Similar Questions

• WALKMAN NWZ-S545 gives error cannot start (error 10) device in the Device Manager (and not driver for this device found)

  Under Xp (sp3), Device Manager gives me an error for a Walkman NWZ-S545.  XP sees it as a MTP device, but it does not start.  The Device Manager will give me 2 error messages: device will not start (code 10) not and no driver not found for this device.  The walkman works very well with my other machines on the LAN XP but naturally one that I run my media (a all my MP3 etc.) is the one that has the error.  All of my PC are almost identical (with the exception of the server, duh).  I changed USB ports, uninstalled/reinstalled drivers, called SONY to dozens of times, nothing works.  Is a service not started that must be, a driver damaged, what?  Thanks for your help in advance.

  Hello

  I suggest you run the fix that is present in the link below then connect the Walkman on the system and see if the problem is resolved.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  I suggest to uninstall the drivers and firmware for the walkman of the system then download it from the Sony site and install it on the system and check if the problem is resolved.

  http://eSupport.Sony.com/us/Perl/SWU-list.pl?MDL=NWZS545&SelectOS=7#div_pos_94

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• the size of your hard drive is not supported for this process. Please use a hard drive at least GB in size

  Whenever I try to use my restore disks of backup with the image of the system when I bought my Dell 8300 desktop computer I get this error message (your hard drive is not taken in charge for this process. Please use a hard drive at least GB in size.

  My computer crashed went to blue screen that wouldn't everything now I hear 4 beeps, finally I managed to do start on. I already ran the long diagnoses everything was fine.

  Here's my problem. I changed the Sata AHCI RAID mode I could create a partition then my Windows 7 downloaded CD Windows 7... my CD of drivers dell drivers, but now I'm unable to use my system restore CD to restore like I always do when I have a problem. When I changed the sata mode to AHIC on load it says (lack of operating system)

  I'm not very technical, so if someone can show me step by step on what I should do or give me a call [Admin Note: personal information removed] I would appreciate it a lot. I've added a few pictures as well

  

  

  Large. I am pleased that my DBAN guide has helped you.

  Now that you are on the factory settings, I advise Dell DataSafe Local Backup uninstall and upgrade to the latest version of Dell backup and restoration which has many bugs/improvements, including the ability to restore to another hard drive which is useful in case the hard disk fails in the future or you decide to upgrade later to an SSD. The XPS 8300 running perfectly with a SSD, I have mine put in place with one. Then you can create a Rescue Disk (external hard drive Bootable) or Backup factory (Bootable USB Flash Drive) that will be promoted the recovery compared to the facts media with Dell DataSafe Local Backup. See here for more details:

  http://dellwindowsreinstallationguide.com/Dell-backup-and-recovery/

  Note This is not a UEFI BIOS (he missed just out on the passage to the UEFI) but may start from an external hard drive.

• Error VDM with View Composer "View Composer is not available for this EGG."

  Even after installing View dial on my VC and configure the database according to the Administrator's Guide, I get this message when I click on the button "check to see composer compatibility.  I have the 'view composer' service on the Victoria Cross started and running.  I can't find anything on the web that makes reference to this message.  Thoughts anyone?  Thank you.

  

  Shane,

  Do you use the Virtual Infrastructure 3.5 U3? This version is required by the composer of the view - see the Administrator's guide, at the bottom of page 15.

• Error of invoices of purchases: subledger accounting options configuration is not complete for this book.

  I created a new book and made all the required settings for purchasing options and pay

  I created a purchase in Purchasing order and created an invoice in paybles

  but when I am trying to VALIDATE the invoice it is throwing the following error message

  "subledger accounting options installation is not complete for this book."

  I also created a subsidiary ledger and I also run the program "Update of the subledger accounting program" of responsibility for accounts payable

  Can someone suggest me a possible solution

  Thanks in advance

  When you set the ledger, it seems that you forgot to give the value for the field "method to account for the subledger.

  Specify 'Accumulation Standard' as the value for this field currently. You can change it later according to your needs.

  Kind regards

  Srini

• Password reset disk error - "year error occurred while the wizard attempted to set the password for this user account.

  Hello!

  -A bit of background: the desktop PC that I use is Windows Vista Ultimate Edition, with active user accounts total five. I have my own account, and I can access the computer through (or through account from my brother, because I know its password).--

  I had this problem recently came where the administrator password (that I know for a long time and never changed) no longer works. So, after some research, I created a reset password on a USB disk, that I found in my house. I managed to create the disc, but when I tried to put the new password, I got the message error "an error occurred while the wizard attempted to set the password for this user account', which I must say is not very clear. I found a few methods of force - reset the password for the account of the admin, as using a sort of Windows Vista DVD or go to Safe Mode to find the hidden administrator account... but I have no idea what this DVD is or where to find, and in Safe Mode, there is no account user administrator to be seen. I believe that my machine is corrupted, but I don't want to buy a new. I want just to reset a password...

  Any help is appreciated. If I was not specific enough, I can specify in comments.

  Thank you!

  Hello

  You must make a password reset disk before that there are problems with a password, not afterwards.

  ________________________________________________________________

  Read this for your problem:

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  _____________________________________________________________

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• Windows Mail error 0x800CCC92: Operation of Pop is not allowed for this user

  Split of: ' "windows mail error code: ox800CCC0E, error code 10060".

  Account: 'mail.bigpond', server: 'mail.bigpond.com', Protocol: POP3, server response: '-ERR pop operation is not allowed for this user.', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92

  It's what keeps appearing on my Windows Mail when I go in there. BigPond say they have problems with Windows Mail and try to fix it.  Any ideas please?

  Thanks LyndaBeresford

  If they have problems, then it is not that you can do about it until they solve these problems.

  You can access your e-mail via webmail: https://signon.bigpond.com/login?site=chw&goto=http%3A%2F%2Fmessaging.bigpond.com%3A80%2F%3Fref%3DNet-Head-Webmail

  Steve

• Download the file from the TFTP and get this error "this image is not valid for this platform.

  Hi guys

  You try to download a new IOS for my CISCO ASA using TFTP I get the following error

  Access tftp://189.206.211.24/asa825-33-k8.bin...!

  % Error copy tftp://189.206.211.24/asa825-33-k8.bin (this image is not valid for this platform)

  -Anyone has the same error.

  Also, I have tryied using the ASDM but I get the same error.

  Kind regards.

  Hello

  As says the Description This is not for model ASA5580.

  Click on the link connected with your account

  http://software.Cisco.com/download/type.html?mdfid=281191384&flowid=4378

  Then choose the software Adaptive Security Appliance (ASA)

  Then navigate through the drop-down list on the left

  Provisional-> 8-> 8.2.5 interim

  And you will get the visibility (click to enlarge)

  

  -Jouni

• I tried to reset my password computer laptop but the laptop telling me an error occurred while the wizard attempted to set the password for this user account how can I fix this pleas

  I tried to reset my password computer laptop but the laptop telling me an error occurred while the wizard attempted to set the password for this user account, how can I fix this means if someone knows how to fix teas pleas answer me quickly I have to work

  Logging in as an admin account, then reset the password for the account of the problem.

• When you try to import photos, I get an error that says that the preview is not available for this file.

  When you try to import photos I get an error that says: Preview is not available for this file. Then when I try to download these files, a gray box returns for each photo with the name of the file, and this error message -Preview is not available for this file but no picture. The files are JPEG files. I use Lightroom CC help?

  Some additional information. I received these photos of my granddaughter of my son with Dropbox. I checked the files under properties and found that they were listed as "some blocked properties" so I checked the box to 'unlock' and click on apply. The blocked message went away. Then, I took the original photos out of the folder of file they were in. I went back to LR and made sure those grey boxes with the Preview is not available for this file was missing. Then I went to the new files with the status of unlock in a new folder and tried to import into LR... same thing happens again! UGH

  Hi rsobieski,

  Could you please copy the images of Dropbox in a new folder on the computer/pictures folder.

  Also, then try again to import images into Lightroom and also please check if you have read and write permissions on the images.

  Kind regards

  Tanuj

• While trying to update the drive, I get error 2753.  The file 'acrosup64.dll' is not marked for installation.

  I get an error trying to update the drive that is suggested by creative cloud.  Error 2753.  The file 'acrosup64.dll' is not marked for installation.    I tried to uninstall and re - install drive, but when it's time to update again, I get the same error.  Is there a solution or get around it?

  Hi freddiebegood,

  Please see this KB for the solution https://helpx.adobe.com/acrobat/kb/error-internal-error-2753-install.html.

  Kind regards

  Nicos

• I am trying to reinstall photoshop CS5 in a new laptop, but I got an error "serial number is not valid for this product".

  I am trying to reinstall photoshop CS5 in a new laptop (pc), but I got an error "serial number is not valid for this product".

  I disabled photoshop in the old computer.

  The old laptop have photoshop installed with the DVD, but the new laptop have DVD so I downloaded cs5 CS5 download products. ¿Maybe this is a mistake?

  I downloaded from products of CS5 download the multilingual version (Spanish) instead of the version English and with it, it seems that the series is ok and I can install... I thought that the series was OK for all languages, but it seems that it is not.

• I started the OS from a backup hard drive. Now My Adobe products does not work. "licensing does not work for this product" error code 150:30. Help me please!

  I started the OS from a backup hard drive. Now My Adobe products does not work. "licensing does not work for this product" error code 150:30. Help me please!

  Reinstall the software correctly. Migration / backups do not work due to the specific requirements of the activation system.

  Mylenium

• Series Activation error "serial number is not valid for this product".

  I have Photshop CS5 Extended edition, but when I try to activate the key it comes up with the error "serial number is not valid for this product". The product has been activated twice before, but the installation does not come with the error "serial number is already in use" or something similar. Any ideas on how to solve this problem?

  Hi Dynamikzz,

  According to the error message you received "Serial number is not valid for this product", please follow the help as document below:

  Error "serial number is not valid for this product". Creative Suite

  Where you received the error message "Serial number is already in use", please follow the thread below the number of activations of Adobe CS5 applications is 2:

  Re: problem with serial number

  Kind regards

  Sheena

• Error message "Preview not available for this file.

  I use LR 4.4, but it did not work properly since I got my new camera (Canon 70 d). When you try to import, I get the error message "Preview not available for this file. I got lucky better connection of the device with a usb cable, which allow me to see the jpg images, but he wouldn't let me see the raw images (.cr2). I would solve this problem by opting for the LR5?

  I use LR 4.4 on a Windows 7 PC.

  Thanks for any help that can be provided.

  Robert

  Support for the Canon 70 d was introduced with LR version 5.2. See the link below.

  Camera Raw plugin | Supported devices