Error RUNDLL c:\windows\system32\nvmctray.dll the specified module could not be found. .

Similar Questions

• C:\windows\system32\nvcpl.dll the specified module could not be found at the beginning upward

  Original title: starts: error

  At the start of the get dialog box a big X 32\NvCpl.dLL C:\WINDOWS\System loading error RUNDLL

  The specified module could not be found.

  What this mean and how can it be fixed

  Yahneev

  Hello

  The system was recently infected by malware?

  C:\windows\system32\nvcpl.dll is NVidea graphics driver

  Restart and start typing the F8 key

  Select Mode safe mode with networking

  Download the following tool and run a scan complete to rule out malware

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Open the Device Manager and uninstall the NVidea graphics driver

  Reboot and Windows will reload the driver

• I have this RunDLL error. There was a problem starting O:\Windows\system32\sshnas.dll the specified module could not be found.

  I don't see any change, but it's annoying.

  This file is a Trojan horse. The Trojan horse is set to run at startup but the file is missing now and that's why you get the error. You have removed the malware, or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup.

  Because you had a piece of malware, the chances are too high you had others. It would be a good idea to scan with your antivirus with updated definitions and a good software like MalwareBytes antimalware program ' Antimalware (MBAM) from http://www.malwarebytes.org . The program is free. (There is a paid version, but you don't need to buy it to remove the malware).

  Once you are sure that your computer is now clean, rest boot entry you can delete:

  Start Orb > Search box > type: msconfig and when it appears in the results area above, right-click and choose 'run as administrator '.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue. Then see what is on the Startup tab. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Usually in Vista/Win7 it will be blocked by Windows Defender and you will need to enable it so you can then check the box that says in effect, "don't mind to this subject again".

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx MS - MVP - Elephant Boy computers - Don ' t Panic!

• I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."

  I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."
  I have Windows XP Professional, I installed Windows 7 and windows 8 and windows defender and avast antivirus scan and complete.  I did a full cleaning.

  Thank you

  I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."
  I have Windows XP Professional, I installed Windows 7 and windows 8 and windows defender and avast antivirus scan and complete.  I did a full cleaning.

  Thank you

  Hello

  you are fully updated? This means that the module cannot be found, what you want to do when you get this error? error codes >?

  check the reports on the problems and solutions

  You can do a support ticket, follow the link

  http://support.Microsoft.com/common/international.aspx?RDPATH=DM;en-us; Select & Target = support

  Microsoft product support has some tools that will be useful and can help to find a solution

  have a great day with OneCare Scan + 50 tips Windows 7even infected with the center of privacy? DELETE this Blog search & response threat Sysinternals Live Tools + TRANSLATOR+ Photosynth + Microsoft Security + Microsoft SUPPORT + Of Live Labs PIVOT + Microsoft Live Labs + Office 2010 beta + get Windows LIVE!

• I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  Hello

  I googled this file pofusido.dll and it could be caused by a virus.

  I would suggest that you disable the restore mode as viruses use it to reinstall set apart them.

  Download and install the free http://www.malwarebytes.org/

  Restart the computer and keep pressing F8 to get into safe mode with network connection.

  Once you have updated Malwarebytes run and see if it can remove the virus.

  So delete all cookies in your internet Explorer.

  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• as my computer starts up I get a message on the screen, error loading C:\Windows\system 32\NvMcTray.dll & the specified module could not be found

  This happened a few months & I can't get rid of it.

  Hello

  Read the answers in the links.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/RUNDLL-error-message-nvmctraydll-the-specified/3633427e-5476-41f8-A414-c2808852b2f3?msgId=684235f7-D922-4CD5-BF94-496f12cb30b0

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/cwindowssystem-32nvmctraydll-error/1c3babd6-a091-4408-bd9a-00cb26c1eeec?msgId=40c06885-3D2D-4913-B734-f3bf810f54a1

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/error-in-cwindowssystem32nvmctraydll-missing-entry/50ab1bad-F05E-E011-8dfc-68b599b31bf5?msgId=4a3ed103-4A64-E011-8dfc-68b599b31bf5

  See you soon.

• "iphbrbtf.dll the specified module could not be found" error starting

  When you open my computer laptop OS xp, got this message at the opening of service pack 3, I got this error RUNDLL XP loading C:\WINDOWS\system32\iphbrbtf.dll the specified module could not be found.  How can I remove this annoying message?

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.

  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.

  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update, and make at least an analysis full (not at the same time) with these free malware detection programs:
  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  These comprehensive analyses can take some time, but you really need to run.  SAS will probably be just a bunch of Internet tracking cookies, but you can remove them.  Once you have done at least a full analysis, you can do quick scans in the future to save time and save the analyses complete for when you have more time or are really suspicious of an infection of the system.

  They can be uninstalled later if you wish.

  In 1985, there were 11 known computer viruses.  Today, there is more to 1, 122, 311 and the new threats are detected every day.  Always update your virus definitions before running a scan.

  Restart your computer and solve the outstanding issues.

• As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." How should I do?

  Original title: Rundll error help

  As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." -What it means and how to fix it?

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• MSG for error in Windows 7: "unable to load DLL 'Gpib - 32.dll': the specified module could not be found."

  Hi people, I have a project in VB. NET (VS2010 specifically), which has been updated from an old VB6 project. The old project

  use Niglobal.bas and Vbib - 32.bas to communicate with the GPIB plugged into one of our litters.
  Now in the 64-bit Win7 with the Niglobal.bas and the Vbib - 32.bas converted to Niglobal.vb and Vbib - 32.vb,.

  I get an error when debugging to

  Public void RegisterGPIBGlobals()

  in the Vbib - 32.vb, the error msg says:

  Unable to load DLL 'Gpib - 32.dll': the specified module could not be found. (Exception from HRESULT: 0x8007007E)

  It seems like this Gpib - 32.dll, that I found under SysWOW64 on my Win7 is not designed for a 64-bit application and when I copy this dll file on

  C:\Windows\System32, the msg of error becomes:

  An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)

  So I think my question is double: 1. the drafting of my own app in VB. NET can I still use Gpib - 32.dll (including the Niglobal.vb and Vbib - 32.vb)?

  2 Will the application I am writing with .NET work in x 64 Windows 7?

  The Almighty gurus and Mods please help. Thank you!

  Hi Joel, thanks for the answer! I have the 3.0.2 driver.

  I was looking around for a while after I posted here and further in the use of NI4882 manual, page 4-4, I found this:

  «To bring an application in an environment 64-bit requires the application to migrate the NI4882 API and be recompiled.»

  So I'm ditching the gpib - 32.dll (vbib - 32 & niglobal) and currently I am using NI4882.dll and restructuring of my project.

• Error at startup: error loading c: | windows | izameweb.dll the specified module could not be found

  RUNDLL error

  The following message started appearing when starting my pc, please can help you, I tried the fix of this site without success.

  Error loading c: | windows | izameweb.dll the specified module could not be found

  Kind regards

  Anne-Marie

  Its probably part of some malicious software. Download ccleaner, run it and then go to tools / startup. Remove the entry. Then scan your system with a virus scanner

• How to erase or correct an error loading RUNDLL that keeps Poppin ' up C:\ProgramFiles\ParetoLogic UUS2\USS.dll the specified module could not be found... error?

  How to erase or correct an error loading RUNDLL that keeps Poppin ' up C:\ProgramFiles\ParetoLogic UUS2\USS.dll the specified module could not be found... error?

  Hello

  Here is some information on this problem.

  The information contained in the link suggest you delete a scheduled entry, if it exists:

  http://www.utilitysoftwarereviews.com/how-to-remove-ParetoLogic-uusdll-error-message/

  You can also use this program (FREE Autoruns) to find:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• Error loading C:\Windows\sbdbrbs.dll - the specified module could not be found.

  Original title: sbdbrbs

  When my computer starts up it gives the following error message: error loading C:\Windows\sbdbrbs.dll - the specified module could not be found.

  Can anyone offer any assistance?  Could not find this particular dll through search engines file.

  Thank you

  Looking for errors like this by doing a search on Google for the name of the file.  Usually, they turn up without success.

  When a search in no hits or suspicious hits result, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.

  First of all, download, install, update and run full scans with two of these free analytical tools:

  MalwareBytes AntiMalware
  SUPERAntiSpyware

  Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

  If the scans does not solve the problem (and they can't, because the actual malware file has already been processed), then download and run Autoruns.  Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."

  Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box.  The latter prevents the line running, but you can reactivate it later by removing the check mark.

• Start Windows XP problem, error: C:Windows\ecsdlp.dll the specified module could not be found.

  original title:. Error loading windows

  Under XP. Error loading of windows C:Windows\ecsdlp.dll the specified module could not be found. Ditto for C:\Windows\udehukoziye.dll. Ideas?

  Under XP. Error loading of windows C:Windows\ecsdlp.dll the specified module could not be found. Ditto for C:\Windows\udehukoziye.dll. Ideas?

  Your computer was (and still may be) infected with the malware.  Error messages such as those that you have the result when your anti-malware application deletes the active part of the malicious program but fails to remove the entry from the Windows registry used to start the malicious software.

  First of all, download, install, update and scan with these two free utilities:
  MalwareBytes Anti-Malware
  SUPERAntiSpyware

  If after the scans have completed and you have removed a malware that has been found, you get the error messages on a restart, download, install and run Autoruns.  Once the scan is complete Autoruns (bottom left), click the 'Connection' tab and find the names of two files in your error messages (ecsdlp.dll and udehukoziye.dll).  If found, uncheck the box at the left end of the line (you can delete the entry, but this action is not reversible).  If you can't find the name of the file in the connection tab, click the "all" tab, use file > search to find them.

  Once the entries with incorrect file names have been deleted or not, you will get errors at startup upward.

• Error loading C:WINDOWS\opetafuzacan.dll the specified module could not be found

  When I boot, the following message is displayed: error loading C:WINDOWS\opetafuzacan.dll the specified module could not be found

  Anyone know what it is? I have not noticed a difference in the way the computer runs

  Looks like it is or was part of the malware. Download ccleaner install then run it. Go to tools / startup highlighted / delete

• Error loading C:\WINDOWS\ubadamujumuqobo.dll the specified module could not be found

  loading C:\WINDOWS\ubadamujumuqobo.dll the specified module could not be found

  Oh yes, I recommend you either download autoruns and look for the entry of the virus in the long list of items or you run regedit and press contrl + f to search for the string ubadamujumuqobo and delete it. But it can be more risky for you, because you might remove something important. If you find in autoruns, right-click on it and click on see the entry in regedit. Then remove the entry from there. If you can not find in autoruns, make sure you have the skin of microsoft entries in the filter.

  Autoruns

  Regedit:

  Click Start > run > regedit
  OR
  Press the Windows key + r > regedit

  -Alex