Error replace the certificate SSL - inventory services with using SSL - please help automation tools

Similar Questions

• Replace the certificate SSL of Insight Log with a CA signed cert

  I'm trying to generate a cert for Insight Log using the method described in this blog post (below) using an automated batch file

  http://www.derekseaman.com/2012/09/VMware-vCenter-51-installation-part-2.html

  The chain.pem file resulting includes my cert and chain cert CA.  When I try to add to the Insight Journal, it is said that the cert is invalid.  Is that you guys can provide suggestions on how to change this piece of lot code to use Log Insight?  The meat of the lot is listed below (I just left aside all the variables that are defined in advance)

  CD /d %Cert_Path%\loginsight

  % OpenSSL_BIN % genrsa 2048 > rui.key

  % OpenSSL_BIN % req-out rui.csr - rui.key - new config key - loginsight.cfg

  Certreq-submit - q - f config "% nom_autorite_de_certification %" attrib-"CertificateTemplate: % Cert_Template % ' rui.csr rui.crt

  % OpenSSL_BIN % pkcs12-export - in rui.crt - inkey rui.key - certfile % CA_Cert_Chain % - name rui-out rui.pem

  copy/b rui.crt + % CA_Cert_Chain % chain.pem

  You must have a file that contains the key and the string, otherwise you will get an error. This command:

  % OpenSSL_BIN % pkcs12-export - in rui.crt - inkey rui.key - certfile % CA_Cert_Chain % - name rui-out rui.pem

  Creates a file, but rui.pem is incorrect. It is actually creating a rui.pfx (see at the bottom of this link: The Most Common orders OpenSSL). I think the problem is that you have the - flag of knots at the end of the command (see what is the purpose - nodes in the openssl argument? - Stack Overflow). A visual way to check is to open the .pem and ensure one contains a section – BEGIN RSA PRIVATE KEY. The chain.pem does not work and the rui.pem is binary, because these two will fail. I hope this helps!

• How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Active Sync iPad ssl Client certificate

  How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Hi Ewoki,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the TechNet Exchange forum. Please post your question in the Forums TechNet in Exchange Server.

• Replacement of Certificate SSL - invalid certificate format

  Has anyone had luck replacing the default SSL certificate?  I have a cert .pem format with the string to it and is having back and error of invalid certificate format.  I tried out the string just to see and who did not, but it gives me good to go, because I believe that we meet all the requirements of the cert.  Y at - it logs that would provide more info on the issue?

  Have you checked: replace the newspaper Insight SSL certificate with a CA signed cert

• Receive the error message "the server that you are connected using a security certificate that could not be verified that the certificate CN name does not match the passed value.

  Prob Winmail.

  Receive the error message "the server that you are connected using a security certificate that could not be verified that the certificate CN name does not match the passed value. Do you want to continue? ». This started happening after that my laptop has been reformatted. I have synced with Gmail winmail and followed the instructions to do this correctly. By pressing the tab 'Yes' allows me to use winmail, but it's a little embarrassing.

  Using a digital signature?  Check the settings under Tools | Options | Security and also tools | Accounts | Mail | Properties | Security.

  Also, see here (http://mail.google.com/support/bin/answer.py?hl=en&answer=86382) and make sure that your settings are correct.

  Steve

• On the vMware vcenter inventory services

  Please someone explain to me clearly the basic function of the vMware vcenter inventory services.

  See you in you inventory vcenter. A lot of guests. And every time you log into the Web client (Inventory service works only with the web client) and try to see an entity it what will do the vcenter? It will enter into its database and rethink the entry for you?

  vCenter inventory service acts as a cache. It stores all recent or entities of the stock near the most used web client. When you access a parameter in vcenter now. vcenter service won't go to its database for the entity. It will be given by the inventory service. This way the load VPXD is reduced to a minimum.

  Doubts over?

• Replace the message "No Items Found" with Javascript

  On this page http://www.sedonamagoretreat.org/test in the second box "Program Dates" in the sidebar on the right, I'm trying to set up a script that I found to replace the "No items found" message with a custom html file.

  The javascript is here: http://www.sedonamagoretreat.org/js/no-items-found.js and here is the html file that is used to replace the message: http://www.sedonamagoretreat.org/prog-dates-alternate-content.

  I'm sure this is an easy fix and I'm just on something... suggestions to get this script working are welcome - thanks!

  Linda

  Well Yes, it's easy to fix.  You are the javascript file requires jQuery is working properly and in the HEAD of your page or the page template you load the '/js/no-items-found.js' before calling jQuery.  Just move this SCRIPT reference in your page or your page template to the bottom of line to make AFTER the dismissal of javascript jQuery.

  Once correct you this error, it seems that the script is a not can prepare to deal with multiple instances of your web applications list.

• An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  The error was: "an existing connection was to be closed by the remote host".
  (0 x 00002746 WSAECONNRESET error code)

  The query was for the SRV record for _ldap._tcp.dc._msdcs. HAMI. LOCAL

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Forums TechNet Windows 7 Technet.

  Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this helps

• Can we replace the primary codec CTS 3000 with CTS 1000 codec

  Hi all

  Please correct me if I'm wrong.

  Physically CTS 1000 codec and CTS 3000 Primay Codec is the same air, I would like to know what is the difference between the two codecs.

  Suppose if I replace the main codec CTS 3000 with codec CTS 1000 it'll work?

  The difference is only between the firmware... ??

  If I try to download the firmware CTS 3000 in CTS 1000 codec does?

  Also add codec CTS 1000 in CUCM as Codec CTS 3000?

  Kind regards

  Nikhil Jayan

  Nikhil,

  Are the only thing you need to know about 2 codecs GEN 1 or GEN 2. On the GEN 1 all the microphones connect to the primary codec. On the Gen 2 microphones connect through the audion expansion area. You can see the difference on the codecs on the Gen 2, you can see 1 connection for the Center microphone and a connector square for the cable to the AEB.

  Other codecs are exactly the same. Endpoint gets its configuration file in Communications Manager. So once go you MAC address and restart the endpoint it will go the new configuration file. If you use a CTS Manager, you will need to go into the Application user in the CUCM and move the MAC address of available for controlled devices. You will then need to make a discovery of the room in the CTS - Man.

  The firware for both codecs are the same.

  I hope this helps out.

  JD King

• replace the B Apps Tier instance with instance and A level apps

  Hello
  I have:
  
  Instance A
  Apps Version: R12 (12.0.6)
  IP:10.1.1.173
  Host name: oratest
  Installation: Unique and single-user node
  
  Instance B
  Apps Version: R12 (12.0.6)
  IP 10.1.1.173
  Host name: oraapps
  Installation: Monkey and single user node
  
  
  I want to replace the Apps Tier B instance with instance and A level apps.
  
  Is this possible?
  Please suggest.
  
  
  Concerning
  ANUP

  ANUP,

  I want to replace the Apps Tier B instance with instance and A level apps.

  As mentioned above, helios so the patches on both instances group level is not the same, then you cannot replace/clone the layer application only, and you will need to make a full clone of database/application as hungry_dba mentioned above.

  Kind regards
  Hussein

• can not install the latest version of itunes, get the error msg: "the component you are trying to use is on a network unavailable resource."

  Can not install the latest version of iTunes.  Everytime I try I get this error msg: "the component you are trying to use is on a network resource that is unavailable."

  Then I click OK and get this msg: could not find the path C:\users\my name\appdata\local\apple\apple software update\itunes6464.msi.

  I need to sync my new iPad pro and because used to synchronize requires the latest update, I have my laptop but I never have syncd my ipad with this computer and if I try to backup if I agree to erase everything on my device and sync with the laptop.  Of course, I don't want to do what I want to see everything on the NEW ipad from the old version.

  I went through the troubleshooting and found a solution, but when I had finished making all this trouble report said, there was a pesky itunes shortcut file on the left and I can not delete this shortcut, regardless of how many times I try.  If I can't remove it, the Installation will be terminated.  How can I delete this file?

  For general advice, see troubleshooting problems with iTunes for Windows updates. Start by Missing MSI errors .

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Error message: the software can be installed by using the command "run under...". ».

  I have amtrying to load the HP Photosmart D71000 series. Keep is error message: the software can be installed by using the command "run under...". ». Advice suggests logon as a user with administrator privileges. This was done and same message came.  Why?

  Try right click on the setup.exe > run as admin.

  If this does not work, try the Vista Hardware and drivers Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  See you soon.

  Mick Murphy - Microsoft partner

• I use xport 360 and I can't put my save game back on the program profile it shows a circle with a cross please help me

  I use xport 360 and I can't put my save game back on the program profile it shows a circle with a cross please help me

  Hello

  If you try to recover the gamer tag, then I suggest you follow the steps from the link below: http://support.xbox.com/en-us/pages/xbox-live/how-to/xbox-live-account-management/gamer-profile.aspx

  If this does not work then I recommend you to ask your question here: http://forums.xbox.com/xbox_forums/xbox_support/default.aspx

  Hope this information is useful.

• Hello, I have version Adobe Acrobat 11. I have complete documents and send them to customers. However, when customers open the documents on their side, they are empty. The filled information are missing. Can you please help me with this problem?

  Hello, I have version Adobe Acrobat 11. I have complete documents and send them to customers. However, when customers open the documents on their side, they are empty. The filled information are missing. Can you please help me with this problem?

  Why are publish you again? You must first answer the question I ask in your original thread.

• My account through the Art Institute of Pittsburgh under the name of Clairelicious713 is not yet activated, please help

  My account through the Art Institute of Pittsburgh under the name of Clairelicious713 is not yet activated, please help

  Clarissa

  IF the account is provided through the school, you may be able to work with the school to get the job of the ot.  In addition, you must contact Support Adobe directly.

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )