Error reading disk Cluster

Similar Questions

• Satellite P20-304: error reading disk

  When I turn on my laptop it seems to say an error message: "a disk read error has occurred. Press ctrl + alt + delete to restart» I did it several times. I also used the recovery cd, but it was useless. Anyone know what to do?

  Hi Andreas,

  It seems that if your hard drive may have failed. If you tried to restore your system using the recovery CD and it does not also so it seems that it will take a new hard drive.

  Kind regards

• Satellite C650 - error reading disk and the recovery disk does not work

  Hello

  I have a toshiba Satellite C650, who has recently developed with a disc read error. I want to access the command prompt to try some possible solutions I've read on the internet.

  I made a Windows 7 recovery disk using my other acer laptop which has also installed Windows 7 64-bit. When I use the recovery disk and it loaded the files etc it evokes just a black screen and the cursor.

  Does anyone have any ideas as to why this is happening?
  I tried to start my computer acer laptop from the recovery disk and it worked fine.

  As is - this does anyone have suggestions as to why I get the message "disk read error - press ctrl, alt and delete to restart?

  Any help would be appreciated, thanks.

  On this virtual path, it is not easy to offer the exact diagnosis, but of course, there must be a problem with the HARD drive. Can you get a second one for test purposes and exchange it. Just to be sure if the HDD is troublemaker.

  But there is something else:
  > I made a Windows 7 recovery disk using my other computer acer laptop...
  Sorry, but I don t understand this. Can you please explain what you did exactly?

• Equium A100-549 - fails to start - error reading disk

  My A100-549 is 4 months old and worked fine. today when I started it, I got the message "a disk read error occurred press ctrl + alt + delete to restart»

  When I do cela the computer tries to start, but I got the error again. I've considered using the product recovery disc, but I just got the same error message!

  Can anyone help?

  @rich1005
  You didn't answer the question of redhawk s!
  I agree with the previous user, and I think that it s a hardware failure. In this case, you can do anything you can ask only the service partner for the help and for the replacement of the device

• Our computer is running slow and sounds like it runs all the time, then gives error reading disk

  Our computer is running slowly.  Looks like it is running all the time.  It will turn off by itself and I say disc read error.  You need to restart all the time.  A lot of the time, he does not let us start windows.

  Original title: slow slow slow

  Robert,

  Try to run the "chkdsk" how to perform disk error checking in windows 7 http://windows.microsoft.com/en-us/windows7/Check-a-drive-for-errors

  UTC/GMT is 02:19 on Saturday, November 10, 2012

• SMART hard disk attributes failed and writing error reading disk

  Hello

  I bought the HP touchsmart tm2 - 2150ca in 2010. So far, everything was fine until last week, the laptop fell and the computer is not able to start. Disk-read write error is popping up. Tried to get the diagnosis of HDD makes nothing happens, is stuck in the initialization screen. Bought a new HDD for it than this one will. Only problem is I have donot have recovery discs. Is there a way I can get it? What is the procedure to get the made disk partition and install the system, hp, etc. in a different partition tools.

  Thanks in advance,

  Hello

  You are welcome.

  First of all, about the recovery Partition, it is never established if you use a set of recovery discs HP to provide a way conveient to reinstall an OEM of Windows version - however this is not really necessary if you're creating a 'detail' to perform the installation, you can always reinstall using this option if the need arises.

  As you will be perfoming the Setup from a retail windows installation disc, this will give you the option to create a partition (use the Option on the Setup screen).  Unless you have a particular need to create customized partitions, you can leave Windows Installer for the "unallocated space" - this will automatically create a "System Partition" which is hidden and the main partition of Windows C.

  HP_TOOLS (E) partition will be created automatically by installing the UEFI diagnostic software.

  Kind regards

  DP - K

• I get an error: reading or writing to disk, etc. When you try to export

  Hi out there,.

  I constantly get this error: hearing has encountered an error reading or writing, etc. as mentioned above, recommend save etc and restart. It does not help.

  I recorded some local gospel singers and mix just by a few beats for them, etc.  I had this error before.  any ideas on how to solve this problem?  I hate losing so much work.

  Thank you and asante sana, greetings from Tanzania

  ryclark,

  Well, just my hard drive, then tried externally, just a mac at home.  Thanks for the idea...

  I have 200 GB free... in any case, I tried earlier and it worked without problem.  Maybe it was just a glitch that close and restart corrected.  Sometimes, you get so deep in the work that you have forgotten that a glitch is sometimes just a small problem.

  Thank you!

  Neema and Warren

• I can't install my game START OF DARKNESS BLADE, coz every time I try it repeat, error 1305. Error reading file!

  I have a START BLADE OF DARKNESS game, whenever I try to install an error message appears saying: Error 1305. Error reading the file.

  I don't have a clue guys! Any suggestions would be greatly appreciated.

  Thank you...

  Micky.b

  [Moved from comments]

  Hey Micky,

  Until we provide troubleshooting steps, we would like to know as a result of information from you.

  (1) what version of the Windows operating system you have installed on your computer?

  (2) how you try to install the game? What is a disk installation or a set of file?

  If you try to install the game on Windows 7 or Windows 8 so I would like to inform you that there are few games that are not compatible with these operating systems. You should check from the link below. However if it shows that the game is not compatible then you can install the game in compatibility mode.

  Compatibility Center

   

  http://www.Microsoft.com/en-in/Windows/compatibility/WIN8/CompatCenter/home?language=en-us '

  You can follow the links given below to install the game in compatibility mode.

  For Windows Vista: Make older programs run in this version of Windows

  http://Windows.Microsoft.com/en-in/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

   

  For Windows 7: make older programs run in this version of Windows

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  For Windows 8: make the programs more compatible with this version of Windows

   

  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  If you still experience the issue I suggest you to contact forum support Severance Blade Of Darkness.

  Feel free to write us if you have any further questions. We will be happy to help you.

• to start windows (xp sp3) frequently produces an error message "error reading volume of c '. what closing it persists

  My os is windows xp (sp3) I can not solve. Help me, providing a perfect solution
  the error is "error reading the volume of c.

  Hi Nithin 1990,
   
  Run the check disk (chkdsk) to solve this problem.
   
  Here is an article that will give you the information to do the same:
  How to perform disk error checking in Windows XP

• Whenever I try to play a Blu - Ray, I gett error "unsupported disk in the drive.

  Original title: cannot read Blu - Ray discs

  System specifications:

  Windows 7 Home Premium 64 Bit pack for system integrators, fresh and first time install on hard drive below.

  Power of 10 DVD standard. (Also have FLV player and installed AVG Free)

  ASUS black drive Blu - ray SATA model BR-04B2T<- this="" is="" the="" problem="" drive.="" i="" have="" already="" updated="" the="" drivers="" and="" firmware="" via="" the="" asus="">

  LITE-ON DVD/CD Writer black SATA model iHAS424-08

  OCZ Vertex Series OCZSSD2-1VTX60G 2.5 "60 GB SATA II MLC internal Solid State Drive (SSD)

  EVGA 121-BL-E756-TR LGA 1366 Intel X 58 Micro ATX Intel motherboard Micro SLI

  Intel Core i7 - 920 Bloomfield 2.66 GHz LGA 1366 130W Quad-Core Processor Model BX80601920

  EVGA GeForce GTX 285, 6 GB of Ram and a nice samsung screen.

  The ASUS drive has yet to play a disc on this particular machine. Whenever I try to play a Blu - Ray, I get the error "unsupported disk in the drive." I did the following:

  -J' tried Corel WinDVD 9 Plus, same error 'is Disc.... »

  -The works of car well on a machine I built with windows XP 32 bit SP2 and running an evaluation version of powerDVD 10. On the first blu - ray I've tried, he asked in what area I would set my player (a, B, C). I haven't seen such a screen on the above 64 bit computer, even after that fresh installs of windows 7 on the other drives.

  -The same error on a separate Win7x64 install on another drive hard, even computer. ASUS incredibly useless people say it works very well on a new installation of Win7x64.

  -Have done all the steps on this post: http://social.answers.microsoft.com/Forums/en-US/w7pictures/thread/a5bf1f3f-33c4-4502-ae2e-42cbd8f9d341

  -Following the steps on this link:http://support.microsoft.com/kb/929461

  As you can imagine, it is frustrating and draining. My skill level is high with the material, but I am really confused.

  I use PowerDVD 10 Standard, which is supposed to read blu - ray discs...

  Link n ° 1 says "hardware changes may not be detected!" after the execution. No change to playback of blu - ray, I always get this message from PowerDVD 10: "There is a disc with a format not supported in drive D:"

  Second link gave the final "could not identify the problem.

  The region settings tab does not appear when I go into Device Manager. I get general, Volumes and driver details.

  Bringing the window even for my second DVD drive (LITE-ON DVD/CD Writer black SATA model iHAS424-08) makes performance a DVD region. The region is set to 1, with 4 changes remaining. However, do not use blu - ray region #, they use region A, region b... no such parameter does not appear in any window of properties of material I have seen yet.

  The third link you posted also gave the same results: no DVD region setting is available for the reader that is supposed to read blu - ray discs.

  I had almost the same problem on almost the same system with almost the same software.

  * HP DC9700 desktop with BRD Lite-ON D-4B1S
  * Windows 7 Ultimate 64B
  * PowerDVD 10

  But together with ANYDVD HD (http://www.slysoft.com/en/anydvdhd.html)

  THIS MARKET!

  Try it!

• Error 1305: Error reading from file C:\Program Files\Microsoft Games Flight Simulator X\Scenery\World\texture\041b2su6.bmp.Verify that exists it and that you can access

  When I want to install Flight Simulator X I get the error error 1305: error reading from file C:\Program Files\Microsoft Games Flight Simulator X\Scenery\World\texture\041b2su6.bmp.Verify that exists it and that you can access how to fix?

  Hi Johannholm,

  Thanks for posting your question in the Microsoft Community. We are happy to help you.

  Go through the suggestions of this link and check if it helps you to install Flight Simulator game.

  Error message when you install a Microsoft game or a mapping program

  http://support.Microsoft.com/kb/258496

  NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 3A proposed in the above mentioned link.

  WARNING CHKDSK:

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Hope it will be useful. If you still have questions, please reply and we will be happy to help you.

• HPE-140F - why aren't my card reader disks does not?

  Hello

  I don't know what is happening to here so let me explain what happened to my PC.

  I had a hard disk crash.  Before the crash, I had the following text:

  C programs, D is the original Image, not sure where the DVD player was, then I got my card reader disks with the I don't know being the H drive, SD card reader and then I got my data like drive J (separate disk) disk, more a drive external backup like K and everything worked very well.

  I replaced the main drive, because that's what was the crash, I also spent 1 to 2 TB hard drive, now I have C & D drives is the same DVD as F drive and my drive of current data, e, my external backup hard drive is the same that it is a K.  When I go to Explorer by looking at my computer, I don't see card reader drives, even though I know that if I insert an SD card into the reader, he appears to be one I'm driving.

  Different maps I have as long as they don't suddenly change the drive letters (all user folders are not there on C), and I would like to see the card reader disks.

  Someone at - it ideas?

  Thank you

  Bill

  I finally found the setting to display hidden records.

  They can explain it better that I can and I am happy that it is not my computer.

  Show/hide files, folders or drives

  I think I understand also why power drive letters, before I added the disc after everything has been installed, so it was the next available drive letter in disk management, now it comes before everything else, so I finally answered my own questions.

• Satellite L755 - 16 K BD - Rom Drive is not reading disks

  My drive Satellite L755 - 16 K BD - Rom is not reading disks
  My OS is Windows 7 (64-bit)

  so, how can I fix?

  Good question. It will be nice if everything should be easier.

  Do you have problems with all discs or just some specific discs?
  Have you tried to clean the lens?

• Diagnostics Windows network, the error reads 'Problem with wireless adapter or access point' and fails to solve the problem.

  «Problem with access point or wireless adapter»

  Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, Maria

  HI Maria,

  ·         What operating system is installed on your computer?

  ·         You have installed the latest drivers for wireless network card?

  Follow the suggestions below for a possible solution:

  Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: See these articles for solve wireless problems:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if that helps.

• Server internal error - read the server has encountered an internal error or misconfiguration and was unable to complete your request.

  I get the following error message when you try to access one of my hotmail accounts:

  Internal Server Error - read the server has encountered an internal error or misconfiguration and was unable to respond to your request. Reference #3.269102cc.1330033628.4ef0aa7f.

  What is this error and how to fix it?

  Thanks Ellie

  I get the same message... must be a problem with hotmail.