Error TMS agent Portal

Similar Questions

• Error downloading resources portal for JDeveloper

  WebCenter Portal 11.1.1.8

  JDeveloper 11.1.1.7

  I use the "DesignWebCenterSpaces" project and have used successfully for some time. Today when I opened JDev and tried to download a voucher I got an error on the MDS sessions.

  The error reads as follows:

  Error downloading resources portal: error encountered in the creation of the MDS Session. Application state will be reset.

  I tried to download other pageTemplates, but got the same error.

  Help is appreciated!

  Mitch

  I solved the problem by removing the DesignWebCenterSpaces application and create a new one with the same the config.properties file.

• General error for agent Production.

  Hi Experts,
  
  I get "General error" for agent production, although I went from Datasources and also restarted the Production Server.
  
  Even made this yet I get general error for agent production.
  
  Can you please help me solve this problem...
  
  Thank you and best regards,
  Murali.Ch

  Hello

  As mentioned above, if you have a source of data switching, please check if all repositories are pointing to the same data source (tab under Agents).

  If so, it could be because of a different snapshot in the target instance. Go to "/ atg/epub/DeploymentAgent" in the instance (instance of the Production officer) of the target and click the Delete default_cluster_name.

  That might solve the problem.

  Thank you.

• Error TMS in the newspaper of the events endpoint SX20

  Hi, I took the reins of the telepresence for our company and I see some weird messages to the event log on our endpoints SX20. An example is attached, but basically every 30 seconds there is a generated TMS error event:

  4 Feb 13:25:44.181 a8 appl [1614]: ERROR of TMS 2419780.71: http (this = 0x430cb2f0): failed with (Peer certificate cannot be authenticated by the given certificates of AC)
  4 Feb 13:25:44.182 a8 appl [1614]: 2419780.71 provision() I: MSDS: MSDS query FAILED, length 0
  4 Feb 13:26:14.183 a8 appl [1614]: 2419810.71 TMS I: provision(): http request url /https://142.31.193.100/tms/public/external/management

  The entries go back to yesterday, but I'm not sure if that's when the question began or newspapers are simply reversal and removal of previous entries

  There seems to be no problem with endpoints; they can make fine point to point calls and can be booked through the TMS without problem.

  We have done no firmware update (codecs are on the TC7.1.4 firmware version) or of changes in the environment

  That's what worry?

  Thank you

  Brad

  I see your SX20 is trying to verify the TMS server certificate and is unable to verify the certificate.

  The certificate installed on the TMS server is self-signed by TMS, CA internal to your organization or by a third-party certification authority?  For one who has signed the certificate server TMS, their certification authority is added for the SX20?

  If you don't care to check the MSDS server certificate, you can set NetworkServices > HTTPS > VerifyServerCertificate OFF.  However, if you want to check the certificate, you will need to download the certificate of the CA of the organization who signed the certificate for the TMS server.

• Warning in VCS and TMS (inherited from TMS Agent mode)

  Hello.

  I have this massage in TMS and VCS system, how this fix?

  in TMS: #2057 - Configuration Warning - The VCS is running in a mode inherited from the officer of TMS; It is recommended to switch your system to use another mode.

  in VCS: the VCS is running in a mode inherited from the officer of TMS; It is recommended to switch your system to use another mode

  How to switch different mode?

  Thank you

  If you are not Provisioning - remove the key to implementation of the VCS.

  In the web interface, go to the maintenance, options keys, select the configuration key and press delete.

  (it might be helpful to take note of the key first, where you decide in the future that you want to install it again - but it can be retrieved otherwise if you lose, IE from the Cisco Licensing Portal).

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Error TMS of Cisco "unable to connect to the repository user.

  Hello

  Has anyone seen this error before in Cisco TMS? I have not had anything change on my pc or in the environment, I am aware of... I am sailing to the system > Provisioning > users and this is where I get the error and has no user information. I guess that it is not broken, because I had zero complaints that it does not work correctly

  Thank you!!

  Have you checked that TMSPE service is running?

  Can connect to the SQL database of it is?  Use the tools of TMS on the server to check.

  What version of Java, the TMSPE and the MSDS you are running on the server?

• Severity of the error for Agent of LogFilter and rule

  Hello

  When you change the list of messages of LogFilter trap, you get to choose the severity of the error and a Message from the user for the particular match strings:

  

  I already know how to make the message to display in the body of the e-mail message, but how can we get the string the severity of error to be displayed in the subject line?  If I use @foglight_severity_level, it returns 1, which is the level of seriousness for the real LogFilter rule.  If I use @foglight_severity_level_name, this returns fire, which is the name of the level of seriousness for the real LogFilter rule.

  Given the ability to choose the level within the list of messages of Logfilter trap, there must be an easy way to get this as a variable to use in an e-mail subject line?

  Thank you

  Brian

  Hello everyone

  I finally managed to get this working.  I created a new Expression called error using the following code:

  def controls = checkObservationAlarms (#LogFilter_ErrorVerbose to 1ms #,)

  {the entry->

  If (entry.get ("Severity") == "WARNING") {}

  return 2;

  }

  If (entry.get ("Severity") == 'CRITICAL') {}

  return 3;

  }

  If (entry.get ("Severity") == "FATAL") {}

  return 4;

  }

  return 0;

  },

  {entry, severity-> {switch (severity)}

  case 2:

  'WARNING '.

  case 3:

  return "criticism";

  case 4:

  return "Fatal."

  by default:

  Return ' ';

  }}, @foglight_rule_id);

  If (checks.size () > 0) {}

  return checks [0] [1];

  } else {}

  Return ' ';

  }

  .. who I picked up community forums.  I also created an additional call to the UserError Expression that takes the custom error that you provide in the trap of messageliste within the agent that uses the following code:

  def controls = checkObservationAlarms (#LogFilter_ErrorVerbose to 1ms #,)

  {the entry->

  If (entry.get ("Severity") == "WARNING") {}

  return 2;

  }

  If (entry.get ("Severity") == 'CRITICAL') {}

  return 3;

  }

  If (entry.get ("Severity") == "FATAL") {}

  return 4;

  }

  return 0;

  },

  {entry, severity-> {switch (severity)}

  case 2:

  Return entry.get ("User_Message");

  case 3:

  return "" + entry.get ("User_Message") + "";

  case 4:

  return "" + entry.get ("User_Message") + "";

  by default:

  Return ' ';

  }}, @foglight_rule_id);

  If (checks.size () > 0) {}

  return checks [0] [1];

  } else {}

  Return ' ';

  }

  The most attentive of you will notice that case 2 has a different format in the box 4-3 and case in the above.

  Part of the reason for this rule takes so much time programming is that if I made a change to the rule code (for example change WARNING WARNING in the case statement of the first code), Foglight would not record the change and would rather a null value or an empty value.  Weird next workaround often worked: I would like to return to what it was originally, trigger the alarm, change to what it should be, the alarm and continue to do that until the change has been recognized by more.  For the above code, no matter how many times I changed the cases 3 and 4 to resemble the presentation of case 2, I could never make it work

  This behavior has only affected this particular rule; other custom rules that I programmed in the past have been absolutely perfect.

  My matiere2 line becomes:

  @ServerName: @Error: @UserError

  (@ServerName is set elsewhere) which gives a very nice:

  Some.Server.com: caveat: NetWorker backup failure - backup failed

  .. What is exactly what I'm looking for.

  Brian

• Error starting agent

  Hello

  
  

  I installed autonomous agent on the local computer and have trouble from it. Here are the details of the agent.

  Name: stdalone

  Port: 20910

  When executing agent like this D:\Oracle\Middleware\Oracle_ODI_1\oracledi\agent\bin > agent.bat - NAME = stdalone-PORT = 20910, I get following error.

  D:\Oracle\Middleware\Oracle_ODI_1\oracledi\agent\bin > agent.bat - NAME = stdalone-PORT = 20910

  OracleDI: Starting Agent...

  2014-06-30 09:51:07.187 WARNING agent.scheduler.pingAgent.failed

  2014-06-30 09:51:07.192 warning Agent is not accessible. Go to try again after inteval: 30000

  2014-06-30 09:51:38.200 WARNING agent.scheduler.pingAgent.failed

  But it was working fine until last week.

  Any idea how to make to know what is the problem with that?

  The local machine has windows64 bits OS

  Moreover, my ODI_JAVA_HOME in odiparams.bat is defined as ODI_JAVA_HOME = D:\Oracle\Middleware\jdk160_35

  Thanks and greetings

  
  

  Hello

  Following steps hope this can help you

  --> ODI-open Studio-> topology-> Agent

  --> Change the name of the Agent to the IP host

  --> Save changes

  --> Cleanly shut down and restart the Agent.

  Hope this can help you

  Kind regards

  Phanikanth

• 500 server Error during agent cloning cloning Agent Wizard help

  By following the instructions at http://download.oracle.com/docs/cd/E11857_01/install.111/e16847/clone_agent_usng_console.htm#BABEFFHA to clone an agent on a new server, I followed the steps but when I get to step 12 (send this page) I get this error in my browser
  
  Error 500 - Internal server error
  java.lang.NoClassDefFoundError: has not been initialized class oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps
  at oracle.sysman.oii.oiip.oiipg.OiipgEnvironment.getEnv(OiipgEnvironment.java:201)
  at oracle.sysman.oii.oiix.OiixEnvironmentOps.getEnv(OiixEnvironmentOps.java:53)
  at oracle.sysman.prov.agentpush.util.AgentPushUtil.checkLocalTempPathWritability(AgentPushUtil.java:172)
  at oracle.sysman.prov.agentpush.ui.validate.ValidateHelper.performValidationForClone(ValidateHelper.java:2048)
  at oracle.sysman.prov.agentpush.ui.validate.ValidateHelper.performValidation(ValidateHelper.java:2116)
  at oracle.sysman.prov.agentpush.ui.validate.prereq.PrereqCloneValidator.validate(PrereqCloneValidator.java:144)
  at oracle.sysman.prov.agentpush.services.BaseServiceHandler.process(BaseServiceHandler.java:200)
  at oracle.sysman.prov.agentpush.services.BaseServiceHandler.doPost(BaseServiceHandler.java:126)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.sysman.prov.agentpush.services.AgentpushAuthFilter.doFilter(AgentpushAuthFilter.java:122)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:311)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:502)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3592)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
  
  
  How can I fix it?

  Can you used a version of 32-bit JDk and the GC is 64-bit? In this case, I have no good news for you. See note: install push the Agent fails on 11g Grid Control [ID 1186341.1]

  Eric

• Java error when agent deployment...

  Hi all
  
  I try to install oracle 11.1 agent. Already have the configuration (version 11 as well) WHO and all. Agent deployment. I followed the guide... but during the agent installation using the answer file... I get error related to java? I have java installed on the server where my agent is deployed... any help would be appreciated
  
  http://download.Oracle.com/docs/CD/E11857_01/install.111/e16847/install_agent_usng_rsp.htm#CEGGACJE
  

  $ ./runInstaller -silent -responseFile /oracle/OEMAGENT/software/hpunix/response/additional_agent.rsp
  Starting Oracle Universal Installer...
  
  Checking Temp space: must be greater than 150 MB.   Actual 951 MB    Passed
  Checking swap space: must be greater than 150 MB.   Actual 49140 MB    Passed
  Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-05-19_03-12-02PM. Please wait ...$ Error: could not find libjava.so
  Error: could not find Java 2 Runtime Environment.
  
  $
  $
  $
  $ whereis java
  java: /opt/java1.5/bin/java /opt/java6/bin/java /opt/java1.4/bin/java /opt/java1.4/man/man1/java.1
  $
  $
  $ env|grep java
  PATH=/opt/java6/bin:/usr/bin:/usr/ccs/bin:/usr/contrib/bin:/usr/contrib/Q4/bin:/opt/perl/bin:/opt/gvsd/bin:/opt/ipf/bin:/opt/nettladm/bin:/opt/fcms/bin:/opt/wbem/bin:/opt/wbem/sbin:/opt/sas/bin:/opt/graphics/common/bin:/opt/atok/bin:/usr/bin/X11:/usr/contrib/bin/X11:/opt/sec_mgmt/bastille/bin:/opt/caliper/bin:/opt/drd/bin:/opt/dsau/bin:/opt/dsau/sbin:/opt/resmon/bin:/opt/gnome/bin:/opt/perf/bin:/opt/propplus/bin:/usr/contrib/kwdb/bin:/opt/perl_32/bin:/opt/perl_64/bin:/opt/prm/bin:/opt/sfm/bin:/opt/swm/bin:/opt/sec_mgmt/spc/bin:/opt/ssh/bin:/opt/swa/bin:/opt/hpsmh/bin:/opt/langtools/bin:/opt/wlm/bin:/opt/gwlm/bin:/opt/sentinel/bin:/opt/hpnp//bin:/opt/hpnpl//bin:/opt/ignite/bin
  JAVA_HOME=/opt/java6
  $
  $ which java
  /opt/java6/bin/java
  $

  Oracle Universal Installer is normally using its own JRE to its own media. Verify that your Oracle zip files have been correctly uploaded: you can do this with cksum (see page that displays for each download zip file cksum).

• WebLogic Managed Server Error - JavaEE agent test failed in ODI

  Hi all
  Please help the mind the question below!
  Versions: ODI 11.1.1 and Weblogic 11g Release1 10.3.3.
  Server: Windows 2003 server, 32-bit operating system.
  -> able to connect the agent independent successfully.
  
  Question: In Weblogic, the server administrator will connect without error. But when I run the managed server 'odi_server1', we found major error that occur when connecting to the master repository. Stuck under the error log.
  
  Help, please!
  
  # < 23 March 2011 15:58:16 IST > < error > < hats > < admin-3fqjbc1oo > < odi_server1 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > < 1300876096336 > < BEA-149231 > < cannot create the activation state to true for the application "oraclediagent".
  weblogic.application.ModuleException: [HTTP:101216] Servlet: 'AgentServlet' failed by preloading at startup in a Web application: "oraclediagent."
  ODI-1404: OracleDIAgent Agent start failed: an authentication error occurred when connecting to the master repository.
  at oracle.odi.runtime.agent.servlet.AgentServlet.init(AgentServlet.java:233)
  at javax.servlet.GenericServlet.init(GenericServlet.java:241)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletInitAction.run (StubSecurityHelper.java:283)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
  at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
  at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
  to weblogic.servlet.internal.StubLifecycleHelper. < init > (StubLifecycleHelper.java:48)
  at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
  at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1976)
  at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1950)
  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1869)
  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3126)
  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1512)
  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:1267)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)
  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)
  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
  
  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1514)
  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:1267)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)
  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)
  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
  
  Caused by: ODI-1404: Agent OracleDIAgent start failure: an authentication error occurred when connecting to the master repository.
  at oracle.odi.runtime.agent.servlet.AgentServlet.init(AgentServlet.java:233)
  at javax.servlet.GenericServlet.init(GenericServlet.java:241)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletInitAction.run (StubSecurityHelper.java:283)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
  at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
  at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
  to weblogic.servlet.internal.StubLifecycleHelper. < init > (StubLifecycleHelper.java:48)
  at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
  at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1976)
  at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1950)
  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1869)
  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3126)
  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1512)
  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:1267)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)
  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)
  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
  Thank you
  Kenny

  Hi Kenny,

  This error seems to indicate that the credentials that you specified to the master repo do not work. Either ensure that the work of connecting to the pension, or rerun the installation program and specify a set known good powers it.

  Kind regards
  Robb Salzmann

• Disconnect the socket error - registration agent

  Hello dear
  
  I'm topology configuration
  and
  
  record of an agent architecture physically returns the following error
  >
  Unplug the taking of
  <
  
  I don't know how this can be disconnected socket
  
  This is the same address that I used for the configuration of the schema of the physical architecture, which has been a success.
  
  
  light please
  
  Recognizing

  AGENTXX syyy.rtttt.xxxx.com.br, indicated a host and port 1521

  You have to update odiparams. Please use only port no 20910, which is the default port

• Error TMS 403: forbidden

  Hello

  When I click on the logout button, the message above out (Error 403: forbidden)

  What should I do for this?

  In my view, there is a misconfiguration on the authectification parameter. However, I couldn't really no practical solution.

  Help me if you can!

  Thank you

  Best wishes

  Paul.

  Hi Paul,.

  It is a known problem. Have a look here:

  https://Tools.Cisco.com/bugsearch/bug/ CSCuh08527

• TMS Agent Legacy migration

  Hello

  I have to do a migration of legacy TMS mode TMSPE mode, we use a separate SQL Server for the database tmsng and we will use the same location of SQL for the database tmspe.

  Is it necessary to create a database of the emty on SQL server tmspe before migration?

  And how much space should I book on the SQL Server for about 500 users?

  Thank you!

  Henrik Jensen

  Hi Henrik,

  Yes, you need to create an empty database on SQL for TMSPE before migrating. During migration, Setup will automatically migrate the legacy database do OpenDS SQL. You will have to enter the information to connect to SQL Server during the instalation of TSMPE.

  With regard to the size of data abse, I have a TMSPE base with 100 registered users, the size, including data and connects, is only 15 MB. =)

  See:

  

  Concerning

  Paulo Souza

• Error deploying Agent-

  Hi gurus,

  I am new to cloud 12 c control. I just installed 12.1.0.3 cloud control on windows 2008 r2 64-bit computer. I have install repository who on the local computer, and now I will add a 2 node clustor (oracle 11g r2) for monitoring. While adding the host and agent deployment, I get the following message is displayed:

  2013-07-16_10-44 - 26:INFO: Jsch Validation has no problem: SSH server verification failed recommendation: check the value of SSH_PORT in the D:/em/middleware/oms/oui/prov/resources/Paths.properties file. Make sure it is the same as the port on which the sshd is running on the remote host.

  Any ideas? do I need to install any component on the RAC server as well?

  Kind regards

  Guy,

  Thanks a lot for your answer. Could you please let me know

  -J' installed Cygwin on the target host. I'm a bit confused by using the account of what field I need to start the CYGWIN sshd on the target host (I want to say can I use the same domain account that I use to start on the SGD server or can I use any other account as well?)

  Kind regards