Error: Select a valid value

Similar Questions

• Script error: property not valid value operation

  (in FormCalc)

  I have a form with multiple pages.  The first two are a graph and the other 8 diagrams.  Diagrams have fields of number to the entry measures taken from an inspection process.  The graphic form I have a button to fill in the chart with information from diagrams.

  The click event of the button first retrieves the information from the diagrams and transfer them to the chart.  He is then supposed to change the font color depending on whether the readings are within limits (black for good, red for the worse).

  However, when I go in the preview PDF tab, enter test data in diagrams and click populate, I get an error that I don't know how to fix.  I was not able to find something on the Internet about it.

  Any help would be greatly appreciated.  Here's what's on the screen of the error:

  Script failed (language formcalc; context is)

  XFA [0] form [0] .topmostSubform [0]. LHChart [0]. Button1 [0])

  script =...

  Error: The property not valid value operation; Police is not a default property

  I found the solution to my problem.

  I had the code in the target fields as well as the button trying to change color of font, based on imported figures.  I deleted the code in the target areas and leave the code in the button field and everything worked right.

  Thanks again for everyone's help.

• Checkbox validation based on the selection of the values LOV

  I'm trying to validate a checkbox custom on the opportunity page, based on the selection of the values LOV.
  
  For example only when the user selects 'rating = A', the box should be able to select and save.
  
  If the user selects other that 'A' in the field assessment, the box should not save.
  
  or
  
  Is it possible to do, the READ ONLY checkbox, enable only when the side 'A' is selected.
  
  Any thoughts / help on this.
  
  Thank you, Kumar
  
  Edited by: user10833334 may 4, 2010 06:43

  There is no function to make a read-only field based on the contents of another field, it is not an option. I will list my thoughts on how you might handle this below.

  -Option 1: I recommend that you use validation to manage it. I don't know exactly to your needs, but you could write a field validation that checks to see if the flag is checked and rating <>has and sends an error message to the user, if it is not. The user would not be able to save the file until it Unchecks the box or sets the side = A.
  Advantages: User gets a message explaining the problem with the data and is forced to fix it before you save it.
  Cons: Requires interaction from the user to save and if they do not pay attention, the data may be lost if they cancelled without saving the changes.
  

  -Option 2: Another option would be to use the workflow to validate the registration. In this scenario, you can create a workflow that determines whether the field is out of adjustment, and if it is not correctly set, the workflow would update the box accordingly. In this scenario, you would use the 'Actions if Condition is False' also to inform the user that the flag cannot be controlled unless the side =. Then, you must set the Action "Update the values" update the uncontrolled field.
  Pros: Manages the work without user interaction.
  Cons: The con in this case, is that there is no workflow 'Before NEW record saved' trigger, so it is likely that the user sets the value incorrectly when creating the folder and it would stay like that until they update the record again.

  Some people might argue that there is another option that uses the functionality of dynamic page layout to make the field read-only, but this isn't a good option. You would need to convert using the Type of the opportunity in a way that would make use of the possibilities of lourdes for your users and I mention it only to you recommend to avoid his review completely.

  Good luck and let me know if you have any questions.
  Thom

• Manually created SelectManyChoice survey error when certain specific values are selected.

  Hello

  I manually set the values for the component selected choice a lot of a view object.

  The list is retrieved correctly on the UI, but when I select some specific values it gives an error - error: the value is not in the correct format. Enter a value for this type: {2}

  I put the Auto Submit - True and I have a valueChangeListener hung for this component.

  All can help me in this regard

  Here's the code,

  < af:selectManyChoice value = "#{backingBeanScope.AllocationQuickCreateBean.warehouseList} '"

  label = "#{publicuiviewcontrollerBundle.Warehouse}" id = 'smc1' "

  Binding = "#{backingBeanScope.AllocationQuickCreateBean.warehouseSelectMany} '"

  partialTriggers = "it1 soc1" autoSubmit = 'true '.

  valueChangeListener = "#{backingBeanScope.AllocationQuickCreateBean.warehouseValChanged} '"

  Disabled = "#{backingBeanScope.AllocQuickCreateAccessibilityBean.Disabled ['Warehouse']}" "

  valuePassThru = "true" >

  < f: selectItems value = "#{bindings." AllocationQCWarehouseVO1.items}"id ="si3"/ >

  < / af:selectManyChoice >

  Similar mail was returned?

  Incorrect in error message

• oracle.jbo.DMLException: Houston-26080: error selecting entity for

  JDEV - 12.1.3

  I have a main table and several tables retail filled out on the form. The appeal of the validation, I get the following exception.

  Caused by: java.lang.UnsupportedOperationException: No Data In this Entry

  at oracle.binding.DataChangeEntry.getAttributeValue(DataChangeEntry.java:122)

  at oracle.binding.DataChangeEntry.getFormattedAttributeValue (DataChangeEntry.java:137

  Added a dodml try/catch and its launch under exception.

  oracle.jbo.DMLException: Houston-26080: error selecting entity for CitNvdVulnerabilityData

  at oracle.jbo.server.OracleSQLBuilderImpl.doEntitySelectForAltKey(OracleSQLBuilderImpl.java:1144)

  ----

  Caused by: java.lang.UnsupportedOperationException: No Data In this Entry

  at oracle.binding.DataChangeEntry.getAttributeValue(DataChangeEntry.java:122)

  at oracle.binding.DataChangeEntry.getFormattedAttributeValue (DataChangeEntry.java:137

  But this exception comes only once on the loading of the form. After catching the commit exception works correctly.

  Suggestions to debug it.

  What is the value of the attribute of the iterator ChangeEventPolicy, pageDef?

  Try again with 'none '.

• When I go to open the file on my desktop, the system is said to I need to select a valid program

  Original title: RECYCLED FILES

  Hello

  My son deleted my files from a USB key that I got my recyle folder, but when I go to open the file on my desktop, the system is says I need to select a valid program (ending in exe).  I was thanks to troubleshoot which recommended I have download iLivid I have but when I paste the document my Clipboard is empty.

  Thank you

  JO

  Hello

  1. what operating system is installed on the computer?

  2. which documents are is it?

  3. for where you retrieved the documents from the trash?

  4. What is the full error message when you try to open documents?

  You need a program to open any document.

  Change the programs that Windows uses by default:

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

• I get the error code 1706 - valid no source is found for the product my Hub. Windows install cannot continue.

  I get a pop up saying error 1706 that valid no source is not found for the product my hub. Windows install cannot continue.  Also "the feature you are trying to use is on a nework resourse which is not available."

  Can someone tell me what to do and what is the problem

  Thank you

  Hi Traceyjane,

  (1) when exactly it happens?

  (2) do you use the computer as an administrator?

  (3) what is the number of brand and model of your terminal?

  If you try to install the software for your hub, make sure that you install the correct package for your computer.

  Step 1: Try to install the program as administrator right click on the installation program files and select run as administrator , click continue if you are prompted to confirm.

  Just check the items below that addresses a similar issue

  The feature you are trying to use is on an unavailable network resource
  http://support.Microsoft.com/kb/828376

  You receive an "error 1706. Valid any source not found for the product

  http://support.Microsoft.com/kb/253768

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Export contacts: function EmailEtat valid values

  Can someone tell me what are the valid values for the function "EmailEtat" field in an export of Contacts? They are numeric values, and I would like to know what each value corresponds to.

  Thanks for the help,

  Jeremy DeVoss

  Status of the e-mail message	State ID	Description of the State
  0	Without subscription	E-mail address has chosen to receive e-mails
  1	Subscribed	Ready to send e-mail to this address
  2	Has not responded to the subscription request	Opt-in email confirmation has been sent
  3	Subscription request accepted. No emails.	Opt-in emails, filled has not yet been sent
  4	Email sent	E-mail has been sent without errors
  5	Try to send again	Will retry to send after the previous error
  6	Email error	Error, email was not sent.
  7	BounceBack	BounceBack email: or another address invalid or beneficiary of the server down
  8	Delay	Delayed e-mail: continuing to try to send. Notification only.
  9	Discarded	Bath ended in Mid-send, and this e-mail may or may have not been sent.
  10	Forced full	Never sent email, but email batch was forced to fill in.
  11	Global unsubscribe	E-mail address has been unsubscribed overall.

  I hope this helps!

  Thank you

  Erik Hertzman

• Failed to create a dynamic action ALERT to build a Select list when selecting a particular value.

  Hi everyone, this should be so easy, and yet I'm stuck.

  I have a form with a P110_VESSEL_ID element.   This article is a list of selection.   It is based on the query:

  Select distinct v.vessel_name, v.vessel_id

  of ships v, frequent_fishermen ff

  where ff.dea_permit_id =: G_PERMIT_ID and

  FF:vessel_id = v.vessel_id

  UNION

  Select v.vessel_name, v.vessel_id

  of apex_collections v, vessels

  where collection_name = "SUPVES_COLLECTION" and

  a.C002 = v.vessel_id

  If the user decides from the values in the selection list query, they can opt to SELECT all THE VALUES.  This SELECT all VALUES is a TEXT of ITEM POST on P110_VESSEL_ID.

  < a id = "popVessels" href = "#" > < font color = blue > select all < /a > ships

  It all works very well.

  The problem is that when the user selects a boat name = "UNKNOWN" and it is corresponding to the value of vessel_id, I want an ALERT to appear indicating that they should check that the boat is UNKNOWN and no one's any ship.

  I created a dynamic action

  event = change

  Select type = item

  Item = P110_VESSEL_ID

  Real ACtion #1 is the ALERT.

  Currently, I have no other logic, but can't even get this working.  All thoughts.   I also tried the SELECT TYPE = jQuery Selector = select [name = "P110_VESSEL_ID"], but that does not work either (although I am not sure if the value must be P110_VESSEL_ID or static VESSEL_ID name).

  Any help is appreciated.

  PS. the page is not submitted when the ship is changed.  There are other data that should be in this region and others and many validations run when submit to submit would not be an option.

  Thanks again,

  Karen

  Is (BOAT = UNKNOWN) a single value with a single vessel_id? If Yes and for example if the vessel_id is 99, then proceed as follows:

  Add an expression "JavaScript" in your dynamic action.

  In the Condition value, enter:

  this.triggeringElement.value == "99"
  

  -Jeff

  And I agree with Nicolette, there is something wrong with some other DA who is at the origin of the DAs after that does not work.

• How default of a multiple selection for all values setting?

  I have a setting that allows the user to select multiple values.  I want the default to use all values (which means basically just ignore this parameter in the generated SQL code).  However, I can't create named on this calculation since it accepts multiple values, and the calculation supports only the first value.  Is there a way to do what I need, without selecting all the values in the list (the LOV contains hundreds and hundreds of values so it's not a viable option).  I'm not very experienced with the discoverer and don't know all the tips/solutions workaround, if you are looking for expert advice.

  Thank you

  Hello

  You must code the parameter and the condition that he accepts the word ALL.

  For example, suppose you are working with ITEM_NUMBER and you have thousands of articles. You want the user to be able to one or more key or access all THE items.

  You must create a Boolean condition like this:

  ITEM_NUMBER IN: ITEM_PARAMETER

  OR

  UPPER(:ITEM_PARAMETER) = "ALL".

  So if the user key word ALL all all or or any variation of the word to be determined as true by the condition and all items will be selected. If the user does no key ALL, and then the other half of the condition will be applied and the element must be a valid element as contained in the list of all the elements. You can even create your parameter with a default value of all THE

  Best wishes

  Michael

• Function that returns the text of the error - type of Validation

  Small question regarding creating a function that successfully compiles a validation without a text of the error control: what value the function returns to validation successful?
  
  I tried a null value, but it doesn't seem to work.
  
  Thank you.

  Hello

  How does it work?

  What return NULL validation function is passed. If it returns a character string, then the validation failed and string is displayed as the error message for validation

  BR, Jari

• What is this dialog box? "Run-time error '380': invalid property value."

  I'm trying to load a registration program and I get a dialog box that indicates that following.

  "Run-time error '380': invalid property value."

  What it means. How can I solve this problem?

  Pescatore

  Hi arthur rossi.

  See the FAQ of the Roemer software that has exactly the problem mentioned.

  Refer to the Question I get an error message that says: one of the following values: "Runtime error 380 invalid property value", "Runtime Error 52" or "Invalid file name" in the following article. "

  Roemer Software FAQ (frequently asked Questions)

• Switch to the correct encryption certificate I get the error: "Key not valid for use is specified state."

  Used
  Now cannot open encrypted files.

  When you try to pass the correct encryption certificate I get the error:
  "Key not valid for use is specified state."

  See this http://answers.microsoft.com/en-us/windows/forum/windows_7-security/keeping-passwords-secure-microsoft-policy-on/39f56ef0-5d68-41ad-9daa-6e6019c25d37

  It is as it's supposed to as an anti theft precautions. I mean that data is encrypted, if somebody stole your hard drive and the hard drive boots and the other account it can receive data.

  If you not export recovery certificates and encrypting the data, you cannot redo the decryption.

  http://Windows.Microsoft.com/en-us/Windows/back-up-EFS-certificate#1TC=Windows-7

  If it's a default domain recovery agent. admin area. If it's home, to look for recovery certified you have exported.

  But third-party tools are there if you can remember old password the is to encrypt you can recover. But they are not free... and premium software is not be recommended or guided through support free forum due to the effort of preventing unnecessary advertising.

  You can do you own research about recovering data... just try to get you using the favorite search engine... "Restore access to encrypted EFS format files" or "Advanced EFS Data Recovery.

  Many more free guides will be available... Just keep in mind this is not a method to escape... you must remember your old password at least for decryption in the case where you export a certificate.

• How can I get the color picker to select the hexadecimal value by default?

  Hello world!

  I've upgraded to Photoshop CC 2015, and now when the color picker appears, it selects only the value of C (cynan) by default, which is useless. How can I move it back so the Hex value is selected by default?

  Thanks in advance for any help!

  Ah! I have it. If I open a new file and select the CMYK mode, C is highlighted.

  If I open a new file and select RGB, I get the Hex field highlighted.

  Gene

• get the error "no sequence valid is not found for the set of patches" msg trying to launch Acrobat XI for the first time after installing - suggestions?

  get the error "no sequence valid is not found for the set of patches" msg trying to launch Acrobat XI for the first time after installing - suggestions?  Using Windows XP.

  Hi James,

  • Please uninstall Acrobat Pro XI using the cleaning tool Download Adobe Reader and Acrobat tool - Adobe Labs.
  • Restart your computer.
  • Install Acrobat Pro XI using this link download Acrobat products | Standard, Pro | DC, XI, X & serialize.

  Let me know if the problem persists.

  Kind regards

  Nicos