Error - the file awduu36e.sys is not found. Press a key to continue, not able to start after having done the repair of the system on the XP machine.

Similar Questions

• When I try to reinstall Windows XP on my Toshiba laptop, it works until I reboot. Then it says nvrd32.sys not found: press any key to continue.

  original title: NVRD32. SYS ERROR

  When I try to reinstall Windows XP SP3 on my Toshiba laptop, it works until the first reboot. When I boot on CD it comes up saying nvrd32.sys is not found: press any key to continue. When I press a key it is said: the Installer failed. Press a key to restart your computer.

  So, I don't know what to do. I tried searching on google and found a set, but talk of computer that I couldn't begin to understand. Basically, what I consider somewhere or can I fix it myself? I just paid for a new disk of Windows XP SP3, so I'm not looking forward to having to pay someone to use it.

  Hello

  ·         Windows XP came preinstalled on your laptop?

  ·         If so, you have a recovery partition?

  ·         Where did you buy the disc of Windows XP SP3 for?

  nvrd32.sys file is a chipset driver and must be installed via floppy F6 during initial installation.

  Method 1: To do this, follow these steps.

  a. you can download the chipset drivers from Toshiba Web site and copy it to a floppy drive.

  b. press F6 at the start of the installation of Windows XP.

  c. follow the on-screen instructions to install the drivers for the chipset.

  Method 2: You can contact Toshiba to restore to factory on the laptop.

• Acer Aspire One will be not run Office Starter after having uninstalled windows 10

  I made a huge mistake and clicked on the link to get Windows 10.  After you have installed Windows 10, I realized that the Office Starter Edition on my Acer Aspire One is not compatible.  I started Windows 7 but now Office Starter will not work.  I try to fix but get a message that says I don't have an internet connection.  Yes!

  Hello

  I advise you to put your PC with [Alt] + [F10] and perform the updates. Using "Back to Windows 7", you lose a lot of applications and have a few problems.

• Portege 2000, the file fcpcmcia.sys is not found

  I want to install windows XP in a machine Portege p2000 but after the first reboot, the display shows only:

  The file fcpcmcia.sys is not found

  Press a key to continue.

  I have Toshiba phone and they can't help me. Any suggestions?

  BRIEGA

  Hello

  Tell me how you do the install. What is a 'clean' WinXP media that you start the computer from or is it a Toshiba Recoverymedia? Please describe the procedure a little more detail.

  BR

  Tom

• File setupdd.sys could not be loaded

  My installation of Windows XP Edition family became damaged and would not start.  I inserted the CD original and rebooted.  The PC has started from the CD.  It was not long before I got this error message:

  File setupdd.sys could not be loaded.  The error code is 32 768.

  Is there something I can do?

  You need a Windows XP replacement CD-ROM, looks like your current drive is corrupt.

  How to replace Microsoft software

  http://support.Microsoft.com/kb/326246

• Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

  Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• OfficeJet 6600. Works as a printer, but not able to start the scanner.

  OfficeJet 6600. Works as a printer, but not able to start the scanner.

  I am facing a strange behaviour of my camera. I tried to find similar problems on the forum, but did not succeed.

  I started it 2 days (near my 5610 old which seems to have problems of aging). I use a Sony VAIO PC, OS Win7-Pro, updated.

  Running the appliance following the instructions of the poster. Presents the installation CD. Wireless net was successful and the screen of the device is to give the corresponding IP address.

  But this IP has realized the configuration SW is not recognized. I tried thousands of times, switching and on different devices (router, printer and pc) in the order required, uninstall and reinstall the device.

  However, despite the property intellectual not recognized the device functioning as a "printer".

  But I need to use it as a scanner.

  Procedure by selecting the "scan to PC" screen of the device (only available as an option) I get the message "to ensure that the feature is turned on" and I am prompted to 'open the printer HP SW,... '. ».

  Go to Windows and by clicking on "HP SCAN" in the HP/HP Officejet 6600 directory I get the a warning window stating "HP Officejet unidentified 6600.

  Can someone, please?

  Thank you in advance.

  Hey,.

  Try this document! A "no computer has detected" or "Connection error" message when scanning for HP Officejet 6600 e-all-in-one and 6700 Premium e-All-in-One Printer Series (H711)

  Have a great day!

• Message when you try to print "AcroRD32.exe impossible to locate the"..." "Componet app was not able to start because"DLBAGF. "DLL"

  I am trying to print a document and I get this message "AcroRD32.exe Unable to locate component"... "app was not able to start because"DLBAGF. " DLL' not found... Reinstall the application can solve problem... can you me please help... Thank you

  Moved from feedback

  Original title: my problem is with Microsoft Adobe...

  No problem.

  This link can be a good start for you.

  http://forums.Adobe.com/message/4957379

  Good luck with the resolution of the problem.

• There are some weird named (for example "84d73fa7654467f27e2755eabe", "fe8c141efb76f7d75214f471b67b7c" etc.) empty files in my drives.not able to delete.

  There are some weird named (for example "84d73fa7654467f27e2755eabe", "fe8c141efb76f7d75214f471b67b7c" etc.) empty folders in my records. I did not create these files and I am not able to delete these folders. each such record appears as empty, but each such record contains 11 certain sub folders named-graph, 1028,1031... so now. I am able to open external file with administrator privileges, but not subfolders. I am also able to rename and move files in the same directory, but I'm unable to delete these files. When I try to open the subfolders, it says "u currently do not have permission to access this folder" and when I continue it says "you have refused permission to access this folder." Please tell me how I can delete these folders. I tried to change the security or permissions through properties, but there is no option to change permissions for these folders under the Security tab.

  Hello

  Method 1: I suggest you follow the instructions in the link and check if this may help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-cant-I-delete-a-file-or-folder

  Method 2: You can also try to remove the files in safe mode and check if you can delete:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Note: take the backup of the data before you delete any folder or file if they contain data.

• Not able to start the trial

  I thought I'd give Revel to try, so I just installed the soft of Revel for iPhone on my iPhone4 (running ios 6.1.3).

  I loaded the application; entered by Adobe ID; received a verification email and clicked on the link; entered my date of birth, as requested (why?) and then I get the following error message:

  Not able to start the trial

  There was an error at the start of the free

  trial. Check your network

  connection and try again

  I'm sure it's not a problem with the (WiFi) network connection and I have uninstalled and reinstalled the software and restarted the iPhone for good measure, but I still can not past this.

  Can someone tell me where I'm wrong?

  Thank you!

  Problem solved!

  I connected to the adoberevel.com with my Adobe ID and uploaded a single photo.

  Then I deleted and reinstalled the iPhone application, and this time accepted soft my Adobe ID without problem and displays the photo uploaded. All the features now seem to be working OK.

  I hope this will help someone else with a similar problem!

• Why do I get a message saying "no disc not detected - start insert an and press any key to continue", but none of the keys work.

  When I finished installing, partitioning, and all other actions prompted for installing windows 7 with boot camp, my mac restarted all of a sudden without promote me. My 32 gb SanDisk Cruzer Blade was hooked up to an external USB hub. My screen came up with a console that says something in the sense of ' no disc of starting (or reader) detected - insert and press a key to continue. " I then plugged my FlashDrive directly in the USB interface on my Mac. Then I pushed every button on my keyboard, but nothing happened. I then force reset my Mac and retried, but alas, it didn't work. My computer is stuck here and will not respond to anything else. Any help is appreciated.

  Please, please, please! Someone who doesn't know anything also how stupid it may seem. I can't return to OS x no matter what I try. ;(

• I resized the partition of C: Lenovo IdeaPad Y500 laptop with the partion of aomei assistant and now I'm not able to start.

  Original title: I messed UP WITH MY 8 PREINSTALLED VICTORY AND IT DOES not START NOW

  My lenovo ideapad y500 supplied with windows 8 pre installed. I wanted to set/resize partitions as the laptop has been delivered with a single partition (C :). after I resized with the partion of aomei Wizard something happened and now I don't am not able to start. my laptop has been delivered with the pre-installed operating system, and she had no DVD of win8. I dinot do the recovery disks either. Some say that the product key is injected into the bios) , so I neednt worry about losing the win8 original license. any means now what shud I do to get reinstalled 8 victory! where can I download an image of victory 8 to install?

  LENOVO has this option of key recovery is not working too now that I changed the partitions. (IE it works if the partitions are unchanged)

  Help, please!

  You have an OEM key - make sure that it is the OEM version of win8.

  Lenovo has a drive engineering key which one of its options is to repair the functionality of the button a magical touch.

  Ask in the Lenovo forum if they can direct you to the download of recovery engineering key a repair disk and how to fix your recovery button.

  http://forums.Lenovo.com

  Can you get to a command prompt to start with a system repair disc or the installation or the upgrade disk...

  and taste the repair orders bootrec.exe/fixboot would be a good idea to start with.

• Help and Support was not able to start

  When I open help and Support Windows, it shows me the following error message:

  "Help and Support was not able to start
  For more information, contact your system
  administrator or visit
  http://windowshelp.Microsoft.com.
  
  
  (I'm the system administrator only)
  I am facing this problem for more than a year.
  System details:
  
  
  Windows Vista Edition Home Premium SP2 32-bit
  Internet Explorer version 9

  Hi Aditya,

  This could be caused by the virus or corrupted system files on the computer.

  Follow the following troubleshooting methods:

  Method 1:

  Download Microsoft Safety Scanner, then scan your computer for viruses and malware then check how it works.

  You can download Microsoft Safety Scanner from the link "scan to Microsoft Security.

  Note:  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. All data that are infected must be cleaned only by deleting all of the data, which means that there is a risk of data loss.

  Method 2:

  Run System File Check to fix the corrupted system files and then check how it works.

  See the link "How to use the file system tool Checker to troubleshoot system missing or damaged files on Windows Vista or Windows 7" to run the System File Check.

  Note: It can ask the Windows DVD difficulty and allowing SFC to do more than minor repairs. Could some of the files saved on your computer are deleted when fixing corrupted files.

  If the problem persists, please answer. We would be happy to help you.

• Error message - file inetppui32.dll is not a valid Windows image

  Just started happening after years of use. Each computer xxx.exe file or I try to load I get this error message "xxx.exe - bad Image of the application or DLL C:\WINDOWS\SYSTEM32\intppui32.dll is not a Windows image. valid Please check this against your installation diskette. »
  When I click OK the file loads normally. The problem is that I do that about 50 times when starting. That means "Please check this against your installation diskette"? How this is done? How dooes one to take to solve this problem? Thank you

  Hello

  Please tell us a little more about the system. What is the brand and model of the computer? Do you remember anything specific that past that you think could have triggered these errors?

  In addition, please tell us what you run antivirus software.

  For more information, take a look at this and see the answer marked as the JoseIbarra response.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/error-the-application-or-DLL-is-not-a-valid/fa12c4dc-C175-4399-A0A9-f50aa085c901

  I hope this helps!

• Can't open downloaded files, and I'm not able to view the items in the downloaded files.

  -Very well, every time I download a file can't open it and I view the files it contains. Say I have download a mixtape from a Web site. When it is done and get in my downloads folder, the file type is one of my programs and I can't view the contents of the downloaded file.

  Hi Ryan,

  (a) what web browser do you use?

  (b) have you been able to open this type of file before? You get a specific error message?

  (c) does it happen with every file download or it?

  Please provide the information above to understand the question better; the following steps are worth a try:

  Downloaded file is possibly corrupted. In this case, you will not be able to open it. Download the file again. That might solve the problem.

  Security software may be blocking or impeding the file to open, first of all, let us disable the security software and test

  Step 1: Disable security software, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Step 2: Download the file to a different location (on the desktop) and test

  Step 3: You can uninstall and reinstall the program that opens this file type.

  Note: You can check with the manufacturer of program for ways to reinstall and activate the software.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.