Error starting Satellite L730

Similar Questions

• Error starting Satellite Pro C855 1TC - backup does not work

  Hello

  My laptop went curput 2 days after I made a return to the top.
  Came up with an error code: oxc00000f
  I tried to use the backup disc, but ask to delete everything on a hard drive which I did not
  I have all my photos there, etc.

  I tried all other options. It is said came were windows is installed the drive is locked and unlock and try again. How to unlock?

  Also, the laptop came preinstalled. The laptop came with the disc
  How to find your product key code?

  This isn't on a sticker on the laptop. Just the House Windows 8 sticker,
  Typically, the warranty run out months before grrr.

  Can I borrow a windows disc 8 friends but I need my key not so frustrating
  IM no techno FAB just don't need advise please.

  Thank you amanda

  The laptop came with any disks, because there was a possibility to create own recovery (USB or disk) media using the pre-installed software called creator of recovery media Toshiba.

  If you n t have this disk, order you it here:
  http://backupmedia.Toshiba.EU/landing.aspx

  Now, back to your question:
  Press the power button / power off, then F12
  Now you should see some bootable devices. Last option is HARD drive recovery.
  Check if you can recover the laptop using the recovery of HARD drive option.

  With regard to the images on your disc.
  Well well, its possible to remove the HARD drive and connect external using USB-SATA cart this HARD drive on another computer. This allows you to move the photos to another computer.

  Note: this must be done before running the HARD drive recovery process.

• Cannot start the Satellite L730

  Hello

  I just bought a new laptop (satellite L730) and according to the instructions, I tried to follow the 6 steps of quick installation included in the instructions.

  After having turned it on, was asked to choose a 32 bit or 64 bit OS (I chose 64-bit as advised), I then followed the guests and answered all the instructions on the screen.
  a message _ + _ + "the computer has encountered an unexpected error... to install windows click ok to restart the computer, and then run the Setup again.

  I've been by clicking on 'OK' for the last 3 hours... and nothing has changed, I have not yet reached the stage to choose the location or the language of the keyboard etc...
  Help! :)

  Hello

  You should stop the laptop and try to reinstall the OS once more.
  Press the power button / stop, then press F8 which will allow the advanced boot menu.
  Here you must choose to fix my computer.
  Then choose HARD drive recovery and follow the instructions on the screen.

  Good luck

• Satellite L730-A191 - random stop

  I have laptop Satellite L730 - A191 (PSK0CV) that have a stop at random, in safe mode it seems ok, but when it starts in normal mode I experience the problem. When installing the OS is running it will restart all of a sudden that's why no operating system installed. I already removed the battery, restored bios defaults to 1.8 version but still problem exist.

  More can I be from material aside as chipset VGA?

  Thanks in advance

  I guess that there is a hardware problem because stop all behavior common portable system installation isn t.

  Usually the unit would be closed due to a higher internal temperature but its weird that this happens during the installation of the system. Usually, this would happen when running some applications of high performance (IE game).

  I think it might be a hardware related problem, but it's just a personal opinion.

• Satellite L730 - Bluetooth problem after upgrade to Windows 10

  Hello. I use a portable Satellite L730 and the only thing that would prevent me from upgrading to Windows 10 is the problem of Bluetooth. RFHID, RFCOMM and RFBUS will not work properly because there are no drivers. Apart from that, the computer there is no requirement of meeting problem Windows 10.

  So is it possible that a sollution to this problem will be provided anytime soon?

  Hello

  In most cases, BT does not work due to lack of BT software.
  The point is that most laptops use a module for WLan and BT.
  This combo module WLan/BT requires additional driver filter...

  According to your WLan / module BT, you will need to install the filter for the BT driver package.
  In most cases the 8 Win / filter package 8.1 Bluetooth driver should work under Win 10...

  But you have to watch for the manufacturer of modules... There are different modules like Atheros, Intel or Realtek

• Error starting compile step: make sure that a compatible version of Xilinx tools is installed in the location specified in the Setup from LabVIEW FPGA.

  Please help me for this problem "error starting compile step: make sure that a compatible version of Xilinx tools is installed in the location specified in the setup of LabVIEW FPGA.»

  Look for the error on the Web site of or or on the forums. Take a look at the following links:

  http://forums.NI.com/NI/board/message?board.ID=170&message.ID=381394&requireLogin=false

  http://forums.NI.com/NI/board/message?board.ID=170&message.ID=205754&requireLogin=false

• My computer guard turn off at startup; error starting Windows. Could someone help me please?

  Hello

  I have an Emachine, which is about three years old. We take good care of it, look at what we download and perform analyses of virus frequently a week. But for the last two or three weeks every time we start our computer, it takes a few times before he can actually get into Windows because it maintains power off. When he died, and we turn it back on, the computer goes to the screen if you want to put it in safe mode or start Windows normally, because there was an error starting. The computer offers the possibility to try and correct the error, but sometimes it is remedial and it still happens or it goes into repair mode and powers off the coast.

  We downloaded and installed the System Mechanic (the latest version), hoping that it could detect errors in the disk hard because we heard good things about the program. Unforunately after installation and with us the program running, he finds errors in all of the computer, but after you power on your computer and leave it alone for a few hours and turn on again, the problem comes back right to the top. From a logical point of view, we think it could be either an error on the HDD causing constantly turning the computer off, there might be a virus in the Startup Repair which is not find and fix the problem or there might be something wrong with the power supply by to short circuit and power off.

  Nine times out of ten once the computer is turned on, you can even say that there is a problem to be with, because everything works well. We have some important information about the computer is harmful that we can find and fix the problem.

  Thanks a lot for your time!

  Cory

  Hello

  ·          When the issue started?

  Step 1: Disconnect any external devices and try to start the computer.

  Step 2: Check if the computer starts in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See also: http://windows.microsoft.com/en-US/windows-vista/What-to-do-if-Windows-wont-start-correctly

• Error starting 3

  original title: error starting

  My computer just started this doing. any ideas on how to solve this problem?  with 3 error loading key

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Error starting "appName": Module "appName" is trying to access a secure API

  Dear all,

  I downloaded a few applications in the app world. When I try to install on the device, there is an error "error starting Sunfish6: Module 'Sunfish6' trying to access a secure API. I tried to update the files, he needs, but still get the same error message. What is the cause of the appearance of the error message? I developed this application using phonegap and blackberry webwork framework.

  Thanks & best regards.

  In the eclipse webworks menu, select project-> BlackBerry-> sign with Signature tool.

  Then upload the generated files.

• Error starting FreeLoader: Module 'KxmlLib' not found.

  The message "Error Starting FreeLoader: Module"KxmlLib"not found." what do I get when I try to run my application on a BB device.  In the Simulator, it does very well.    KxmlLib is a library to the library (preverified) BlackBerry project kXML 2 . The KxmlLib project is a project of the library without the source, just the pre-audit jar files and in the KxmlLib properties > Java Build Path > libraries a pre-audit jar and Properties KxmlLib > Java Build Path > order and export has the JAR checked for export.  I guess it's okay.

  After that it got a little hairy, I had to the the KxmlLib of the project a dependency of my application of FreeLoader project, run it on the simular to produce the KxmlLib JAR in the deliverables of the project KxmlLIB directory.  I removed the dependency of the project KxmlLib , copied from the KxmlLib.jar in the project space of the FreeLoader , right click on it project and added to the build path.

  Applications of freeLoader compiles and runs without any error of security on the Simulator.  When I try to package and run it on the device of BB, it fails.   Clues?  I browsed this forum before I asked - I solved all my other problems during development with the help of this community and the RIM fanastic.  Thank you very much!

  Brandon

  You will find that there is a cod associated with your pot of KxmlLib.  There is no end to your device unless you deliberately include in your distribution.  You may be signed too.

• Using new plugin error: error starting module. Of verification errors.

  I use eclipse Galileo and the latest version of the plugin.

  I created a project, and I was able to debug it about 50 or so times. After that, I can't run the project on the Simulator again. He complains saying this:

  Starting MiApp
  Module 'MiApp' has verification errors.Error starting MiApp: Module 'MiApp' has verification errors.
  

  These errors do not appear before, and I have not changed anything. Attempted to restart eclipse, own Simulator, recompile, but nothing works.

  MiApp is a UiApplication who uses a library module. The library is located in the debug settings.

  I have read the famous document on how to avoid mistakes review and none of the points worked. In fact, my application is not a MIDlet.

  I spent several hours (which I would have spent on development) without success, and I'm going back to the old plugin. This new one really sucks.

  I'm sorry it's late for that. He took 20 minutes to move the project to the old plugin environment, but invested much more although the two hours I spent playing with the new plugin and the search for the light in this forum and knowledge base.

  Now it works perfect, as expected.

  The old platform (eclipse 3.4 and plugin 1.0.0.67) is much more stable and easy to use.

• Error starting MyApplication

  Hello

  Because I developed application on the Simulator and it worked fine.

  Now, I downloaded the application for device via OTA and tried to run the application but I have error like below.

  ------------------

  Error starting Module MyApplication 'MyApplication' tries to access a secure API.

  ------------------

  Should that code signing? or another problem?

  Thank you

  DK.

  Yes.  Your application requires code signing.

  See the Javadoc for the API you are using.  It will include the following message from the not-so-friendly:

  Category: Signed: This item is only available to signed clients. If you intend to use this item, please contact RIM to establish the necessary agreements that will allow you to have your signed COD files. Signature is required for use on the device, as part of the JDE development may occur without signing the Cod.

• [FIXED] WL library error start error: Windows Live Photo Gallery encountered an error and cannot start. Error code: 0 x 80070035

  Original title: error starting in WL photo library

  Hello guys,.

  I use the photo gallery of WL (latest version) for some time, but one day it stopped working without remembering any important changes that might break a.

  When I try to run it, it gives this error:

  ---------------------------
  Windows Live Photo Gallery
  ---------------------------
  Windows Live Photo Gallery encountered an error and cannot start.

  Error code: 0 x 80070035
  ---------------------------
  Ok
  ---------------------------

  I tried to reinstall it but without success. I've also renamed the files Pictures.pdX C:\Users\\AppData\Local\Microsoft\Windows Live Photo Gallery, but with the same result.

  Not to mention that the event log does not contain messages recorded on this subject and also the follow-up of the process with Process Monitor did not show anything that would tell me the cause of this problem...

  If someone from the Live team or an MVP watch that I can send you the output monitor process or any other information that you might find useful.

  Any other suggestions on what I can try next?

  Thank you!

  Chris

  I'm waiting for the confirmation of the guys from the Live team on this, but I've corrected this problem.

  The error came from the fact that Windows registry stalled Chronogram of some access roads network I had on my computer from a former WHS (Windows Home Server) box so basically, Windows Explorer - WL photo library was still trying reach these network paths, even if in Explorer / settings there is no references to WHS, so registry entries in neutral paths and wrong...

  Replace the data of those key in the Windows registry under the HKEY CURRENT USER corrected this problem and I was able to start WL photo library.

  :)

• Crystal - «Error starting PeopleTools» report error

  Working in PeopleTools 8.52.22 with Crystal Reports 2008 (12.3.0.601)

  Not really experienced with Crystal.

  Creates a new query and report based on a... Crystal report work and the query can be connected without problem

  Added a process and attached to the component that is similar to the original of the report

  Everything seems the same, but when I run the report, the newspaper simply indicates "error start PeopleTools".

  Have tried many things... to restart the AppServer and ProcessScheduler too.

  At loss on what to do to allow this to run properly.

  I found my problem... in the drop-down list parameter... I had inadvertently 'Ignore' and that caused my problem.

  Thank you

• MacBook Pro running Mavericks: error starting Pro first

  I have a Macbook Pro 2011. I have Premiere Pro CS5, CS6 and now CC 2015. CS6 has worked for a long time, then came all of a sudden with this error:

  "Adobe Premiere Pro can't find capable video game modules. Please update your video display drivers and start over. »

  So I reinstalled CS5 of the thought of disk, it might be useful. I have CS5 on the Macbook, and it works fine. I can't figure out how to get CS6 once again, even though I have the serial number for it. I installed CC 2015 but it comes up with the same error for CS6 start-up.

  I went into System Preferences and made graphics of course automatic switching is turned off, rebooted, and it always comes up with the same error starting. What can I do to run the CC 2015? I'm fine with moving permanently to CC 2015 so I can't get CS6 once again, but I had rather not step back with CS5 if I can understand this problem

  Any advice will help. Thank you!

  First of all, can help http://www.adobe.com/downloads/other-downloads.html

  Second, the Mac utility for adapters double http://forums.adobe.com/thread/1017891?tstart=0