unusual of PCI 6154

Similar Questions

• Only $line0 of digital output NI PCI-6014 accessible, other lines do not react in Labview

  Hello

  I have a NI PCI-6014 card with a card BNC 2120 DAQ and Labview 8.6. I'm trying to transmit digital signals, but only the digital IO port $line0 responds to my orders, while lines 1 to 7 don't work at all in Labview. With the measurement and Automation Explorer, I can access all the lines and change their State. I also tested another card (NI PCI-6154) with another card (CB-37F-LP) and had the same problem there (only $line0 of the digital port0 reacted, others don't). I have attached the VI very simple, I used to test digital ports. If the problem is known and what can I do about it?

  Thank you!

  Good never mind digital ports do not not Boolean signals, except $line0, which strangely accepts integers...

• PCIe-8381 corrupter BIOS

  I have a PCIe-8381 on one card motherboard chipset Intel. Problem occurs after the marketing of the SMU-1065 chassis, then the PC. PC reports BIOS is damaged and recharging before starting without any additional problems. Everything seems fine, Max with all the cards in the chassis reports normally. Reboot PC works fine - have only problem when turn on the power for the first time. Should I get to the BIOS compatibility software?

  Hi testlabrlp,

  This seems very unusual, give you have already propelled on the chassis before you turn the PC and that the message is only thrown once the first startup of your PC.  How long do you expect to power on your PC after feeding the PXI chassis?

  It is not a compatibility problem, since restarting the computer solves the problem and you are able to see full working system.  You have the latest version of the BIOS installed?  It is perhaps that an upgrade is needed to solve the problem.

• PCI-6221 PFI0 start trigger is stray signals reading

  We have a card PCI-6221 attached to a SCB-68 in a control console, we've made dozens of times. However, this time, we will have problems with the beginning of PFI0 relaxation. Operation of the actuators 24 v remote (cable to DAQ card but operated through manual switches) triggers the beginning. We tried a shielded cable and everything is grounded. There is no parasitic voltage coming into the SCB-68 box. We sent also all the other analog I/o box. It's just the son of trigger start going. What is unusual, is that if we give a thread to the PFI0 (Terminal 11) who does not finish anywhere, we just hold in the air, do not cross any other thread, running our actuator valves still initiates the trigger. If we remove the wire, it does not raise. It's almost as if she receives wireless signals. But how wireless receives + 5V to trigger I don't understand. We also tried to use a spare PCI-6221, same known issue work. When you view the PFI0 in MAX, flipping the switch actuator will cause the counter generate 400 + charges. A normal release with our power switch usually generate 10-20-count indictment. We are really puzzled. Thanks for any help!

  Don't have not an answer to the first question, will have to research.

  THA Cabinet is wired the same, the only difference is that we added a transformer so that the system can run on the seas, but has not actually been hooked again, sitting in the Cabinet.

  Yes, we used a cable leading to one end. We tried the ground at both ends, the same results. I also waved to the cable in the air and a people in the head with it, it made me feel better.

  Don't think on the unused entries in the Earth. Personally, I think that the PFI0 is to be triggered with less than the + 5V, the scope is the very low voltage reading.

  But I found a solution. I mentioned in the original post that trigger actuator, just once, causing 400 + edge detections/counts when viewing in MAX. It is a large number of charges in such a short time. So I programmed in a digital filter using a min pulse width. ".". 00256. Eliminating the 400 + short bursts of any signal. I used the example of filtering VI in this knowledge base article:

  http://digital.NI.com/public.nsf/3efedde4322fef19862567740067f3cc/9ece7dbe7df338bd86256f8600734a41?O...

  For those who have similar problems, there is no physical change, just incorperate of wiring of the filter.

• unusual warm-up and drainage of battery fast after the update for sierra

  everyone knows unusual warm up their MacBook pro and the draining of battery faster after the update to Mac OS sierra?

  my MacBook 2015 mid pro gets hot when I close the screen and put it to sleep, as well as drainage of battery faster than usual. everyone knows the same?

  Try to use the activity monitor to see where will your battery life.

  1. go to the docking station
  2. Click on finder
  3. Click the menu go
  4. Choose utility
  5. Double-click activity monitor
  6. Click the stack tab

  See you using your battery?

• Switch boot SSD on PCI slot

  Crucial startup 2006 Mac Pro Tower 2.1 with a 525 GB SSD drive I replaced my HARD drive. Can I move the Crucial SSD on the PCI slot and get the same results or better?

  Yes, you can with a PCIe card that accepts drives 2 1/2 inches.

  However by

  https://eShop.MacSales.com/item/OWC/SSDACL6G.S/

  You can't win anything since the

  • 2006-2007 mac Pro. These models use slot PCIe 1.0 which cannot be configured (even with the utility Expansion under OS X) Accelsior S address as something but as a path of first generation card. Thus, Accelsior S performance will be limited to 190-200 MB/s of throughput. If the data rate maximum speedis you want, we recommend the installation of a 2.5 "OWC Mercury SSD in an open Mac Pro drive Bay.

• Mac Pro 5 1-PCIe Configuration

  Hello

  I have upgraded my Mac Pro 5, 1 (model mid-2010) with a few changes/additions PCIe and need some advice. Frankly, I was surprised by the fact that the Expansion Slot utility was not usable here and the old interface to help me refine the best configuration. Reading about the possible configuration options started his contradictory between reseources. Anyway, this is what I have:

  Slot 1 (x 16) - ATI Radeon 5770 graphics card

  Slot 2 (x 16) - ATI Radeon 5770 graphics card

  Location 3 (4 x) - empty (no physical space due to above)

  Unit 4 (x 4) - card Sonnet PCI Tempo SSD Pro Plus

  So, is this look of effective configuration for the priority of the data read/write verses performance graphics performance?

  Peace,

  Dr. Z.

  The utility of PCI slot is not usable on the 2009 to 2012 Mac pro.

  The allocation of housing-gears the 2009 Mac Pro 2012 is fixed, not configurable and is exactly as you say: the two 16 x slots, the two upper slots lower slots are 4 x speed, but of "provide support for up to 16 x cards" (in other words, they use the biggest connectors, but everything beyond 4 x is not connected).

  Your installation seems fine. Some users prefer to leave the top slot open for a better circulation of air above all the cards. But as you say, you do not have this option.

  4 x is fast enough for this SSD card. Which is about as fast they do these cards so far. Extra speed as a 16 slot x could not possibly serve in the drafting of this article.

• Why this keep happening ' unusual use - account temporarily locked Down?

  This problem just started. It's happened twice in five days. I ' did no unusual activity and don't understand why I'm locked out of Firefox. Any help will be greatly appreciated.

  Thank you.

  Bluesdrummer

  I think it's a message from Google, so I think that you have Google start page or your extension Gmail notify immediately access your Google account and send this message.

  Could check you the suggestions in these discussions of support for Google:

  • Help of use - account temporarily locked down - unusual! -Forums of Google products
  • "Unusual use - account temporarily locked down" twice in 24 hours (after sending emails only 3)-Forums of Google products

• MacBook pro 13 inch 2012 pcie ssd upgrade

  Is my mid-2012 13 "MacBook Pro compatible with PCIe SSD upgrade? I want to remove the internal optical disk and edit it in the PCIe SSD, so that I have 2 internal storage. Going to do?

  Your mention of an optical drive tells me you have a MBP non-retine.  PCI and PCIe SSDS are NOT compatible with your MBP.  You can install a card standard 2.5 "SSD in your MBP and still experience a significant increase in performance.  I suggest OWC SSD and Crucial.

  Ciao.

• How to remove some unusual applications of my apple ID

  How to remove some unusual applications of my apple ID

  I don't know what you mean by unusual apps, but you cannot delete apps from your purchase history at all. All purchases are for always connected to your Apple ID and cannot be deleted.  You can hide and expose the purchases.

  Hide and expose the iTunes Store, App Store or purchases made on iBooks Store - Apple Support

  If you want to remove third-party applications not used, press on the icon of the app until it wiggles and then tap the X in the corner of the icon. When you are finished, press the home button. You can also go into settings > general > storage & use iCloud > storage > storage management. Let the list of load applications. Tap the one you want to delete and delete on the next screen.

  You can not remove the preinstalled applications.

• Update of El Capitan 10.11.5 does card PCI does not work

  When I upgraded to 10.11.5 my PCI-424 card (it's a MOTU audio interface card) has stopped working. Rather than appearing as 'PCI-424 In' it appears now as "optical / digital» Ditto for out when I go to System - Sound preferences.

  I took the card and rebooted and it still showed the "digital optical". I put the card in another location and the same.

  Clearly El Capitan is not to recognize the PCI card correctly but I don't know how to do this.

  Also, I spent in El Capitan 10.11.5 10.8.5 Cougar.

  Help, please...

  Thank you!!!

  It's what MOTU has to say about it. You have the right driver?

  http://motu.com/NewsItems/motu-and-OS-x-El-Capitan/

• PCIe crush on Mac Pro 2008

  Hi all

  Looking for a PCIe card compatible thunderbolt 2 thunderbolt drives put in my Mac Pro 2008 Tower. Possible? Recommend?

  Thank you

  BB

  There is no such cards and until Intel control tokens required to implement love at first sight, it will never be. You do not miss anything. They do not exist.

  Love at first sight, a computer to use leaving the factory "shot of lightning-ready". There is little this computer manufactured by Acer - but they're just computers of ThunderBolt where sight of material has been placed on an optional daughter card, and then were made optional save money.

• PCI card does not work

  Greetings,

  I just bought a PCI Express card to add USB 3.0 to my Mac Pro (2008 model), but it seems to be recognized; Information system called "driver installed: no ' on this card, which is at least in the list of cards.

  The accompanying CD has several folders (unknown which is the one I want) but I couldn't find a good.

  It's a PCI Express "Delock" card, but there is no product name, except the description.

  What can be done to correct the problem?

  Is specific USB what card?

  Most require drivers provided by the manufacturer?

• DVI PCI Card/s for G3 minitour

  I am a new Member of this forum and I hope that someone has the necessary answersI. I have a Power Macintosh G3 Beige minitour @ 333 MHz, and I'm on OS 8.5.1. There is a reason, I must stay with OS 8.5.1.

  I am wanting to know if there is a Dual-DVI PCI card that will work in this machine, so I can run two monitors via DVI in order to get a higher resolution than is available with VGA. My understanding is that VGA tops out at 1280 x 1024 and I need just a little more.

  If there is not an available Dual-DVI card that will work with my setup, how about two single DVI cards? If, by chance, there are two ways, that would be better and two monitors can also..., run off PCI cards without involving the port of regular monitor of the factory. If the port of the factory to be used, is there an adapter (or adapter cable) him/DVI.

  I know it's several questions, but get them out of here, in my first post may save some back.

  Thanks for any help, Tom

  Hi & welcome!

  In fact, VGA will give you more resolution than DVI.

  Radeon 7000

  The 32 MB memory DDR (Double Data Rate) will also help, allowing your computer to display very high resolutions up to 2048 x 1536 at 60 Hz if your analog monitor supports. Resolutions up to 1600 x 1200 are supported using digital flat screen, depending on the individual abilities of your LCD monitor.

  http://www.Macworld.com/article/1004789/radeon7000.html

  http://www.xlr8yourmac.com/graphics/radeon_7000_feedback.html

  There are faster cards still better, but more rare and the fastest I had were Formac cards, can have a couple somewhere here.

• Constant Crash logs and unusual behavior spotlight?

  Mac Book Pro (early 2011) 17 "quad i7 16 GRAMS / 500 Gb Crucial SSD MX200

  Hello

  I get constant crash messages in my console. There is a behavior unusual spotlight as well.

  It all started with a hint of delay and backup times with reading of error message "Impossible backup, please try again later"

  Spotlight is indexing for long periods of time. Research presented so I tried these possible solutions.

  1 (obvious) adding hd/external references to the list of privacy then removing to re-index... No.

  2 disable indexing with the terminal and re-activation controls... No.

  3 find 10.7.5 additional updated with the hotfix for extended projector or activity of time machine,.

  then focus on disabled,

  ran disk utility to repair permissions,.

  welcomed my backup run and assumed all was well. I thought that I re activated spotlight and the problem has been resolved, but apparently my console suggested projector has been disabled so I have reactivated the indexing and have had some problems of backup again... (continue)

  During my diagnosis, I consulted a friend who looked at my console. He mentioned disk i/o errors and I have maybe need to replace my hard drive soon - I was considering upgrading ssd anyway - so I did the installation and upgrade of RAM.

  Now, my attention is directed to my messages to the console.

  I get the minute incident reports or more. mdsworker showing an invalid address (?-?)? I don't have a lot of knowledge in regards to the console and how to read the messages, but I do not recognize the word or the fault accident. Any help is appreciated. Can't post a report if required. Thanks in advance!

  It seems too short to be a report, but perhaps a summary? A lot of these...

  30/05/16 11:02:43.316 PM ReportCrash: com.apple.message.domain: com.apple.crashreporter.writereport.crash

  com Apple.message.signature: mds

  com Apple.message.signature2: UNBUNDLED | ??? (???)

  com Apple.message.signature3: FAB1F6BC2EBB82D0BC47F031B7127505

  com Apple.message.Result: No.

  com Apple.message.summarize: YES

  Check if the MBP had the kernel panics.  If so connect and confirm it with these instructions:

  https://support.Apple.com/en-us/HT201753

  Ciao.