Error Symantec Framenetwork

Similar Questions

• Equium A60-155: error of the Symantec antivirus

  I have an error message from my anti-virus from Symantec that definitions of files are corrupt - this happens whenever the laptop is used - any ideas why it is doing this?

  I tried different antivirus solutions... McAfee, AVG, Norton etc. but they all have similar problems - not loading correctly, errors in programs or just dropped.

  I also reinstalled Symantec but which has not been set. I have also reinstalled the OS several times but it makes no difference.

  I tried to live with the Norton Security 2004, delivered with the laptop, but that will keep not itself no longer updated, and when I try the update, it just falls and accidents - and it's the image came with the laptop without any change made.
  This version of Norton also tends to make the laptop run like a 268.

  If anyone has any ideas please let me know.

  Hello

  As far as know license update Norton Anti Virus that has been pre-installed on the unit is available for 1 year. I think that after 12 months it of not possible update the file to virus definition, or you need to buy an additional license.
  But I don't think it's responsible for the strange problem.

  I put t understand this recovery procedure doesn't solve this problem.
  Have you had a second partition? Maybe you have a virus on the second partition?
  Unfortunately I m of ideas. :(

  Best regards

• I installed the latest version of Norton Internet Security (2013. I received the error message. Symantec's Service infrastructure has encountered a problem and needs to close.

  I am running XP Home Edition and have used the Norton Internet Security software for years.  Support includes an update of the software each year when they are available.  I received a message that the latest version of the software was ready to install.  Well, I installed the latest version and unfortuantely, I continuely receive the following error message...

  Symantec's Service infrastructure has encountered a problem and needs to close.  Contact Microsoft to resolve.

  Is there someone out there who has experienced this error that might be able to help?

  Confused and frustrated.

  Hello

  Thanks for posting on Microsoft Community. I understand that you receive an error message after update Norton Internet Security on the Windows XP computer.

  I apologies for the inconvenience and I it's frustrating if things do not work as expected. However no need to worry I'll be more than happy to help you.

  Please help me with the little information.

  (1) what is the exact full error message?
  (2) is it a paid version?

  Is it that you use not paid version, you can use this link to delete and reinstall Norton Internet Security.

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?version=1&product=home&LG=English&CT=United_States&docid=kb20080710133834EN_EndUserProfile_en_us&PVID=f-home

  You can meet with the screen shot to help you better.

  Reference: how i: post a screen shot on this forum?
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053

  Until you, you can also post the your query in the Forums of the Norton Support to improve assistance.
  http://community.Norton.com/

  Response with more information to help you.

• Vista: runtime error program c:\progra~1\symantec\liveup~1\lucoms~

  Hello. The other day, my computer crashed. When I turned it on, I got an error:

  --------------------------------
  Runtime error!

  Program: C:\PROGRA~1\Symantec\LIVEUP~1\LUCOMS~1.EXE

  This application has requested the execution to terminate in an unusual way.
  For more information, contact the application support team.

  -------------------------------

  After I got this message the first time I restarted the computer and then I realized that it took approximately just 1-2 Minutes in the reception of the screen, then it took about another 2 Minutes for my taskbar and icons to come. I did many virus scans and I found no viruses at all.

  I also realized that:
  -My Wifi would not connect
  -When I open Steam he comes up with a message saying:
  Steam.exe (main exception): WSAStartup () for error code returned 2.0 10107.
  -When you try to connect to MSN messenger, the 'sign in' button does not work. (No error message any can't)

  Is that what I can do without reformatting? If this isn't the case, then, please, still tell me.

  Hello

  Perform the methods provided.
  Method 1:
  Start the computer Safe Mode and check if the problem persists. Check out the link.
  
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  Method 2:
  If computers start very well in Mode without failure, then perform the clean boot and check.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Once the diagnosis is made, follow step 7 of section to configure the computer to start the Normal start.
  Method 3:
  Since the error associated with Symantec application installed on your computer you can contact Symantec support. Check out the link.
  http://www.Symantec.com/business/support/index?page=home
  
  Method 4:
  Disable anti-virus and firewall.
   

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  WARNING: If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 5:

  Update the drivers for the Wifi and check it out. Check out the link and follow the steps.

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  For the MSn problem plaguing the computer, you can check out the link and contact MSN support.

  https://support.MSN.com/

• Blue screen of the SRTSPL64. SYS (Symantec Endpoint) error on normal startup.

  Original title: , I get the blue screen of death of the SRTSPL64. SYS (Symantec Endpoint) error on normal startup.  How can I get rid of Symantec because Windows install does not work in safe mode?

  System: Windows Vista 64-bit

  Computer: Gateway NV52

  When I start my computer, it stops with the blue screen of death because of the SRTSPL64. SYS error.  I understand that this error comes from Symantec Endpoint that I am running on my computer.  Symantec is provided by the University I attend because users must have a valid antivirus program up-to-date and to access their wireless system.  I want to delete Symantec, but I can't get my calculation to start so I can access the menu to uninstall programs.  I can't uninstall in 'Safe' mode because the Windows Installer is not active.  HOW TO MAKE MY COMPUTER SYMANTEC?

  In addition, I can't a good restore of system restore point so that the option is not available.

  Hello

  I would recommend that you put your computer in a clean boot in SafeMode State, then try to uninstall Symantec Endpoint and check if that helps.

  Note: Follow step 7 to your computer as usual.

  See also:

  How to manually uninstall the client of Symantec Endpoint Protection for Windows Vista, Windows 7 and Windows 2008 32-bit
  http://www.Symantec.com/business/support/index?page=content&ID=TECH102286

• Internet Explorer and the Service of Symantec infrastructure have stopped working due to the error of InPageCoFire

  Original title: InPageCoFire

  I get a pop up message that Internet Explorer has stopped working and I am prompted to close the program. I also have a message that Symantec Service framework stopped working. In both cases, the error message is InPageCoFire. Someone at - it a fix for this problem?

  Hello

  1. don't you make changes to your computer, after which the issue started?
  2 is updated your security software?
  3. What is the exact error message you get?

  I suggest that you check the hard disk for errors.

  Check a drive for errors

  Warning check disk.

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  See also:

  Internet Explorer does not start or stops responding

• "Error 1606. could not access network location appdata"while trying to install symantec

  Also, I got this error message trying to update adobe.  But my main concern is trying to install Symantec and displays whenever it is in half way through the installation, this message.  I read things on going into the registry and looking at paths, but all for windows 2000 and others, but not for vista.  Someone knows how to fix this problem on vista?

  Try these trouble her. If one does not work, use the other.

  • http://support.Microsoft.com/kb/2258121
  • http://support.Microsoft.com/kb/886549

  If neither works, create a new administrator account and lets try to install.

• HP 8760w Symantec Ghost 11.5.1 'Ghosts' problem/error code v. salvation all intelligence stop there...

  Hi all

  Trying to create an image of a HP8760s (Win 7 Enterprise loaded) using the Symantec Ghost program. Still imaging process leaves at 99% and displays the following error: cannot allocate page table memory. If someone has experienced this problem and if so how do solve you this problem? Any recommendations would be greatly appreciated. Thank you!

  BTW... I did google the error and you tried to use a CD bootable Ghost... etc... parameters of the evolution of the situation... etc... no luck.

  I know that it is an earlier version of the Ghost software... but what we have right now... Thanks again. !

  Hi all, found a solution:

  I figured out that the lenovo use AHCI and pcdos does not recognize ahci. I disabled the ahci in the BIOS under the parameters of the hard disk and set the boot sequence to boot for the IDE (not AHCI drives) drives and it worked.

  Dollar Bennett - http://forums.miamitechs.com/index.php?topic=9343.0

  In my case, the material was a HP 8760w workstation elite... change above suggested by 'Dollar Bennett' worked for her and the system can now be ghost.

• Support of Symantec Endpoint Protection tool gives the error of strage on userinit vs Userinit

  I get the following Symantec error

  Registry value: "HKEY_LOCAL_MACHINE Winlogon Userinit" is set to "C:\Windows\system32\userinit.exe,C:\Program files (x86)\DigitalPersona\Bin\DPAgent.exe,". It should be "C:\Windows\System32\Userinit.exe,".

  Their message is correct?  If so, how can the problem be solved?

  Hello

  The question you have posted it will be better answered by Symantec forum. Please click the link http://www.symantec.com/connect/ and try to communicate with them. If you encounter problems with Windows, let know us and we will be happy to help you.

• Impossible to install the symantec .exe file, error windows must be restarted

  Hello!

  I recently lived with a problem while installing symantec antivirus, when I try to install or run this file, the error is showking as symantec has detected that the system must be reset to install this... I rebooted several times, but the problem always arises. Please can you solve this problem? Just reply to me as soon as possible if the problem can be solved.

  Concerning

  Mohammed Fahed

  Hello

  1. don't you make changes on the computer before the show?
  2 is the limited with the Symantec AntiVirus installation issue?

  Method 1:
  You can try the steps in the link and check.
  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651

  Method 2:
  Perform a clean boot and check if you are able to install the program.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

  Method 3:
  You can check if the windows service install is started. Follow these steps:

  a. Click Start, type services.msc in the start search box and press on enter.
  b. in the list of Services (Local), right-click on Windows Installer and then click Properties.
  v. If startup type drop-down list is set to Disable, select the manual option in the drop-down list startup type.
  d. click the button under the status of the service item and click OK.
  Method 4:
  You can run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  Reference link:
  Install programs: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/installing-programs-frequently-asked-questions

• Error page of Norton Symantec

  Using OS X Yosemite 10.10.5 version

  • running Norton Anti Virus
  • using Google Chrome

  Ceases to be an error page stating 'Norton for Chrome extension cannot communicate with the Norton Security application.

  • no update needed for OS X, Norton or Google Chrome

  Very annoying - just want the page go away.

  Please uninstall Norton antivirus.

  This application is not necessary on a Mac.

  https://support.Norton.com/SP/en/us/home/current/solutions/v64924250_EndUserProf ile_en_us

• Firefox not working in Win7 now it crashes at startup even after a clean install. is there a problem with Symantec?

  Firefox worked on my Windows 7 desktop. One day he gave me a report of crash at startup, I went through the troubleshooting procedures suggested. I tried restarting, upgrade, uninstalled and reinstalled, uninstalled and cleaned the files and the registry and deleted the files module then resettled but nothing works. It keeps giving a crash report on startup. I remember that my Symantec software gave a message that FireFox has been stopped due to an attack on my system. Ever since then, it won't work and I can't seem to cross the screen to crash at startup of FireFox.

  Thank you for the report crash IDs. If you open the error reports and click on the 'Modules' tab, you will see that the first on the list in each case is "FLVSrvLib.dll". This module installs with various programs of Applian Technologies including Freecorder and Replay Media Catcher.

  This crash is closely related to have BOTH software Applian software of security AND Norton. As no doubt you don't want spend away from Norton, you can remove or disable the Applian software as follows:

  (1) uninstall and restart

  If you have either of these programs and it is not essential, try to uninstall it then restart Windows to ensure that none of its components are running.

  Firefox will start normally after that?

  (2) avoid auto-start

  If you do not uninstall the program, a few others said using the msconfig program to stop execution at startup FlvSrvc.exe circumvented the problem.

  See: http://windows.microsoft.com/en-us/windows/using-system-configuration

  You may still need to restart to unload the software of your current Windows session.

  Success?

• Mozilla, your last update does not include the last cert of intermediaries of extended validation from Verisign, Symantec class 3 EV SSL CA - G2, please fix ASAP

  Your last update of firefox, Mozilla does not include the last cert of intermediaries of extended validation from Verisign, Symantec class 3 EV SSL CA - G2, please fix ASAP

  Firefox never includes the intermediate certificates.
  It is the responsibility of a server to include all the intermediate certificate required to make it possible to build a certificate chain that ends with a trusted root certificate embedded.

  Note that Firefox automatically records the intermediate certificates that servers send in certificates for future use Manager (they appear labelled as 'Software security device' in the References tab).
  If a server does not send a complete certificate chain then you get an untrusted error when Firefox has stored missing intermediate certificates to visit a server in the past that a send it, but you get an untrusted error if this intermediate certificate is not yet registered.

• Can't access websites from symantec

  I use 19.0a2 Aurora (2012-12-21). I can't use liveupdate to update my Symantec antivirus.
  I can connect to symantec.com but not
  LiveUpdate.symantecliveupdate.com
  LiveUpdate.Symantec.com
  Akamai.NET
  I'll be back what about error message cannot find the ip address.

  Using the same program on my laptop wireless with Aurora 18.0 I have no problem

  Any suggestions

  The HTTPS setting is 'I want to use the proxy server specified by my client browser (by default).

  No, I can't connect using IE8.

• Satellite 2430-402: 437 Application error during recovery

  Right, I've got a Toshiba Satellite 2430-402 (purchased new) for at least 3 years. I have formated several times before and re-loaded windows back on with no problems until now.

  The problem only started two days ago, when I noticed my CD drive was not recognized. So I decided to format etc, came out the disk Recovery Utility that came only with the computer to install everything, and it will not go beyond 12%. I'm greeted by * Application error 437
  Can not read the file.

  I left really stuck and cannot load anything. I fdisc / formatted /spinrite / kill the hard disk, just in case where there is something nasty on here and can still get nowhere. This is the first time I'm really stuck.

  This could be the engraver of CD or would it be the hard drive or basically the computer is nakered. I inspected the recovery disk, and they are all clean!

  Or is it because I made an update of the bios (you mind, it was weeks ago)

  Everyone please

  Thanks in advance

  Hello

  to my knowledge, the Ghost image files are placed on the Toshiba Recovery CD.
  That's why I studied on the ghosts manufacturing Web site.
  It s Symantec and found this information site:

  HM http://Service1.Symantec.com/support/Ghost.nsf/0/14579a4173691f8988256abf005f4f8f?OpenDocument&SEG= & lg = fr & ct = us

  According to this page this problem seems to be due to starting the computer incorrectly when you use Ghost with GoBack on the computer.
  This problem may also occur when you use a brand or type of CD that works well with your CD - R or CD - RW device. In this case, Windows or DOS might be able to read the information on the CD that other applications cannot.