Windows 10 of bootcamp will not show Wi - Fi list in options

Similar Questions

• FAQ (26): I installed a different version/version of Windows and now SDM will not show me updates.

  I installed a different version/version of Windows and now the SDM does not work in "Update" mode

  This can occur when some system that HP did not specifically tests with the model is installed and often happens with models and Windows Ultimate edition (or even 64-bit editions on some older models) before Windows 8 Ultimate.
  
  Because SDM detects the new operating system, but it cannot match in the SDM catalog, he (SDM) will disable mode "Update."  However, please note that you can still use SDM mode 'All products' to download your SoftPaqs by doing as follows (the Probook 4730 s is used as an example):

  1. Press the "view all products" in the SDM toolbar
  2. If a dialog box warning that "no operating system have been selected, then skip to step.
  3. Press OK to close the dialog box.
  4. Check the «Microsoft Windows 7 Professional 64 Edition»
  5. Click on the tab "language filter".
  6. 'English - International' is checked.
  7. Press the OK button.
  8. Now, expand the tree on the left side of the SDM application by selecting the following:
  9. HP Probook Notebook PC Series 4700
  10. HP Probook 4730 s Notebook PC
  11. Microsoft Windows 7 Professional Edition 64
  12. Check the box 'international - English.
  13. Press the button "find available SoftPaqs.
  14. After "things calm down", click on the button "See the last SoftPaqs" at the top right of the application of SDM.

  The latest list of the Softpaqs for your model should now be displayed. We recommend that you download all listed SoftPaqs. This whole new way SoftPaqs are released for this model will appear on the top list titled "Available SoftPaqs" display.

  To install a SoftPaq after downloading, do the SoftPaq to the ListView "Downloaded SoftPaqs" right click and select "install SoftPaq.

  Important note: most SoftPaqs listed using the method above should apply to your model, but a small number of SoftPaqs might not be applicable to your model due to the offers of different material for your model. This means that not all listed SoftPaqs will install on your model and that is normal.

• Windows Media Player 11 will not show "Protected" column

  I'm checking the DRM protection / my music but I can't seem to understand in what display I can get the "Protected" column to display. I thought it was in the songs (on the left under library) in the Details view, but when I click with the right button on the menu and click "Choose columns" to verify Protection"is greyed out. I went through all the options under library with all kinds of different points of view but the only time I see 'Protection' option, it is grayed out. Any help would be appreciated.

  Well, that's weird. Before you try to add a new user account (which I didn't know I've even knew how) I watched Media Player again for you ensure that I had written my question correctly. When I tried to click on "Choose columns" I accidentally hit 'Restore the columns' that must have something to reset 'Protection' is now a clickable thing again.

  Thank you for taking the time to answer; I appreciate it!

• Is there any photo reliable consultation programs, Photo Viewer Windows will not show photos

  IS THERE A FREE UPDATE OF THE WINDOWS PHOTO VIEWER, IT DOES NOT SHOW MY DIGITAL PHOTOS. ARE THERE OTHER PROGRAMS TO LOOK AT A PICTURE WHICH WILL RECOGNIZE ALL FORMATS OF PICTURES? ANY HELP WOULD BE APPRECIATED. IT IS A PERSISTENT PROBLEM. Thank you.

  Did you installed Windows Live Photo Gallery?

  It supports several formats, including RAW files.

  Windows Photo Gallery has native metadata management and tagging support and the Windows Imaging Component being extensible, it can organize and see any image format for which a third party WIC codec is installed. By default, it can view the images JPEG, BMP, PNG, TIFF and HD Photo , so that video

  http://Windows.Microsoft.com/en-us/Windows-Live/Photo-Gallery-get-started

• Bootcamp does not show me the tasks

  Hello, I do not know why bootcamp does not show me tasks, I need to create a windows installation disc and all I can do is choose the iso and the space in the partition.

  can someone help me?

  2015 macs have more spots.

  Please see https://help.apple.com/bootcamp/assistant/6.0/#/bcmp173b3bf2 for help.

• Windows XP CD rom will not play my game.

  Whenever I put my Cd in my Cd rom Sims pets turns and the small icon flashes on the mouse as if its going to play.  However an error message saying Windows player is not ready, then it has the little message:

  exception processing message c00000a3 parameters 75bb6f9c 75b657c 4 75bb6f9c

  and then I have 3 options to cancel, try again or continue.  So I click and it will continue to run as if its going to play. but nothing happens!

  I'll even try to manually open it on the page my computers and it will not show that it is inside the cd rom.

  In the past this has happened and it wouldshow this message and when I click on continue, it would still be autoload and play.

  Sometimes he would say insert Cd whereas it would already be there, so we had a game where it would open again and I would like to close it and repeat again and again until it would be reconigize spit it and play. A great true brake!

  I hope someone can help me, if so please could you me good directions step by step!

  by the way, I have a windows XP and a HP computer

  Pinkchick,
  So did you continue to step 8.  If you do not have an upperfilter listed then you just need to go and seek the UpperFilter.  If you do not see also entry UpperFilter then you can close out of regedit.

  If there was no lower filter, then I would like to know a few more details.  This only happens with this game or the CD drive has problems with other CDs as well?  You can test this on another PC game disc?

  Let us know these things, so that we can find a resolution.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I try to run windows update and it will not update gives error code 80070005

  I try to run windows update and it will not update gives error code 80070005, I also ran fix and it tells me that it is fixed but it is not getting the same error code when I try to update after running it help please?

  Hello

   
   
  
  1. which Microsoft Fixit did you?

  2 have you installed new hardware or software before the show?

  3. who is the antivirus installed on the computer program?

  4 update you are trying to install?

  5. are you logged on as administrator on the computer?

  
  If this isn't the case, I suggest you to log on as an administrator and check for the issue.
   
  Method 1:
  One of the other reason for the 80070005 error is caused by software running on your computer security.
  Temporarily disable the security software on the computer and see if that makes a difference.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2:
  I suggest you perform the steps described in the article:
  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
  http://support.Microsoft.com/kb/968003
  This problem may occur if access is denied when accessing or copying files during the process of Windows Update or Microsoft Update. Access may be denied if you have logged on to the computer as a standard user and this account does not have permission to install updates. I suggest you to follow the steps and check if it helps.
  
  Method 3:
  Perform a clean boot, and then check if it helps.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  See also:
   
   
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
   
   
  I hope this helps.

• Windows Media Player 11 will not play video

  Windows Media Player 11 will not play DVD-video or video files from a SD card.  I tried several update codec options, but none were successful, including the option offered by Microsoft (http://www.microsoft.com/windows/windowsmedia/download/AllDownloads.aspx?displang=en).  Windows tells me that a more recent update has been installed and refuses to go forward.

  Hi RonMcCulloch,

  ·         You receive an error message or error code?

  ·         What is the type of file you are trying to play?

  ·         The DVD I get recognized by the computer?

  ·         Did you do changes on the computer before the show?

  In the meantime, you can try to reduce hardware acceleration, and see if it resolves the problem. (Only if your video card supports hardware acceleration)

  a. open the screen resolution by clicking on the Start button, click Control Panel, and then under appearance and personalization, click adjust screen resolution.

  b. click on settings Advanced , the Troubleshooting tab and then click change settings.

  c. move the hardware acceleration slider toward none to reduce or turn off video hardware acceleration.

  d. click OKand then click restart now.

  Let us know if it helps.

• AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• When a small sign of movie is available as an attachment 'he' will not show picture but sound turns on and that 'it' will not leave

  problem title: original accessory

  When a small sign of movie is available as an attachment 'he' will not show picture but sound turns on and that 'it' will not leave.  Help!

  When a small sign of movie is available as an attachment 'he' will not show picture but sound turns on and that 'it' will not leave.  Help!

  What do you say "he's not leaving"? He kept playing with his only non-stop?
  If it is 'yes' or 'no', you can always he kill 'soft' media player.

  Take a look at your video accessory. What are the last 3 numbers, such as avi, mpeg, mov etc. ?
  It is possible that your video accessory is in a format unsupported by Windows Media Player.
  Save it in a folder of your choice.
  Googe for a FREE video converter (if you do not have one) and convert the video file toWMV.
  Now you should be able to read in the drive media with images and sounds.

  t-4-2

• Windows Media Center visualizations will not work

  My Windows Media Center visualizations will not work for some reason any. its been like that for a while.
  When I listen to music and want to see my office shows that the program is still underway
  I thought it has something to do with the visualizations I instaled on Windows Media player
  (like ribbons and Upcube)
  I tried to remove them, they either come back or he will constantly ask me to go to it

  my system is portable

  • Windows Vista Edition home premium
    • Intel core 2 DUO

    32-bit operating system
    2.00 GB

  I missed a CD command before the directory (since corrected) so orders would be as follows:

  CD C:\program files\windows media player\visualizations\
  
  DIR

  You'll see the DLLs listed here, they are visualizations that have been installed (if the author decided to use directory default visualizations) NOTE: there may also be cases where the author badly spelled directory visualizations and used something like "visualizations".

  regsvr32.exe - u nom_fichier.dll  (use only the indicated file name that you want to remove)

  repeat if necessary.

• I want to use Windows 7, the computer will not accept my 25 digit product code please help

  I want to use Windows 7, the computer will not accept my 25 digit product code - please help.
   

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• Create a model that can be replicated, but will not show changes in the original model, which occurs in any comps duplicated from it?

  I imported a doc I - 4 layers. Then I dragged these 4 layers in a new comp - comp1. I would like to reproduce this model so that I can try different things using these same 4 layers. But when I duplicate the comp I did - comp 2 - any change I make appear in comp1. How can I create a model that can be duplicated - but will not show changes in the original model, which occurs in any comps duplicated from it? Thank you very much!

  (CS5.5)

  It is a common misunderstanding when you start working in Ae. It takes time to get used to, and even veterans are still this error from time to time. Here's the thing, you have to get in your head: your project Panel is where your source material is, and the timeline is the place where there is a representation of this source. This means that if you duplicate an item in your timeline (particularly relevant for the precomps) it will duplicate a copy, not the source. so, if change you it - it will change all instances of this copy. If you want to duplicate a precomp and create another source, you will need to do it in a 4 step operation:

  1. duplicate your precomp in the timeline (you got that day)
  2. Select the source of this copy in the project Panel (currently the same precomp)-right click on the-> precomp 'reveal the source layer project.
  3. duplicate the precomp selected in the project Panel
  4. replace the copy in your panel mounting with the duplicate of the Source Panel (shortcut - Ctrl + alt + / when both are selected, or drag it to double with pressing Alt)

  what you are really duplicate the precomp twice - once in the project window and once in the timeline, and then one link to the other.

• How can I change the workspace to a color for my computer screen will not show

  How can I change the workspace to a color for my computer screen will not show	Submit question

  	Submit question

  Photoshop CS6 now opens by default with the "Application Framework" lighted. You can go window > frame application in the main menu and uncheck this

  We have a lot of useful information in the FAQ section. The answer to this question was also there. See the link:

  FAQ: UI - how do I change the color theme, text size, or cut the course of enforcement?

  Feel free to browse other FAQS, there might be a few other things of interest.

  Guinot

• iPad Mini will not show iOS10 update?

  Hi all.

  My iPad mini 1st generation will not show the update option to iOS10 via iTunes or wireless.

  Any suggestions how?

  Your iPad CPU is not powerful enough to run iOS 10.

  (144743)