Error - temperature of the system (90 d)

Similar Questions

• Temperature of the system at 90 c in Portege R700

  When I turn on my Portege R700 and immediately open the Toshiba PC health program (monitoring sensors) it shows the temperature of CPU either very low, of course, while the temperature of the system is already at 90 C.

  As a result (I think but I could be wrong) the fan runs at almost maximum speed.
  The situation does not change in time: rest CPU temperature generally less 40 c, the temperature of system at 90 c, fan still spinning fast.

  Is this normal? The cooling test program says everything is fine.

  Daniele

  You should try to perform a cleanup of laptop:

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=40

  > Toshiba PC (sensors monitoring) health program it shows the very low CPU temperature

  Hmm... If it shows that the temperature is low, but it goes up to 90 C, means do not work properly. Reinstall it, but before complete cooling system cleaning

• After many attempts computer will not allow the system restore. Received message is... Unspecified error occurred restoring the system durning

  After many attempts computer will not allow the system restore. Received message is... Unspecified error occurred restoring the system durning

  Hello

  If you use Norton, which could interfere with the restoration of the system.

  Disable Norton while doing your system restore.

  See you soon.

• Envy 17 t-3200: temperature of the system (90 d)

  OS: Dual Boot Windows 7\Windows 8.1

  BIOS: Insyde F.0B, 02/01/2013

  CPU: Intel (r) Core i7-3820QM CPU @ 2.70 GHz

  Graphics1: Intel(r) HD Graphics 4000

  Graphics2: Radeon (TM) HD 7850 M

  Normally I turned off the laptop by selecting 'Sleep '. So I reboot rearly unless an update of Windows requires action. In the package of a few weeks, I noticed that the laptop restarts the following appears: "thermal shutdown has occurred. THE system BIOS has detected that your laptop has been stopped or will point... Temperature of the system (90 d).

  I cleaned the vents. I did a hard reset. I should rephrase what I just wrote. I have done several resets successively in order to display the login screen of Windows 8. During this process, the laptop fans are running very strong. To reduce the fan speed, strong spinning fans, I put the laptop to sleep and then wake it up.

  Should what steps I take to solve this problem? Restart the laptop results in the temperature of the system (90 d).

  HP was able to resolve my problem where the urge would be stop in seven seconds after pressing the powerbutton. The fix involved replacement of several hardware components among them where the Council sytem, the fan and the heat sink.

• Error message "the computer restarted unexpectedly or encountered an unexpected error" after starting the system on Windows 7 Recovery.

  While trying to reinstall Windows 7 on my Dell Inspiron 1545 of the reinstall DVD after you have installed a hard drive again, I got this message: error message "the computer restarted unexpectedly or encountered an unexpected error" after starting the system on Windows 7 Recovery. Tried F10, SHIFT F10 and nothing happened. Then I tried a suggestion of virtual Agent to press F8 to get to advance Boot Options, but this option does not appear! Help!

  For Dell cptrs, you will need to press F12 to access the unique Boot Order Menu(= a temporary setting), little after the Dell logo appears on the desktop. U hv only 5 seconds to do, b4 the cptr will automatically initialize to top with the internal HARD disk.

  ....... F12 is usually used to start the cptr since the DVD player or a plugged in USB-flash drive with a Win 7 install or recovery media.

  To permanently change the boot order, you must similarly press F2 to access the full Boot configuration Menu. The default boot device is the internal HARD drive, but this can be changed to DVD player, USB, disk, network drive, etc. F2 is usually used to start the cptr of an external hard drive(= USB HDD) that contains a bootable Linux operating system.

• Overheating system, how can I check the temperature of the system crashes?

  Overheating system, how can I check the temperature of the system crashes?

  By installing a third-party utility monitoring temp, google, there is a lot to choose from.

  Theres probably a bios on setting temp that will trigger a shutdown to avoid damage

• The system has encountered an error during the interview of the application. If the error persists, contact the system administrator

  Hi all

  We cloned an Oracle EBS R12.2.2 instance and it worked very well for us. To increase the RAM of the newly created virtual computer, we did the virtual machine down. Once the RAM has increased, we started all the services (without error), including level of DB and Application layer. But when we try to access the application of EBS get the following error:

  -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  The system has encountered an error during the interview of the application. If the error persists, contact the system administrator.

  -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  
  

  Then I checked all the services, they are running.

  
  

  Log file: / u01/applmgr/SCREWS/fs_ne/inst/VIS_ebsr72/logs/appl/conc/log

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Process of shell VIS_0402@VIS Manager internal simultaneous departure - ID 6095

  logfile=/U01/applmgr/vis/fs_ne/inst/VIS_ebsr72/logs/appl/conc/log/VIS_0402.Mgr

  PRINTER = noprint

  mailto = applmgr

  Restart = N

  diag = N

  sleep = 30

  PMON = 4

  quesiz = 1

  Reviver is ENABLED

  CP-SYSTEM ADMIN RESP. internal MISSINGThe competitor Manager encountered an error.

  Check the simultaneous log manager for more information. : APRIL 2, 2014 14:21:59 -

  Shut down the internal concurrent Manager: April 2, 2014 14:21:59

  List of errors encountered:

  .............................................................................

  _ 1 _

  Systematic AFPCSQ can't nec USER_ID value of the profile option. ORACLE

  error 1403 in get_responsibility_data

  Cause: get_responsibility_data

  has failed because of the ORA-01403: no data found.

  The SQL statement being executed at the time of the error was: and

  a exe

  .............................................................................

  APP-FND-01388: cannot read the value for option profile SQL_TRACE in routine and ROUTINE.

  List of errors encountered:

  .............................................................................

  _ 1 _

  Routine AFPCAL has received the code of failure while running or analysis of your

  simultaneous program CPMGR

  Examine your log file of concurrent application for more information.

  Make sure that you pass arguments in the correct format.

  .............................................................................

  The internal concurrent Manager VIS_0402@VIS ended with the State 1 - abandon.

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Note: Before you restart the virtual machine it worked great. It has not changed anything except the RAM to the virtual machine. After the start, we get error.

  I need your help. Please suggest me.

  Thank you

  Prabhakar

  Hi all

  Thank you for your support. I solved the problem. Find the info below.

  ===================================================================================================

  Question: Like I said existing VM is cloned VM. Then after we had changed the host name. I checked the database alert log file:

  Before the reboot: name of the node was the previous still node name VM that it functioned very well. (for ex: xyz.domain)

  After the reboot: name of the node is replaced by the new host name. (for ex: abc.domain)

  Once the name of the node is changed he started creating problem in starting the application services.

  One last thing, I want to mention here after hostname change, approval of new contextfile has 700, but it should be 755.

  Solution: I followed these steps.

  (1) stop all services on the LAYERS of the DB and APP

  (2) change the new contextfile permission if not 755 and the .env at the level of the source DB

  (3) cd $ORACLE_HOME/appsutil/bin and run as: perl adgentns.pl appspass = apps contextfile = $CONTEXT_FILE - removeserver

  (4) change the name from old host to the new host name, so find in contextfile.

  (5) start listener, then the database

  (6) listener status, it must must give service to the db instance

  (7) perform autoconfig with new contextfile (DB Tier)

  (8) perform autoconfig (pane APP)

  (9) start all services

  ======================================================================================================

  It works for me, and now the application is running. I hope that it will also work for others.

  Thank you

  Prabhakar

• I need to import a simple Excel file in InDesign, but it must be free of error, what are the system requirements of InDesign and Excel?

  I need to import a simple Excel file in InDesign, but it must be free of error, what are the system requirements of InDesign and Excel?

  but it must be free of errors

  Do you mean without errors in the text or formatting? When you place an Excel doc, the Place dialog box allows you to display Import Options. You can choose to place as a non formatted table and apply to any InDesign Table Style.

• Get failure catastrophic error when running the system restore

  Original title: System Restore

  When I try to use the system restore I get a message syaying that system restore did not complete - this error 0 x 80070057 and he SIAS catastrophic failure

  Anyone knoe what to do to fix?

  Thank you

  Maggie

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/system-restore-error-0x80070057/0b8c7c81-3fe9-4D43-8369-1a41a5756171

  It will be useful.

• Cannot start Windows install error "3 that the system cannot find the path specified".

  Original title: problem with Windows install

  the installer of Windows won't work, made sure that it's automatic in services, but when I click start it says error 3, the system cannot find the path specified

  Hello

  1. Did you changes to the computer before the problem occurred?

  Method 1: I suggest you unregister and re - register the windows setup program and check if that helps you. To do this, please follow the steps below:

  Unregister and register the Windows Setup program again

  (a) click Start, click run and then type cmd in the dialog box, and then click command prompt.

  (b) at the command prompt, type the following and press ENTER after each line:

  MSIExec /Unregister

  MSIExec/regserver

  Method 2:
  Also I suggest you to update your installation Package of Windows with the latest version of Windows Installer available in the link below.

  Windows Installer 4.5 Redistributable:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Hope this information is useful.

• KB967102:stop 0x000000FE error when resumed the system of sleep__

  Received the above error code and it asks me to download a fix on the page there are 3 different options don't know which one to choose, these are the options

  Windows Vista x 86 SP3 difficulty 291684

  "           "    x64    "      "        "

  "            "    1a64  "      "        "

  Any help is very appreciated very computer savvy

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  0xfe Stop error message is BUGCODE_USB_DRIVER - "This indicates that an error occurred in a Bus driver universal series (USB).".

  If a fix is available, you would install an appropriate for your operating system.  You are running a 32-bit (x 86) version of Vista or a 64-bit version (x 64)? If you are unsure, click the beginning round, type winver, and press ENTER.  Otherwise, you have a folder "c:\program files (x 86)" and a "'c:\program files" file? "  Or you just file 'c:\program files'?  (If you have both, you sure good enough to run the x 64 version.)

  If the fix does not help...

  Update the drivers for any USB devices help you, or disconnect all the USB devices on the system.  Then selectively add devices in the system and try to reproduce the problem - try to identify the aircraft involved in the accident.

  General to deal with the bluescreens indications:

  Consider running chkdsk on all partitions.  Leave complete chkdsk on each partition and see if that helps.

  It may be useful to use the driver verifier.  To activate the... Driver Verifier start-> verifier.exe-> OK-> create standard settings-> next-> driver select the names to a list-> next-> sort by provider-> select all other Microsoft drivers-> finish and OK your way out of the dialog box.

  Then restart and use the system as you normally and wait for a problem.  In case the system does not completely start after activation of the Verifier, boot mode safe and run driver verifier and tell him to remove the changes.

  Wait for a bugcheck occurs after you have enabled the auditor as described, and then download the dump on your SkyDrive and provide a link.

  Also consider running SFC/scannow.

  If you start in safe mode, do you still feel bugs? What if you do a clean boot, or boot device?

  Consider the memory with memtest86 or Windows Memory Diagnostic test. Note that memory that pass the tests isn't necessarily good memory - he not only failed a review.  Examine systematically to eliminate the system RAM - run with a few modules for awhile and see how things are going. Then try the other modules.

  Other common suggestions include ensuring drivers are up to date, but also to ensure that you use the latest version of the BIOS.

• I get errors saying that the system memory is low.

  Hello. -A message that my system memory is low. -J' tried RESTORING the SYSTEM. but the warning is always present. -I am advised to close all OPEN PROGRAMS AND re - INSTALL. But I don't know how to do this. Could you please help. -Friendly - IAN RIPPINGHAM.

  original title: SYSTEM MEMORY IS LOW.

  Hello

  1 did you do changes on the computer before the show?

  2 - is the message full error ?

  See the site mentioned below for the procedure to uninstall a program:

  Uninstall or change a program

  http://windows.microsoft.com/en-us/windows7/Uninstall-or-change-a-program.

  Again, you can install programs by using the installation media supplied by the manufacturer or by downloading it from their site.

  I would say as you to see the site mentioned below:

  Prevention of problems of memory

  http://windows.microsoft.com/en-US/windows7/Preventing-low-memory-problems.

• What is the next step after an unspecified error occurs during the system restore

  My computer shuts down saying windows has been shut down to avoid damage.

  disable or remove all equipment recently installed software.

  System Restore does not complete successfully.

  How can I find the dates various programs have been installed. I can find the programs, but not the date they were installed.

  The problem began in mid-September, so I would like to search by dates.

  I have dates for updates to windows, but not programs other than windows.

  Hello

  This can help you with problems with the system restore:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  2. try to use Safe Mode system restore.

  http://bertk.MVPs.org/html/restoresysv.html

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• I get a msg of error: Stop: c000021a {fatal system error} subsystem of the system

  Hello, Hello...

  I have an error when whenever I start my laptop and it will return to market after a few seconds after that boot then BSOD (blue screen of death) appear with msg like this...
  STOP: c000021a {fatal system error} the process window system subsystem ended unexpectedly with status c0000005 (0x75e9ad15 0x0052f240). Then the BSOD stuck there and forcing me to press the reset button to restart the laptop... What is the cause that happen to my system of the laptop? Sometimes it restarts automatically when I try to install a new version of the Media Player Classic player, open a video in Media Player Classic, open the Opera web browser and some kind of emulator PSP (Playstation Portable).

  In addition, I noticed there is some sort of process that runs without warning when I try to monitor using Process Explorer, the process is "wscript.exe". before that my laptop is not running this kind of process, but it in courses run once I started a laptop after I installed Dev C++ application, DOSBox (emulator of game back) & Opera web browser.

  How can I solve this problem?

  I use

  Acer TravelMate laptop computer
  Intel Celeron
  Microsoft Windows XP Professional SP2

  p/s: sorry for my bad English.

  You get the error because Winlogon.exe or Csrss.exe is a failure.  The cause could be installed incompatible system files, program service pack installation has failed, the backup did not work right, or an incompatible third-party program has been installed.  From the sounds of it, you'll first want to take a look at the programs that run at startup, as is usually the last of those above problems that caused the problem.

  Here are some sources: http://support.microsoft.com/kb/156669 and http://www.computing.net/answers/security/stop-c000021a-fatal-system-error/20937.html
  I hope this helps!

• What does this error message on the system restore?

  Could not create the scheduled task for the following reason: support for transactions in the specified file system resource manager is not started or has been stopped due to an error.  (0x80071A91)

  Hello

  Did you change your computer before this problem?

  You can check out the article below and see if it helps.

  You cannot change the settings for a file backup operation or use the Windows Task Scheduler to change the schedule of defragmentation in Windows Vista

  http://support.Microsoft.com/kb/939615

  See also:

  Error message when you try to perform a backup on a Windows Vista-based computer: "0x80071A91".

  http://support.Microsoft.com/kb/939399