Error tracking in ID CC2014

Similar Questions

• How to fix 01700213 error, track 440, head 70, B105 return code = 0 x 0011

  Slow computer operation.  Performed a full scan and this error keeps coming up error of hard disk 1 01700213.

  Track 440, head 70, B105 return code 0 x 0011

  You must run CHKDSK and tell him to check and try to repair the bad sectors.  Click Start-> computer, then click on the C: drive and click Properties.  Click on the Tools tab, and then click Find now.

  I hope this helps.  Good luck.

• Error 16 for Photoshop CC2014 and Lightroom

  MacBook Pro, OS 10.9.4

  When I try to launch CC2014 Photoshop or Lightroom 5 I get an alert with "error 16" and the bulletin tech who shows how to change the permissions for both files.

  (1) I changed the permissions as stated in the bulletin of Adobe several times with the same result.

  2) I created a new user, completely uninstalled CC again and used the CC Cleaner. After the reboot, I reinstalled CC and applications downloaded successfully and got the same message "error 16".

  3) I checked the permissions and they are exactly what Adobe specified.

  (4) I ran DiskUtility to repair permissions and checked the records yet - they always had reason.

  (5) without success.

  Has anyone else dealt with and solved this?

  Solved! It worked for me (MacBook Pro, 10.9.4) I gave ALL the permissions in the folder Adobe full in/Library/Application Support /-not just the PDC and store files. Solution is credited with Adobe technology I read in another thread.

• Photosmart HP 6520: Ink alerts for error tracking and hpstatubl.dll

  Toshiba laptop.

  Windows 7 64 bit home edition.

  All-in-one printer, HP Photosmart 6520 - connected via a Belkin router WiFi range.

  I get the error alert "HPStatusBL.dll" not found

  My research indicates that the problem is that the software of the ink of the State monitoring reports has been removed, but has left this link dll with no module to run if an error is reported.

  I don't want to remove the source of the error, I want to restore the State of ink to the laptop.

  My laptop reported my printers ink status, but apparently, this program module has been removed. ! ? ! ? !

  How can I reinstall the software that should be followed the printer to displaay on the laptop?

  (I can't find the disk I got with the printer. If that is where it is)

  Best thing to do is to completely delete all HP software and remove the printer to reinstall.

  Use http://www.iobit.com/en/advanceduninstaller.php and use a powerful scanner at the end and remove all registry entries.

  After that, reinstall your printer by installing the drivers and full software here.

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-6520-e-all-in-one-printer-series/5169038/model/5169040

• When ripping CD's first track is ok the rest to find as error. CD is brand new

  Ripping starts, comes to 10% then says error for all other tracks.
  Download
  Track 1 tear... 10%
  2 track error
  Track error 3
  Track error 4

  Hello

  ·         Which application you are using to rip the CD?

  I suggest you to refer to this article and check if it helps:

  Solve problems in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  See also:

  Rip music: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/rip-music-frequently-asked-questions

   

  Change settings for ripping

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-ripping-music

• When open TASfirstbooks this error message: error running-2146234304 (80131040)

  When you try to open TASfirstbooks this error message: error running-2146234304 (80131040) Automation error tracking. How can I overcome this? I recently uninstalled the program and reinstalled it. This does not remove the data files. Help please.

  Here are the system requirements for BUNCH FirstBooks

  The system configuration required

  • Microsoft Windows XP SP3, Windows Vista SP1 or Windows 7
  • Microsoft. NETv3.5 SP1
  • Microsoft Internet Explorer v7 or higher
  • Adobe Acrobat Reader v7 or higher
  • Adobe Flash Player v9 or higher

  Error -2146234304 (0 x 80131040) usually means FUSION_E_REF_DEF_MISMATCH.

  Please make sure you have Microsoft. Installed SP1 NETv3.5. It is installed by default on Windows 7 computers. Otherwise, you can download and install from the following URL:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=ab99342f-5d1a-413D-8319-81da479ab0d7

  Please ensure that you have the latest service packs, Microsoft Windows and the installed updates, including those for the .NET framework.

  If this does not help, then I suggest that you contact that software BUNCH of support for their product.
  http://support.tassoftware.co.uk/support/home.aspx?TID=258249&STid=302990&PID=

  Thank you

  Marilyn

• Any solution to this error? «Error: 16»

  When I try to run photoshop cs6, it shows a dialog box saying "error: 16?

  See here:

  Error 16 for Photoshop CC2014 and Lightroom

• After effects error: try to get the value of a stream of time without key values

  Hi gang! Does anyone had this error on after effects CC2014. Installed software updates from red giant and the movie convert updates and now, after the effects themselves will not relax this error and the function. Help!

  Hey Rick! Just having the time Aha...

  After clearing the 150 GB of disk space, uninstall and reinstall, allocating cache, etc. it seems to be the latest version of the movie convert Pro. I uninstalled and reached out to the crew at the monkey rubber.

  Thank you for your help. Dodo...

• Satellite X 200-219 hang up the wake from sleep

  I got my satellite X 200-219 since April and he always showed the following behaviors but lately seems to have worsened.

  If I do nothing else that to stop completely the laptop after using it, the next time that I start it, it crashes some short but apparently random time after.

  I've never managed to imperically my theory, but it seems that there is a point of the catchment area about 15 minutes after what will be the shot, if I close the lid let sleep and then reopen it will probably be authorized, if however I turned off and make a cup of tea and open my back it is likely to crash. A power cycle and restart with the prompt "unexpected shutdown" was then held after the machine will be perfectly happy.

  I tried to use performance and error tracking tools to identify what is happening but to point out, nothing is connected, and I think that all who had not been emptied to disk is lost. I got it down before the opening of the session/finger drag but also I got most of the way by the, horribly slow, the boot process.

  I tried a number of other things, the upgrade to the graphics drivers, bios etc disbaling Aero, and all sorts of other features all without success.

  I am now at a loss as to what I can do next and don't really have any new ideas as to what may be the issue.

  Anyone got tips? Someone at - he seen this before?

  concerning
  Neil

  Hello

  I m no owner of an X 200 Satellite but I noticed hibernation/sleep problems on my laptop Vista too.
  For example my screen remained empty after waking from hibernation.
  I could solve it by the BIOS and update the graphics driver.

  Other problems have been resolved after installing some patches and Vista SP1.

  You never recover your laptop computer with the Toshiba Recovery CD and checked whether the hibernation issue has not changed?
  The fact is that a lot of problems is related to a BONE of garbage and the registry. It occurs due to mounting and dismounting 3 different third-party software.

  I always use a free tool of CCLeaner. It cleans my OS and fix if necessary registry entries.

  Unfortunately, I can't post an exact solution but perhaps tips could help you.

• Measured values of task not aggreeing with the measurements of the test Panel

  We read (with excitement) accelerometers using modules PXI-6254. Initially, we thought that we were see shift CC and we were and we filtered. Now, if we measure the sensor output at rest with an O'scope we read uV. For even if we read the channels with MAX test panels we also read some uV. But when we do the DAQmx tasks and look at the tensions of the task to MAX (same sensors at rest), we see readings of up to 25 or 30 mV - orders of magnitude higher. Can anyone suggest what may be the cause?

  (I enclose a word with screenshots represetative doc)

  Thank you

  lmd2

  How many channels are tailor-made and at what rate?  What is the output impedance of the accelerometer or filters, you have between the accelerometers and the 6254?

  It is possible that you run into error when paying.  The specifications for the PXI-625 x cards has a chart showing the expected setting vs error track-to-track interval various sources.

  A way to test this would be to slow down your sampling rate.  If the error decreases as you slow down the sampling frequency, it's a good bet that you run into a problem of setup time.

  Mark Moss

  Electrical Validation engineer
  GHSP

• New Dell Inspiron less than a year... DVD RW Optiarc AD-7560 s problems

  I start having reading problems after almost 2 months of purchase, I was on a trip abroad. I figured out, I need a DVD/CD cleaner but could not find one so stop using the device until I receive a product cleaning.

  In the meantime, I did a checkup before and after that showed an error with the blue beam if I remember correctly. When at home got the CD/cleaner and run several times there worked, used a second vacuum older that worked well as well first cleaner was an audio CD 5 titles trac 1 was well without error track 2 was from difficulty taking more time as if the unit is to try again and again to read and then 3 to 5 would go fast or sometimes that he was jumping to Track5 immediately indicating the cleaning process was done with success! The other cleaner was a DVD cleaner and would conduct a review on the quality sound and photo quality, the two went like a breeze, crushed the diagnostic pre-post that reported errors with DVD and no errors, also downloaded all updates recommended and installed, including a ROXIO creator who worked well and revealed details of the DVD I had reading problems of their.

  Now I run the backup vista, as recommended by Dell and Microsoft it detected the need to back up my files for 3 DVD blank started the 1st DVD backup, no problem, the second time and had to re-run it invited to the 3rd DVD and this FAILURE as all of a sudden you have a windows error [ROXIO burner stopped working] is looking for a solution and the solution never found!

  Since DVD so can not read or write, he keeps trying for ever, and some message [ROXIO...] shows I repair and uninstalled all Roxio update but still problems, suggestions?

  PS You forgot to do you know system runs under Vista SP2

  Thank you

  Hello

  You have had problems because the machine had 2 months and you have not done anything. Thank you you were on a trip abroad but, seriously, I would have been at Dell like a Cannonball. If the postdated cleaner shows a blue beam error then it is possible that the laser is not aligned and nothing you can do to fix this. DVD RW must look professional and that your machine is still under warranty then I would contact Dell.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com

• Simple JavaScript to set the date

  Hello

  My simple JavaScript to fix the date runs in Acrobat Pro, but when I open the same document the reader he sets the date, but it fails with a pop off getField error dialog box... Here's the error tracking script...

  function populate_date()

  {

  var f = this.getField ("ToDay_Date");

  If (! f.value) f.value = util.printd ("d/m/yyyy", new Date());

  }

  populate_date(); call my function

  Above scripts executed when the document is opened. As a Pro, it is stored under Tools/JavaScripts/Document JavaScript...

  When I open it in the drive then I get the following while he dates the date presented too!

  The built-in functions of EScript Acrobat Version 11.0
  Acrobat SOAP 11.0

  TypeError: this.getField is not a function
  2:folder - level: App:Search Script.js

  I have not put right that I get this error...

  Kind regards

  Jeff P.

  I don't understand what you're talking about... The error message made clear reference to a script of level of the folder called 'search Script.js'.

  You must look for the source of the problem here.

• SQLState HY000 that no request has been performed with this handle

  Hello everyone. I tried to get a working between 11.2 Oracle & PostgreSQL DBLINK. We had a plethora of errors... However, rather than try to explain I will simply display all errors, track & all my settings. All so first of all, here is a quick paste of the error I get.
  I had to cut part of the path for the length. But it repeats a bit
  Thanks in advance for any help.
  
  This is the error we get Oracle Developer program
  
  SQL > /.
  Select * from ods_md__product@denodo_dblink
  *
  ERROR on line 1:
  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:
  No query has been executed with this handle {HY000, NativeErr = 1} no request has
  been executed with this handle {HY000, NativeErr = 1}
  ORA-02063: preceding 2 lines of DENODO_DBLINK
  
  And this is a rough idea of which comes from the trace.
  
  Entry hgopoer to 16/12 / 07/2012: 12:35
  hgopoer, line 231: had native error 1 and sqlstate HY000; message follows...
  No query has been executed with this handle {HY000, NativeErr = 1} no query has been executed with this handle {HY000, NativeErr = 1}
  Out of hgopoer, rc = 0 to 16/12 / 07/2012: 12:35
  hgopars, line 526: calling SQLNumResultCols obtained sqlstate HY000
  Out of hgopars, rc = 28500 to 16/12 / 07/2012: 12:35 with the ptr error FILE: hgopars.c LINE: 556 FUNCTION: hgopars() ID: preprocess the number of columns
  hostmstr: 0: HOA after hoxpars
  hostmstr: 0: CPP after SQL grouping
  
  
  
  I use Oracle for heterogeneous environments 11.2 on RHEL 5.4
  Connection to Denodo on Windows that use PostgreSQL drivers
  unixODBC 2.2.12
  psqlODBC drivers 08.04.0200
  
  
  ODBC.ini
  
  
  [VDP_acme_DSN]
  Description = connection VDP
  Driver = postgreSQLDriver
  Trace = no
  Trace file = /tmp/trace.log
  Debug = no
  DebugFile = /tmp/debug.log
  Database = aaa_ncnu
  ServerName = *. *. *. *
  User name = admin
  Password = admin
  Port = 9996
  Protocol = 7.4
  ReadOnly = No
  RowVersioning = No
  ShowSystemTables = No
  ShowOidColumn = No
  FakeOidIndex = No
  LFConversion = Yes
  UpdatableCursors = Yes
  BoolsAsChar = Yes
  UniqueIndex = Yes
  ServerType = Postgres
  ConnSettings =
  UseServerSidePrepare = 0
  ByteaAsLongVarBinary = 1
  Optimizer = 0
  Ksqo = 0
  
  [ODBC]
  TraceFile=/tmp/sql.log
  Trace = 1
  
  odbcinst.ini
  [postgreSQLDriver]
  Description = driver PostgreSQL 08.04.0200
  Driver = /usr/local/lib/psqlodbcw.so
  UsageCount = 1
  
  
  initVDP_acme_DSN.ora
  HS_FDS_CONNECT_INFO = VDP_acme_DSN
  HS_FDS_TRACE_LEVEL = DEBUG
  #HS_FDS_TRACE_LEVEL = 255
  HS_FDS_SHAREABLE_NAME = /usr/local/lib/libodbc.so
  HS_LANGUAGE = american_america.we8mswin1252
  
  #
  # ODBC specific environment variables
  #
  Set ODBCINI=/usr/local/etc/odbc.ini
  
  
  tnsnames.ora
  ETLD =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = ETLD)
  )
  )
  
  VDP_acme_DSN =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = Localhost)(PORT = 1527))
  (CONNECT_DATA =
  (SERVICE_NAME = VDP_acme_DSN)
  )
  (HS = OK)
  )
  
  listener.ora * bold * "BOLD"
  
  
  
  LISTENER_TG =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = PNPKEY))
  (ADDRESS = (PROTOCOL = tcp (PORT = 1527))(HOST=localhost))
  )
  SID_LIST_LISTENER_TG =
  
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = VDP_acme_DSN)
  (ORACLE_HOME = / app/oracle/product/11.2/tghome_1)
  
  (ENV="LD_LIBRARY_PATH=/usr/local/lib:/app/oracle/product/11.2/tghome_1/lib')
  (Program = dg4odbc))
  )
  
  
  I've posted a copy of my oracle on pastebin trace cause of length
  
  http://pastebin.com/2qbgJL03
  
  Even with my ODBC trace
  
  http://pastebin.com/2FU9nRCS

  The odbc trace that shows:
  [ODBC] [6347] [SQLPrepare.c] [192]
  Entry:
  Statement = 0xde51420
  SQL = [SELECT A1. "" prd_cd ", A1. "" prd_dsc ", A1. "" ld_dt ", A1. "" updt_dt ", A1. "" prd_ln_dsc ", A1. "" prd_ln_cd ", A1. "" ln_bus_cd ", A1. "" ln_bus_dsc ", A1. ["co_num...] [length = 201]
  [ODBC] [6347] [SQLPrepare.c] [367]
  Output: [SQL_SUCCESS]
  [ODBC] [6347] [SQLNumResultCols.c] [149]
  Entry:
  Statement = 0xde51420
  Number of columns = 0xde16fa8
  [ODBC] [6347] [SQLNumResultCols.c] [234]
  Output: [SQL_ERROR]
  Count = 0xde16fa8-> 0
  DIAG [HY000] no query has been executed with this handle

  =>, it seems that the Postgres ODBC driver you are using has a few problems with the SQLNumResultCols function. Your current version of the ODBC driver is psqlodbcw.so, DriverVer:08.04.0200, and there are new drivers available. Can you please get the latest ODBC driver and check again?

• Add THAT SWC explodes from Flex Builder 2.01

  With Flex Builder 2.01 running like an Eclipse 3.2.2 plugin, that I'm trying to load CFCS a product by "Making Flex Builder" in Flash CS3. Eclipse error track below. I see essentially the same tracking in JIRA, implying that the EFA is possibly wrong, but I don't see any errors when publishing in Flash CS3.
  
  Anyone has any ideas on this?
  
  Is there only one kind of stand alone CFC auditor/truck autour I could use to investigate the CFC? I tried abcdump on it, but it says 'unknown format 67324752.
  
  In the meantime, I guess I'll try Flex Builder 3...

  Well, I've upgraded to Flex Builder 3 as an Eclipse plugin 3.3.2, and the problem disappeared.

• Don't get the names of the tracks - No Error Message

  Hello

  I have a problem that happens with all CD when I try to import, no track, the name appears and when I choose to get names follow No error message is given, this used to work but stopped after the recent updates.

  What is strange, is that when I go to Itunes using a different windows user account on the same lap top name of CD track info are recovered.

  So it was seems that something went wrong with my Itunes software on the way, I tried an install Itunes then re install but the same problems persists, I have not tried removing all Itunes related files before re install because I don't want to lose my playlists and metadata.

  Advice to solve this problem would be appreciated.

  Del

  Post edited by: Delbot73

  When you sign in with the account you want to use, make sure that in the Preferences - general - there is a check mark in the last selection - automatically retrieve the names of the CD tracks on the internet. Hope this helps