Error starting, IM32FAX. DIL not found

Similar Questions

• When I start or restart my computer, I get the following message on my desk: error: IM32FAX. DIL not found. What is this and how can I fix it?

  Error: IM32FAX. DIL not found

  Probably a problem with your lexmark all in one printer software/drivers.
  updated all the drivers recently?

• How to fix error IM32FAX. DIL not found on Windows vista

  When I start the Pc this summons, error IM32FAX. DIL not found vista window how to fix this problem please

  Hi Monastir,

  You can check the following link and try the suggested steps and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/fax-mode-and-error-message-im32faxdil/d25327ba-5dd3-4c9d-ADF5-ae8358d784c7

  The above link contains third party links provided by other users.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

• Download the message IM32FAX. DIL not found at startup in Windows 7

  Original title: How can I stop the Error Msg: IM32FAX. DIL not found! popping up?

  Whenever Windows 7 at startup I get popup error: error - IM32FAX. DIL not found?

  Hi jute,

  What is brand and model printer?

  I suggest to continue with the clean boot and follow the steps of

  Step 2: enable half the services to KB article http://support.microsoft.com/kb/929135 that I suggested in the previous post to find the cause of the problem.

  If the problem persists then uninstall and reinstall the latest version of the printer from the manufacturer software.

  To do:

  Step 1: Uninstall the software

  See the following site:

  Uninstall the printer software

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Step 2:

  Download the latest version of the software of the printer manufacturer, and install it.

• Cannot access the network drive or impossible to mount the network drive. Error "network path was not found.

  Original title: network path was not found

  HI, after the upgradation from windows xp sp2 to sp3 (next to the customer) I can't access the network drive or impossible to mount the network drive. ' ' It showa error "network path was not found.

  Hi gauravadavadkar,

  Thanks for posting your query in Microsoft Communities. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  ·         Work on a domain?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with networkand check if the problem persists.

  S tep 2: if the problem does not persist in safe mode with networking, perform a clean bootto see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the steps to configure Windows to use a Normal startup state section of the article to start the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  (d) when you are prompted, click restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  In Windows network connection issues

  You can read this article for more information:

  Windows wireless and wired network connection problems

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• I have error msikhd32.dll file not found on startup, how to solve this problem?

  msikhd32.dll

  There was a problem starting msikdh32.dll

  The specified could not be found.

  Hi Vipul,

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  From your problem description, I understand that you receive error msikhd32.dll file not found when starting.

  To better understand the issue, answer the following questions.

  You did changes to the computer before the show?

  You can perform the methods suggested below and check if they will help you solve the problem.

  Method 1: Perform the clean boot, check if you receive the message.

  To do this, follow the steps in this link:

  http://support.Microsoft.com/kb/929135

  NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  Method 2: perform the complete analysis of a computer by using the Microsoft Safety Scanner: http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If the problem persists, or if you want more help respond us. We are happy to help you.

• Error message 'setenv.ini' not found during installation

  I want to install the XP Pro version of the cd but I get the error message "setenv.ini" not found

  Hello

  This occurs if you install Windows from the Microsoft or Toshiba Recovery disk?
  In addition, it would be interesting to know what laptop you have.

  The disc is maybe scratchy check it!

• Fatal error. Object was not found.

  Hello

  I built aninstaller package that includes:

  3 x .exe

  LabVIEW2009 Dev Environment

  VISA Runtime Environment

  NOR-DAQmx

  When I try to run the Setup program (from the local hard disk) I get the following error, any ideas anyone?

  At soon inadvance, Alec

  .\Distribution.cpp(320): IInstallerError 10002
  Fatal error. Object was not found.
  class CPart object lookup by ProductCode cannot find the object {9A832E3A-8676-41CC-A945-9C6827D00B4C}

  I was building the installer directly on a network drive. If you create the installer on site and then copy it to a network drive, it works fine.

• Error - backup file is not found or is not the file you requested.

  Original title: restoration of Windows XP utility gives "file not found error.

  Hello
  I have Windows XP SP3 on my system. I tried to restore my backup file I had created a few months back. and I get the following error:
  "Backup file is not found or is not the file you requested.
  even though I am pointing to the correct file.

  It is possible (although I'm not sure) can I have left my backup file a different location for a more current. However, in the Restore Wizard, I'm still that it points to the current file.

  I followed the instructions of Dena in the following post:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/cannot-restore-files-from-computer-backup-on/4c3ac6eb-c8f5-4DB9-BA56-e158e057f828

  However, it does not help. When I try to catalog them by following the steps, an hourglass appears, but there is no algorithmic activity event. So if I move my mouse even slightly, the hourglass disappears and is replaced by the pointer. Then when I try to work with the backup file, I get the same error as above.

  Please help me with this restoration! There is a huge amount of data which suddenly went 'pfoosh' one morning. people say we should have backups for buffering against these events, but a pity that my backup doesn't even work! Help, please! I would really appreciate it.

  Thank you

  Hello

  ·         You receive a specific error with the error code: "the backup file is not found or is not the file you requested"?

  ·         Is the backup stored locally or on an external drive?

  You try to run chkdsk on the drive that contains the backup. Later, check to see if the problem persists.

  How to perform disk error checking in Windows XP

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer

• does not start, info system not found

  does not start, info system not found

  Hello

  1. don't you make changes on the computer until the problem started?
  2. do you have a Vista installation disc?

  Try to perform a startup repair using a Vista installation disc.

  Refer to this article for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Additional resources:
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• How can I reinstall the CoreVideo.dll. iTunes gives me error that it is not found

  How can I reinstall the CoreVideo.dll. iTunes gives me error that it is not found

  For iTunes problem, contact Apple for support with their software:

  http://www.Apple.com/support/iTunes/

  See you soon.

  Mick Murphy - Microsoft partner

• When I use the Client for NFS provided by Windows 7, I'm unable to connect. The "mount \\ip address\share Z:" command fails with the error code "the path not found network".

  Identification of customer's Windows 7 NFS UID GID information

  I am trying to connect to the Windows 7 Client NFS on a server running on a computer (VxWorks) NFS.  I am able to properly connect Client NFS software by a 3rd party on the NFS server.  However, when I use the Client for NFS provided by Windows 7, I am unable to connect.  The \\ip address\share Z: mount"command fails with the error code"the path not found network ".  I can't do a ping of the computer running the NFS server.

  The NFS Client operating system: Windows 7 Ultimate, 64-bit

  Data captured by Wireshark

  MOUNT V1 EXPORT call 3rd party client
  Identification information Flavor: AUTH_UNIX (1)
  Length: 32
  Stamp: 0xc7065970

  Machine name: PC
  UID: 1000
  GID: 1000

  MOUNT V1 EXPORT appeal of the NFS client
  Identification information Flavor: AUTH_NULL (0)
  Length: 0

  It seems that the credentials of NFS Client are not correct.  How can I change the flavor of AUTH_UNIX and the UID and GID to 1000?

  Hello VDAEMP,

  As Eddie and Sudarshan has said, the Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
  TechNet - Windows Server
   
  Thank you

• I receive the error RE5DX9.exe - Ordinal not found after installing Resident evil 5.

  Original title: error message

  Hai I use windows 8 pro recently I installed resident evil 5 on my pc, I get an error ' "RE5DX9.exe - Ordinal not found." " Here is the error in the event viewer. The 5297 ordinal not found in the dynamic link library xlive.dll. "How to solve?

  Hi Adhithyaraja,

  I suggest that take you a look at the existing thread resident evil 5 in xboxlive.dll the ordinal not found error that describes exactly the same problem and a possible solution (RyanT response - Support Engineer, October 5, 2009).

  Hope this helps and solves your problem. If Yes please mark your post as answered if this can help others in the community - thanks in advance.

  See you soon,.

  LZ.

• Jasper on oracle APEX integration error. "Error: file null.jasper not found.

  Hi all

  Recently, we have configured Oracle APEX and configured report Jasper on Glassfish 4.1. Everything went well, but when you try to run the test report we get following error.

  "Error: file null.jasper not found.

  Can anyone help with this?

  Database: Oracle 11g R2

  APEX: 4.2

  GlassFish 4.1

  Report of Jasper 1.3.0.2

  Hi Kiran,

  Thanks for your reply, we used the same link for integration.

  But now we have solved the problem. The issue was with the version of Glassfish. It seems that report jasper is not compatible with the 4.1. So, we removed 4.1 Glassfish and install Glassfish 3.1. That solved the problem for us.

• ReferenceError: Error #1069: y property not found on string and there is no default value.

  can someone tell me why I get this error?

  ReferenceError: Error #1069: y property not found on string and there is no default value.

  import flash.events.Event;

  var control = false

  var balls: Array = [one, two, three];

  var which_balloon =""

  tec.addEventListener (MouseEvent.CLICK, moveit)

  one.oney.addEventListener (Event.ENTER_FRAME, kav);

  two.twoy.addEventListener (Event.ENTER_FRAME, kav);

  three.threey.addEventListener (Event.ENTER_FRAME, kav);

  function moveit (MouseEvent) {}

  which_balloon = Balloons [Math.Round (Math.Random () * 2)]

  check = true

  }

  function kav(e:Event) {}

  {if(Checks==true)}

  which_balloon.y-= 5

  }

  If (which_balloon.y < = 100) {}

  check = false

  which_balloon.y = 350

  }

  }

  When you set which_balloon to line 3 of your code, you set it to an empty string. This will type the variable as a string. The strings cannot have a property there.

  What you probably want to do is type your which_balloon to the same variable type as some one and two and three are.