error the file acrosup64.dll is not marked for installation

Similar Questions

• While trying to update the drive, I get error 2753.  The file 'acrosup64.dll' is not marked for installation.

  I get an error trying to update the drive that is suggested by creative cloud.  Error 2753.  The file 'acrosup64.dll' is not marked for installation.    I tried to uninstall and re - install drive, but when it's time to update again, I get the same error.  Is there a solution or get around it?

  Hi freddiebegood,

  Please see this KB for the solution https://helpx.adobe.com/acrobat/kb/error-internal-error-2753-install.html.

  Kind regards

  Nicos

• Hello, I can't update Adobe reader. 2753.the error file 'acrosup64.dll' is not marked for installation.

  

  Looks like you're under Windows.  Download and run the cleaner tool http://labs.adobe.com/downloads/acrobatcleaner.html then download the Installer http://get.adobe.com/reader/enterprise/ offline

• Could not complete the installation because of the error "acrosup64.dll is not marked for installation.

  Hi all

  In the course of implementing in place process with my computer window Mobile 7-64 bit, it was display error message "acrosup64.dll is not marked for installation" interrupt the process.

  Someone help me overcome the question please. Thank you

  

  Have you tried just download the EXE and install it from there instead of the web installer?

• Error 2753. The file 'Dist_acrotray.exe' is not marked for installation

  Hello

  I tried for days understand this problem with the Adobe Acrobat X Pro update. Whenever I try to update the software, via slot help, or click the icon to update in the system tray, then proceed to download the update, but get the error 2753. The file 'Dist_acrotray.exe' is not marked for installation.

  I tried to fix the software from the Control Panel, and I also reinstalled Acrobat as well. Help, please!

  Thank you

  Mike

  Specifications of the computer: Win7 Ultimate 64-bit

  Hi mobl11,

  You may wish to consult the Doc KB: http://helpx.adobe.com/acrobat/kb/error-internal-error-2753-dist.html

• Satellite U200: The file 'setupdiu.exe' is not marked for installation of BT

  When I tried to install the last stack of BT on my Satellite U200 installation stops with this message:
  The file 'setupdiu.exe' is not marked for installation.
  How to handle this problem?

  Hello

  you say the last won´t of BT-stack install? Which version is on your system installed? Sometimes an installation program needs a specific previous version to be able install
  the next higher version.
  So where you downloaded the package?

  Would be recognizing some comments, can we get a resolution.
  Welcome them

• Satellite a200-1GH: the file 'setupdiu.exe' is not marked for installation

  I have Toshiba Satellite a200-1GH and Windows XP Professional SP2 Rus

  I have download the latest battery Bluetooth toshiba downloads.

  Installation process has not finished, there is a mistake.

  How can I solve this problem?

  Remove the old BT battery, clean the registry with a 3rd party tool i.e CCLeaner and then try to run the BT facility.

  Good luck

• System Restore error: file spp.dll is not designed for windows or there is an error.

  Original title: download spp.dll

  My SPP.dll file is 0 kb.  When I try to access the system restore, it indicates that the file spp.dll is not designed for windows or there is an error.

  How can I get another spp.dll file? I can download one from the internet.  I tried but just keep getting a service offering public fixit. I bought RegUtility, but it did not fix the file.

  Try to run the System File Checker:

  http://support.Microsoft.com/kb/929833/en-us

• Code error 0x7E - the file 'autorun.dll' could not be loaded or is damaged. Setup cannot continue. Windows 7 Upgrade installation problem

  I tried to install Windows 7 Home Premium Upgrade, 32-bit version. My current system is an Intel iMac (later), with Windows XP - SP3 loaded as a virtual machine with Parallels Desktop 4.0 build 3848 (according to their website, it is supposed to support Windows 7).

  I allocated enough space RAM and HARD drive of the virtual machine to run Windows 7. No matter what I do, when I try to run setup.exe, I get the error message: "the file 'autorun.dll' could not be loaded or is corrupt. Setup cannot continue. Error code is [0x7E].

  The file 'autorun.dll' is present on the disk.

  I saw on the internet that other people have also had this problem, with or without Parallels Desktop, and get a replacement DVD of Windows 7 program made no difference to them. Nor is it an available answer, I've seen.

  My Windows 7 disc is new, so I was hoping that Microsoft could solve the problem for me?

  Thank you.

  
  

  
  

  OK, so, this response is a little late to come, but if you never solved...

  I just encountered the same problem - editing similar (Mac, Parallels 5 in my case, the SP3 of XP, MS Windows 7 Home Premium Upgrade) - you must make sure that the DVDROM drive hardware is mapped to "D:" on your XP installation. Thus on the Parallels Desktop menu go to devices, CD/DVD1 and make sure that all your actual DVD player is called is selected (should be the vertical entry in the menu) - not true CD/DVD. The reader should then start and auto run.
  I hope this helps...

• Error message - file inetppui32.dll is not a valid Windows image

  Just started happening after years of use. Each computer xxx.exe file or I try to load I get this error message "xxx.exe - bad Image of the application or DLL C:\WINDOWS\SYSTEM32\intppui32.dll is not a Windows image. valid Please check this against your installation diskette. »
  When I click OK the file loads normally. The problem is that I do that about 50 times when starting. That means "Please check this against your installation diskette"? How this is done? How dooes one to take to solve this problem? Thank you

  Hello

  Please tell us a little more about the system. What is the brand and model of the computer? Do you remember anything specific that past that you think could have triggered these errors?

  In addition, please tell us what you run antivirus software.

  For more information, take a look at this and see the answer marked as the JoseIbarra response.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/error-the-application-or-DLL-is-not-a-valid/fa12c4dc-C175-4399-A0A9-f50aa085c901

  I hope this helps!

• "The file 'autorun.dll' could not be loaded or is corrupt.

  Original title: autorun.dll could not be found

  I'm trying to install Windows starter on my system (net accountant) currently using Windows 7 Ultimate edition.  It will not even start the process, which gives me the error message: "the file 'autorun.dll' could not be loaded or is corrupt. Setup cannot continue. Moreover, I found the file autorun.dll 'source' folder  However, the installation program is not see it.  It is a download, it's a Windows starter.iso file, I try to install the 32-bit version, I had antivirus in my system M.S Essentials, im trying to install from USB key no help?

  Hi Praveen,

   

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

   

  1. you are trying to install Windows 7 Starter on another partition?

  2. which type of installation you are trying to run?

  If you try to install Windows 7 Starter on the same drive where Windows 7 Ultimate is installed, then you must perform a clean installation.

  Follow the link for the reference below:

  Installation and reinstallation of Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  Warning : Before installation, you must be prepared for the worst scenarios that led to your existing data on your computer being removed. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other storage devices before performing a clean install.

   

  I hope that the information above helps you.

   

• Error - the application or DLL is not a valid windows image. Please check this against your installation diskette when trying to open a program or start the computer.

  Original title: bad image.

  I get two errors of bad image whenever I open a program or start a computer, for each program.  the error that says "the application or DLL is not a valid windows image. "Please check this against your installation diskette" I don't have any disk and don't know what to do.

  These file names, look a little suspicious and didn't get good Google search results, so I think that the first thing to do is to tell us a little about your system.  Now you can enjoy when you report a problem, provide you with any error messages you see and not a part of it (not paraphrase either).

  The second thing to do is to try to be reasonably sure that your system is free of malware and then if you have these problems, you can fix them (which would be the third thing to do).

  I still wonder why the Microsoft Support Engineer made you reference to an article that makes no sense at all...

  The first thing to do:

  Unfortunately, MS Answers forums does not prompt for any information system when a new question is asked, so we don't know anything on your system.

  Because the Microsoft Answers forum does not ask for any type of information system when a new question is asked so we don't know anything about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  Your system have IDE or SATA disks?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  The second thing to do:

  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  The third thing to do:

  Restart your computer and solve the outstanding issues.

• try to install 4 GB of ram. Get the error «the file header checksum does not checksum» calculated

  Microsoft online tech help recommended I install 4 GB of RAM on my Dell Vista Home computer. The first stick fine boots.

  When I add the second stick the computer poster "the file may be damaged. The file header checksum does not match to the

  checksum calculated. "I see that it is a common error message online search, but nothing specifically addresses

  the issue of the Ram. Any help out there? Thank you.

  Hello

  You can contact the manufacturer of your computer for support and check if it helps.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support?c=us&CS=19&l=en&s=DHS& ~ CK = anavml

• Error - the file awduu36e.sys is not found. Press a key to continue, not able to start after having done the repair of the system on the XP machine.

  Original title: the awduu36e.sys file is not found.

  After a repair of windows XP SP3, I receive, at startup, the message "the file awduu36e.sys is not found. Press a key to continue"- I can't press a key because the keyboard is not recognized or active at this point in the trunk, although I can access the BIOS earlier in the cycle. I tried to boot from the CD from Microsoft but get the same problem. -Any ideas please?

  "cadastra" wrote in message News: 80941b1a-7 c 69-4f05-a259-560357b7f291...

  Hi Kim,

  First of all thanks for respone and sorry for the delay to return but am in Australia so bit of a lag in time!

  OK the sequence goes as follows:

  1 gigabyte MB BIOS screen - at this stage sensitive keyboard and I can access BIOS OK.

  2. new screen - PCI resources; Checking DMI Pool etc. ;

  3. new screen - "Please choose which startup option:

  -Windows XP Home Edition

  -Installation of Windows XP.

  and countdown etc. - from this point in the sequence of the keyboard does not respond so cannot select the OS and inadmissible F8, then highlighted option default selected that is configured.

  4. new screen - "check you computer hardware configuration...".

  5. new screen - "the file awduu36e.sys is not found. Press a key to continue. "

  As the keyboard is unresponsive after the BIOS screen I have no way of influencing the order above.

  Other relevant points:

  -When you make commissioning/repair day I received the message to halfway through - "awduu36e.sys file is not found" and the option start over or ignore; after another attempt to a couple of times I chose skip so I guess that I got myself into this mess. What is awduu36e.sys anyway?

  -My copy of Windows XP Home Edition SP3 OEM is and has been installed when I got to the machine, so I think that some repair options are not available for me in any case.

  Again thank you very much for the reply and any help you can provide,

  Kind regards

  Fraser

  Looks like you are leaving it too late to use F8 (must be before the OS options appear)- and you have a partial installation of some versions of Windows in progress seeking the file on a CD.
  
   
   
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• Printer error ' ' the installed print head is not intended for this printer or is damaged.

  Original title: printer does not print

  I have a hp photosmart B110a all-in-one printer and the following warning came on the screen. "the installed print head is not intended for this printer or is damaged" useless to Sam the printer now does not work. can someone advise on how to remedy the situation. Thank you

  I have a hp photosmart B110a all-in-one printer and the following warning came on the screen. "the installed print head is not intended for this printer or is damaged" useless to Sam the printer now does not work. can someone advise on how to remedy the situation. Thank you

  Hello

  You will need to contact the HP Support for this hardware problem.

  HP drivers & support | United States:
  http://WWW8.HP.com/us/en/support-drivers.html

  You can also check on the Forums of HP Support for other users who may have solved that problem.

  HP - HP Support Forum Support Forum:
  http://h30434.www3.HP.com/PSG/

  Concerning