Error recovery disc burning

Similar Questions

• Satellite L300D - error recovery disc creator

  I have a Satellite L300D and you must return to the original settings. But the recovery disk didn't work (C:\Program Toshiba Toshiba Recovery Disc Creator\TRORDCLauncher.exe the specified path does not exist). Now I dind't know what to do.

  you have burned a disc before recovery? I ask because it's not possible to make it more - the specified path does not exist

• Satellite A300 - displays error recovery disc creator

  Hello

  I have a Toshiba Satellite A300 (PSAGCE) and I created the recovery by using the "TOSHIBA Recovery Disc Creator' disc but I did this a few months ago, but now the disc is scratched, and when I am formatting my computer it gives me an error when loading files. So I decided to create another disc, using the "TOSHIBA Recovery Disc Creator', but she also give me an error with one of the files during the creation of the disc. What should I do now?

  I have a friend who has a Satellite A200, can I use the disk? I did a printscrean showing the error. Sorry the bad English, I'm Portuguese...
  [http://img199.imageshack.us/img199/4030/semttulovj.jpg |]

  Hello

  It is good that you posted a screenshot of the error, but perhaps you can translate it into English, it would be more useful.

  In any case, the disks that you use to create the recovery disk? I m using Verbatim DVD-R media. It worked perfectly for me and I can recommend this path.

  In addition, you can see the Toshiba page for an update of the firmware of your CD/DVD drive.

  Finally and above all, I doubt that for Satellite A200 recovery disk will work for you also. The models are different

• Error recovery disc

  Hi, I have a HP dv7 Notebook PC with windows 7 comes to buy. The other day I went to the recovery disks and had to interrupt the process at the beginning, as I have a DVDRW discs which he wouldn't. Now when I try to go back to create the discs it tells me I can create ONE set of recovery discs and won't let me go any further. What can I do? The computer was pretty smart to tell me I had the wrong type of discs, but he is not smart enough to realize that I never had to make the records I needed. Any help greatly appreciated, thank you.

  Hello

  Call HP (the telephone number can be found on the corresponding link below) and explain that the Recovery Media Creator is unable to create a viable set of recovery disks and ask them to send you a free replacement of these disks together.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Recovery disc Burns but fails on "verification" - error 20

  I used SONY DVD - media and LG DVD-.  Both failed at the stage of verification with the error 20.  Both media have always been solid as a rock.  When burning it isn't is no way to slow down the burning rate in case that could be the problem.  The PC is a new HP with Vista Home Premium p6030a.   Any ideas before I try the road to HP?  Trevor

  Thank you all for your contributions.  I phoned HP today and they send a set of discs free of charge.  I will also review the updates of the firmware for the DVD RW which can anticipate any future problems, if it was a problem that contribute

  Trevor

• Unable to create recovery discs, burning fails - F:\07007XSP.swm

  whenever I try to create the recovery disks it starts to burn, then I get the error:

  Cannot read the next file.
  F:\07007XSP.swm

  (error code: 020150-20-00000000)

  How can I solve this problem?

  The problem is that you used is not compatible DVD disc.
  Test different DVD. I use TDK DVD-R and I think it's very good brand.

• Satellite Pro S300 - 10-fc06-0002 error recovery disc

  I have a Satellite Pro S300 the recovery partition has long been eliminated and the computer was working fine until I opened an e-mail allegedly Fed Ex, ERROR!

  A got a malware virus really bad.

  So I bought a vista business recovery disk for my computer and wiped hard drive t.He. During the installation of Vista, I get a preinst5.swm missing on the first disc.

  After that I skipped the file I got an error of 10-fc06-0002 on the second disc and a cancellation of the installation.
  I looked online for this error and a lot of people have had the same problem. Nobody seems to know what to do.

  I installed Vista Home Premium from a disk recovery Dell with no problems, however, when I tried to change the product key to that on the computer I got the key was not good for the version of hp vista.

  So what to do.
  I think Toshiba made a good product, but the recovery disk, they sent me for $30 was bad.

  I thought that I could copy the disc on another computer and copy a good version of preinst5.swm and try to make a good recovery disk, but I don't have a lot of confidence in Toshiba software.

  Help

  If you have a model of cell phone US please try to ask for help on Toshiba we forum http://forums.toshiba.com/t5/Computers/ct-p/c_laptops/tshb
  Maybe someone can help with this. To be honest, this error message is not known to me and the correct address for help should be closest to Toshiba service provider.
  Call them, explain the situation and ask for help.

  This error must be known to them and I hope they can give good advice you how to solve this problem.

• Satellite L505-S5990-F3-F200-0002 error recovery disc

  Hello

  I have a Toshiba Satellite L505-S5990 and I had to do a system restore. I ordered the recovery of Toshiba and equip the number one disc discs. It took me to the Toshiba Recovery Wizard, I used the option completely format the hard drive, all partitions of wiping then in market and so fourth. I put in disc 2 when you are prompted, and click Next. Everything was fine until the end, when I received an error code F3-F200-0002 at which time the only option was to click on next, then the system would be closed. I then tried restoring this time using the default options to factory restore on the restore disc. I put in disc 2 when you are prompted and click Next. Then, I received the error once again at the end of the restoration.

  What can I do now?

  Hi DustinB22,

  I had a similar problem last month that the recovery disk didn't work correctly. First I thought that the discs are not ok (striped), but then I used a Microsoft Windows disk to format the HARD drive first. After that, I tried again the Toshiba Recovery disk and it worked now!
  So you should try that too. As I have written, you can use a Microsoft disk to format the HARD disk or another tool. Maybe it works

  If this isn't the case, you can also install Windows on this drive from Microsoft.
  Check this box!

• Satellite L300 - error recovery disc creator - disk is scratced or dirty

  Hi all

  I tried to create recovery disks for my L300, but after a 1-2 minutes, the program stops and says: 'Please check if the disc is scratced or dirty, if so, try again with a new disc' error code 0E01B5-26-2A030C00.

  I tried this many times with many different DVD in recent weeks, but this continues to be!

  The machine is old just a few weeks and run Vista family premium advice please as Im stuck.

  Thanks for reading.

  Hi mate

  I think that you have used are simply not fully compatible disks and supported.
  In my case I couldn't t create the recovery because the CD/DVD drive was not able to manage it.

  Is that many CD & DVD discs supports properties and different standards and in many cases, CD/DVD players have a lot of difficulties to manage different disks.
  I think you should just test some DVD-R discs.

  I use DVD-R and was able to create the recovery disk.

• Error recovery disc on the Satellite A200 - not enough of space

  After reformatting my laptop toshiba recovery disks will not reload windows because it says that I don't have enough space on my hard drive.

  The error message is the following:
  There is not enough space on S3A6134D502. You need extra 2.34 GB to copy these files.
  S3A6134D502
  Free space: 1.42 GB
  Total size: 1.46 GB

  It seems that he has created a new partition which allows to load windows on the partition being too small.

  Problem is that you have modified the standard settings for the recovery procedure.
  First partition on the disk HARD is called WinRE partition and this partition has a capacity of 1.5 GB.
  When you start the recovery procedure and simply click OK or NEXT all went well.

  I guess you have chosen configuration option and click on the second option to install the operating system on an existing partition.

  What you probably want to do is to install the OS on the C partition only in the second hope or all other partitions will not be deleted or formatted. Right?
  I tested several times on P200 and A200.

  It won't work then only option is to erase the whole HARD drive and before recovery installation starts all existing data and partitions will be deleted and formatted.
  So before you begin installation OS Backup all important data and install OS without changing anything.

• Tecra A10: error recovery disc creator code: 0D00E4-F0-00000000

  Hello

  Last week, I bought a new laptop Toshiba Tecra A10.
  Today, I try to do a restore, an error pops up: no recordable discs are recognised on your PC or another application is using that drive. Please check the status of the drive.
  (Error code: 0D00E4-F0-00000000).

  Please help me solve this problem.

  Hello

  The error means that your CD/DVD drive is being used by another application or the inserted media is not registrable.

  I think that the error appears because of the inserted disc.
  I have read several times about similar problems and in most cases this error appears because the inserted DVD is not 100% compatible.
  In my opinion, you should try different DVD from different manufacturers.

  In my case the s TDK DVD - R worked well but run it s still a matter of CD/DVD that is installed in your laptop drive

  In order to check some disk and report your results

• error recovery disc cto envy 15 j110tx

  This is the error that I get at boot time...

  [22:53:29.29] ChkErrBB.CMD: detect an error in the PININST_BBV.
  [22:53:29.31] ChkErrBB.CMD: check c:\system.sav\logs\BurnBootWarn.log
  [22:53:29.31] ChkErrBB.CMD: or, visit c:\system.sav\logs\BurnBootMerge.log
  [22:53:29.32] ----------------------------------------
  [22:53:29.32] critical error condition has been detected to BBV1...
  [22:53:29.32]
  [22:53:29.32] see the following text of the file if it exists.
  [22:53:29.32] - c:\system.sav\Logs\BurnBootWarn.log
  [22:53:29.32] - c:\system.sav\Logs\BurnBoot.log
  [22:53:29.32]
  [22:53:29.32] Switch to 2ndCap WinPE and the show [Recovery Manager] corrupt dialogue.
  [22:53:29.32] because the dialogue of RM cannot appear on the screen [start] on Win8 environment.
  [22:53:29.32] customer may not notice that RM already shows the error dialog box.
  [22:53:29.32]
  [22:53:29.32] ----------------------------------------
  There might be an unexpected reboot during the PBO clean or last...
  The process will cause panic CTO because the image isn't normal...
  There might be an unexpected reboot during the PBO clean or last...
  The process will cause panic CTO because the image isn't normal...
  There might be an unexpected reboot during the PBO clean or last...
  The process will cause panic CTO because the image isn't normal...
  There might be an unexpected reboot during the PBO clean or last...
  The process will cause panic CTO because the image isn't normal...
  There might be an unexpected reboot during the PBO clean or last...
  The process will cause panic CTO because the image isn't normal...

  Please see if someone can help me...

  Your laptop is on the list in the web HP document to the following address.

  Enter the BIOS and change the date to 02/01/2014.

  If this date does not work, try another one is before 06 14, 2014.

  Once the date is changed, run the factory image recovery.

  I had the same problem with my current loan of the HP Touchsmart Ultrabook XT spectrum product.

  http://support.HP.com/us-en/document/c04433980

• Recovery Disc Creator Error - Satellite A300-1GN

  First of all, sorry for my English, but it is not my mother tongue. On my problrm, short and simple technique:
  I use Toshiba Satellite A300-1GN with Vista 32 bit. I tried to create a recovery using Toshiba Recovery Disc Creator disc.

  I inserted a new DVD disc in the DVD burner and program was working fine but suddenly that he will miss just give an error with something like that 'there was an error in the calibration of reinforcement sector. "Error code: 0E01B5-26-00037304"

  What's wrong?

  What should I do to create the disc of tha? I can only add, that I turned my system of any virus just as it was said in manual Toshiba, but it did not help.

  Pleas, help.

  Hello

  I agree with the codes for the TDKs are not bad and I had a very good experience with these media.
  I tried to burn the recovery disk using another brand and I've damaged 3 DVD + R discs
  Then I went to the TDK DVD - R and it is ok

  I think that questions is related to the question of the compatibility between the discs and the STRANGE...
  So it of really worth to test different media!

  Good luck

• 10-FC06-0002 - HARD drive recovery disc error load XP and Windows 7 very well

  OK, so I have a Toshiba laptop I want to restore because I had used it for school and he had a lot of things about what I didn't need and turned slowly. Rather than take things one by one, I thought it would be better to start from scratch. I jumped in the recovery discs, I created, restarted the computer and booted from the DVD. I have chosen all the settings to restore the computer to out-of-the-box settings and a time window that says «copy files please wait...» "After that the screen disappeared after 10 minutes or so, another window flashes on the screen for a split second (has not yet the chance to see what it was) and then an error window pops up error 10-FC06-0002. The only thing I can do is shut down my computer, and it does not start after that. After trying several times, I decided to come here.

  I know what you say. "Before coming here, search or something, there are tons of problems like that here." Well, I'm looking, and all the results told me to "make a copy of your drive and see if it works, if not its your HARD drive ' tried to make an exact copy of the disk using a tool to copy DVD of Google, no dice. I tried copy the files from the disc on the desktop on disk, did not work. Copied files on an old thumb drive and booted from it. The same problem. Make one. ISO disk image and it has burned, triggered the error as well. No matter how I try to run the restore files, the same error message prevails. This would point to the hard drive being broken, correct? This is where I get lost, Windows XP installs flawlessly and works faster that any other computer I used it, as well as Windows 7 beta does.

  -------

  Does anyone know a fix to this error so I can restore my computer? Should I order new disks of recovery at Toshiba? How much do cost?

  -------

  I created these recovery disks about a week after the computer is turned on for the first time. The only software on the subject was the preloaded software, Mozilla Firefox, and MSN Messenger. These two programs would have caused corrupted recovery discs to bring?

  THANKS FOR ANY HELP IN ADVANCE! : D

  -----------

  EDIT: Should probably tell you some info on the laptop. It is a Toshiba A200 - AH6, try to restore Windows Vista recovery disks created in the Toshiba Recovery Manager.

  Hello!

  To me it sounds like it's your Toshiba Recovery disk is noisy or something else. It seems that the disc can't be read properly.
  I doubt that s a hardware issue because you tried a XP and Windows 7 disk successfully.
  But as Akuma says that this can happen also due a poor quality DVD media.

  In any case, I think you need to order a new drive Toshiba Recovery directly.

  Finally and above all the software that you have installed (Firefox and MSN) didn t cause corrupted recovery disk. Theoretically, you can install what you want before you create the recovery disk. The recovery disk creator burning a disc bootable with the files in the folder HDDrecovery on the second partition. All programs that you have installed must be installed after recovery again.

  Good bye

• Recovery Disc Creator Error - Satellite L300D

  Hello

  First of all, sorry for my English, but it is not my mother tongue. About my technical problem is very simple: I use Toshiba Satellite L300D-13 b with Vista 32 bit. I tried to create a recovery using Toshiba Recovery Disc Creator disc, but when I start the program (Toshiba Recovery Disc Creator) gives me this error:
  "Cannot find the HDD Recovery folder on the second disc of the first hard drive. There is no valid disk HARD recovery environment on this computer.

  How can I create my recovery disk?

  Thank you.

  Hello

  New Toshiba laptops are delivered without recovery CD/DVDs and using Toshiba Recovery creator tool, you must create one. Toshiba has delivered laptop with factory settings. that means recovery image is recorded on the second partition in the file called HDDRecovery.

  When you start the creator Toshiba Recovery tool it contains the data of this file and burn it to support empty. If this file is removed or deleted the application clearly says the file / data that is / are missing.
  I don't know what you've done in the past, but now, you will not be able to create this recovery DVDs.

  You can order the new copy under https://backupmedia.toshiba.eu/landing.aspx
  Of course it is not for free and you pay for it.

  Good bye