PowerSupply

Similar Questions

• Workstation HP z210 powersupply problem

  Hello everyone

  I recently bought a new card a R9 Sapphire graphics 270 x for my HP workstation z210 and also a new 900 Watt powersupply, the problem is powersupply dusnt seem to work with that pc and it is not vice, it works on all other computers except this one. I red somewhere it had to do with compatibility issues sinds it was a workstation, im distraught and I really want to use this video card, someone has a solution for the problem of power supply? Thank you in advance.

  You can get assistance on the HP Enterprise Business Forum.

• Powersupply failed, is it replaceable?

  Power supply has failed, it is replaceable by myself, or what to do in a repair center?

  It is not very easy. What model do you have? On a 2012 model, it would look like this: https://www.ifixit.com/Guide/Mac+Mini+Late+2012+Power+Supply+Replacement/11722

• Powersupply upgrade for a WG to 730 to work in my eMachines el1352g-41W

  This work on the motherboard in a larger ATX case emachines el1352g-41w?

  http://m.eBay.com/ITM/450Watt-450W-...l-AMD-desktop-PC-PSU-/131030129712?NAV=search

  It is generally a bad idea to buy cheap real food like this (without brand/generic).  Too risky.

  This is a very good standard of ATX power supply that will work.

  http://www.superbiiz.com/detail.php?p=PS-SSR360G&c=FR&hash=094bb114782bb681b39994d75108cb03d5d12e0bf...

  If you spend that much, then at least look at this one...

  http://www.Amazon.com/EVGA-continuous-warranty-supply-100-W1-0500-KR/DP/B00H33SFJU/ref=sr_1_4?s=Elec...

• Map chart and PowerSupply Upgrade Plus a few questions

  Before you begin, my PC is HP Pavilion p7-1167 c desktop PC.

  I was planning on upgrading my graphics card to a MSI GeForce GTX 760 2 GB Twin Frozr Gaming OC graphics card.

  And either a Corsair CMPSU-600CXV2 600W PSU or a Corsair HX650 650 Watt power supply.

  in any case, on the issues.

  (1) these are compatible with my PC?

  (2) the graphics card will fit in my case?

  (3) this will void my warranty?

  Thank you.

  (1) number and YES... Your computer has a slot of PCIe x 16 v2.0 and the card you have chosen is v3.0 PCIe x 16. This can be retro-compatible. The Corsair CX600 will fit in the case, but you can opt for the CX600M. The CX600M is modular and will help in the management of cables and better air circulation.

  (2) the 760 GTX is a beast, and you may need to get a smaller (shorter map). Open the box and measure along the crack of PCIe x 16 from the back of the housing to the front until you reach an obstruction.  Just below that is the longest card desired.

  (3) No, unless your computer is damaged by installing these accessories.

  Please send BRAVO

• TI Will GeForce GTX 750 FTW 2 GB PCI-E w / ACX cooling works on Μatx-H61-Joshua (Joshua)

  Hello.

  I want to buy

  GeForce GTX 750 Ti FTW 2GB PCI-E w / ACX cooling and I don't know if I can connect to my motherboard: Μatx-H61-Joshua (Joshua)

  and I think through my Powersupply 650Watts and I don't know if its power to put the power supply on the top side the case.

  PC model:

  500 - 009c

  Power supply:

  MrGamer101, welcome to the forum.

  Here's the model manufactured by EVGA.  Look in the 'Détails' tab for complete specifications.  It says that the card is 9 "long.    I suggest to make a model of the size of the map to see if she will enter the space with a good air circulation.  When playing or doing intensive video tasks much heat is developed.  It's a PCI Express 3.0 x 16 and the slot in the motherboard PCI Express 2.0 x 16.  The 3.0 is backward compatible.  If it can be properly inserted into the space, it should work without any problems.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Satellite A500-19N - Wlan switch between on and OFF in battery mode

  Hallo,

  I bought a new A500-19N Satellite three days ago and one have the problem,
  When I used the laptop battery, the wlan switch mode between connect and disconnect.
  With powersupplier, I have no problem.

  All energy wlan settings I adjusted to full performance and now I have now idea how can I solve the problem.
  Do you have any ideas or advice?

  Thank you very much
  Nico

  Hello

  You must verify power WLan settings in Win 7 power management and need to disable the power save for WLan in battery mode

  I found a great HowTo but for Vista OS.
  But the settings are not really different.

  Check this box:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=41

  Welcome them

• Satellite 5200 701: which cable should I connect to PJ2 port on motherboard

  Hello world.

  Currently, I am trying to fix a laptop Satellite 5200 701. The keyboard and touchpad are both dead but see the place in the Device Manager.

  When I opened the folder, I found the motherboard has an empty on port marked PJ2.
  When I looked in to it that I discovered that this is a port to connect a cable that feeds power to the keyboard, so I think that's the problem.

  My problem is trying to find out what wire should be connected to it and what another port.

  If someone could help, I would be grateful.
  Thank you very much.

  Hello

  How can you come to the idea that the keyboard needs some extra internal powersupply? The keyboard has only one connector that is important, and this is the connector of the KEYBOARD. Only this and nothing else.
  If there is an empty port then it has nothing to do an extra wire must be connected or whatever.

  Another thing: If the keyboard and touchpad appear in Device Manager then why they do not work? Didn t you think a software framework could be the problem? Please try another operating system, a linux live CD might be a good choice to make sure that the keyboard and the touchpad are really not work.

  Simply reconnect the keyboard and then try a linux live CD (knoppix would be a good choice, but you can also try ubuntu) to check if it work s.

  Welcome them

• e9180f fires on ARC fault breakers

  My new office of e9180f (POS) causes my AFCI rooms to fire every other time it is started.  I tried the following to work around the problem, but nothing seems to solve the problem:

  1 start the computer from GFCI protected outlets - doesn't do not have problems with any protected circuit breaker out trigger.  Not a reasonable solution since I need the computer in the room, it is currently configured.

  2. start the other AFCI protected taken computer - triggered AFCI breaker second leading me to think that there is a problem with the computer.

  3. start the computer from the inverter - makes absolutely no difference... Thank you HP support for telling me to spend $150 on a piece of hardware that I didn't need.

  Through my UPS (that does not need) I know that my computer takes a 250W maximum.  Since my computer now runs on a perfectly conditioned 120V, I can easily say that my point 2 (any) amp draw comes far close overloading the AFCI 15 amp breakers.

  My questions: what other troubleshooting steps should I take?  Is it likely that my computer is causeing a failure of the bow that fires the AFCI that prevents my house burning (i.e. What on ARC fault breakers are designed to prevent)? Are there opportunities that the HP support will recognize that their company might sell defective products and they need to be more tolerant to angry customers like me ask a little question help?

  Thank you

  Teal'c

  SOLVED.

  I replaced power supply Delta HP installed in my brand-new HPE-180 t with a Corsair TDX650W memory and the problem seems to have disappeared. I didn't no AFCI breaker. If it happens again I re-post.

  The powersupply Delta 460W HP HPE-180 t stock was causing my AFCI fires about 50% if the time. I have add a Seagate 1 TB hard drive for the system which I suspect caused the HP / Delta power on default of arc more frequently when starting up the load sent the power supply out of the frequency range of 50-60 hz.

  Being a loyal customer of HP, I actually bought 2 HPE-180 t in January 2010 and one for me and one for my son. My son is running his on a circuit which is not on fault of ARC and had no problems so far.

  Have a great day!

• Video card compatible for Pavilion 2009

  The motherboard is a 2A6C of Pegatron Corporation.

  [Nvidia Chipset: MCP61 Rev A3] [Nvidia Southbridge: MCP61 Rev A2]

  LPCIO: Door F8000.

  POWER SUPPLY: Bestec, 300W MAX.

  I have 4 GB of RAM in it right now. I bought some incompatible RAM cards that are 2 x 4.

  The current graphics "card" is an integrated Nvidia GeForce 6150SE nForce 430 [Core: 425, memory: 800 MHz, size: 256 MB].

  CPU: AMD Anthlon he's X 4 640

  I understand that I may upgrade my powersupply stock to add on a video card. But I don't want to put anything else at the moment. I put the bar to Diablo 3 settings means all about 30 fps. So much better, if you can not do without to upgrade the video card and power supply then my other options in the list please. Money is a problem, but I'll still hear you. I really want to paly games like Smite, Call of Duty, ect.

  Hello

  Looking for probably $ 150 for upgrades for your PC until the system requirements for Diablo III. If you don't want to spend $150 to get the Call of Duty and Diablo III to run the recommendations system by some gambling sites then look at another PC.

  The processor and the memory of your PC are very good.  What you need is a video card and a power supply upgrade.  Look at the #8 on this publication threadmessage.

• Chromebook 11 g2: Chromebook 11 g2 voltage 11v. and charger 5v?

  My slow chromebook costs. I bought it on ebay recently.

  He complains that the charger is low power, but it's not.  I tried a 3a and a charger 2

  chrome: \\system > powersupply indicates that the battery voltage is 11, 5V. and amperage under.5.

  Is it possible to load this with a 5v charger? These indications are correct?

  Thank you

  John C

  Thanks for your help

  I bought a spare magazine with the specifications you mentioned. It charges my Tablet about 1. 5. but only charges the g2 through 6-700 my.  So, I suspect a fault in the G2 as the G2 won't recharge and run at the same time with this amount of current. I don't want to invest in a brand charger if the g2 is defective.

  My post was mainly about the curious fact that the g2 battery seems to be 10 volts and I wondered how it could be if the charger provide only 5 volts. In any case, I guess I'll let it lie that the seller offered a partial refund.

  Thanks again,

  JohnC

• H520 Office upgrade for the games

  I have a H520, not the model (s). 1 terrabyte drive, 6 GB memmory, Intel i3-3240 3.40 GHz CPU. I bought my son Call of Duty Ghosts and it seems I need to update the graphics card vieo. Overlooking some other discussion, looks like I may have to upgrade the memmory and powersupply so. You can shed some light on this for me and a link to the technical manual. Help, please. Thank you.

  Choose a better brand of psu xfx, seasonic, corsair, antec, you can get a 500w or more

  CORSAIR CX series CX500 500W ATX12V v2.3 80 PLUS BRONZE certified Active PFC Power Supply
  $49.99
  $29.99 after $20.00 rebate card
  http://www.Newegg.com/product/product.aspx?item=N82E16817139027

• Is docking station compatible with computer model C6470 VB041AA #ABA?

  Is docking station compatible with computer model C6470 VB041AA #ABA?

  Hi Bryan,.

  You're right, the computer is a Probook 6470 B.  I also noticed in your chart that the docking station power is estimated at 90 watts.   How I plugged the power lists 65Watts on etiquette, which may explain why it does not work very well.  I think I must have caught an old powersupply in my bag for laptop computer to my upgrade of the previous work computers.  Another food I have is rated at 90 watts; I'll give this one a try.

  Thank you

  Pete

• Unknown channel or name of the repeated feature - settings MAX IVI

  Hi all

  I have problems with the creation of a pilot application based on IVI. I use Agilent N6700B PowerSupply simply configure and output voltage via GPIB with LV2009 (and Win7). The main issue is with the name of the 'channel' I need to specify in the application. Could someone please confirm ChannelName should I use and if the MAX settings are correct? I have attached all necessary files.

  When I run my application I get following "IviDCPwr IVI Converter.vi error error message

  The primary error: unknown channel (Hex 0xBFFA0020) or
  name of the feature repeated.

  Complete calling chain:      IVI IviDCPwr
  Error Converter.vi IviDCPwr
  Configure the output Range.vi GPIB.vi"

  Any help is very appreciated

  Kind regards

  PK

  Hi, PKI,

  The correct physical name for the channel is '1' and it was filled for you by the driver under the advanced > Instrument Driver Software Module (see MAX1.jpg). You can name your virtual channel name well you want under the pilot Sessions > section virtual names, but the physical name must always be 1 as specified in the driver (MAX2.jpg). In your application, make sure that you use exactly the same name for the virtual channel as recorded in MAX.

• Type of step IVI supports NI-SMU-4112?

  Hello, guys

  I have a SMU-4112 and four of the PXI-4130. When I try to configure my SMU-4112 with PowerSupply IVI step Type, an error occurred.

  -------------------------------

  An error occurred the call "RunStep" in "ISubstep" of "ZNIUGOL of Types of step TestStand Ivi"
  An error occurred during the execution of the step.
  Component works IVI control error: IVI configure failed for logical name ' 4112 ".
  Details: Attribute or property not supported. Attribute: NIDCPOWER_ATTR_OVP_ENABLED, Channel: 0 [IVI. Error Code: BFFA0012]
  Source: TSIviStepTypes

  --------------------------------

  Surely, I disabled the checkbox "OVP on" editing it IVI Power Supply stage dialogue. My system configuration is,

  IVI Compliance Package 4.6

  NOR-DCPower 1.8.6

  SP1 OR TestStand 2012

  My PXI - 4130 s work well with the type of step of IVI. Type of step IVI supports NI-SMU-4112? Or I do something wrong about this?

  Kind regards

  Joonam

  Hi Joonam,

  PowerSupply IVI step does not currently work with the 4112.

  The 4112 can't stand the ÖVP.  If the NIDCPOWER_ATTR_OVP_ENABLED attribute is set to True, the error you described is expected.  If it is set to False, no error should be generated.  However, an error is generated when it is set to false.  This is incorrect behavior in the pilot and has already been documented under the Corrective Action report (CAR) #437105.  This question will probably be corrected in a future version of NOR-DCPower.

  Step PowerSupply IVI is hardcoded in the attribute set to true or false, depending on the value of the checkbox in the tab limits.  Workaround for this problem is to replace your PowerSupply IVI step with a step based on a code module that does not seek to set the OVP_ENABLED attribute at all.

  I apologize for any inconvenience that this is for you.  Let me know if you want more details.