Push by MDS Simulator and Win7

Similar Questions

• MDS Simulator and Blackberry Simulator

  Hello

  I'm trying to learn more about the Blackberry architecture. The definition of MDS.

  "The Services of SDM blackBerry are the next generation of the BlackBerry® Mobile Data Service. As part of the BlackBerry® Enterprise Server, they are responsible for managing interactions and applications between smartphones and applications to BlackBerry who are sitting behind a corporate firewall company. »

  It seems that the SDM is needed to communicate with applications behind the firewall. But when I use a simulator, wht I need to perform a MDS Simulator to simply connect to the internet (for example access www.google.com from the browser)

  Comments are welcome

  The BB browser will use a BES connection or BIS. MDS allows a simulation of BES-like environment.

  If your actual program requires a different type of connection, you can skip BES or BIS.

  For the Simulator, you can ignore your form MDS program by asking a direct connection - do you this by adding the parameter '; deviceside = true' to your URL.

• MDS Simulator starts and then closes

  I have installed Java, MDS Simulator and the BBY Simulator on a laptop. Installs it all ran without any errors. I did this for 5 or 6 other people and that you have no problems. On this machine when I go to launch the Simulator MDS the DOS window opens and closes a few seconds, I can't see the messages of. Then when I run the Simulator BBY it opens but when I try to run our application I get a communication error. On other machines the BACK area stays open and the Simulator works very well. I found an article about this type of problem and not the recommended patches and the MDS Simulator still does not work. I checked the logs on this machine and there is NO errors. I uninstalled everything and started around and it still does not work. Has anyone seen this kind of problem before?

  Thank you

  Bill

  Version 4.1.2 MDS - CS Simulator requires JDK version 1.5.  It does not work with version 1.6.

• BBM MDS Simulator problem

  I'm developing an application that needs to send something via BBM surveys, so I wanted to try it. The problem is that I can't get the BBM Simulator to run. I followed the instructions found on the Blackberry Messenger page, but when I run run.bat it says the following:

  Error image

  (why can I post the image directly?)

  -Java SE Development Kit 7 installed: C:\jdk1.7.0\

  -Java JRE installed: C:\jdk1.7.0\jre7\

  (Note that there is another folder of jre: C:\jdk1.7.0\jre\) Variable JAVA_HOME points to: C:\jdk1.7.0\

  Added "C:\jdk1.7.0\bin\;" to the front of the path variable.
  Copied files local_policy.jar and US_export_policy.jar both

  • (1) C:\jdk1.7.0\jre\lib\security; and
  • (2) C:\jdk1.7.0\jre7\lib\security

  (I first copied them only in the C:\jdk1.7.0\jre7\lib\security, but it says "have you installed unlimited strength jurisdiction policy files?")

  I have downloaded the SDK, extract the contents of "C:\BBM\", mounted in the MDS Simulator and extract the content as well.

  Running Windows 7 64 bit.

  What I'm missing here?

  Is the JDK 1.7 32-bit?  I have not tried with 1.7, only 1.6.

• Problem of MDS Simulator (expired)

  I'm working on a project and test on the MDS Simulator, and everything worked well.

  I tried to debug my application and to my surprise, I got the message: java.io.InterruptedIOException of following error: Local connection has expired after ~ 120000

  Here is the result on the MDS screen:

  SCM 4.1.5.26 26 2008/02/06
  <2011-02-07 12:20:16.171 EET>:[0]:::
  <2011-02-07 12:20:18.468 EET>:[1]:::
  <2011-02-07 12:20:18.468 EET>:[2]:::
  <2011-02-07 12:20:18.812 EET>:[3]:::
  <2011-02-07 12:20:18.812 EET>:[4]:::
  <2011-02-07 12:20:18.812 EET>:[5]:::
  <2011-02-07 12:20:18.812 EET>:[6]:::
  <2011-02-07 12:20:18.812 EET>:[7]:::
  <2011-02-07 12:20:18.812 EET>:[8]:::
  <2011-02-07 12:20:18.953 EET>:[9]:::
  <2011-02-07 12:20:18.953 EET>:[10]:::
  <2011-02-07 12:20:18.953 EET>:[11]:::
  <2011-02-07 12:20:18.953 EET>:[13]:::
  <2011-02-07 12:20:18.953 EET>:[12]:::
  <2011-02-07 12:20:18.968 EET>:[14]:::
  <2011-02-07 12:20:18.968 EET>:[15]:::
  <2011-02-07 12:20:18.968 EET>:[16]:::
  <2011-02-07 12:20:18.968 EET>:[17]:::
  Feb 7, 2011 12:20:19 PM org.apache.catalina.startup.Embedded start
  INFO: Starting tomcat server
  <2011-02-07 12:20:19.296 EET>:[18]:::
  <2011-02-07 12:20:19.359 EET>:[19]:::
  <2011-02-07 12:20:19.359 EET>:[20]:::
  <2011-02-07 12:20:19.375 EET>:[21]:::
  <2011-02-07 12:20:19.375 EET>:[22]:::
  <2011-02-07 12:20:19.390 EET>:[23]:::
  <2011-02-07 12:20:19.390 EET>:[24]:::
  <2011-02-07 12:20:19.390 EET>:[25]:::
  <2011-02-07 12:20:19.390 EET>:[26]:::
  <2011-02-07 12:20:19.390 EET>:[27]:::
  <2011-02-07 12:20:19.390 EET>:[28]:::
  <2011-02-07 12:20:19.390 EET>:[29]:::
  <2011-02-07 12:20:19.390 EET>:[30]:::
  <2011-02-07 12:20:19.390 EET>:[31]:::
  <2011-02-07 12:20:19.390 EET>:[32]:::
  <2011-02-07 12:20:19.390 EET>:[33]:::
  <2011-02-07 12:20:19.390 EET>:[34]:::
  <2011-02-07 12:20:19.390 EET>:[35]:::
  <2011-02-07 12:20:19.390 EET>:[36]:::
  <2011-02-07 12:20:19.390 EET>:[38]:::
  <2011-02-07 12:20:19.390 EET>:[37]:::
  <2011-02-07 12:20:19.390 EET>:[39]:::
  <2011-02-07 12:20:19.406 EET>:[40]:::
  <2011-02-07 12:20:19.406 EET>:[41]:::
  Feb 7, 2011 12:20:19 PM org.apache.catalina.core.StandardEngine start
  INFO: Starting Servlet Engine: Apache Tomcat/5.5.23
  Feb 7, 2011 12:20:19 PM org.apache.catalina.core.StandardHost start
  INFO: XML validation disabled
  Feb 7, 2011 12:20:19 PM org.apache.catalina.startup.ContextConfig defaultWebConf
  ig
  INFO: No default web.xml
  Feb 7, 2011 12:20:19 PM org.apache.catalina.core.ApplicationContext log
  INFO: AdministrationController (Status):init
  Feb 7, 2011 12:20:19 PM org.apache.catalina.core.ApplicationContext log
  INFO: C:\Eclipse\plugins\net.rim.ejde.componentpack6.0.0_6.0.0.30\components\MDS
  
  Feb 7, 2011 12:20:19 PM org.apache.catalina.core.ApplicationContext log
  INFO: AdministrationController (Statistics):init
  Feb 7, 2011 12:20:19 PM org.apache.catalina.core.ApplicationContext log
  INFO: C:\Eclipse\plugins\net.rim.ejde.componentpack6.0.0_6.0.0.30\components\MDS
  
  Feb 7, 2011 12:20:19 PM org.apache.coyote.http11.Http11BaseProtocol init
  INFO: Initializing Coyote HTTP/1.1 on http-8080
  Feb 7, 2011 12:20:19 PM org.apache.coyote.http11.Http11BaseProtocol start
  INFO: Starting Coyote HTTP/1.1 on http-8080
  <2011-02-07 12:20:19.968 EET>:[42]:::
  <2011-02-07 12:20:25.812 EET>:[43]:::
  <2011-02-07 12:20:25.812 EET>:[44]:::
  <2011-02-07 12:20:25.812 EET>:[45]:::
  <2011-02-07 12:20:25.812 EET>:[46]:::
  <2011-02-07 12:20:25.812 EET>:[47]:::
  <2011-02-07 12:25:25.812 EET>:[48]:::
  <2011-02-07 12:25:25.812 EET>:[49]:::
  <2011-02-07 12:25:25.812 EET>:[50]:::
  <2011-02-07 12:25:45.796 EET>:[51]:::
  <2011-02-07 12:25:45.812 EET>:[52]:::
  

  I tried to uninstall the java plug-in of blackberry for Eclipse 1.3.0 but it did not help

  Can anyone advice

  Have you tried with '; '. deviceside = true' added at the end of your URL?

• Limitations of MDS Simulator

  
  

  I'll answer myself. :-)

  I was not able to determine if there was a setting for the maximum Simulator MDS to increase the number of bytes per connection.  However, a satisfactory solution was to bypass the MDS Simulator and use direct TCP:

          if ( DeviceInfo.isSimulator() )            // add this to your connection ";deviceside=true;ConnectionTimeout=15000"
  

  See you soon.

• Email and Services of MDS Simulator does not not on Windows 7

  Email and Services of MDS Simulator does not not on Windows 7

  Finally, resolved. There is no need to edit the file of commands or anything else. Everything you need to install Email and MDS Services Simulator and simulator of Smartphone in C:\Research In Motion instead of C:\Program Research In Motion.

  Best regards

• Can't push to the physical device but can push to the Simulator

  Anyone know why I can't push my real BlackBerry but I can push to the Simulator?  I'm just accessing this site on my test pc and pointing to our production server BES.

  http://BES_Server:17080 / push? DESTINATION = MyPin & PORT = 7874 & REQUESTURI = localhost

  I can't transfer blue in the upper right arrows on my device when I send the push. but my application it never receives.  What I put in REQUESTURI how?  If so, what it should be and where I put it in my application?  When I use the MDS assessment locally with the Simulator server, it works fine and sends push them to my fine application of the suggestions would be great!

  I had the reliable port wrong number.  It doesn't seem to matter what I put that in the Simulator, but in the real device it Mater.

• 8320 running Simulator 4.2.2.161 will not connect to the 4.1.4 MDS Simulator

  HI -.

  I just installed the 4.2.2.161 Simulator device 8320 and can't seem to connect to the network via the browser.  I run the 4.1.4 MDS Simulator.  I have several other simulators installed, and they can all connect fine when I run it.  When I'm trying to here, it is there for awhil, and then it times out with the message "unable to connect to the selected Mobile Data Service. Please try again later. If the problem persists please contact your administrator. »

  I noticed a strange thing is that I do not see the "arrows" flashing at the top right of the screen of the simulated device, and I see no record appears in the MDS Simulator window.

  Please notify.

  Thank you

  Mike

  Managed to get the 4.2.2.161 Simulator (8320) working on the PC with MDS 4.1.4.  The only thing I did was shut down, install the 4.2.2.163 Simulator (8310), try it (it worked), and then re-run the 4.2.2.161 Simulator (8320).  It just started working.  (If all goes well, it blocks everything works again.)

  It does not always work on another PC with MDS 4.1.0 but I guess it's just a matter of MDS version.

  Mike

• Cannot run the MDS Simulator

  I'm testing the demo of HTTP... everything is workin fine but it return an error after tried to connect for awhile (workin...) "java.io.InterruptedIOException: connection Local expired after 120000.

  The problem seems to be that the Services of MDS Simulator is not launched... but when I try to run it manually, the window opens and close immediately after. I've tried many 'solutions' on this forum, but nothing seems to work.

  Thank you!

  I have it!

  Necessary to reinstall the plugin eclipse even though I use JDE... then restarted, adjust the path environment variable, started again and needed to start the mds alone before opening the JDE.

  Now, it works fine.

  Thank you!

• Simulator and by redeploying App

  Hi all

  I "works with the latest Eclipse-JDE plugin. When I use the "Run As" command... "to push an application to a work of things fine Simulator, but if I make a change to the app and try again the 'Run As... '. "even when the app is not refreshed on the Simulator. If I stop the Simulator and then repeat the 'Run As... '. "then the app is updated.

  Is there a way to update the application on the Simulator without having to constantly restart the Simulator?

  I use the API set 4.6 with "BOLD" 9000 Simulator. I am running the latest plugin with Version: 3.4.1 Build id: M20080911-1700

  Beren

  You see the expected behavior.  The BlackBerry Simulator must be restarted when you test a new version of a Java application.

• MDS Simulator "do not have access to.

  I am trying to build a simple Midlet based soap client. I'm using kSOAP2

  I use:

  Blackberry Simulator 9000 - 4.6.0.150

  JDE 4.7.0.41

  4.1.2 MDS Simulator

  Web service based on kSOAP2 (best docs and depolyment simpler)

  I am able to browse the web inside the Simulator, but when I try to connect to my web service deployed locally (http://127.0.0.1: 8061/MobileSOAP/service), I can't seem to connect. The MDS Simulator complains:

  <2009-09-21 10:38:48.526 EDT>:[264]:::
  

  I'm guessing this has something to do with the site, signatures and other things security, as

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=BlackBerryEnterpriseSolution&message...

  but this link guess I have a BlackBerry Enterprise serve, and I hope that I don't have to deploy just to get a soap client working.

  How can I get the MDS Simulator to allow localhost requests?

  I'll have more problems when I deploy to interact with our web production servers?

  Thank you

  PS

  In case you think that my service is down, I have an Oracle installation on my machine that has its own web service (http://127.0.0.1: 8080/apex /), and I use firefox to load the page and perform administrative tasks. But I can't use the BB Simulator even browser load the page. Yet once again, the MDS complains:

  <2009-09-21 11:13:30.510 EDT>:[371]:::
  

  In case you worry, my demand was showing

  org.kxml.io.ParseException: unexpected: ParseEvent type=128 text="Not authorized to access 127.0.0.1:8061' @-1:-1
  

  I spent an hour in the examination of the documents and forming my question only to find out the address IP is false, ONCE I confirmed the issue!

  I could have used my public IP not localhost or 127.0.0.1

• 9630 Simulator NOT work with MDS Simulator!

  Hi all

  I use the Tower Simulator (BlackBerry_Simulators_4.7.1.40_9630_Verizon) with the MDS Simulator (BlackBerry_Email_MDS_4.1.4) but I can't connect my browser to the internet at all.

  What can be the problem?

  Thanks in advance

  Edit: Follow-up "understandable" simon's note.

  There is a workaround to use a newer version than the official facilities files: use the Simulator MDS of the JDE or Eclipse installation and copy them to any machine he needs.

  The final answer seems to be not related to the MDS version. In the BB Simulator, please make sure that the network is the "1xev".

  Then it works fine.

  HTH

• BB Tower Simulator does not connect to internet through MDS Simulator

  Hello

  I looked at some similar threads for a similar problem, but the solution doesn't seem to work for BB tour Simulator that I am using.

  I downloaded and installed the following

  BlackBerry_Simulators_4.7.1.40_9630_Verizon.exe

  and

  BlackBerry_Email_MDS_4.1.2.17.exe

  I start the MDS Server and then the Simulator.

  The SDM startup shows all errors in the console.

  The Simulator also starts well and shows that I'm on a simulated Fledge "network with GPRS.

  When I try to go to an external site like "Google.com", through the browser, an error message appears that says "Unable to connect to the selected mobile data service"

  What Miss me? Should I change some parameters of the it strategy?

  The pointers will be greatly appreciated.

  I've uninstalled and reinstalled everything properly and things worked well... My apologies for the noise.

• MDS Simulator not launch

  Hello

  I have a problem with the simulator of MDS - CS coming with the installation of Blackberry JDE 4.5.0. I have to establish connectivity network & t orun MDS for this need.

  Whenever I run the MDS Simulator application, a window appears and immediately leaves.

  How to solve this problem?

  I searched the Internet for thisissue & answers have been most associated with the PATH environment variable. I checked for the correct path variable but its still does not. I reinstalled JDE but still no solution.

  My way home of Java is,

  C:\Program Files\Java\jdk1.6.0_13
  

  -What is important if I don't add the JAVA_HOME environment variable? as I read that Java_HOME is not required for Blackberry JDE.

  All the solutions for this problem?

  Thanks in advance

  See this article.

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800792/801079/support...