invocation: management: EventDispatcher, 5, Cluster]
java.lang.Object.wait (Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.Service$ EventDispatcher.onWait (Service.CDB:7)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)

Thread [Thread termination, 5, Cluster]
java.lang.Thread.dumpThreads (Native Method)
java.lang.Thread.getAllStackTraces(Thread.java:1487)
sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:597)
com.tangosol.net.GuardSupport.logStackTraces(GuardSupport.java:791)
com.tangosol.coherence.component.net.Cluster.onServiceFailed(Cluster.CDB:5)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid$ Guard.terminate (Grid.CDB:17)
com.tangosol.net.GuardSupport$ 2.run(GuardSupport.java:652)
java.lang.Thread.run(Thread.java:619)

2011-01-22 01:19:05, 785 consistency Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:19:05.785/9910756.951 Oracle coherence EE 3.5.2/463 < error > (thread = thin wire, Member = 33): Full Thread Dump

Thread [reference Manager 10, System]
java.lang.Object.wait (Native Method)
java.lang.Object.wait(Object.java:485)
java.lang.ref.Reference$ ReferenceHandler.run (Reference.java:116)

Thread [DistributedCache, 5, Cluster]
java.nio.Bits.copyToByteArray (Native Method)
java.nio.DirectByteBuffer.get(DirectByteBuffer.java:224)
com.tangosol.io.nio.ByteBufferInputStream.read(ByteBufferInputStream.java:123)
java.io.DataInputStream.readFully(DataInputStream.java:178)
java.io.DataInputStream.readFully(DataInputStream.java:152)
com.tangosol.util.Binary.readExternal(Binary.java:1066)
com.tangosol.util.Binary. < init > (Binary.java:183)
com.tangosol.io.nio.BinaryMap$ Block.readValue (BinaryMap.java:4304)
com.tangosol.io.nio.BinaryMap$ Block.getValue (BinaryMap.java:4130)
com.tangosol.io.nio.BinaryMap.get(BinaryMap.java:377)
com.tangosol.io.nio.BinaryMapStore.load(BinaryMapStore.java:64)
com.tangosol.net.cache.SerializationPagedCache$ WrapperBinaryStore.load (SerializationPagedCache.java:1547)
com.tangosol.net.cache.SerializationPagedCache$ PagedBinaryStore.load (SerializationPagedCache.java:1097)
com.tangosol.net.cache.SerializationMap.get(SerializationMap.java:121)
com.tangosol.net.cache.SerializationPagedCache.get(SerializationPagedCache.java:247)
com.tangosol.net.cache.AbstractSerializationCache$ 1.getOldValue(AbstractSerializationCache.java:315)
com.tangosol.net.cache.OverflowMap$ Status.registerBackEvent (OverflowMap.java:4210)
com.tangosol.net.cache.OverflowMap.onBackEvent(OverflowMap.java:2316)
com.tangosol.net.cache.OverflowMap$ BackMapListener.onMapEvent (OverflowMap.java:4544)
com.tangosol.util.MultiplexingMapListener.entryDeleted(MultiplexingMapListener.java:49)
com.tangosol.util.MapEvent.dispatch(MapEvent.java:214)
com.tangosol.util.MapEvent.dispatch(MapEvent.java:166)
com.tangosol.util.MapListenerSupport.fireEvent(MapListenerSupport.java:556)
com.tangosol.net.cache.AbstractSerializationCache.dispatchEvent(AbstractSerializationCache.java:338)
com.tangosol.net.cache.AbstractSerializationCache.dispatchPendingEvent(AbstractSerializationCache.java:321)
com.tangosol.net.cache.AbstractSerializationCache.removeBlind(AbstractSerializationCache.java:155)
com.tangosol.net.cache.SerializationPagedCache.removeBlind(SerializationPagedCache.java:348)
com.tangosol.util.AbstractKeyBasedMap$ KeySet.remove (AbstractKeyBasedMap.java:556)
com.tangosol.net.cache.OverflowMap.removeInternal(OverflowMap.java:1299)
com.tangosol.net.cache.OverflowMap.remove(OverflowMap.java:380)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ Storage.clear (DistributedCache.CDB:24)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onClearRequest(DistributedCache.CDB:32)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ ClearRequest.run (DistributedCache.CDB:1)
com.tangosol.coherence.component.net.message.requestMessage.DistributedCacheRequest.onReceived(DistributedCacheRequest.CDB:12)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onMessage(Grid.CDB:9)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:136)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onNotify(DistributedCache.CDB:3)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)

Thread [finalizer, 8, System]
java.lang.Object.wait (Native Method)
java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
java.lang.ref.Finalizer$ FinalizerThread.run (Finalizer.java:159)

Thread [PacketReceiver, 7, Cluster]
java.lang.Object.wait (Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketReceiver.onWait(PacketReceiver.CDB:2)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)

Thread [RMI TCP Accept 0, 5, System]
java.net.PlainSocketImpl.socketAccept (Native Method)
java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
java.net.ServerSocket.implAccept(ServerSocket.java:453)
java.net.ServerSocket.accept(ServerSocket.java:421)
sun.rmi.transport.tcp.TCPTransport$ AcceptLoop.executeAcceptLoop (TCPTransport.java:369)
sun.rmi.transport.tcp.TCPTransport$ AcceptLoop.run (TCPTransport.java:341)
java.lang.Thread.run(Thread.java:619)

Thread [PacketSpeaker, 8, Cluster]
java.lang.Object.wait (Native Method)
com.tangosol.coherence.component.util.queue.ConcurrentQueue.waitForEntry(ConcurrentQueue.CDB:16)
com.tangosol.coherence.component.util.queue.ConcurrentQueue.remove(ConcurrentQueue.CDB:7)
com.tangosol.coherence.component.util.Queue.remove(Queue.CDB:1)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketSpeaker.onNotify(PacketSpeaker.CDB:62)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)

Thread[logger@9216774 3.5.2/463,3,main]
java.lang.Object.wait (Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)

Thread [PacketListener1, 8, Cluster]
java.net.PlainDatagramSocketImpl.receive0 (Native Method)
java.net.PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java:136)
java.net.DatagramSocket.receive(DatagramSocket.java:712)
com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:20)
com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:4)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketListener.CDB:19)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)

Thread [main, 5, main]
java.lang.Object.wait (Native Method)
com.tangosol.net.DefaultCacheServer.main(DefaultCacheServer.java:79)
com.networkfleet.cacheserver.Launcher.main(Launcher.java:122)

Thread [dispatcher Signal, 9, System]

Thread [RMI TCP Accept-41006, 5, System]
java.net.PlainSocketImpl.socketAccept (Native Method)
java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
java.net.ServerSocket.implAccept(ServerSocket.java:453)
java.net.ServerSocket.accept(ServerSocket.java:421)
sun.rmi.transport.tcp.TCPTransport$ AcceptLoop.executeAcceptLoop (TCPTransport.java:369)
sun.rmi.transport.tcp.TCPTransport$ AcceptLoop.run (TCPTransport.java:341)
java.lang.Thread.run(Thread.java:619)

Cluster thread
java.lang.Object.wait (Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onWait(Grid.CDB:9)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)

Thread [TcpRingListener, 6, Cluster]
java.net.PlainSocketImpl.socketAccept (Native Method)
java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
java.net.ServerSocket.implAccept(ServerSocket.java:453)
java.net.ServerSocket.accept(ServerSocket.java:421)
com.tangosol.coherence.component.net.socket.TcpSocketAccepter.accept(TcpSocketAccepter.CDB:18)
com.tangosol.coherence.component.util.daemon.TcpRingListener.acceptConnection(TcpRingListener.CDB:10)
com.tangosol.coherence.component.util.daemon.TcpRingListener.onNotify(TcpRingListener.CDB:9)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)

Thread [PacketPublisher, 6, Cluster]
java.lang.Object.wait (Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketPublisher.onWait(PacketPublisher.CDB:2)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)

Thread [RMI TCP Accept 0, 5, System]
java.net.PlainSocketImpl.socketAccept (Native Method)
java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390)
java.net.ServerSocket.implAccept(ServerSocket.java:453)
java.net.ServerSocket.accept(ServerSocket.java:421)
sun.management.jmxremote.LocalRMIServerSocketFactory$ 1.accept(LocalRMIServerSocketFactory.java:34)
sun.rmi.transport.tcp.TCPTransport$ AcceptLoop.executeAcceptLoop (TCPTransport.java:369)
sun.rmi.transport.tcp.TCPTransport$ AcceptLoop.run (TCPTransport.java:341)
java.lang.Thread.run(Thread.java:619)

Thread [PacketListenerN, 8, Cluster]
java.net.PlainDatagramSocketImpl.receive0 (Native Method)
java.net.PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java:136)
java.net.DatagramSocket.receive(DatagramSocket.java:712)
com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:20)
com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:4)
com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketListener.CDB:19)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
java.lang.Thread.run(Thread.java:619)

Thread [Invocation: management, 5, Cluster]
java.lang.Object.wait (Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onWait(Grid.CDB:9)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)

Thread [DistributedCache:PofDistributedCache, 5, Cluster]
java.lang.Object.wait (Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onWait(Grid.CDB:9)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)

Thread [Invocation: management: EventDispatcher, 5, Cluster]
java.lang.Object.wait (Native Method)
com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
com.tangosol.coherence.component.util.daemon.queueProcessor.Service$ EventDispatcher.onWait (Service.CDB:7)
com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
java.lang.Thread.run(Thread.java:619)

Thread [Thread termination, 5, Cluster]
java.lang.Thread.dumpThreads (Native Method)
java.lang.Thread.getAllStackTraces(Thread.java:1487)
sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:597)
com.tangosol.net.GuardSupport.logStackTraces(GuardSupport.java:791)
com.tangosol.coherence.component.net.Cluster.onServiceFailed(Cluster.CDB:5)
com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid$ Guard.terminate (Grid.CDB:17)
com.tangosol.net.GuardSupport$ 2.run(GuardSupport.java:652)
java.lang.Thread.run(Thread.java:619)

2011-01-22 01:19:06, 738 consistency Logger@9216774 3.5.2/463 INFO 2011-01-22 01:19:06.738/9910757.904 Oracle coherence EE 3.5.2/463 < Info > (thread = main, Member = 33): Restarting Service: DistributedCache
2011-01-22 01:19:06, 738 consistency Logger@9216774 3.5.2/463 INFO 2011-01-22 01:19:06.738/9910757.904 Oracle coherence EE 3.5.2/463 < Info > (thread = main, Member = 33): Restarting Service: DistributedCache
2011-01-22 01:19:06, 738 consistency Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:19:06.738/9910757.904 Oracle coherence EE < error > 3.5.2/463 (thread = main, Member = 33): could not restart services: java.lang.IllegalStateException: failed to unregister: Distr
butedCache {Name = DistributedCache State = (SERVICE_STARTED), LocalStorage = active, PartitionCount = 257, BackupCount = 1, AssignedPartitions = 16, BackupPartitions = 16}
2011-01-22 01:19:06, 738 consistency Logger@9216774 3.5.2/463 ERROR 2011-01-22 01:19:06.738/9910757.904 Oracle coherence EE < error > 3.5.2/463 (thread = main, Member = 33): could not restart services: java.lang.IllegalStateException: failed to unregister: Distr
butedCache {Name = DistributedCache State = (SERVICE_STARTED), LocalStorage = active, PartitionCount = 257, BackupCount = 1, AssignedPartitions = 16, BackupPartitions = 16}

Hello

It seems that the problem is in this case the call to clear() which will attempt to load all the entries stored in the overflow system to emit events of cache to the listeners. Probably, this requires much more memory, there are lots of Java available, so the OOM.

Our recommendation in that case is to call destroy() as this will bypass the same shot.

/ Charlie

Tags: Fusion Middleware

Similar Questions

  • Could not start the 2nd node - Exception ' this cluster node failed to deserialize the config java.io.StreamCorruptedException: invalid type: 100.

    I use a single node of consistency on Solaris 10, 64-bit 1.7 JVM. It works very well. However, the problems start when I'm trying to start a 2nd node of Eclipse running on the JVM 64-bit Windows that is configured exactly the same as on Solaris. Observing these two newspapers JVMs, I can see that each node detects the other, however, the node that was started the 2nd always gets the exception below and ends. It doesn't matter on what OS I starts it's always the 2nd JVM that gets this error.

    What can be wrong? What is my config? If it wasn't, why the first node set up and working properly?

    Here's the exception:

    2013-09-26 14:15:29, 378 [Logger@9254847 12.1.2.0.0] ERROR consistency - 2013-09-26 Oracle coherence GE 12.1.2.0.0 14:15:29.378/6.164 < error > (thread = Cluster, member = 3): this cluster node failed to deserialize the config

    java.io.StreamCorruptedException: invalid type: 100

    at com.tangosol.util.ExternalizableHelper.readObjectInternal(ExternalizableHelper.java:2348)

    at com.tangosol.util.ExternalizableHelper.readObject(ExternalizableHelper.java:2336)

    at com.tangosol.io.DefaultSerializer.deserialize(DefaultSerializer.java:74)

    at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.readObject(Service.CDB:1)

    at com.tangosol.coherence.component.net.Message.readObject(Message.CDB:1)

    to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.ClusterService$ ServiceJoining.read (ClusterService.CDB:14)

    at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.deserializeMessage(Grid.CDB:19)

    at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:21)

    at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.ClusterService.onNotify(ClusterService.CDB:3)

    at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:51)

    at java.lang.Thread.run(Thread.java:724)

    Stop the Cluster service.

    2013-09-26 14:15:29, 378 [Logger@9254847 12.1.2.0.0] ERROR consistency - 2013-09-26 Oracle coherence GE 12.1.2.0.0 14:15:29.378/6.164 < error > (thread = Cluster, member = 3): asked to stop the cluster service.

    2013-09-26 14:15:29, 378 [Logger@9254847 12.1.2.0.0] DEBUG consistency - 2013-09-26 Oracle coherence GE 12.1.2.0.0 14:15:29.378/6.164 < D5 > (thread = Cluster, Member = n/a): Service de Cluster in the cluster on the left

    2013-09-26 14:15:29, 378 [Logger@9254847 12.1.2.0.0] ERROR consistency - 2013-09-26 Oracle coherence GE 12.1.2.0.0 14:15:29.378/6.164 < error > (thread = Invocation: management, Member = n/a): InvocationService ending because of an exception not handled: java.lang.RuntimeException

    2013-09-26 14:15:29, 378 [Logger@9254847 12.1.2.0.0] ERROR consistency - 2013-09-26 Oracle coherence GE 12.1.2.0.0 14:15:29.378/6.164 < error > (thread = Invocation: management, Member = n / a):

    java.lang.RuntimeException: join query has been abandoned

    at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.ClusterService.doServiceJoining(ClusterService.CDB:86)

    at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onServiceState(Grid.CDB:23)

    at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.setServiceState(Service.CDB:8)

    at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.setServiceState(Grid.CDB:21)

    to com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid$ NotifyStartup.onReceived (Grid.CDB:3)

    at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onMessage(Grid.CDB:38)

    at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:23)

    at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:51)

    at java.lang.Thread.run(Thread.java:724)

    2013-09-26 14:15:29, 378 [Logger@9254847 12.1.2.0.0] DEBUG consistency - 2013-09-26 Oracle coherence GE 12.1.2.0.0 14:15:29.378/6.164 < D5 > (thread = Invocation: management, Member = n/a): service management left the cluster

    2013-09-26 14:15:29, 378 [Logger@9254847 12.1.2.0.0] DEBUG consistency - 2013-09-26 Oracle coherence GE 12.1.2.0.0 14:15:29.378/6.164 < D4 > (thread = Cluster, Member = n/a): delayed ignorant response to the JoinRequest for management 14:15:29.42 2013-09-26

    POF serialization (-System Dtangosol.pof.enabled = true property) is enabled on the first node and disabled the second.

  • Disable "Do you want to put an end to this process?" pop up

    What is a necessity to do to eliminate that pop-up of the elimination of the unnecessary process (do you want to put an end to this process?) that anyone gets any time we use the Task Manager to remove a process? Do it!!

    I was unable to find a way to remove the warning message - I think that it is incorporated into the code.  I searched the registry and found no entry to complete the process and nothing meaningful for same Task Manager - so it must be controlled by a system file which, if we could find the same, cannot be changed by all the means available to us (which means that you or me or probably anyone outside the development of Microsoft).  I suspect that they put there to make sure that a process or service, or that is not finished by accident (which could cause the system to crash).  In fact, despite the annoyances (like you, I too would turn off if it were possible, because I am convinced that what I'm doing), I agree here because the consequences of a mistake can be severe, and too many people are not careful enough when you press the buttons.

    Then I tried to use another program, Process Explorer, http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx which is an improved version of the Task Manager. However, when I went to kill a process, I had again a confirmation warning message - if this isn't a way to bypass the confirmation message.

    Sorry if this isn't what you wanted to hear, but this confirmation message cannot be disabled.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • The application is not responding. The program can meet again if you wait. You want to put an end to this process

    Whenever logged on windows 7, I get the following message:

    "The application is not responding.  The program can meet again if you wait.
    Do you want to put an end to this process"with the choice of the end of the process and cancel.
    When I type complete the process the screen shows my wallpaper and not icons or the bar of windows at all. When I hit Cancel, the message of disappears for around one minute and shows up again.
    I can't use my phone at all in this way, so I hope you can help me.
    Sven

    Reboot the PC by using the F8 key at startup, this time select command prompt, and then follow the instructions for restoring the system;

    http://Windows.Microsoft.com/en-GB/Windows-Vista/Start-System-Restore-from-a-command-prompt

    Select a restore point to a period where it was all is OK

  • When I insert the Cd the runtime error message put an end to this application in an unusual way

    When I tried to re - install my printer using the installation disk message

    "This application has requested execution to terminate in an unusual way.

    A lock symbol appears as well

    The product name of your printer should be C309g or C309a, C309n.  What is it?

  • Csrss.exe & winlogon.exe shown in 'process' of the Task Manager with no user name or from a cache. How can I remove or put an end to this process?

    Csrss.exe is a knowledge trojen or spyware to invade the PC security

    Hi Albert,

    Csrss.exe, this is the part of the user mode of the subsystem Win32 (Win32.sys being the kernel-mode portion). CSRSS means client/server run-time Subsystem and is an essential subsystem that must run continuously. CSRSS is responsible for console windows, creating or deleting threads, and some parts of the 16-bit virtual MS-DOS environment.

    Winlogon.exe is the part of Windows Login subsystem. This process is responsible for managing the security key sequence (by pressing Ctrl + Alt + Delete before you see the logon box), loading of user profiles, the locking system when a screensaver is running and check the activation key for the operating system.

    I suggest you to run the Microsoft Safety Scanner and check if there is no virus.

    Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

    Let us know the status of the issue.

  • Display Maestro: Maunually put an end to this process running program?

    How do I MANUALLY finish the "Screen Maestro" process of the program running?  I say MANUALLY because it seems not a detroit software removalprocess.

    I got the idea to use it on my Apple TV of: https://discussions.apple.com/thread/6555305?start=0 & tstart = 0

    My goal: Watch family movies on my Apple TV through the home (Streaming) sharing using a 3rd PARTY (Non-Apple) program.  Silly me to use a 3rd party software.

    I want to Uninstall this program, but even dragging in the trash, I can't do it, because it gives me the popup window:

    "Point"Screen Maestro"" cannot be moved to the Trash because it is open.".

    Try a Force Quit won't work, because it is not registered.

    I downloaded yesterday - but I seem to have problems my MacBook Pro running at high speed.

    I use ESET Cyber Security, and I see the screen Maestro enlisted in its window of running processes.

    Interestingly, I bought screen Maestro yesterday and the window ESET Cyber Security of the watch Running Processes:

    Under the column 'time of discovery', he said: ""6 months.".

    Under the column "ID of Application Bundle", he said, "com.koingosw.DisplayMaestro."

    -------

    Right-click on the icon of the Maestro of the displayin the window of Finder of my Applications, I cannot select successfully: 'Cyber-Security ESET - add files in quarantine'.

    -------

    Any thinking about the removal of this program?

    1. Use Spotlight to launch activity monitor.
    2. Select the process you want to kill.
    3. Click on the X at the top left of the window.

    TT2

  • Running XP, when I start the computer to the top, IE rises immediately, need to put an end to this, tried STARTUP folder and it's not there. Help!

    Running XP SP3, using IE8, but problem began 18 months ago. I just want to stop having come IE on startup.

    1. Click the Start button.
    2. Select all programs.
    3. Select start.
    4. Right click on Internet Explorer.
    5. In the drop-down list, select Remove.
    6. Click the Yes button.

    Let us know if that helps.

    Marilyn

  • Cannot put an end to the programs

    Whenever a program crashes on my computer, and I try to put an end to this program, I can't do it.  It's as if the pane "end of program" also blocks.  So, I have to turn off the machine.  Anyone know what I can do?

    Instead of finding ways to put an end to the program when your computer crashes, I recommend you to understand why your computer is locking up and fix it in place.

    If turn you your machine (I guess than the power button), you will soon have a new post that looks like this:

    My system does not boot and I see a message like this:
    Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

    Then someone will offer to you try to repair your system with KB307545 and which will not help you either.

    XP has a built-in mechanism that is designed only to help diagnose the locking systems, freeze or crash, and it is very useful.

    I suggest to use (that's what it is) after general troubleshooting basic steps are exhausted.

    You know - easy as questions... What is the program that is locked?

    I would also say everyone with blocking XP problems starting their own new topic so they can be worked separately, or this thread is going to be annoying quickly.

    Thankfully, I'm not a moderator (Fortunately, I don't have no control on the operation of this forum).

    Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

    Please provide additional information on your system:

    What is your system brand and model?

    What is your Version of XP and the Service Pack?

    Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

    The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

    The afflicted system has a CD/DVD drive work?

    You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

    What you see you don't think you need to see?

    What do not you think that you should see?

    Fill in the blank: my system worked well until: _.

    Click Start, run and enter in the box:

    Msinfo32

    Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.

    For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.

    There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

    This will minimize back Q & A and eliminate guesswork.

    Perform scans for malware, and then fix any problems:

    Download, install, update and do a full scan with these free malware detection programs:

    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.

    They can be uninstalled later if you wish.

    Do, or do not. There is no test.

    I decided to implement the points for a new puppy instead of a pony!

  • I often get frequent blue screens on internet sites. Blue screen too fast for me to record specific error message. How can I put an end to the blue screen to get the error message?

    frequent blue screens often to internet sites.  Blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

    en blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

    If your computer is restarted when the BSOD appears, then you must change the by default for what to do in case of system error. It is easy to do, but takes a lot of mouse clicks to get there:

    Start | Control Panel | System | Advanced system settings (need for credentials for the administrator to spend here |) Advanced | Startup and recovery / settings.

    On this screen, uncheck the box under system failure that says automatically restart. The next time the BSOD appears, your computer will not do anything else until you press the reset button, so you'll have all the time you need to read and copy the error codes. Paste here, verbatim, and someone should be able to point in the right direction.

    ``````~~~~`````

    In the control panel choose reports on problems and Solutions (problem of type in the START search box), go to historical problem, right-click your error and choose check for the Solution. You can also examine the details.

    In administrative tools, choose the reliability and performance monitor and click on MonitoringTools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date. See if your plant has started to happen after you installed or uninstalled something.

    It may be useful to eliminate equipment defects

    Type of memory in the search box of start and choose Memory diagnosis

    In a command prompt (type command in the start search box then right click and choose Run as administrator) type

    CHKDSK c: /r

    If you have more than one drive replace C: with the other drive letters.

    Search for corrupted files by typing at the command prompt

    sfc/scannow

    You can clean boot troubleshooting http://support.microsoft.com/kb/331796

  • Outlook Express error: 'your server suddenly put an end to the connection. Error: 10053 and error number: 0x800CCC0F. »

    original title: problems outlook express

    Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Object ", account: 'pop.windstream.net', server: 'smtp.windstream.net', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 10053, error number: 0x800CCC0F

    Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Account: "pop.windstream.net', server: 'pop.windstream.net', Protocol: POP3, server response: '+ OK 3787 bytes', Port: 110, secure (SSL): no, error number: 0x800CCC0F

    There was a problem connecting to your e-mail server. Your password was rejected. Account: "pop.windstream.net" (1), server: 'pop.windstream.net', Protocol: POP3, server response: '-ERR user name or password.', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92

    Connect with your e-mail server. They know what is your password.

  • Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.

    Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Topic "business profile]', account:"pop.bizmail.yahoo.com", server:"smtp.bizmail.yahoo.com"', Protocol: SMTP, server response: ' 451 see http://pobox.com/~djb/docs/smtplf.html. ', Port: 25, secure (SSL): no, Server error: 451, error number: 0x800CCC0F"

    Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Topic "business profile]', account:"pop.bizmail.yahoo.com", server:"smtp.bizmail.yahoo.com"', Protocol: SMTP, server response: ' 451 see http://pobox.com/~djb/docs/smtplf.html. ', Port: 25, secure (SSL): no, Server error: 451, error number: 0x800CCC0F"

    You must make a few changes, not only on outgoing parameters, your incoming parameters also need changes.

    Open your e-mail program > tools > accounts > your bizmail account > properties > servers, under outgoing mail server, check "this server requires authentication" > apply > advanced, under outgoing (SMTP) mail change to 465 not 25. Put a check mark on "this server requires a secure connection (SSL)" > under incoming (POP3) mail, change it to 995 no 110. Put a check mark on "this server requires a secure connection (SSL)" > OK

    t-4-2

  • Error code: 0x800CCC0F, your server suddenly put an end to the connection when sending emails with attachments

    Original title: send Inbox problems

    If I attach a pdf file to my outgoing mail, it lies in the Outbox and will not send then I get an error message, send e-mails with no attactments is no problem

    If you have your anti-virus value analyze them, disable the e-mail scanning.
    It is redundant and doesn't interfere with the transmission, especially with Windows
    Mail.
     
    --
    Dave N.
    MS - MVP (Mail)
    Windows 7 Ultimate 64
    "wynnieboy" wrote in message
    News: * e-mail address is removed from the privacy... *
     
    After my rarlier question if I add an attachment to an e-mail, it will be
    do not send and this is the error message
     
    Your server suddenly put an end to the connection. Possible for causes
    It include server problems, network problems, or a long period of
    inactivity. 'A last try', account: 'imap.aol.com', server:
    'smtp.aol.com', Protocol: SMTP, Port: 465, secure (SSL): Yes, Socket error:
    10053, error number: 0x800CCC0F
     
     

    Windows 7 Ultimate 64

  • put an end to litigation because of the error 119

    System: Oracle 11 g 2 under Oracle VM.

    Question: Oracle falls after the LISTENER. ORA is deleted or corrupted. Any reason?

    Measures: used *.ora files of backup performed during the healthy state and dbstart works fine now.

    But resolved Question: dbstart depends on the availability of files *.ora? What is this error 119 (could not find info on it)?

    Thank you.

    f0c7e0f7-DAB5-4B63-a36c-04b7e8eb552d wrote:

    Hmm...

    Before even that I performed the steps suggested, DB and the LISTENER are rising.

    The issue was when I deleted lisetner.ora and stop the virtual machine (guest OS and DB) and to make it appear the oracle, it throws error 119 dbstart script.

    1. without EARPHONE. ORA in place, "dbstart" script fails to implement oracle services. Why?

    2 put an end to litigation because of the error 119. What does this error mean everything.

    Thank you

    SPFile contains errors.

    Edit the pfile & delete line involving "LISTENER_ORCL."

    then do as below

    sqlplus

    / as sysdba

    Create spfile from pfile;

    startup

  • Expected 'end', but concluded end script error. Anyone can solve this for me? THX.

    I make a joke for my friend program but I can't seem to understand how to fix this script. I even deleted the "defective" part of the script and spruced up:

    display dialog "our processor cannot handle the installation program. You can use the overclock button to use your CPU at full maximum performance. "Model: nVidia GeForce 1.88 Ghz Dual Core i5 CPU" buttons {"Cancel", "Overclock"} default button 2

    If the button returned by the result is "Cancel" then

    on the other

    View dialog box "Are you sure you want to Overclock?" buttons {"Cancel", "Overclock"} default button 2

    If the button returned by the result is "Cancel" then

    on the other

    display the dialog box "Where do you want to install?" buttons {"Macintosh HD"} 1 default button

    show answer dialog "Please enter administrator password to continue" by default "Password" buttons {"OK"} default button 1

    display dialog "error:-492 Macintosh HD not found" buttons {"Cancel"} 1 default button

    display dialog "error:-492 Macintosh HD not found" with icon stop

    end if

    Complete script:

    display the dialog box "You MUST close all applications EXCEPT this one. Macintosh may hang or lose data if some applications are open. It is recommended that save you all work"buttons {"OK"} 1 with icon stop default button

    display the dialog box "PhotoShop install CS5 LS_20" buttons {"Cancel", "Install"} default button 2

      if the button returns the result is 'Cancel' and then

    on the other

    display the dialog box "Install LS_20 CS5 PhotoShop needs to restart. Please indicate the steps to reproduce this problem in the dialog below"default of answer" "buttons {"SEND"} default button 1

      end if

    display the dialog box "You must restart your computer to complete your installation..." buttons {"Cancel", "Restart" key} by default 2

      if the button returns the result is 'Cancel' and then

    on the other

    display dialog "our processor cannot handle the installation program. You can use the overclock button to use your CPU at full maximum performance. "Model: nVidia GeForce 1.88 Ghz Dual Core i5 CPU" buttons {"Cancel", "Overclock"} default button 2

    If the button returned by the result is "Cancel" then

    on the other

    View dialog box "Are you sure you want to Overclock?" buttons {"Cancel", "Overclock"} default button 2

    If the button returned by the result is "Cancel" then

    on the other

    display the dialog box "Where do you want to install?" buttons {"Macintosh HD"} 1 default button

    show answer dialog "Please enter administrator password to continue" by default "Password" buttons {"OK"} default button 1

    display dialog "error:-492 Macintosh HD not found" buttons {"Cancel"} 1 default button

    display dialog "error:-492 Macintosh HD not found" with icon stop

    end if

    Thank you for all who solves this problem

    Add the following line at the end of this code segment:

    end if

    (142671)

Maybe you are looking for

  • iMac can't open pages doc in the cloud

    Now that I'm going to keep the ' 08 version of Pages, I can't open any docs on the iMac.  I have to go to iCloud.com.  error mess. said that I'm missing 'index. XML FILE '.

  • 220VAC measured with CompactDAQ?

    Hi all I'm building a testbed automated, where I need to measure both single-phase (120 and 277VAC) and two phases (208/240V ca... I am aware that nobody calls him two phases, but that's what you are actually measure... anywho) I have single phase wo

  • lines on the screen of the computer

    horizontal lines through my moiniter

  • Error 0 x 80070005

      HKLM\software\Microsoft\Windows\CurrentVersion\Component Servicing\Retry Agent of base HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\Package_f

  • Error of the controller Bus of Serila universal - patch needed!

    Intalled Windows 7 clean hard drive laptop 15-e020U Pavilion and load all the drivers and DriverUpdate use to correct some. However, I STILL have a yellow! on a Universal Serial Bus controller (as well as the Ethernet controller, but that's coz it's